Search

Novel customised carbon monoliths with a high specific surface area were synthesised by carbonisation plus activation of dehydrated whey powders, a biomass byproduct of the dairy industry. The whey powders were casted directly by pouring them into a desired mould. After a pseudo-sintering process promoted by the self-reaction of the whey components (mostly lactose and whey proteins) at moderate temperatures (ca. 250 °C), 3D porous carbons were obtained. The process did not require any binder or external overpressure to prepare the 3D porous carbons. Upon thermal activation with CO2 or chemical activation with H3PO4 and KOH, the shape of the monolithic structure was preserved after the development of a microporous network (SBET up to 2400 m2/g). Both thermal and chemical activation had little effect on the macroporosity of the monoliths. Activation of these 3D carbons had to be performed with care to avoid heterogeneous skin/core activation and/or overactivation. Highly porous monoliths (SBET of 980 m2/g; open porosity of 70%) with outstanding compressive strength (10 MPa) could be obtained by thermal activation (CO2) of whey monoliths at 850 °C for 1.5 h. Additionally, the use of whey as a precursor provided the carbon monolith with a relatively high nitrogen content (ca. 3 wt.%).

In this work, unsupported Pd aerogel catalysts were synthesized for the very first time by using microwaves as a heating source followed by a lyophilization drying process and used towards formic acid electro-oxidation in a microfluidic fuel cell. Aerogels were also made by heating in a conventional oven to evaluate the microwave effect during the synthesis process of the unsupported Pd aerogels. The performance of the catalysts obtained by means of microwave heating favored the formic acid electro-oxidation with H2SO4 as the electrolyte. The aerogels' performance as anodic catalysts was carried out in a microfluidic fuel cell, giving power densities of up to 14 mW cm-2 when using mass loads of only 0.1 mg on a 0.019 cm2 electrode surface. The power densities of the aerogels obtained by microwave heating gave a performance superior to the resultant aerogel prepared using conventional heating and even better than a commercial Pd/C catalyst.