Search

Abstract The study investigated the effects of temperature and centrifugation time on the efficacy of removing uncured resin from 3D-printed clear aligners. Using a photo-polymerizable polyurethane resin (Tera Harz TC-85, Graphy Inc., Seoul, Korea), aligners were printed and subjected to cleaning processes using isopropyl alcohol (IPA) or centrifugation (g-force 27.95g) at room temperature (RT, 23 °C) and high temperature (HT, 55 °C) for 2, 4, and 6 min. The control group received no treatment (NT). Cleaning efficiency was assessed through rheological analysis, weight measurement, transparency evaluation, SEM imaging, 3D geometry evaluation, stress relaxation, and cell viability tests. Results showed increased temperature and longer centrifugation times significantly reduced aligner viscosity, weight (P

Abstract This study aimed to compare the effectiveness of microcurrent-emitting toothbrushes (MCTs) and ordinary toothbrushes in reducing the dental plaque index (PI) and dental caries activity among orthodontic patients. The evaluation was performed using a crossover study design involving 22 orthodontic patients randomly assigned to the MCT or ordinary toothbrush groups. The participants used the designated toothbrush for 4 weeks and had a 1-week wash-out time before crossover to the other toothbrush. PI (Attin’s index) and dental caries activity were measured at baseline and at the end of each 4-week period. Additionally, patients completed questionnaires to assess patient satisfaction for “freshness in mouth” and “cleansing degree.” The results showed that the MCT group had a significant reduction in PI (p = 0.009), whereas the ordinary toothbrush group did not (p = 0.595). There was no significant difference in the dental caries activity between the two groups (p > 0.05). Patient satisfaction assessment revealed that 65% patients in the MCT group had more than “fair” experience of freshness, in contrast to 50% of patients in the ordinary toothbrush group. Satisfaction with cleansing degree was similar in both groups. Overall, these findings suggest that MCTs are more effective in reducing dental PI than ordinary toothbrushes.

Abstract We aimed to evaluate root parallelism and the dehiscence or fenestrations of virtual teeth setup using roots isolated from cone beam computed tomography (CBCT) images. Sixteen patients undergoing non-extraction orthodontic treatment with molar distalization were selected. Composite teeth were created by merging CBCT-isolated roots with intraoral scan-derived crowns. Three setups were performed sequentially: crown setup considering only the crowns, root setup-1 considering root alignment, and root setup-2 considering the roots and surrounding alveolar bone. We evaluated the parallelism and exposure of the roots and compared the American Board of Orthodontics Objective Grading System (ABO-OGS) scores using three-dimensionally printed models among the setups. The mean angulation differences between adjacent teeth in root setups-1 and -2 were significantly smaller than in the crown setup, except for some posterior teeth (p

Abstract The present study compared the thickness and gap width of thermoformed and 3D-printed clear aligners (CAs) using micro-computed tomography (micro-CT) and evaluated their translucency using spectrophotometer. Four groups of CAs were tested: thermoformed with polyethylene terephthalate glycol (TS) or copolyester-elastomer combination (TM), and 3D-printed TC-85 cleaned with alcohol (PA) or with centrifuge (PC). CIELab coordinates were measured (n = 10) to evaluate translucency. CAs (n = 10) were fitted onto respective models and micro-CT was performed to evaluate the thickness and gap width. Thickness and gap width were measured for different tooth type and location in sagittal sections on all sides. The PC group showed significantly higher translucency than the PA group, which was similar to the TS and TM groups (p

Abstract Low dose and accessibility have increased the application of cone beam computed tomography (CBCT). Often serial images are captured for patients to diagnose and plan treatment in the craniofacial region. However, CBCT images are highly variable and lack harmonious reproduction, especially in the head’s orientation. Though user-defined orientation methods have been suggested, the reproducibility remains controversial. Here, we propose a landmark-free reorientation methodology based on principal component analysis (PCA) for harmonious orientation of serially captured CBCTs. We analyzed three serial CBCT scans collected for 29 individuals who underwent orthognathic surgery. We first defined a region of interest with the proposed protocol by combining 2D rendering and 3D convex hull method, and identified an intermediary arrangement point. PCA identified the y-axis (anterioposterior) followed by the secondary x-axis (transverse). Finally, by defining the perpendicular z-axis, a new global orientation was assigned. The goodness of alignment (Hausdorff distance) showed a marked improvement (> 50%). Furthermore, we clustered cases based on clinical asymmetry and validated that the protocol was unaffected by the severity of the skeletal deformity. Therefore, it could be suggested that integrating the proposed algorithm as the preliminary step in CBCT evaluation will address a fundamental step towards harmonizing the craniofacial imaging records.

Abstract Orthodontic facemasks are extraoral orthodontic appliances that influence maxillary and mandibular development in children with skeletal Class III malocclusion. While a facemask is most effective in patients before the growth spurt, skin irritation is common during the treatment. Therefore, this retrospective study aimed to investigate the prevalence and pattern of such skin changes and identify their possible associated risk factors. We included 177 patients with skeletal Class III malocclusion who underwent facemask therapy. Patient age and sex, orthodontic parameters expressing the severity of malocclusion, the presence of complaints in the temporomandibular joint (TMJ) areas, and the level of patient cooperation were evaluated. Additionally, the severity and onset time of skin reactions were further analyzed. The results indicated that 43.5% of patients developed skin changes typical of irritant contact dermatitis. Skin irritation was significantly associated with the presence of TMJ complaints and female sex. Furthermore, skin irritation was more common in younger patients. Clinicians should pay special attention to the skin areas that come into contact with the appliance during each follow-up visit to detect potential problems. Moreover, patients and their parents should be given adequate information about the possibility, prevention, and management of skin problems during facemask therapy.

Abstract This cross-sectional study aimed to classify the radiographical characteristics of impacted maxillary canines that were surgically exposed following orthodontic traction and to find out which factor is most closely related to traction duration. This study enrolled 74 patients with 87 maxillary canines. Cone-beam computed tomography images, panoramic radiographs, and medical records were analyzed. Cystic-appearing lesion and resorption of adjacent roots were observed in 26.4% and 23.0% of cases, respectively. Impacted maxillary canines were mostly distributed in the lateral incisor area. The mean (± standard deviation) traction duration for the 47 teeth that met the study criteria was 13.9 (± 8.9) months. Impacted maxillary canines treated with surgical exposure and orthodontic traction showed increasing possibilities of palatal impaction and resorption of the adjacent root as they were located mesially (p

Abstract This study evaluates the accuracy and efficiency of automatic tooth segmentation in digital dental models using deep learning. We developed a dynamic graph convolutional neural network (DGCNN)-based algorithm for automatic tooth segmentation and classification using 516 digital dental models. We segmented 30 digital dental models using three methods for comparison: (1) automatic tooth segmentation (AS) using the DGCNN-based algorithm from LaonSetup software, (2) landmark-based tooth segmentation (LS) using OrthoAnalyzer software, and (3) tooth designation and segmentation (DS) using Autolign software. We evaluated the segmentation success rate, mesiodistal (MD) width, clinical crown height (CCH), and segmentation time. For the AS, LS, and DS, the tooth segmentation success rates were 97.26%, 97.14%, and 87.86%, respectively (p DS), the means of MD widths were 8.51, 8.28, and 8.63 mm, respectively (p AS > LS), the means of CCHs were 7.58, 7.65, and 7.52 mm, respectively (p DS, AS), and the means of segmentation times were 57.73, 424.17, and 150.73 s, respectively (p

Abstract To overcome the limitations of the conventional vacuum thermoforming manufacturing method, direct 3D printing of clear aligners has been developed. The present study investigated the thermo-mechanical and viscoelastic properties of a photocurable resin TC-85, which is a new material for the direct 3D printed clear aligners, comparing to a conventional thermoplastic material polyethylene terephthalate glycol. Dynamic mechanical analysis was performed to analyse the mechanical behaviours of the two materials at 37 °C and 80 °C, respectively. Furthermore, the shape memory property of the two materials was evaluated using a U-shape bending test, and the shape recovery ratio for 60 min at 37 °C was calculated. The results indicate that TC-85 can constantly apply a light force to the teeth when used for the 3D printed clear aligners, owing to its flexibility and viscoelastic properties. In addition, it is expected that the force decay induced by repeated insertion of the clear aligners will be reduced and a constant orthodontic force will be maintained. Furthermore, its geometric stability at high temperatures and the shape memory properties provide advantages for the clinical application.

Abstract To elucidate genetic factors affecting orthodontic treatment duration, we employed targeted next-generation sequencing on DNA from the saliva of 117 patients undergoing orthodontic treatment after premolar extraction. The clinical characteristics of patients are summarized, and the association of clinical variables with treatment duration was assessed. Patients whose treatment duration deviated from the average were classified into an extreme long group or an extreme short group. We identified nine single nucleotide polymorphisms (SNPs) of six genes that significantly differed in the two groups via targeted sequencing. The frequency of the CC genotypes of WNT3A, SPP1 (rs4754, rs9138), and TNFSF11, TT genotype of SPP1 (rs1126616), and GG genotype of SFRP2 was significantly higher in the extreme long group than in the short group. In the extreme short group, the TC genotype of SPP1, AA genotype of P2RX7, CT genotype of TNFSF11, and AG genotype of TNFRSF11A tended to exhibit higher frequency than in the long group. Taken together, we identified genetic polymorphisms related to treatment duration in Korean orthodontic patients undergoing premolar extraction. Our findings could lead to further studies predicting the prolongation of the orthodontic treatment duration, and will be of great aid to patients as well as orthodontists.

Abstract We evaluated whether the biological activity of the surface of titanium, when stored in an aqueous solution after ultraviolet (UV) treatment, is comparable to that of the surface immediately after UV treatment. We subjected Grade IV titanium discs with machined surfaces to UV radiation for 15 min and then tested them immediately and after storage for 28 days, with and without distilled H2O (dH2O). We evaluated the surface characteristics using surface profiling, contact angle analysis, X-ray photoelectron spectroscopy, and in terms of the surface zeta-potential. We determined the level of biological activity by analysing albumin adsorption, MC3T3-E1 and human mesenchymal cell adhesion and cytoskeleton development, as well as the production of intracellular reactive oxygen species between groups. The surface characteristics produced by the UV irradiation were maintained in dH2O for 28 days. We found that titanium stored in dH2O for 28 days after UV treatment exhibited enhanced protein adsorption, cell attachment, and cytoskeleton development. Titanium stored in dH2O for 28 days after UV irradiation exhibited a lower level of oxidative stress, comparable to that of the titanium immediately after UV treatment. UV treatment combined with wet storage can be used as a means of overcoming the biological aging of titanium.