Search

Objectives: Thrombogenity of small-diameter vascular prostheses might be reduced by complete coverage of the luminal surface with vascular cells. We investigated cell seeding on polyurethane vascular prostheses., Methods: Thirty polyurethane vascular prostheses were divided into 3 groups of 10 each: group A, diameter of 20 mm and gamma-sterilized; group B, diameter of 4 mm and gamma-sterilized; and group C, diameter of 4 mm and ethylene oxide sterilized. Human smooth muscle cells, fibroblasts, and endothelial cells were isolated from saphenous vein segments and expanded in culture. Five polyurethane vascular prostheses of each group were seeded with endothelial cells alone (mean, 4.8 +/- 1.2 x 10(6) cells), and the remaining 5 polyurethane vascular prostheses were preseeded with a mixed culture of fibroblasts and smooth muscle cells (mean, 7.7 +/- 2.3 x 10(6) cells), followed by endothelial cell seeding (mean, 4.4 +/- 0.9 x 10(6) cells). Seven days after cell seeding, the polyurethane vascular prostheses were perfused under a pulsatile flow (80 pulses/min, 140/80 mm Hg, and 120 mL/min) for 2 hours. Specimens were taken after each seeding procedure both before and after perfusion and then examined both with a scanning electron microscope and immunohistochemically., Results: Isolated endothelial cell seeding revealed better initial adhesion in groups A and B than in group C (63% vs 33%). After 7 days, the cells had covered approximately 80% of the luminal surface in groups A and B, whereas group C cells rounded up and lost adhesion. After perfusion testing of group A and B prostheses, only 10% of the surface was still covered with endothelial cells. Preseeding with the mixed culture again revealed a better initial adhesion in groups A and B compared with that in group C (76% vs 41%). In groups A and B endothelial cell seeding (adhesion, 72%) resulted in a confluent endothelial cell layer. The results of immunohistochemical staining were positive for collagen IV, laminin, CD31, and Factor VIII. In group C only isolated cells were found after each seeding procedure, which rounded up and vanished during the next days. Perfusion testing of group A and B prostheses revealed that the confluent cell layer remained stable, with only small defects (<10% of the surface). The cells stained positivively for endothelial nitric oxide synthase., Conclusion: Seeding of a mixed culture out of fibroblasts and smooth muscle cells resulted in improved endothelial cell adhesion and resistance to shear stress. This outcome was caused by an increased synthesis of extracellular matrix proteins. Cell attachment was better on gamma-sterilized polyurethane vascular prostheses compared with on those undergoing ethylene oxide sterilization.

Objective: This study represents the development of a treatment and seeding procedure to improve endothelial cellular adhesion on glutaraldehyde-fixed valves., Methods: Porcine aortic valves were fixed with 0.2% glutaraldehyde. Wall pieces of these valves had either no additional treatment (n = 4), incubation in M199 Earle (1x), with sodium carbonate at 2.2 g/L without l-glutamine for 24 hours (n = 4), or additional pretreatment with 5%, 10%, or 15% citric acid (three groups, n = 4 each). Thereafter the pieces were washed and buffered to a physiologic pH. This was followed by seeding of human endothelial cells (5 x 10(6) cells). On the basis of the results of these pilot tests, complete glutaraldehyde-fixed aortic roots treated with 10% citric acid were subjected to cell seeding. The valves were seeded with endothelial cells (4.3 x 10(6) cells) either alone (n = 4) or in combination with preseeding of autologous fibroblasts (2.4 x 10(7) cells, n = 4). After each seeding procedure specimens of the free wall of the grafts were taken. In addition, one leaflet was taken for histologic examination after endothelial cell seeding, after 7 days, and after 21 days. Finally, two commercially available stentless aortic valve prostheses (Freestyle; Medtronic, Inc, Minneapolis, Minn) were treated with 10% citric acid and seeded with human fibroblasts and endothelial cells. Specimen were taken according to the glutaraldehyde-fixed aortic roots. Specimen of all experiments were examined with scanning electron microscopy. Frozen sections were stained immunohistochemically for collagen IV, factor VIII, and CD31., Results: On untreated glutaraldehyde-fixed aortic wall pieces, only poor adhesion (24%) was seen. No viable cells were found after 1 week. Cellular adhesion was best on aortic wall pieces pretreated with 10% citric acid. After 7 days, the cells formed a confluent layer. Endothelial cell seeding on citric acid-treated complete aortic valves showed 45% adhesion, but no confluent layer was found after 1 week. Preseeding of these valves with autologous fibroblasts resulted in an endothelial cellular adhesion of 76% and a confluent endothelial cell layer after 7 days. The layer remained stable for at least 21 days. Results of staining for collagen IV, factor VIII, and CD31 were positive on the luminal side of these valves, indicating the synthesis of matrix proteins and viability of the cells. Pretreatment of commercially available porcine valves with 10% citric acid and preseeding with autologous fibroblasts followed by endothelial cell seeding resulted in an adhesion of 78%. The cells formed a confluent cell layer after 7 days., Conclusions: Pretreatment of glutaraldehyde-fixed porcine aortic valves with citric acid established a surface more suitable for cellular attachment. Preseeding these valves with autologous fibroblasts resulted in a confluent endothelial cell layer on the luminal surface. Flow tests and animal experiments are necessary for further assessment of durability and shear stress resistance.

Objective: With the aim of performing a completely endoscopic coronary bypass anastomosis, we have undertaken an experimental and clinical study using robotic instrumentation and voice-controlled camera guidance., Methods: The ZEUS Robotic Surgical System (Computer Motion Inc, Goleta, Calif) consists of three interactive robotic arms and a control unit, allowing the surgeon to move the instrument arms in a scaled down mode. The third arm (AESOP, Computer Motion) positions the endoscope via voice control., Phase I: In a phantom model, vascular grafts were anastomosed to the left anterior descending coronary artery (LAD) of 50 pig hearts with either 2- or 3-dimensional visualization., Phase Ii: In 6 dogs (FBI 20-25 kg) the left internal thoracic artery (LITA) was harvested endoscopically. Then the animals were placed on an endovascular cardiopulmonary bypass system (Port-Access, Heartport, Inc, Redwood City, Calif). Anastomosis of the LITA to the LAD was performed endoscopically with the telemetric ZEUS instruments. Flow rates through the LITA were measured by Doppler analysis., Phase Iii: Two patients were operated on with the ZEUS system. After endoscopic harvesting of the LITA and cardiopulmonary bypass with the Port-Access system, the bypass graft (LITA-LAD) was anastomosed endoscopically with the ZEUS system through three thoracic ports., Results: In the dry laboratory, the time range required for the robotically assisted coronary anastomosis was 35 to 60 minutes with 2-dimensional visualization and 16 to 32 minutes with 3-dimensional visualization. In the animal experiments, the median time for endoscopic harvesting of the LITA was 86 minutes (range 56-120 minutes) and for the anastomosis, 42 minutes (range 35-105 minutes); flow rates through the LITA ranged between 22 and 45 mL/min. In the clinical cases, preparation times for the LITA were 83 and 110 minutes, respectively, and anastomosis times, 42 and 40 minutes, respectively. Doppler flow rates measured 125 and 85 mL/min, respectively. Both patients had an uneventful follow-up angiogram and postoperative course., Conclusions: With sophisticated robotic technology, a completely endoscopic anastomosis of the LITA to the LAD is possible, allowing technically precise operations within acceptable time limits.