Search

At present, snow depth inversion based on active microwave remote sensing is concerned essentially with areas having a relatively simple underlying surface. The existence of forests reduces the sensitivity of microwaves to snow, which often makes the snow depth inversion results uncertain. This paper presents a snow depth estimation algorithm for forest areas by introducing a forest phase to characterize the effect of forests on backscattering electromagnetic wave. Firstly, the interferogram is generated with the differential interference of two-pass master-slave Synthetic Aperture Radar (SAR) images, and the real phase under snow cover condition is obtained by phase unwrapping. Secondly, the phase models for forest and non-forest areas are constructed. The effects of forest cover are modeled as forest phase in the forest phase model, which is estimated under the assumption of snow depth consistency on both sides of the boundaries between forest and non-forest areas. Finally, snow depth is estimated by the snow phase-depth model. The correctness of the proposed forest snow depth inversion algorithm was verified by taking the Jiagedaqi area of Greater Xing’an Mountains as the study area and sentinel-1 dual polarization images as the data source. Finally, the snow depth distribution of the study area was obtained with a spatial resolution of 30 m on 7 December 2020. The experimental results show that the snow depth values estimated in Jiagedaqi area are mainly between 40–120 cm, and the average snow depth value is 80.27 cm. Taking the snow depth value of 84.69 cm reckoned from hourly accumulated snowfall in Jiagedaqi as the reference snow depth, the results of the estimated snow depth are relatively consistent and well-founded. With the introduction of the forest phase, the average snow depth values estimated in the forest area increase by 5.98 cm, which reduces the underestimation of the snow depth in forest areas.

Phase analysis based on high-quality pixel (HQP) is crucial to ensure the measurement accuracy of ground-based SAR (GB-SAR). The amplitude dispersion (ADI) criterion has been widely applied to identify pixels with high amplitude stability, i.e., permanent scatterers (PSs), which typically are point-wise scatterers such as stones or man-made structures. However, the PS number in natural scenes is few and limits the GB-SAR applications. This paper proposes an improved method to take HQP selection applied for natural scenes in GB-SAR interferometry. In order to increase the spatial density of HQP for phase measurement, three types of HQPs including PS, quasi-permanent scatter (QPS), and distributed scatter (DS), are selected with different criteria. The ADI method is firstly utilized to take PS selection. To select those pixels with high phase stability but moderate amplitude stability, the temporal phase coherence (TPC) is defined. Those pixels with moderate ADI values and high TPC are selected as QPSs. Then the feasibility of the DS technique is explored. To validate the feasibility of the proposed method, 2370 GB-SAR images of a natural slope are processed. Experimental results prove that the HQP number could be significantly increased while slightly sacrificing phase quality.

A large amount of fresh water resources are stored in the snowpack, which is the primary source of water for streamflow in many places at middle-to-high latitude areas. Therefore, snow water equivalent (SWE) is a key parameter in the water cycle. Active and passive microwave remote sensing methods have been used to retrieve SWE due to relatively poor resolution of current in situ interpolated maps with good accuracy. However, estimation of SWE has proved challenging, despite several decades of efforts to develop retrieval approaches. Active sensors provide higher-resolution observations. Two recent promising retrieval algorithms using active data are dual frequency dual polarization backscattered power and differential interferometry. These retrieval algorithms have some restrictions on snow characteristics, the environment, and instrument properties. The restrictions limit the snow that is suitable for the specific retrieval algorithm. In order to better understand how much of the snowpack satisfies the precondition of these retrieval approaches, we use a 4 km gridded snowpack product over the contiguous US for years 1997 and 2015. We use a simple scattering model to simulate the scattering characteristics of snow. The snow property maps, simulated scattering characteristics of snow, and environmental conditions are used to filter the suitable snow for each retrieval algorithm. We show that snow wetness and vegetation coverage are the two main limiting conditions for these retrieval algorithms. We show that 39% and 44% of the grid-points with snow satisfy the preconditions of dual polarization dual frequency retrieval algorithms at 13.5 GHz (one of the recommended frequencies for this algorithm in the literature) in 1997 and 2015, respectively. The most important limiting factors for dual polarization dual frequency retrieval method are dryness of snow, penetration depth, and vegetation-free constraints. The backscattered power in dual polarization dual frequency method is more sensitive to snow density and grain radius rather than to snow depth. We also show that 55% and 53% of the grid-points with snow satisfy the precondition of differential interferometry retrieval algorithms at 1 GHz (one of the recommended frequencies for this algorithm in the literature) in 1997 and 2015, respectively. The most important precondition-limiting factors for differential interferometry are dryness of snow and vegetation-free constraints. The differential interferometry phase retrieval algorithm is equally sensitive to snow height and snow density variations and is independent of snow grain radius.

Ground-based synthetic aperture radar interferometry (GB-InSAR) enables the continuous monitoring of areal deformation and can thus provide near-real-time control of the overall deformation state of dam surfaces. In the continuous small-scale deformation monitoring of a reservoir dam structure by GB-InSAR, the ground-based synthetic aperture radar (GB-SAR) image acquisition may be interrupted by multiple interfering factors, such as severe changes in the meteorological conditions of the monitoring area and radar equipment failures. As a result, the observed phases before and after the interruption cannot be directly connected, and the original spatiotemporal datum for the deformation measurement is lost, making the follow-up monitoring results unreliable. In this study, a multi-threshold strategy was first adopted to select coherent point targets (CPTs) by using successive GB-SAR image sequences. Then, we developed differential GB-InSAR with image subsets based on the CPTs to solve the dam surface deformation before and after aberrant interruptions. Finally, a deformation monitoring experiment was performed on an actual large reservoir dam. The effectiveness and accuracy of the abovementioned method were verified by comparing the results with measurements by a reversed pendulum monitoring system.