Search

Abstract The study was designed to explore the corrosion prevention capabilities of Citrullus colocynthis seeds alkaloid-rich extract (CSEA) on MS in a 1 M HCl environment by use of electrochemical and theoretical methods. Notably, Electrochemical Impedance Spectroscopy (EIS) and potentiodynamic polarization were used to probe the impact of immersion time and temperature. Energy-dispersive X-ray spectroscopy (EDX) and spanning electron microscopy (SEM) were used to confirm the presence of a protective layer on the substrate surface. Density functional theory (DFT) method was used to optimize the investigated species by use of B3LYP/6–31 + G(d, p) level of theory. The global and local quantum chemical reactivity descriptors were calculated to explore the inhibition corrosion efficiency and to identify the most favorable sites for electrophilic and nucleophilic attacks. Monte Carlo (MC) and molecular dynamics simulation (MDS) methods were used to study the interactions between corrosion inhibitor and metal surface. Noteworthy, results showed that CSEA exhibited an impressive inhibition efficiency, which reached 94.3% with a concentration of 2 g/L at 298 K. Potentiodynamic polarization revealed that the extract acted as a mixed-type inhibitor. Nyquist graphs showed that charge-transfer resistance and dæouble-layer capacitance both rised with increasing CSEA concentration, suggesting better inhibition efficiency. Notably, the Langmuir adsorption isotherm is well-aligned with the adsorption of inhibitor compounds. Importantly, all aforementioned theoretical methods were in agreement with the experimental findings. The outcome of the present work supported using Citrullus colocynthis seeds alkaloid-rich extract as ecofriendly agents to prevent corrosion.

Abstract Waste glass is hugely present in Morocco, and can be recycled for many geotechnical purposes, including road construction. In contrast, earthworks often produce significant amounts of clay waste that lack the necessary technical criteria for use as barriers. The present work aimed to study the influence of the addition of glass waste on the evolution of the mechanical characteristics of clays stabilized with crushed glass (particles less than 63 μm). The work consists of carrying out CBR, Proctor, and shear tests on natural clay taken as a reference and mixtures (clay-crushed glass) at different percentages. Results showed that the addition of glass to clay decreases the swelling and compaction indices along with modifying the intrinsic characteristics of the clay.

Abstract To eliminate lead (Pb) ions from metallic solutions, the cationic resin in solid form was utilized. The characterization of the adsorbent was performed using GTA/GTD, SEM spectroscopy, and EDX analysis. The results of these analyses provided insights into the structure and composition of the resin. The removal of Pb (II) ions was found to be highly dependent on various parameters. Firstly, the pH of the metal solution played a crucial role, as the adsorption capacity increased with the pH of the solution, at a maximum equal to (R = 84.78%), at a pH = 8.0. Additionally, the concentration of Pb (II) ions present in the solution influenced the adsorption technique’s capacity, with higher concentrations leading to increased adsorption, analysis overhead of high concentration present (100 mg L−1) of the metal lead (II) study, a saturation corresponding a plateau to the resin polymeric saturation is 93.18 mg g−1. To determine the optimal mass of the resin adsorbent, a study was conducted to maximize the removal of Pb (II) ions, at the mass 1.0 g showed that the proportion of inorganic pollutants removed from Pb (II) is entirely qualitative (100%). Furthermore, the effect of temperature on the adsorption process was investigated. It was observed that the rate of the Pb (II) adsorption process decreased as the temperature increased. Kinetic studies were performed to gain further insights into the adsorption process. Pseudo-first-order and pseudo-second-order models, along with the intra-particle diffusion model, were utilized for this purpose. The results indicated that the adsorption process was fast, as evidenced by the findings from the pseudo-second-order study. The saturation technical process was studied, employing several different isothermal models, including Langmuir, Freundlich, and Temkin. Among these models, the Langmuir model was found to best describe the phenomenon of lead metal adsorption by the resin polymeric, is equal to 11.23 mg g−1, with the experimental value precisely (R2 = 0.999). Finally, various thermodynamic techniques were applied to analyze the adsorption process. The thermodynamic parameters such as ΔG° (− 9.78 to − 9.27 kJ mol−1), ΔH° (14.85 kJ mol−1), and ΔS° (0.017 kJ mol−1) were determined. These values indicated that the adsorption process was endothermic and spontaneous, further emphasizing its impetuous nature. The results of the molecular dynamics calculations demonstrated that amino groups are very important in defining the characteristics of cation adsorption. We conclude that this new adsorbent has the potential to significantly improve the process of regularly removing heavy metal ions from wastewater.