Search

The present work investigates how mechanical properties and ion dynamics in ionic liquids (ILs) can be affected by ILs’ design while considering possible relationships between different mechanical and transport properties. Specifically, we study mechanical properties of quaternary ionic liquids with rigid anions by means of Dynamical Mechanical Analysis (DMA). We are able to relate the DMA results to the rheological and transport properties provided by viscosity, conductivity, and diffusion coefficient measurements. A good agreement is found in the temperature dependence of different variables described by the Vogel−Fulcher−Tammann model. In particular, the mechanical spectra of all the measured liquids showed the occurrence of a relaxation, for which the analysis suggested its attribution to a diffusive process, which becomes evident when the ion dynamics are not affected by the fast structural reorganization of flexible anions on a local level.

The morphological changes of Si nanowires (Si NWs) cycled in 1:1 ethylene–carbonate (EC)/diethyl–carbonate (DEC) with or without different additives, fluoroethylene carbonate (FEC) or vinylene carbonate (VC), as well as the composition of the deposited solid–electrolyte interphase layer, are investigated by a combination of experimental microscopic and spectroscopic techniques. Scanning electron microscopy and optical spectroscopy highlight that the NW morphology is better preserved in samples cycled in the presence of FEC and VC additives compared to the additive-free electrolyte. However, only the use of FEC is capable of slightly mitigating the amorphization of silicon upon cycling. The solid electrolyte interphase (SEI) formed over the Si NWs cycled in the additive-free electrolyte is richer in organic and inorganic carbonates compared to the SEI grown in the presence of the VC and FEC additives. Furthermore, both additives are able to remarkably limit the degradation of the LiPF6 salt. Overall, the use of the FEC-additive in the carbonate-based electrolyte promotes both morphological and structural resilience of the Si NWs upon cycling thanks to the optimal composition of the SEI layer.

The hydrogen/deuterium sorption properties of Ni33Ti39Nb28 synthesized by the vacuum induction melting technique were measured between 400 and 495 °C for pressure lower than 3 bar. The Sieverts law is valid up to H(D)/M < 0.2 in its ideal form; the absolute values of the hydrogenation/deuteration enthalpy are ΔH(H2) = 85 ± 5 kJ/mol and ΔH(D2) = 84 ± 4 kJ/mol. From the kinetics of absorption, the diffusion coefficient was derived, and an Arrhenius dependence from the temperature was obtained, with Ea,d = 12 ± 1 kJ/mol for both hydrogen isotopes. The values of the alloy permeability, obtained by combining the solubility and the diffusion coefficient, were of the order of 10−9 mol m−1 s−1 Pa−0.5, a value which is one order of magnitude lower than that of Ni41Ti42Nb17, until now the best Ni-Ti-Nb alloy for hydrogen purification. In view of the simplicity of the technique here proposed to calculate the permeability, this method could be used for the preliminary screening of new alloys.

Novel ionic liquid (IL) electrolytes based on the asymmetric (fluoromethylsulfonyl)(trifluoromethylsulfonyl)imide (FTFSI)− anion, combined with the N-trimethyl-N-butyl-ammonium (N1114)+ and N,N-diethyl-N-methyl-N(2-methoxyethyl)-ammonium (N122(2O1))+ cations, were successfully synthesized and investigated in terms of thermal, vibrational and electrochemical properties. Thermogravimetric measurements revealed that the ionic liquids are stable up to 300 °C (2% mass loss). Differential scanning calorimetry measurements evidenced no phase transition down to −90 °C, suggesting a transition towards a glass state at lower temperatures. Infrared spectroscopy measurements, for the first time performed on ILs containing FTFSI, could not detect any crystallization down to −140 °C. The frequency of the main absorption bands of the ILs are in good agreement with DFT calculations. The FTFSI ionic liquid electrolytes, containing 20% mol of LiTFSI, show no solid-liquid phase transition due to the asymmetry of the FTFSI− anion, increasing the −10 °C conductivity up to 10−4 S cm−1. These interesting ion transport properties remarkably extend the operative temperature range down to low temperatures. The FTFSI electrolytes exhibit remarkable electrochemical stability up to 4.8 V, this making them appealing for realizing safer and highly reliable lithium battery systems operating at high voltages.

The replacement of cobalt in the lattice of lithium-rich layered oxides (LRLO) is mandatory to improve their environmental benignity and reduce costs. In this study, we analyze the impact of the cobalt removal from the trigonal LRLO lattice on the structural, thermodynamic, and electronic properties of this material through density functional theory calculations. To mimic disorder in the transition metal layers, we exploited the special quasi-random structure approach on selected supercells. The cobalt removal was modeled by the simultaneous substitution with Mn/Ni, thus leading to a p-doping in the lattice. Our results show that cobalt removal induces (a) larger cell volumes, originating from expanded distances among stacked planes, (b) a parallel increase of the layer buckling, (c) an increase of the electronic disorder and of the concentration of Jahn–Teller defects, and (d) an increase of the thermodynamic stability of the phase. Overall p-doping appears as a balanced strategy to remove cobalt from LRLO without massively deteriorating the structural integrity and the electronic properties of LRLO.

Pd–Ag alloys are largely used as hydrogen separation membranes and, as a consequence, the Pd–Ag–H system has been intensively studied. On the contrary, fewer information is available for the Pd–Ag–D system, thus, the aim of this work is to improve the knowledge of the isotope effect on the commercial Pd77Ag23 alloy, especially for temperature above 200 °C. In particular, deuterium absorption measurements are carried out in the Pd77Ag23 alloy in the temperature range between 79 and 400 °C and in the pressure range between 10−2 and 16 bar. In this exploited pressure (p) and composition (c) range, above 300 °C the pc isotherms display the typical shape of materials where only a solid solution of deuterium is present while at lower temperatures these curves seem to be better described by the coexistence of a solid solution and a deuteride in a large composition range. The obtained results are compared and discussed with the ones previously measured with the lightest hydrogen isotope. Such a comparison shows that the Pd77Ag23 alloy exhibits a clear inverse isotope effect, as the equilibrium pressure of the Pd–Ag–D system is higher than in Pd–Ag–H by a factor of ≈2 and the solubility of deuterium is about one half of that of hydrogen. In addition, the absorption measurements were used to assess the deuteration enthalpy that below 300 °C is ΔHdeut = 31.9 ± 0.3 kJ/mol, while for temperatures higher than 300 °C, ΔHdeut increases to 43 ± 1 kJ/mol. Additionally, in this case a comparison with the lighter isotope is given and both deuteration enthalpy values result lower than those reported for hydrogenation. The results described in this paper are of practical interest for applications operating above 200 °C, such as membranes or packing column, in which Pd77Ag23 has to interact with a gas stream containing both hydrogen isotopes.

The electrochemical stability windows (ESW) of selected ionic liquids have been calculated by comparing different computational approaches previously suggested in the literature. The molecular systems under study are based on di-alkyl imidazolium and tetra-alkyl ammonium cations coupled with two different imide anions (namely, bis-fluorosulfonyl imide and bis-trifluoromethyl sulfonyl imide), for which an experimental investigation of the ESW is available. Thermodynamic oxidation and reduction potentials have here been estimated by different models based on calculations either on single ions or on ionic couples. Various Density Functional Theory (DFT) functionals (MP2, B3LYP, B3LYP including a polarizable medium and empirical dispersion forces) were exploited. Both vertical and adiabatic transitions between the starting states and the oxidized or reduced states were considered. The approach based on calculations on ionic couples is not able to reproduce the experimental data, whatever the used DFT functional. The best quantitative agreement is obtained by calculations on single ions when the MP2 functional in vacuum is considered and the transitions between differently charged states are vertical (purely electronic without the relaxation of the structure). The B3LYP functional underestimates the ESW. The inclusion of a polar medium excessively widens the ESW, while a large shrinkage of the ESW is obtained by adopting an adiabatic transition scheme instead of a vertical transition one.

The infrared absorbance spectrum of the ionic liquid 1-butyl-1-methylpyrrolidinium dicyanamide, mixed with water at two different concentrations, was measured between 160 and 300K in the mid infrared range. Both mixtures do not crystallize on cooling, however, remarkably, the one with an ionic liquid (IL):water composition of 1:3 displays a cold crystallization process on heating in a restricted temperature range between 240 and 250K. A portion of the water participates to the cold crystallization. On the contrary, with an IL:water composition of 1:6.6 no crystallization takes place. Upon water addition the vibration frequencies of the anion and of some lines of the cation are blue shifted, while the absorption lines of water are red shifted. These facts are interpreted as the evidence of the occurrence of the hydrogen bonding of water, as the hydrogen bonding acceptor with respect to the anion (anion∙∙∙O-H bonds develop) and as hydrogen donor for the cation (C-H∙∙∙O bonds can form). Microscopic inhomogeneities in the samples and their evolution with temperature are discussed.

The infrared absorption spectrum of 1-ethyl-3-methylimidazolium trifluoromethanesulfonate (EMI&ndash, TfO) was investigated at ambient pressure and variable temperatures between 120 and 330 K, or at room temperature and variable pressures up to 10 GPa. Upon cooling, the ionic liquid crystallizes, on the contrary, upon compression no evidence of crystallization can be obtained from the infrared spectra. Moreover, Density Functional Theory (DFT) calculations were applied to gain a better description of the ionic couple. The &omega, B97X-D functional, including not only the empirical dispersion corrections but also the presence of a polar solvent, gives a good agreement with the infrared spectrum and suggests that TfO resides above the plane of the imidazolium, with the shorter distance between the O atom of the anion and the C2 atom of the imidazolium ring equal to 2.23 &Aring

A composite membrane based on a Nafion polymer matrix incorporating a non-stoichiometric calcium titanium oxide (CaTiO3&minus, &delta, ) additive was synthesized and characterized by means of thermal analysis, dynamic mechanical analysis, and broadband dielectric spectroscopy at different filler contents, namely two concentrations of 5 and 10 wt.% of the CaTiO3&minus, additive, with respect to the dry Nafion content, were considered. The membrane with the lower amount of additive displayed the highest water affinity and the highest conductivity, indicating that a too-high dose of additive can be detrimental for these particular properties. The mechanical properties of the composite membranes are similar to those of the plain Nafion membrane and are even slightly improved by the filler addition. These findings indicate that perovskite oxides can be useful as a water-retention and reinforcing additive in low-humidity proton-exchange membranes.

A large number of metallic alloys are currently under investigation in the field of hydrogen storage and hydrogen separation membranes. For such applications, the knowledge of the hydrogen diffusion coefficient in the given alloy is of great importance even if its direct measurement is not always easy to perform. In this view, the aim of this work is to describe an innovative procedure able to provide the lower limit of the hydrogen diffusion coefficient by performing hydrogen absorption kinetic experiments. Two different tools are presented: The first is a numerical code which solves the diffusion problem inside metals according to the general theory of the transport phenomena, and the second is a dimensional analysis that describes the dependence of the hydrogen diffusion coefficient from a few governing parameters. Starting from the results of several hydrogen absorption kinetic experiments performed on a Pd&ndash, Ag sample under different experimental conditions, the hydrogen diffusion coefficients were assessed by using both the described tools. A good agreement among the results obtained by means of the two procedures was observed.

Ni-Nb-Zr amorphous membranes, prepared by melt-spinning, show great potential for replacing crystalline Pd-based materials in the field of hydrogen purification to an ultrapure grade (>99.999%). In this study, we investigate the temperature evolution of the structure of an amorphous ribbon with the composition Ni32Nb28Zr30Cu10 (expressed in atom %) by means of XRD and DTA measurements. An abrupt structural expansion is induced between 240 and 300 °C by hydrogenation. This structural modification deeply modifies the hydrogen sorption properties of the membrane, which indeed shows a strong reduction of the hydrogen capacity above 270 °C.