Search

Gallium oxide is a promising semiconductor with great potential for efficient power electronics due to its ultra-wide band gap and high breakdown electric field. Optimization of halide vapor phase epitaxy growth of heteroepitaxial [Formula: see text]-Ga 2 O 3 layers is demonstrated using a simulation model to predict the distribution of the ratio of gallium to oxygen precursors inside the reactor chamber. The best structural quality is obtained for layers grown at 825-850 °C and with a III/VI precursor ratio of 0.2. Although the structural and optical properties are similar, the surface morphology is more deteriorated for the [Formula: see text]-Ga 2 O 3 layers grown on 5 degree off-axis sapphire substrates compared to on-axis samples even for optimized process parameters. Cathodoluminescence with a peak at 3.3 eV is typical for unintentionally doped n-type [Formula: see text]-Ga 2 O 3 and shows the appearance of additional emissions in blue and green region at ~ 3.0, ~ 2.8, ~ 2.6 and ~ 2.4 eV, especially when the growth temperatures is lowered to 800-825 °C. Estimation of the band gap energy to ~ 4.65 eV from absorption indicates a high density of vacancy defects.

The use of metamaterial as a way to mitigate the negative effects of absorption in metals on the Purcell effect in metal-dielectric structures is investigated. A layered metal-dielectric structure is considered as an anisotropic medium in the long-wavelength limit. The dispersion of the surface plasmon appearing at the boundary between such a structure and a different dielectric material, as well as the position of the peak in the local density of states are studied for various combinations of materials and filling factors of the periodic structure. The calculated frequency dependence of the Purcell factor demonstrates an increase in peak value compared to the conventional plasmonic structure. The results obtained using effective media approach are compared to the results of numerical modelling.

Control over spontaneous emission rate is important for improving efficiency in different semiconductor applications including lasers, LEDs and photovoltaics. Usually, an emitter should be placed inside the cavity to increase the spontaneous emission rate, although it is technologically challenging. Here we experimentally demonstrate a phenomenon of super-radiance observed in a cavity-less periodic Bragg structure based on InAs monolayer-thick multiple quantum wells (MQW). The collective super-radiant mode shows enhanced emission rate for specific angles and frequencies. This behaviour correlates with the calculations demonstrating individual spots of the enhanced Purcell coefficient near the Bragg condition curve. This study provides a perspective for realization of surface emitting cavity-less lasers with distributed feedback.

Periodic metal-dielectric structures attract substantial interest since it was previously proposed that the spontaneous emission amplification rates (the Purcell factor) in such structures can reach enormous values up to 10 5 . However, the role of absorption in real metals has not been thoroughly considered. We provide a theoretical analysis showing that absorption leads to diminishing values of Purcell factor. We also suggest that using emitting organic compounds such as CBP (4,4-Bis(N-carbazolyl)-1,1-biphenyl) can lead to a moderate increase of about an order of magnitude in the Purcell factor. Defining the experimentally measured Purcell factor as a ratio between the excited state lifetimes in bare CBP and in periodic structure, this increase in the fabricated periodic structure is demonstrated through a 4-8 times decrease in excited state radiative lifetime compared to a bare organic material in a wide emission spectrum.

We have developed a method to fabricate GaN planar nanowires and cavities by combination of Focused Ion Beam (FIB) patterning of the substrate followed by Metal Organic Vapor Phase Epitaxy (MOVPE). The method includes depositing a silicon nitride mask on a sapphire substrate, etching of the trenches in the mask by FIB with a diameter of 40 nm with subsequent MOVPE growth of GaN within trenches. It was observed that the growth rate of GaN is substantially increased due to enhanced bulk diffusion of the growth precursor therefore the model for analysis of the growth rate was developed. The GaN strips fabricated by this method demonstrate effective luminescence properties. The structures demonstrate enhancement of spontaneous emission via formation of Fabry-Perot modes.

It was theoretically and experimentally demonstrated that in metal/semiconductor Tamm plasmon structures the probability of spontaneous emission can be increased despite losses in metal, and theoretical analysis of experimental results suggested that the enhancement could be as high as one order of magnitude. Tamm plasmon structure with quantum dots has been fabricated and the emission pattern has been measured. Electromagnetic modes of the structure have been analyzed and modification of spontaneous emission rates has been calculated showing a good agreement with experimentally observed emission pattern.

In the quest of developing high performance electronic and optical devices and more cost effective fabrication processes of monoclinic β-Ga 2 O 3 , new growth techniques and fundamental electronic and optical properties of defects have to be explored. By heating of dissolved metallic Ga in HCl in a NH 3 and N 2 atmosphere, nano-flake films of monoclinic β-phase Ga 2 O 3 were grown as confirmed by XRD. From optical measurements, we observe two strong emissions. A red band peaking at ~2.0 eV and a UV band at ~3.8 eV. The band at ~2.0 eV is attributed to donor-acceptor pair recombination where the donor and acceptor level is suggested to be related to V O and nitrogen, respectively. By studying the dependence of the intensity of the UV band at 3.8 eV versus excitation density, a model is suggested. In the model, it is assumed that local potential fluctuations forming minima (maxima), where the carriers would be localized with a summarized band offset for conduction and valence band of 1 eV. The origin of the fluctuations is tentatively suggested to be related to micro-inclusions of different phases in the film., Competing Interests: The authors declare no competing financial interests.

We report direct experimental evidence of the collective super-radiant mode in Bragg structure containing 60 InAs monolayer-based quantum wells (QWs) periodically arranged in GaAs matrix. Time-resolved photoluminescence measurements reveal an appearance of the additional super-radiant mode, originated from coherent collective interaction of QWs. This mode demonstrates a super-linear dependence of the intensity and radiative decay rate on the excitation power. The super-radiant mode is not manifested in the case if only a small number of QWs is excited.

The influence of the surrounding cavity on the efficiency of different types of polaritonic emitters of THz radiation has been analysed. It is demonstrated that THz lasing threshold in realistic structures cannot be achieved without a THz cavity, due to destruction of polaritons via excitonic Mott transition. Even modest values of cavity quality factor (not exceeding 50) provide significant quantum efficiency.