Search

Nanoscale-engineered surfaces induce regulated strain in atomic layers of 2D materials that could be useful for unprecedented photonics applications and for storing and processing quantum information. Nevertheless, these strained structures need to be investigated extensively. Here, we present texture-induced strain distribution in single-layer WS2 (1L-WS2) transferred over Si/SiO2 (285 nm) substrate. The detailed nanoscale landscapes and their optical detection are carried out through Atomic Force Microscopy, Scanning Electron Microscopy, and optical spectroscopy. Remarkable differences have been observed in the WS2 sheet localized in the confined well and at the periphery of the cylindrical geometry of the capped engineered surface. Raman spectroscopy independently maps the whole landscape of the samples, and temperature-dependent helicity-resolved photoluminescence (PL) experiments (off-resonance excitation) show that suspended areas sustain circular polarization from 150 K up to 300 K, in contrast to supported (on un-patterned area of Si/SiO2) and strained 1L-WS2. Our study highlights the impact of the dielectric environment on the optical properties of two-dimensional (2D) materials, providing valuable insights into the selection of appropriate substrates for implementing atomically thin materials in advanced optoelectronic devices.

Cleidocranial dysplasia (CCD) is a rare genetic defect caused by a heterozygous mutation of runt-related transcription factor 2 (RUNX2), which is important for osteoblast and skeletal development. RUNX2-deficiency causes extra- and intra-oral malformations that often require orthodontic treatment. Nicotinamide (NAM) affects bone remodelling processes. As these are crucial for orthodontic therapy, NAM could improve orthodontic treatment in CCD patients. This study investigates the effect of NAM in control and RUNX2-deficient osteoblasts under mechanical strain mimicking orthodontic treatment. First, the optimal NAM concentration and the differences in the expression profile of control and RUNX2-deficient osteoblasts were determined. Subsequently, osteoblasts were exposed to tensile and compressive strain with and without NAM, and the expression of genes critically involved in bone remodelling was investigated. NAM increased the expression of bone remodelling genes. RUNX2-deficient osteoblasts expressed more receptor activator of NFkB ligand (RANKL) and interleukin-6 (IL6), but less colony-stimulating factor-1 (CSF1). Most of the positive effects of NAM on bone remodelling genes were impaired by mechanical loading. In conclusion, NAM stimulated osteoblast differentiation by increasing the expression of RUNX2 and regulated the expression of osteoclastogenic factors. However, the positive effects of NAM on bone metabolism were impaired by mechanical loading and RUNX2 deficiency.

Nanoscale-engineered surfaces induce regulated strain in atomic layers of 2D materials that could be useful for unprecedented photonics applications and for storing and processing quantum information. Nevertheless, these strained structures need to be investigated extensively. Here, we present texture-induced strain distribution in single-layer WS 2 (1L-WS 2 ) transferred over Si/SiO 2 (285 nm) substrate. The detailed nanoscale landscapes and their optical detection are carried out through Atomic Force Microscopy, Scanning Electron Microscopy, and optical spectroscopy. Remarkable differences have been observed in the WS 2 sheet localized in the confined well and at the periphery of the cylindrical geometry of the capped engineered surface. Raman spectroscopy independently maps the whole landscape of the samples, and temperature-dependent helicity-resolved photoluminescence (PL) experiments (off-resonance excitation) show that suspended areas sustain circular polarization from 150 K up to 300 K, in contrast to supported (on un-patterned area of Si/SiO 2 ) and strained 1L-WS 2 . Our study highlights the impact of the dielectric environment on the optical properties of two-dimensional (2D) materials, providing valuable insights into the selection of appropriate substrates for implementing atomically thin materials in advanced optoelectronic devices.

Excessive mechanical strain is the prominent risk factor for osteoarthritis (OA), causing cartilage destruction and degeneration. However, the underlying molecular mechanism contributing to mechanical signaling transduction remains unclear in OA. Piezo type mechanosensitive ion channel component 1 (Piezo1) is a calcium-permeable mechanosensitive ion channel and provides mechanosensitivity to cells, but its role in OA development has not been determined. Herein, we found up-regulated expression of Piezo1 in OA cartilage, and that its activation contributes to chondrocyte apoptosis. The knockdown of Piezo1 could protect chondrocytes from apoptosis and maintain the catabolic and anabolic balance under mechanical strain. In vivo, Gsmtx4, a Piezo1 inhibitor, markedly ameliorated the progression of OA, inhibited the chondrocyte apoptosis, and accelerated the production of the cartilage matrix. Mechanistically, we observed the elevated activity of calcineurin (CaN) and the nuclear transfection of nuclear factor of activated T cells 1 (NFAT1) under mechanical strain in chondrocytes. Inhibitors of CaN or NFAT1 rescued the pathologic changes induced by mechanical strain in chondrocytes. Overall, our findings revealed that Piezo1 was the essential molecule response to mechanical signals and regulated apoptosis and cartilage matrix metabolism via the CaN/NFAT1 signaling axis in chondrocytes, and that Gsmtx4 could be an attractive therapeutic drug for OA treatment.

We present the design of Ge/Si avalanche photodetectors with SiN stressor-induced Ge strain for the C+L band light detection. By optimizing the placement position and thickness of the SiN layer with compressive stress, a uniform strain distribution with a maximum magnitude of 0.59% was achieved in Ge. The surface-illuminated APDs have been studied in respect of the photo-dark current, responsivity, gain, and 3-dB bandwidth. After introducing SiN stressor, the APD exhibits high primary responsivity of 0.80 A/W at 1.55 μm, 0.72 A/W at 1.625 μm, and 3-dB bandwidth of 17.5 GHz. The increased tensile strain in Ge can significantly improve the responsivity and broaden the response band of the device. This work provides a constructive approach to realizing high-responsivity high-speed Ge/Si APD working in the C+L band.

In this work, VO2 based thermal sensing thin film synthesized on flexible muscovite substrates by direct oxidation of deposited vanadium metal, were investigated for the impact of doping and strain on their electrical properties. We investigated both undoped and Ti doped VO2 on muscovite substrate and compared with those on Quartz substrate. Both doped and undoped VO2 were found to undergo phase transition due to effect of heat as well as mechanical strain on muscovite substrate. On the other hand, the Ti doped VO2, on both quartz and muscovite substrate showed significant reduction in the transition temperature compared to the undoped VO2 thin films on these two substrates. When subjected to mechanical strain, the VO2 thin film on muscovite substrates resulted in a decrease or an increase in resistance depending on whether the applied strain was tensile or compressive, respectively. The resistance change was also steeper around the transition temperature compared to room temperature, exhibiting high gauge factor. This metal doped VO2 on flexible muscovite substrate has the significantly low transition temperature which causes the VO2 film to undergo phase transition at a near-room temperature and enables it to be used as a temperature sensor with enhanced sensitivity.

The concentration of melatonin is elevated during the night when patients mainly wear removable orthodontic appliances. Next to periodontal ligament fibroblasts and osteoblasts, macrophages react to mechanical strain with an increased expression of inflammatory mediators. Here, we investigated the impact of melatonin on RAW264.7 macrophages exposed to tensile or compressive strain occurring during orthodontic tooth movement in the periodontal ligament. Before exposure to mechanical strain for 4 h, macrophages were pre-incubated with different melatonin concentrations for 24 h, to determine the dependence of melatonin concentration. Afterwards, we performed experiments with and without mechanical strain, the most effective melatonin concentration (25 µM), and the melatonin receptor 2 (MT2) specific antagonist 4P-PDOT. The expression of inflammatory genes and proteins was investigated by RT-qPCR, ELISAs, and immunoblot. Both tensile and compressive strain increased the expression of the investigated inflammatory factors interleukin-1-beta, interleukin-6, tumor necrosis factor alpha, and prostaglandin endoperoxide synthase-2. This effect was inhibited by the addition of melatonin. Incubation with 4P-PDOT blocked this anti-inflammatory effect of melatonin. Melatonin had an anti-inflammatory effect on macrophages exposed to mechanical strain, independent of the type of mechanical strain. As inhibition was possible with 4P-PDOT, the MT2 receptor might be involved in the regulation of the observed effects.

Childhood obesity is a growing problem in industrial societies and associated with increased leptin levels in serum and salvia. Orthodontic treatment provokes pressure and tension zones within the periodontal ligament, where, in addition to fibroblasts, macrophages are exposed to these mechanical loadings. Given the increasing number of orthodontic patients with these conditions, insights into the effects of elevated leptin levels on the expression profile of macrophages during mechanical strain are of clinical interest. Therefore, the aim of this in vitro study was to assess the influence of leptin on the expression profile of macrophages during simulated orthodontic treatment. RAW264.7 macrophages were incubated with leptin and lipopolysaccharides (LPS) from Porphyromonas gingivalis (P. gingivalis) or with leptin and different types of mechanical strain (tensile, compressive strain). Expression of inflammatory mediators including tumor necrosis factor (TNF), Interleukin-1-B (IL1B), IL6, and prostaglandin endoperoxide synthase (PTGS2) was assessed by RT-qPCR, ELISAs, and immunoblot. Without additional mechanical loading, leptin increased Tnf, Il1b, Il6, and Ptgs2 mRNA in RAW264.7 macrophages by itself and after stimulation with LPS. However, in combination with tensile or compressive strain, leptin reduced the expression and secretion of these inflammatory factors. By itself and in combination with LPS from P. gingivalis, leptin has a pro-inflammatory effect. Both tensile and compressive strain lead to increased expression of inflammatory genes. In contrast to its effect under control conditions or after LPS treatment, leptin showed an anti-inflammatory phenotype after mechanical stress.

Lamins are intermediate filaments that play a crucial role in sensing mechanical strain in the nucleus of cells. β-catenin and megakaryoblastic leukemia-1 (MKL1) are critical signaling molecules that need to be translocated to the nucleus for their transcription in response to mechanical strain that induces osteogenesis. However, the exact molecular mechanism behind the translocation of these molecules has not been fully investigated. This study used 10% cyclic strain to induce osteogenesis in the murine osteoblast precursor cell line (MC3T3). The translocation of β-catenin and MKL1 was studied by performing knockdown and overexpression of lamin A/C (LMNA). Cyclic strain increased the expression of osteogenic markers such as alkaline phosphatase (ALP), runt-related transcription factor 2 (RUNX2), and enhanced ALP staining after seven days of incubation. Resultantly, MKL1 and β-catenin were translocated in the nucleus from the cytoplasm during the stress-induced osteogenic process. Knockdown of LMNA decreased the accumulation of MKL1 and β-catenin in the nucleus, whereas overexpression of LMNA increased the translocation of these molecules. In conclusion, our study indicates that both MKL1 and β-catenin molecules are dependent on the expression of LMNA during strain-induced osteogenesis.

Orthodontic treatment to correct dental malocclusions leads to the formation of pressure zones in the periodontal ligament resulting in a sterile inflammatory reaction, which is mediated by periodontal ligament fibroblasts (PDLF). Leptin levels are elevated in obesity and chronic inflammatory responses. In view of the increasing number of orthodontic patients with these conditions, insights into effects on orthodontic treatment are of distinct clinical relevance. A possible influence of leptin on the expression profile of PDLF during simulated orthodontic mechanical strain, however, has not yet been investigated. In this study, PDLF were exposed to mechanical strain with or without different leptin concentrations. The gene and protein expression of proinflammatory and bone-remodelling factors were analysed with RT-qPCR, Western-blot and ELISA. The functional analysis of PDLF-induced osteoclastogenesis was analysed by TRAP (tartrate-resistant acid phosphatase) staining in coculture with human macrophages. Pressure-induced increase of proinflammatory factors was additionally elevated with leptin treatment. PDLF significantly increased RANKL (receptor activator of NF-kB ligand) expression after compression, while osteoprotegerin was downregulated. An additional leptin effect was demonstrated for RANKL as well as for subsequent osteoclastogenesis in coculture after TRAP staining. Our results suggest that increased leptin concentrations, as present in obese patients, may influence orthodontic tooth movement. In particular, the increased expression of proinflammatory factors and RANKL as well as increased osteoclastogenesis can be assumed to accelerate bone resorption and thus the velocity of orthodontic tooth movement in the orthodontic treatment of obese patients.

Organ-on-a-chip (OOC) uses the microfluidic 3D cell culture principle to reproduce organ- or tissue-level functionality at a small scale instead of replicating the entire human organ. This provides an alternative to animal models for drug development and environmental toxicology screening. In addition to the biomimetic 3D microarchitecture and cell–cell interactions, it has been demonstrated that mechanical stimuli such as shear stress and mechanical strain significantly influence cell behavior and their response to pharmaceuticals. Microfluidics is capable of precisely manipulating the fluid of a microenvironment within a 3D cell culture platform. As a result, many OOC prototypes leverage microfluidic technology to reproduce the mechanically dynamic microenvironment on-chip and achieve enhanced in vitro functional organ models. Unlike shear stress that can be readily generated and precisely controlled using commercial pumping systems, dynamic systems for generating proper levels of mechanical strains are more complicated, and often require miniaturization and specialized designs. As such, this review proposes to summarize innovative microfluidic OOC platforms utilizing mechanical actuators that induce deflection of cultured cells/tissues for replicating the dynamic microenvironment of human organs.

Genetic predisposition, traumatic events, or excessive mechanical exposure provoke arthritic changes in the temporomandibular joint (TMJ). We analysed the impact of mechanical stress that might be involved in the development and progression of TMJ osteoarthritis (OA) on murine synovial fibroblasts (SFs) of temporomandibular origin. SFs were subjected to different protocols of mechanical stress, either to a high-frequency tensile strain for 4 h or to a tensile strain of varying magnitude for 48 h. The TMJ OA induction was evaluated based on the gene and protein secretion of inflammatory factors (Icam-1, Cxcl-1, Cxcl-2, Il-1ß, Il-1ra, Il-6, Ptgs-2, PG-E2), subchondral bone remodelling (Rankl, Opg), and extracellular matrix components (Col1a2, Has-1, collagen and hyaluronic acid deposition) using RT-qPCR, ELISA, and HPLC. A short high-frequency tensile strain had only minor effects on inflammatory factors and no effects on the subchondral bone remodelling induction or matrix constituent production. A prolonged tensile strain of moderate and advanced magnitude increased the expression of inflammatory factors. An advanced tensile strain enhanced the Ptgs-2 and PG-E2 expression, while the expression of further inflammatory factors were decreased. The tensile strain protocols had no effects on the RANKL/OPG expression, while the advanced tensile strain significantly reduced the deposition of matrix constituent contents of collagen and hyaluronic acid. The data indicates that the application of prolonged advanced mechanical stress on SFs promote PG-E2 protein secretion, while the deposition of extracellular matrix components is decreased.

Background: Cyclin D1 regulates cyclin-dependent protein kinase activity of the cell cycle, and cyclin D1 alternative splicing generates a cyclin D1b isoform, acting as a mediator of aberrant cellular proliferation. As alternative splicing processes are sensitive to mechanical stimuli, whether the alternative splicing of cyclin D1 is regulated by mechanical stress and what kinds of factors may act as the regulator of mechano-induced alternative splicing remain unknown. Methods: The alternative splicing of Cyclin D1 was examined using reverse transcription polymerase chain reaction (RT-PCR) in osteoblast cell lines and keratinocyte cells loaded by a cyclic stretch. The expression of splicing factors and switching defective/sucrose non-fermenting (SWI/SNF) complex subunits were detected in stretched cells using real-time quantitative PCR (RT-qPCR). The protein interaction was tested by co-immunoprecipitation assay (Co-IP). Results:Cyclin D1 expression decreased with its splice variant upregulated in stretched cells. Serine/arginine-rich splicing factor 1 (SRSF1) and SWI/SNF complex subunit Brahma-related gene-1-associated factor 57 (BAF57), also named SWI/SNF-related matrix-associated actin-dependent regulator of chromatin subfamily E member 1 (SMARCE1), could respond to mechanical stimuli. Overexpression and knockdown experiments indicated the BAF57/SMARCE1 is probably a critical factor regulating the alternative splicing of cyclin D1. Co-IP showed an interaction between BAF57/SMARCE1 and SRSF1, implying a possible underlying mechanism of the regulator role of BAF57/SMARCE1 in the splicing process of cyclin D1. Conclusions: The splicing factor SRSF1 and BAF57/SMARCE1 are possibly responsible for the mechanical stress-induced alternative splicing of cyclin D1.

The current gold standard technique for treatment of anterior cruciate ligament (ACL) injury is reconstruction with autograft. These treatments have a relatively high failure and re-tear rate. To overcome this, tissue engineering and additive manufacturing are being used to explore the potential of 3D scaffolds as autograft substitutes. However, mechanically optimal polymers for this have yet to be identified. Here, we use 3D printing technology and various materials with the aim of fabricating constructs better matching the mechanical properties of the native ACL. A fused deposition modeling (FDM) 3D printer was used to microfabricate dog bone-shaped specimens from six different polymers—PLA, PETG, Lay FOMM 60, NinjaFlex, NinjaFlex-SemiFlex, and FlexiFil—at three different raster angles. The tensile mechanical properties of these polymers were determined from stress–strain curves. Our results indicate that no single material came close enough to successfully match reported mechanical properties of the native ACL. However, PLA and PETG had similar ultimate tensile strengths. Lay FOMM 60 displayed a percentage strain at failure similar to reported values for native ACL. Furthermore, raster angle had a significant impact on some mechanical properties for all of the materials except for FlexiFil. We therefore conclude that while none of these materials alone is optimal for mimicking ACL mechanical properties, there may be potential for creating a 3D-printed composite constructs to match ACL mechanical properties. Further investigations involving co-printing of stiff and elastomeric materials must be explored.

As events triggering early osteoarthritis onset can be related to mechanical stress and proinflammatory signaling, we investigated the effect of different mechanical strain protocols on the expression of proinflammatory genes, as well as extracellular matrix remodelling in human synovial fibroblasts. Three distinct models of tensile stretching were applied: static isotropic tensile strain at 0 Hz, 16% tension for 48 h; short-term high-frequency cyclic tension at 1 Hz, 10% tension for 4 h; and dynamic tensile stretching for 48 h, consisting of two blocks of moderate stretching at 0.2 Hz, 2%, advanced stretching at 0.5 Hz, 15%, or a combination of both. General signs of inflammation were present after static isotropic tension, whereas short-term high-frequency cyclic tension showed increased levels of IL-6 paired with diminished levels of IL-1β. Reduced inflammatory effects of TNF-α, IL-6, and IL-1β were observed when exposed to advanced stretching. Long-term tensile strain induced extracellular matrix remodelling at the gene and protein levels. While hyaluronan acid synthesis was increased with static tensile strain, dynamic tensile stretching had a reducing effect. Our study revealed that proinflammatory markers were activated by mechanical strain as seen in static isotropic tension and short-term high-frequency tensile strain, whereas long-term exposure induced extracellular matrix remodelling processes.

In patients with osteoarthritis (OA), there is a decrease in both the concentration and molecular size of hyaluronan (HA) in the synovial fluid and cartilage. Cell migration-inducing hyaluronidase 1 (CEMIP), also known as hyaluronan (HA)-binding protein involved in HA depolymerization (HYBID), was recently reported as an HA depolymerization-related molecule expressed in the cartilage of patients with OA. However, the underlying mechanism of CEMIP regulation is not well understood. We found that CEMIP expression was transiently increased by interleukine-1β (IL-1β) stimulation in chondrocytic cells. We also observed that ERK activation and NF-κB nuclear translocation were involved in the induction of CEMIP by IL-1β. In addition, both administration of HA and mechanical strain attenuated the CEMIP induction in IL-1β-stimulated chondrocytes. In conclusion, we clarified the regulatory mechanism of CEMIP in chondrocytes by inflammatory cytokines and suggested the potential involvement in osteoarthritis development.

This study investigates the temperature-drift effect on strain measurement of concrete beams and proposes a method for determination of the mechanical strain of stressed concrete beams. In the study, wireless electrical resistance strain gauges were used to measure the strain of concrete beams. This study first examined how temperature changes affected the strain gauge attached to concrete beams. Subsequently, a concrete beam experiencing changes in temperature and load was monitored for six consecutive days. The test results showed that the apparent strain response of the concrete beam was significantly affected by temperature changes. After adjusting for the temperature effect, the mechanical strain generated by a load could be obtained. However, temperature-induced drift was still observed in the mechanical strain response. Based on the assumption that temperature changes are slow and gradual, and mechanical strain changes are momentary, an adjacent data subtraction method can be used to eliminate the temperature-induced drift present in the mechanical strain data. The subtraction results show that the mechanical strain generated by a load was accurately obtained. The proposed data-processing method could also be used to find the residual strain of the nonelastic response of a beam subjected to substantial short-term forces.

When forest stands are thinned, the retained trees are exposed to increased light and greater mechanical strain from the wind. The consequent greater availability of photosynthate and localised mechanical strain in stems and roots are both known to increase cambial growth in conifers, but their relative importance has not previously been quantified. Light availability and wind movement were manipulated in a 10-year-old stand of Sitka spruce trees on an exposed upland site. Treatments were “Control”—no change in spacing or wind loading; “Thinned”—light availability and wind loading increased by removing neighbouring trees; “Thinned and guyed”—light increased and wind loading reduced by removing neighbouring trees and guying stems with wires. Twelve trees per treatment were maintained and monitored for four years before harvesting and removal of cross-sectional stem samples from four heights for measurement of radial growth response. Root systems were excavated from each treatment for observations of associated root growth responses. The “Thinned” treatment and “Thinned and guyed” treatment showed no significant stem growth response in the first year after treatment, but very large increases in the second and subsequent years. There were much larger growth responses in the “Thinned” treatment than in the “Thinned and guyed” treatment, especially in the lower stem. Similar growth responses were observed in the structural roots, close to the stem base. These increases in stem and root growth in response to wind movement corresponded with a reduction of branch growth. Such changes in allocation have implications for the hydraulic and biomechanical requirements of trees, and should be incorporated into tree growth and stability models.

The essential role of Hippo signaling pathway in cancer development has been elucidated by recent studies. In the gastrointestinal tissues, deregulation of the Hippo pathway is one of the most important driving events for tumorigenesis. It is widely known that Yes-associated protein 1 (YAP1) and WW domain that contain transcription regulator 1 (TAZ), two transcriptional co-activators with a PDZ-binding motif, function as critical effectors negatively regulated by the Hippo pathway. Previous studies indicate the involvement of YAP1/TAZ in mechanotransduction by crosstalking with the extracellular matrix (ECM) and the F-actin cytoskeleton associated signaling network. In gastric cancer (GC), YAP1/TAZ functions as an oncogene and transcriptionally promotes tumor formation by cooperating with TEAD transcription factors. Apart from the classic role of Hippo-YAP1 cascade, in this review, we summarize the current investigations to highlight the prominent role of YAP1/TAZ as a mechanical sensor and responder under mechanical stress and address its potential prognostic and therapeutic value in GC.