Search

Sulfane sulfur, such as inorganic and organic polysulfide (HSn− and RSn−, n &gt, 2), is a common cellular component, produced either from hydrogen sulfide oxidation or cysteine metabolism. In Pseudomonas aeruginosa PAO1, LasR is a quorum sensing master regulator. After binding its autoinducer, LasR binds to its target DNA to activate the transcription of a suite of genes, including virulence factors. Herein, we report that the production of hydrogen sulfide and sulfane sulfur were positively correlated in P. aeruginosa PAO1, and sulfane sulfur was able to modify LasR, which generated Cys188 persulfide and trisulfide and produced a pentasulfur link between Cys201 and Cys203. The modifications did not affect LasR binding to its target DNA site, but made it several-fold more effective than unmodified LasR in activating transcription in both in vitro and in vivo assays. On the contrary, H2O2 inactivates LasR via producing a disulfide bond between Cys201 and Cys203. P. aeruginosa PAO1 had a high cellular sulfane sulfur and high LasR activity in the mid log phase and early stationary phase, but a low sulfane sulfur and low LasR activity in the declination phase. Thus, sulfane sulfur is a new signaling factor in the bacterium, adding another level of control over LasR-mediated quorum sensing and turning down the activity in old cells.

Although lithium-sulfur (Li-S) batteries are one of the promising candidates for next-generation energy storage, their practical implementation is limited by rapid capacity fading due to lithium polysulfide (LiPSs) formation and the low electronic conductivity of sulfur. Herein, we report a high-performance lithium-sulfur battery based on multidimensional cathode architecture consisting of nanosulfur, graphene nanoplatelets (2D) and multiwalled carbon nanotubes (1D). The ultrasonic synthesis method results in the generation of sulfur nanoparticles and their intercalation into the multilayered graphene nanoplatelets. The optimized multidimensional graphene-sulfur-CNT hybrid cathode (GNS58-CNT10) demonstrated a high specific capacity (1067 mAh g−1 @ 50 mA g−1), rate performance (539 @ 1 A g−1), coulombic efficiency (~95%) and cycling stability (726 mAh g−1 after 100 cycles @ 200 mA g−1) compared to the reference cathode. Superior electrochemical performances are credited to the encapsulation of nanosulfur between the individual layers of graphene nanoplatelets with high electronic conductivity, and effective polysulfide trapping by MWCNT bundles.

In lithium–sulfur cells, the dissolution and relocation of the liquid-state active material (polysulfides) lead to fast capacity fading and low Coulombic efficiency, resulting in poor long-term electrochemical stability. To solve this problem, we synthesize a composite using a gel polymer electrolyte and a separator as a functional membrane, coated with a layer of poly(ethylene oxide) (PEO) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). The PEO/LiTFSI-coated polypropylene membrane slows the diffusion of polysulfides and stabilizes the liquid-state active material within the cathode region of the cell, while allowing smooth lithium-ion transfer. The lithium-sulfur cells with the developed membrane demonstrate a high charge-storage capacity of 1212 mA∙h g−1, 981 mA∙h g−1, and 637 mA∙h g−1 at high sulfur loadings of 2 mg cm−2, 4 mg cm−2, and 6 mg cm−2, respectively, and maintains a high reversible capacity of 534 mA∙h g−1 after 200 cycles, proving its ability to block the irreversible diffusion of polysulfides and to maintain the stabilized polysulfides as the catholyte for improved electrochemical utilization and stability. As a comparison, reference and control cells fabricated using a PEO-coated polypropylene membrane and a regular separator, respectively, show a poor capacity of 662 mA∙h g−1 and a short cycle life of 50 cycles.

We have shown that autoxidized polyphenolic nutraceuticals oxidize H2S to polysulfides and thiosulfate and this may convey their cytoprotective effects. Polyphenol reactivity is largely attributed to the B ring, which is usually a form of hydroxyquinone (HQ). Here, we examine the effects of HQs on sulfur metabolism using H2S- and polysulfide-specific fluorophores (AzMC and SSP4, respectively) and thiosulfate sensitive silver nanoparticles (AgNP). In buffer, 1,4-dihydroxybenzene (1,4-DB), 1,4-benzoquinone (1,4-BQ), pyrogallol (PG) and gallic acid (GA) oxidized H2S to polysulfides and thiosulfate, whereas 1,2-DB, 1,3-DB, 1,2-dihydroxy,3,4-benzoquinone and shikimic acid did not. In addition, 1,4-DB, 1,4-BQ, PG and GA also increased polysulfide production in HEK293 cells. In buffer, H2S oxidation by 1,4-DB was oxygen-dependent, partially inhibited by tempol and trolox, and absorbance spectra were consistent with redox cycling between HQ autoxidation and H2S-mediated reduction. Neither 1,2-DB, 1,3-DB, 1,4-DB nor 1,4-BQ reduced polysulfides to H2S in either 21% or 0% oxygen. Epinephrine and norepinephrine also oxidized H2S to polysulfides and thiosulfate, dopamine and tyrosine were ineffective. Polyphenones were also examined, but only 2,5-dihydroxy- and 2,3,4-trihydroxybenzophenones oxidized H2S. These results show that H2S is readily oxidized by specific hydroxyquinones and quinones, most likely through the formation of a semiquinone radical intermediate derived from either reaction of oxygen with the reduced quinones, or from direct reaction between H2S and quinones. We propose that polysulfide production by these reactions contributes to the health-promoting benefits of polyphenolic nutraceuticals.

Reactive sulfane sulfur, including persulfide and polysulfide, is a type of regular cellular component, playing an antioxidant role. Its function may be organelle-dependent, however, the shortage of probes for detecting organellar reactive sulfane sulfur has hindered further investigation. Herein, we reported a red fluorescent protein (mCherry)-based probe for specifically detecting intracellular reactive sulfane sulfur. By mutating two amino acid residues of mCherry (A150 and S151) to cysteine residues, we constructed a mCherry mutant, which reacted with reactive sulfane sulfur to form an intramolecular &ndash, Sn&ndash, bond (n &ge, 3). The bond largely decreased the intensity of 610 nm emission (excitation at 587 nm) and slightly increased the intensity of 466 nm emission (excitation at 406 nm). The 466/610 nm emission ratio was used to indicate the relative abundance of reactive sulfane sulfur. We then expressed this mutant in the cytoplasm and mitochondria of Saccharomyces cerevisiae. The 466/610 nm emission ratio revealed that mitochondria had a higher level of reactive sulfane sulfur than cytoplasm. Thus, the mCherry mutant can be used as a specific probe for detecting reactive sulfane sulfur in vivo.

The development of long lifetime Li&ndash, S batteries requires new sulfur&ndash, carbon based composite materials that are able to suppress the shuttle effect&mdash, namely, the migration of soluble lithium polysulfides from the cathode to the anode of the cell. Graphene is one of the most promising carbon supports for sulfur, thanks to its excellent conductivity and to the possibility of tailoring its chemical&ndash, physical properties, introducing heteroatoms in its structure. By using first principle density functional theory simulations, this work aims at studying the effect of doping graphene with group III elements (B, Al, Ga) on its electronic properties and on its chemical affinity towards lithium polysulfides. Our results show that Al and Ga doping strongly modify the local structure of the lattice near heteroatom site and generate a charge transfer between the dopant and its nearest neighbor carbon atoms. This effect makes the substrate more polar and greatly enhances the adsorption energy of polysulfides. Our results suggest that Al- and Ga-doped graphene could be used to prepare cathodes for Li&ndash, S cells with improved performances and lifetime.

Excess sulfur has become a global problem in petrochemical industry. Inexpensive and easily available cottonseed oil (CSO) is still underutilized. To resolve these issues, bio-based polysulfide composites were prepared via inverse vulcanization of sulfur and CSO. The density of polysulfide composites was adjusted by fillers. The results showed that Elm and cattail as the fillers had no effects on the thermal properties and chemical structures of polysulfide composites. However, the morphologies of polysulfide composites were significantly influenced by the fillers. Different types and amounts of fillers produced significantly different holes and folds in the composites. The fillers were embedded in polysulfide composites by physical filling. This study provides an alternative and promising approach for preparing affordable density-adjustable bio-based polysulfide composite.

Lithium-sulfur battery (LSB) will become the next generation energy storage device if its severe shuttle effect and sluggish redox kinetics can be effectively addressed. Here, a unique three-dimensional hollow reduced graphene oxide microsphere decorated with ZnO nanoparticles (3D-ZnO/rGO) is synthesized to decrease the dissolution of lithium polysulfide (LiPS) into the electrolyte. The chemical adsorption of ZnO on LiPS is combined with the physical adsorption of 3D-rGO microsphere to synergistically suppress the shuttle effect. The obtained 3D-ZnO/rGO can provide sufficient space for sulfur storage, and effectively alleviate the repeated volume changes of sulfur during the cycle. When the prepared S-3D-ZnO/rGO was used as the cathode in LSB, an initial discharge specific capacity of 1277 mAh g&minus, 1 was achieved at 0.1 C. After 100 cycles, 949 mAh g&minus, 1 can still be maintained. Even at 1 C, a reversible discharge specific capacity of 726 mAh g&minus, 1 was delivered.

Polysulfide-derived polymers with a controllable density and mechanical strength were designed and prepared successfully using bio-based cottonseed oil (CO) and its derivatives, including fatty acid of cottonseed oil (COF) and sodium soap of cottonseed oil (COS). The reaction features of CO, COF and COS for polysulfide polymers were investigated and compared. Based on the free radical addition mechanism, COF reacts with sulfur to generate serials of polysulfide-derived polymers. COF strongly influences the density and tensile strength of these polymer composites. Whereas COS was not involved in the reaction with sulfur, as a filler, it could increase the density and tensile strength of polysulfide-derived polymers. Moreover, the results showed that these samples had an excellent reprocessability and recyclability. These polysulfide-based polymers, with an adjustable density and mechanical strength based on CO and derivatives, could have potential applications as bio-based functional supplementary additives.

Surface phenomena play the crucial role in the behavior of sulfide minerals in mineral processing of base and precious metal ores, including flotation, leaching, and environmental concerns. X-ray photoelectron spectroscopy (XPS) is the main experimental technique for surface characterization at present. However, there exist a number of problems related with complex composition of natural mineral systems, and instability of surface species and mineral/aqueous phase interfaces in the spectrometer vacuum. This overview describes contemporary XPS methods in terms of categorization and quantitative analysis of oxidation products, adsorbates and non-stoichiometric layers of sulfide phases, depth and lateral spatial resolution for minerals and ores under conditions related to mineral processing and hydrometallurgy. Specific practices allowing to preserve volatile species, e.g., elemental sulfur, polysulfide anions and flotation collectors, as well as solid/liquid interfaces are surveyed; in particular, the prospects of ambient pressure XPS and cryo-XPS of fast-frozen wet mineral pastes are discussed. It is also emphasized that further insights into the surface characteristics of individual minerals in technological slurries need new protocols of sample preparation in conjunction with high spatial resolution photoelectron spectroscopy that is still unavailable or unutilized in practice.

The superior ability of thiiranes (episulfides) to undergo ring-opening polymerization (ROP) in the presence of anionic initiators allows the preparation of chemically stable polysulfide homopolymers. Incorporation of elemental sulfur (S8) by copolymerization below the floor temperature of S8 permits the placement of a large quantity of sulfur atoms in the polysulfide mainchain. The utility of styrene sulfide (2-phenylthiirane, StS) for copolymerization with elemental sulfur is reported here. A few polysulfides differing depending on the initial ratio of S8 to StS and copolymerization time were synthesized. Various spectroscopic methods (1H NMR, 13C NMR, Raman spectroscopy and FTIR spectroscopy) were applied to characterize the chemical structure of the copolymers. Additionally, the phase structure and thermal stability of the synthesized polysulfides were investigated using DSC and TGA, respectively. The successful anionic copolymerization of styrene sulfide and elemental sulfur has been demonstrated.

Lithium–sulfur batteries (LSBs) have attracted wide attention, but the shuttle effect of polysulfide hinders their further practical application. Herein, we develop a new strategy to construct a Ketjen black@zeolite imidazole framework-8/polypropylene composite separator. Such a separator consists of Ketjen black (KB), zeolite imidazole framework-8 (ZIF-8) and polypropylene (PP) with a low coating load of 0.06 mg cm−2 and is denoted as KB@ZIF-8/PP. KB@ZIF-8/PP can absorb polysulfides because of the Lewis acid-base interaction between ZIF-8 and polysulfides. This interaction can reduce the dissolution of polysulfides and suppress the shuttle effect, thereby enhancing the electrochemical performance of the battery. When tested at a current density of 0.1 C, an LSB with a KB@ZIF-8/PP separator exhibits low polarization and achieves a high initial capacity of 1235.6 mAh/g and a high capacity retention rate of 59.27% after 100 cycles.

Lithium-sulfur batteries have received intensive attention, due to their high specific capacity, but the shuttle effect of soluble polysulfide results in a decrease in capacity. In response to this issue, we develop a novel tannic acid and Au nanoparticle functionalized separator. The tannic acid and gold nanoparticles were modified onto commercial polypropylene separator through a two-step solution process. Due to a large number of phenolic hydroxyl groups contained in the modified layer and the strong polarity of the gold nanoparticles, the soluble polysulfide generated during battery cycling is well stabilized on the cathode side, slowing down the capacity fade brought by the shuttle effect. In addition, the modification effectively improves the electrolyte affinity of the separator. As a result of these benefits, the novel separator exhibits improved battery performance compared to the pristine polypropylene separator.

Doxycycline (DOXY) is an antibiotic routinely prescribed in human and veterinary medicine for antibacterial treatment, but it has also numerous side effects that include oxidative stress, inflammation, cancer or hypoxia-induced injury. Endogenously produced hydrogen sulfide (H2S) and polysulfides affect similar biological processes, in which reactive oxygen species (ROS) play a role. Herein, we have studied the interaction of DOXY with H2S (Na2S) or polysulfides (Na2S2, Na2S3 and Na2S4) to gain insights into the biological effects of intermediates/products that they generate. To achieve this, UV-VIS, EPR spectroscopy and plasmid DNA (pDNA) cleavage assay were employed. Na2S or Na2S2 in a mixture with DOXY, depending on ratio, concentration and time, displayed bell-shape kinetics in terms of producing/scavenging superoxide and hydroxyl radicals and decomposing hydrogen peroxide. In contrast, the effects of individual compounds (except for Na2S2) were hardly observable. In addition, DOXY, as well as oxytetracycline and tetracycline, interacting with Na2S or other studied polysulfides reduced the &bull, cPTIO radical. Tetracyclines induced pDNA cleavage in the presence of Na2S. Interestingly, they inhibited pDNA cleavage induced by other polysulfides. In conclusion, sulfide and polysulfides interacting with tetracyclines produce/scavenge free radicals, indicating a consequence for free radical biology under conditions of ROS production and tetracyclines administration.

Hydrogen sulfide (H2S) is an important mediator of inflammatory processes. However, controversial findings also exist, and its underlying molecular mechanisms are largely unknown. Recently, the byproducts of H2S, per-/polysulfides, emerged as biological mediators themselves, highlighting the complex chemistry of H2S. In this study, we characterized the biological effects of P*, a slow-releasing H2S and persulfide donor. To differentiate between H2S and polysulfide-derived effects, we decomposed P* into polysulfides. P* was further compared to the commonly used fast-releasing H2S donor sodium hydrogen sulfide (NaHS). The effects on oxidative stress and interleukin-6 (IL-6) expression were assessed in ATDC5 cells using superoxide measurement, qPCR, ELISA, and Western blotting. The findings on IL-6 expression were corroborated in primary chondrocytes from osteoarthritis patients. In ATDC5 cells, P* not only induced the expression of the antioxidant enzyme heme oxygenase-1 via per-/polysulfides, but also induced activation of Akt and p38 MAPK. NaHS and P* significantly impaired menadione-induced superoxide production. P* reduced IL-6 levels in both ATDC5 cells and primary chondrocytes dependent on H2S release. Taken together, P* provides a valuable research tool for the investigation of H2S and per-/polysulfide signaling. These data demonstrate the importance of not only H2S, but also per-/polysulfides as bioactive signaling molecules with potent anti-inflammatory and, in particular, antioxidant properties.

An ideal high-loading carbon–sulfur nanocomposite would enable high-energy-density lithium–sulfur batteries to show high electrochemical utilization, stability, and rate capability. Therefore, in this paper, we investigate the effects of the nanoporosity of various porous conductive carbon substrates (e.g., nonporous, microporous, micro/mesoporous, and macroporous carbons) on the electrochemical characteristics and cell performances of the resulting high-loading carbon–sulfur composite cathodes. The comparison analysis of this work demonstrates the importance of having high microporosity in the sulfur cathode substrate. The high-loading microporous carbon–sulfur cathode attains a high sulfur loading of 4 mg cm−2 and sulfur content of 80 wt% at a low electrolyte-to-sulfur ratio of 10 µL mg−1. The lithium–sulfur cell with the microporous carbon–sulfur cathode demonstrates excellent electrochemical performances, attaining a high discharge capacity approaching 1100 mA∙h g−1, a high-capacity retention of 75% after 100 cycles, and superior high-rate capability of C/20–C/3 with excellent reversibility.

Hydrogen sulfide is frequently met in natural waters, like mineral springs, but mostly it is found in marine water with low renewal rate. The Black Sea has extremely high hydrogen sulfide content. It can be utilized in different ways, but the most promising one is direct conversion into electricity. This result can be attained by a sulfide-driven fuel cell (SDFC), converting sulfide to sulfate thus releasing electric energy up to 24 GJ/t. One of the most important problems is the mass transfer limitation on oxygen transfer in the cathode space of the fuel cell. This problem can be solved using a gas diffusion electrode or highly efficient saturation by oxygen in an ejector of the Venturi tube type. This work presents experimental data in laboratory-scale SDFC for sulfide conversion into sulfate, sulfite and polysulfide releasing different amounts of electric energy. Two types of aeration are tested: direct air blow and Venturi-tube ejector. Besides pure graphite, two catalysts, i.e., cobalt spinel and zirconia-doped graphite were tested as anodes. Experiments were carried out at initial sulfide concentrations from 50 to 300 mg/L. Sulfate, sulfite and thiosulfate ions were detected in the outlet solutions from the fuel cell. The electrochemical results show good agreement with the chemical analyses. Most of the results show attained high efficiencies of the fuel cell, i.e., up to 80%. The practical applications of this method can be extended for other purposes, like treatment of polluted water together with utilization as energy.

The global energy crisis and environmental problems are becoming increasingly serious. It is now urgent to vigorously develop an efficient energy storage system. Lithium-sulfur batteries (LSBs) are considered to be one of the most promising candidates for next-generation energy storage systems due to their high energy density. Sulfur is abundant on Earth, low-cost, and environmentally friendly, which is consistent with the characteristics of new clean energy. Although LSBs possess numerous advantages, they still suffer from numerous problems such as the dissolution and diffusion of sulfur intermediate products during the discharge process, the expansion of the electrode volume, and so on, which severely limit their further development. Graphene is a two-dimensional crystal material with a single atomic layer thickness and honeycomb bonding structure formed by sp2 hybridization of carbon atoms. Since its discovery in 2004, graphene has attracted worldwide attention due to its excellent physical and chemical properties. Herein, this review summarizes the latest developments in graphene frameworks, heteroatom-modified graphene, and graphene composite frameworks in sulfur cathodes. Moreover, the challenges and future development of graphene-based sulfur cathodes are also discussed.

Protein tyrosine phosphatases (PTPs) can be regulated by several redox-dependent mechanisms and control growth factor-activated receptor tyrosine kinase phosphorylation cascades. Reversible oxidation of PTPs is counteracted by reductive enzymes, including thioredoxin (Trx) and Trx-related protein of 14 kDa (TRP14), keeping PTPs in their reduced active states. Different modes of oxidative inactivation of PTPs concomitant with assessment of activating reduction have been little studied in direct comparative analyses. Determining PTP1B activities, we here compared the potency of inactivation by bicarbonate-assisted oxidation using H2O2 with that of polysulfide-mediated inactivation. Inactivation of pure PTP1B was about three times more efficient with polysulfides as compared to the combination of bicarbonate and H2O2. Bicarbonate alone had no effect on PTP1B, neither with nor without a combination with polysulfides, thus strengthening the notion that bicarbonate-assisted H2O2-mediated inactivation of PTP1B involves formation of peroxymonocarbonate. Furthermore, PTP1B was potently protected from polysulfide-mediated inactivation by either TRP14 or Trx1, in contrast to the inactivation by bicarbonate and H2O2. Comparing reductive activation of polysulfide-inactivated PTP1B with that of bicarbonate- and H2O2-treated enzyme, we found Trx1 to be more potent in reactivation than TRP14. Altogether we conclude that inactivation of PTP1B by polysulfides displays striking qualitative differences compared to that by H2O2 together with bicarbonate, also with regard to maintenance of PTP1B activity by either Trx1 or TRP14.

The lithium-sulfur (Li-S) redox battery system is considered to be the most promising next-generation energy storage technology due to its high theoretical specific capacity (1673 mAh g−1), high energy density (2600 Wh kg−1), low cost, and the environmentally friendly nature of sulfur. Though this system is deemed to be the next-generation energy storage device for portable electronics and electric vehicles, its poor cycle life, low coulombic efficiency and low rate capability limit it from practical applications. These performance barriers were linked to several issues like polysulfide (LiPS) shuttle, inherent low conductivity of charge/discharge end products, and poor redox kinetics. Here, we review the recent developments made to alleviate these problems through an electrocatalysis approach, which is considered to be an effective strategy not only to trap the LiPS but also to accelerate their conversion reactions kinetics. Herein, the influence of different chemical interactions between the LiPS and the catalyst surfaces and their effect on the conversion of liquid LiPS to solid end products are reviewed. Finally, we also discussed the challenges and perspectives for designing cathode architectures to enable high sulfur loading along with the capability to rapidly convert the LiPS.

The lithium-sulfur (Li-S) battery is one of the promising energy storage alternatives because of its high theoretical capacity and energy density. Factors governing the stability of polysulfide intermediates in Li-S batteries are complex and are strongly affected by the solvent used. Herein, the polysulfide reduction and the bond cleavage reactions are calculated in different solvent environments by the density functional theory (DFT) methods. We investigate the relationship between the donor numbers (DN) as well as the dielectric constants (ε) of the solvent system and the relative stability of different polysulfide intermediates. Our results show that the polysulfide reduction mechanism is dominated by its tendency to form the ion-pair with Li+ in different organic solvents.

This work investigated the effects of Fe3+, H+ and adsorbed leaching bacteria on the bioleaching of pentlandite. Collectively, an integrated model for the oxidation and decomposition of pentlandite was built to describe the behaviors of different components in a bioleaching system. Proton ions and ferric ions could promote the break and oxidation of Ni-S and Fe-S bonds. The iron-oxidizing microorganisms could regenerate ferric ions and maintain a high Eh value. The sulfur-oxidizing microorganisms showed significant importance in the oxidation of polysulfide and elemental sulfur. The atoms in pentlandite show different modification pathways during the bioleaching process: iron transformed through a (Ni,Fe)9S8 &rarr, Fe2+ &rarr, Fe3+ &rarr, KFe3(SO4)2(OH)6 pathway, nickel experienced a transformation of (Ni,Fe)9S8 &rarr, NiS &rarr, Ni2+, sulfur modified through the pathway of S2&minus, /S22&minus, &rarr, Sn2&minus, S0 &rarr, SO32&minus, SO42&minus, During bioleaching, a sulfur-rich layer and jarosite layer formed on the mineral surface, and the rise of pH value accelerated the process. However, no evidence for the inhibition of the layers was shown in the bioleaching of pentlandite at pH 3.00. This study provides a novel method for the extraction of nickel from pentlandite by bioleaching at elevated pH values.

The hyperthermo-piezophilic archaeon Palaeococcus pacificus DY20341T, isolated from East Pacific hydrothermal sediments, can utilize elemental sulfur as a terminal acceptor to simulate growth. To gain insight into sulfur metabolism, we performed a genomic and transcriptional analysis of Pa. pacificus DY20341T with/without elemental sulfur as an electron acceptor. In the 2001 protein-coding sequences of the genome, transcriptomic analysis showed that 108 genes increased (by up to 75.1 fold) and 336 genes decreased (by up to 13.9 fold) in the presence of elemental sulfur. Palaeococcus pacificus cultured with elemental sulfur promoted the following: the induction of membrane-bound hydrogenase (MBX), NADH:polysulfide oxidoreductase (NPSOR), NAD(P)H sulfur oxidoreductase (Nsr), sulfide dehydrogenase (SuDH), connected to the sulfur-reducing process, the upregulation of iron and nickel/cobalt transfer, iron&ndash, sulfur cluster-carrying proteins (NBP35), and some iron&ndash, sulfur cluster-containing proteins (SipA, SAM, CobQ, etc.). The accumulation of metal ions might further impact on regulators, e.g., SurR and TrmB. For growth in proteinous media without elemental sulfur, cells promoted flagelin, peptide/amino acids transporters, and maltose/sugar transporters to upregulate protein and starch/sugar utilization processes and riboflavin and thiamin biosynthesis. This indicates how strain DY20341T can adapt to different living conditions with/without elemental sulfur in the hydrothermal fields.

Fabrication of a nanocrystalline zinc oxide (ZnO)/nitrogen-doped graphene (NDG) composite using a novel and facile in situ sol-gel technique is demonstrated in this study. A two-dimensional nanostructured morphology with uniform ZnO nanoparticles (average diameter of 10 &plusmn, 4 nm) anchored on NDG nanosheets was observed via electron microscopy. The polar heteroatoms on the graphene sheets provided abundant sites for polysulfide absorption. More importantly, the strong chemical interaction between ZnO and polysulfides efficiently hindered the transport of polysulfides. Consequently, the lithium/sulfur (Li/S) battery with the ZnO/NDG composite-coated separator exhibited enhanced performance in terms of discharge capacity and cycling stability compared to the cell with a conventional separator. With the modified separator, the Li/S battery achieved a discharge capacity of 942 mAh&middot, g&minus, 1 after the first cycle and exhibited a capacity retention of 90.02% after the 200th charge/discharge test at 0.1 C. These results indicate that suppression of the shuttling of polysulfides efficiently improves the performance of the Li/S battery.

Ferrous sulfate (FeSO4) and calcium polysulfide (CaS5) stabilization are practical approaches to stabilizing hexavalent chromium (Cr(VI))-contaminated soil. The leachability and stability of Cr(VI) and Cr are important factors affecting the effectiveness of stabilized Cr(VI)-contaminated soil. This study compared the leachability and stability of Cr(VI) and Cr in Cr(VI)-contaminated soil stabilized by using FeSO4 and CaS5. The contaminated soil was characterized before and after stabilization, and the effectiveness of FeSO4 and CaS5 stabilization was assessed using leaching, bioaccessibility, alkaline digestion, sequential extraction, and X-ray diffraction tests. Results showed that FeSO4 and CaS5 significantly reduced the leachability and Cr(VI) content in the contaminated soil. The acid-buffering capacity and stability (leachability, bioaccessibility, speciation distribution, and mineral composition) of the Cr(VI)/Cr and Cr(VI) content of CaS5 were better than those of FeSO4. This study demonstrated that CaS5 had a better effect than FeSO4 on the stabilization of Cr(VI) in Cr(VI)-contaminated soil. The CaS5 significantly enhanced the stabilization and immobilization of Cr(VI) and reduced its leachability and toxicity.

Although numerous research efforts have been made for the last two decades, the chronic problems of lithium-sulphur batteries (LSBs), i.e., polysulfide shuttling of active sulphur material and surface passivation of the lithium metal anode, still impede their practical application. In order to mitigate these issues, we utilized polyimide functionalized glass microfibers (PI-GF) as a functional separator. The water-soluble precursor enabled the formation of a homogenous thin coating on the surface of the glass microfiber (GF) membrane with the potential to scale and fine-tune: the PI-GF was prepared by simple dipping of commercial GF into an aqueous solution of poly(amic acid), (PAA), followed by thermal imidization. We found that a tiny amount of polyimide (PI) of 0.5 wt.% is more than enough to endow the GF separator with useful capabilities, both retarding polysulfide migration. Combined with a free-standing microporous carbon cloth-sulphur composite cathode, the PI-GF-based LSB cell exhibits a stable cycling over 120 cycles at a current density of 1 mA/cm2 and an areal sulphur loading of 2 mgS/cm2 with only a marginal capacity loss of 0.099%/cycle. This corresponds to an improvement in cycle stability by 200%, specific capacity by 16.4%, and capacity loss per cycle by 45% as compared to those of the cell without PI coating. Our study revealed that a simple but synergistic combination of porous carbon supporting material and functional separator enabled us to achieve high-performance LSBs, but could also pave the way for the development of practical LSBs using the commercially viable method without using complicated synthesis or harmful and expensive chemicals.

It was in the 1950s that the term polysulfide or persulfide was introduced in biological studies. The unfamiliar term "sulfane sulfur" sometimes appeared in papers published in the 1970s, and was defined in the review article by Westley in 1983. In the article, sulfane sulfur is described as sulfur atoms that are covalently bound only with sulfur atoms, and as this explanation was somewhat difficult to comprehend, it was not generally accepted. Thus, in the early 1990s, we redefined these sulfur species as "bound sulfur", which easily converts to hydrogen sulfide on reduction with a thiol reducing agent. In other words, bound sulfur refers to a sulfur atom that exists in a zero to divalent form (0 to -2). The first part of this review focuses on the fluorescent derivatization HPLC method-which we developed for measurement of bound sulfur-and explains the distribution of bound sulfur and the hydrogen sulfide-producing ability of various tissues, as clarified by this method. Next, we discuss diverse physiological functions and involvement of polysulfide, a typical type of bound sulfur, in the redox regulation system. Additionally, we also address its possible physiological role in the central nervous system, based on its action of scavenging reactive carbonyl compounds.