Search

This paper reports the optical properties of zinc oxide nanofilm fabricated by using organic natural products from Salvia officinalis leaves (SOL) extract and discusses the effect of the nanocrystal (NC) structure (nanoyarn and nanomat-like structure) on nanofilm optical properties. The surface-active layer of the nanofilm of ZnO nanoparticles (ZnO NPs) was passivated with natural organic SOL leaves hydrothermally, then accumulated on zinc oxide nanorods (ZnO NRs). The nanofilms were fabricated (with and without PEO) on glass substrate (at 85 °C for 16 h) via chemical solution deposition (CSD). The samples were characterized by UV-vis, PL, FESEM, XRD, and TEM measurements. TEM micrographs confirmed the nucleation of ZnO NPs around 4 nm and the size distribution at 1.2 nm of ZnO QDs as an influence of the quantum confinement effect (QCE). The nanofilms fabricated with SOL surfactant (which works as a capping agent for ZnO NPs) represent distinct optoelectronic properties when compared to bulk ZnO. FESEM images of the nanofilms revealed nanoyarn and nanomat-like structures resembling morphologies. The XRD patterns of the samples exhibited the existence of ZnO nanocrystallites (ZnO NCs) with (100), (002), and (101) growth planes. The nanofilms fabricated represented a distinct optical property through absorption and broad emission, as the optical energy band gap reduced as the nanofilms annealed (at 120℃). Based on the obtained results, it was established that phytochemicals extracted from organic natural SOL leaves have a distinct influence on zoic oxide nanofilm fabrication, which may be useful for visible light spectrum trapping. The nanofilms can be used in photovoltaic solar cell applications.

Obtaining H2 energy from H2O using the most abundant solar radiation is an outstanding approach to zero pollution. This work focuses on studying the effect of Co doping and calcination on the structure, morphology, and optical properties of spin-coated SnO2 films as well as their photoelectrochemical (PEC) efficiency. The structures and morphologies of the films were investigated by XRD, AFM, and Raman spectra. The results confirmed the preparation of SnO2 of the rutile phase, with crystallite sizes in the range of 18.4–29.2 nm. AFM showed the granular structure and smooth surfaces having limited roughness. UV-Vis spectroscopy showed that the absorption spectra depend on the calcination temperature and the Co content, and the films have optical bandgap (Eg) in the range of 3.67–3.93 eV. The prepared samples were applied for the PEC hydrogen generation after optimizing the sample doping ratio, using electrolyte (HCl, Na2SO4, NaOH), electrode reusability, applied temperature, and monochromatic illumination. Additionally, the electrode stability, thermodynamic parameters, conversion efficiency, number of hydrogen moles, and PEC impedance were evaluated and discussed, while the SnO2 films were used as working electrodes and platinum sheet as an auxiliary or counter electrode (2-electrode system) and both were dipped in the electrolyte. The highest photocurrent (21.25 mA/cm2), number of hydrogen moles (20.4 mmol/h.cm2), incident photon-to-current change efficiency (6.892%@307 nm and +1 V), and the absorbed photon-to-current conversion efficiency (4.61% at ~500 nm and +1 V) were recorded for the 2.5% Co-doped SnO2 photoanode that annealed at 673 K.

A systematic treatment of the influence of the optical feedback (OFB) and the ratio of the radiative and the non-radiative recombination lifetime (τr/τnr) on the relative intensity noise (RIN) and the system dynamics of a semiconductor laser (SL) is presented. We found that the ratio τr/τnr causes a significant change in the intensity of noise, states, and route to chaos of such a system. Laser transit from a continuous wave (CW) to a periodic oscillation (PO) becomes faster in terms of the OFB strength by increasing the ratio τr/τnr. The route to chaos was identified in three distinct operating regions, namely, PO, period doubling (PD), and sub-harmonics (SH), which are dependent on the ratio τr/τnr, and injection current. In the route to chaos regime, the ratio τr/τnr triggers a slight shift in the frequency with reference to the frequency of the solitary laser. At upmost levels of the current, the highest value of the ratio τr/τnr stabilizes the laser and stimulates it to operate in CW or PO. In the strong OFB region, when the ratio τr/τnr increases, the chaotic operation changed to CW or PO operation and RIN is suppressed close to the quantum noise level.

This article is mainly a complementary study of a novel part of π-conjugated copolymers based on the poly (N-vinylcarbazole) (PVK) and poly (9,9-dioctylfluorene-co-bithiophene) (F8T2) unit based on the Density Functional Theory (DFT) and Time-Dependent Density Functional Theory (TD-DFT). This study is carried out to explore the structural and optoelectronic characteristics of a new organic material named PVK-F8T2. First, the structural, optical (absorption, photoluminescence, optical transition), electronic (molecular orbital (MO), energy-level diagram) and vibratory parameters of infrared (IR) were computed and compared with experimental studies. In addition, we calculated the level energy of the excited states and their corresponding transitions. Obviously, electronic parameters such as highest occupied and lowest unoccupied molecular orbital (HOMO and LUMO), ionization potential (IP), electronic affinity (EA) and the energy band gap (Eg) were computed in order to elucidate the intramolecular charge transport and to establish the energetic diagrams of the PVK-F8T2 copolymer for different states. The results obtained looked with precision at future optoelectronic applications. From these results, we have shown that the PVK-F8T2 has significant optoelectronic properties and seems usable as an active layer in organic light-emitting diodes (OLEDs).

Pesticide residues are harmful to the environment and human and animal health even at low levels because of long-term bioaccumulation. In this study, photolysis was applied to treat three representative water samples: aqueous atrazine and dimethoate solutions as target pesticides, as well as wastewater and agriculture wastewater containing pesticide residue. It was performed using ultraviolet (UV) irradiation at two wavelengths (254 and 306 nm) with exposure times ranging from 2 to 12 h in the presence and absence of a photocatalyst to identify the optimal degradation conditions. Extraction and analyzation process were performed by the Quick Easy Cheap Effective Rugged Safe (QuEChERS) methods and gas chromatography–tandem mass spectrometry with triple quadrupole detector (GC–MSMS/TQD), respectively. Photodegradation increased with an increase in exposure time and the TiO2 catalyst was beneficial for degradation. Both selected irradiation wavelengths were effective, although the wavelength of λ = 306 nm was the most efficient.