Search

Silver products with high relief have become popular in the silver decoration industry. However, it is difficult to obtain these products through conventional processing at ambient temperature. The aim of this work is to solve this problem by increasing the deformation temperature. Detailed studies were conducted on the evolution of microstructure characteristics in bulk high-purity silver by electron backscatter diffraction (EBSD) to achieve high-relief applications at elevated temperatures. The high temperature sample is mainly composed of recrystallized and substructured grains, exhibiting a more stable state than the ambient temperature sample. More than 70% annealing twins are observed in the hot-working sample. They are characterized by the amount of Σ3n-type triple grain boundary junctions within large grain clusters formed by multiple twinning. These particular boundaries improve the intergranular corrosion resistance and degradation, which is significantly essential for high-purity silver jewelry exposed to sweat and air. The closed multi-coining processes at different temperatures were conducted subsequently. The performance of workpieces demonstrates that increasing the deformation temperature is a viable alternative for producing durable high-relief silver products.

The dynamic recrystallization (DRX) behavior of 47Zr-45Ti-5Al-3V alloy was studied by using the experiment and numerical simulation method based on DEFORM-3D software and cellular automata (CA) over a range of deformation temperatures (850 to 1050 °C) and strain rates (10−3 to 100 s−1). The results reveal that the DRX behavior of 47Zr-45Ti-5Al-3V alloy strongly depends on hot-working parameters. With rising deformation temperature (T) and decreasing strain rate (ε˙), the grain size (dDRX) and volume fraction (XDRX) of DRX dramatically boost. The kinetics models of the dDRX and XDRX of DRX grains were established. According to the developed kinetics models for DRX of 47Zr-45Ti-5Al-3V alloy, the distributions of the dDRX and XDRX for DRX grains were predicted by DEFORM-3D. DRX microstructure evolution is simulated by CA. The correlation of the kinetics model is verified by comparing the dDRX and XDRX between the experimental and finite element simulation (FEM) results. The nucleation and growth of dynamic recrystallization grains in 47Zr-45Ti-5Al-3V alloy during hot-working can be simulated accurately by CA simulation, comparing with FEM.