Search

This paper describes the design of a control unit for efficient battery charge management in battery electric vehicles (BEVs). The system design aims at controlling the performance of the charging process of dual lithium-ion battery blocks in electric vehicles, with a main battery that powers the vehicle and an auxiliary one for servicing the ancillary equipment. In this paper, we design and analyze the protocol of a control unit that operates and regulates the battery charge in electric vehicles to obtain optimum performance. The so-designed system enhances the battery charge process and protects the main battery from capacity reduction, thus enlarging the driving range of the electric vehicle. We design a specific protocol for an electric circuit that reproduces the structure of the battery charge system of an electric vehicle. The control system improves the efficiency of the auxiliary battery charge by 4.5%. The theoretical simulation matches experimental values in a simulation test by 98.4%.

In this work, a focused ultrasonic radiator is proposed for cooling the electrical heating elements in the focal region, and its working characteristics are investigated. The analyses of the FEM computational and flow field visualization test results indicate that focused ultrasound can generate forced convective heat transfer by the acoustic streaming in the focal region, which can cool the heating elements effectively. Experiments show that when the input voltage is 30Vp-p and the ambient temperature is 25 °C, the focused ultrasonic radiator can cause the surface temperature of the heating element (high-temperature alumina ceramic heating plate with a diameter of 5 mm) in the focal region to drop from 100 °C to about 55 °C. When the diameter of the electrical heating element is changed from 5 mm to 30 mm, the cooling effect is similar in the focal region. Compared with a fan, the focused ultrasound radiator has a shorter cooling time and a more concentrated cooling area. The focused ultrasonic radiator proposed in this work is suitable for some special environments.

Hybrid films for applications in organic electronics from NiFe2O4 nanoparticles (NPs) in poly(3,4 ethylene dioxythiophene), poly(4-styrenesulfonate) (PEDOT:PSS), and poly(methyl methacrylate) (PMMA) were fabricated by the spin-coating technique. The films were characterized by infrared spectroscopy, atomic force microscopy, scanning electron microscopy, and energy-dispersive spectroscopy to subsequently determine their optical parameters. The electronic transport of the hybrid films was determined in bulk heterojunction devices. The presence of NiFe2O4 NPs reinforces mechanical properties and increases transmittance in the hybrid films; the PEDOT:PSS-NiFe2O4 NPs film is the one that has a maximum stress of 28 MPa and a Knoop hardness of 0.103, while the PMMA-NiFe2O4 NPs film has the highest transmittance of (87%). The Tauc band gap is in the range of 3.78–3.9 eV, and the Urbach energy is in the range of 0.24–0.33 eV. Regarding electrical behavior, the main effect is exerted by the matrix, although the current carried is of the same order of magnitude for the two devices: glass/ITO/polymer-NiFe2O4 NPs/Ag. NiFe2O4 NPs enhance the mechanical, optical, and electrical behavior of the hybrid films and can be used as semi-transparent anodes and as active layers.

The demand for high-performance and compact electronic devices has been increasing day by day. Due to their compactness, excessive heat is generated, causing a decrease in efficiency and life. Thermal management of electronic components is crucial for maintaining excessive heat within the limit. This experimental research focuses on the combined effect of nano-enhanced phase-change material (NePCM) with different configurations of heat sinks for cooling electronic devices. Multi-walled carbon nanotubes (MWCNTs) are used as nanoparticles with concentrations of 3 wt% and 6 wt%, RT-42 as the phase-change material (PCM), and aluminum as the pin fin heat sink material. Different configurations of the heat sink, such as circular, square, and triangular pin fins, are used against the fixed volume fraction of the fins. It is found that the square configuration has the highest heat transfer with and without PCM. A maximum base temperature reduction of 24.01% was observed in square pin fins with RT-42 as PCM. At 6 wt% of NePCM, the maximum base temperature lessened by 25.83% in the case of a circular pin fin. It is concluded from the results that a circular pin fin with NePCM is effective for base temperature reduction, and all fin configurations with NePCM collectively reduce the heat sink base temperature.

Blood Pressure (BP) is one of the most used measured clinical parameters in health promotion and intervention. BP measures can vary due to different parameters, so we aim to study the intrasession test–retest reliability for an oscillometric method using a digital tensiometer in the Peruvian population aged over 15 with and without a diagnosis of hypertension (HT). Data were taken from the Demographic and Family Health Survey conducted in Peru in 2019. Technicians had to follow a standardized protocol on the conditions to carry out a valid and reliable measurement. Relative reliability was excellent in most cases (intraclass correlation coefficient > 0.9); absolute reliability was excellent (standard error of measurement < 5%) and smallest real difference < 10% in most cases. The Bland–Altman plot showed a systematic error of 2.36 for systolic BP in men and 2.16 in women, and 0.823 for diastolic BP in men and 0.71 for diastolic BP in women. Results suggest that the oscillometric method with a digital blood pressure monitor was reliable in absolute and relative terms in this population, so it could be used as a reliable control test to measure changes after an intervention.

The current review aimed to collect and critically analyze the scientific peer-reviewed literature that is available about the use of digital applications for evaluation of visual parameters in electronic devices (tablets and smartphones), confirming if there are studies calibrating and validating each of these applications. Three bibliographic search engines (using the search equation described in the paper) and the Mendeley reference manager search engine were used to complete the analysis. Only articles written in English and that are evaluating the use of tests in healthy patients to measure or characterize any visual function aspects using tablets or smartphones were included. Articles using electronic visual tests to assess the results of surgical procedures or are conducted in pathological conditions were excluded. A total of 19 articles meeting these inclusion and exclusion criteria were finally analyzed. One critical point of all these studies is that there was no mention of the characterization (spatial and/or colorimetrical) of screens and the stimuli used in most of them. Only two studies described some level of calibration of the digital device before the beginning of the study. Most revised articles described non-controlled comparatives studies (73.7%), reporting some level of scientific evidence on the validation of tools, although more consistent studies are needed.

The easy access to electronic devices for users has resulted in the development of a vast range of programs and applications for visual evaluation and diagnosis that can be downloaded to any device. Some of them are based on tasks and stimuli that depend on luminance. The aim of the present study was to evaluate differences in luminance reproduction between electronic devices and their implications for contrast reproduction. A total of 20 Galaxy Tab A devices with 8-bit graphics processing units were evaluated. Characterization of every screen was performed obtaining the response curve for the achromatic stimulus. Mean, maximum and minimum luminance, standard deviation and coefficient of variation were obtained to assess differences between devices. Variation of luminance with increasing digital level was observed in all devices following a gamma distribution. Comparison between devices for mean results showed that some of them differed by as much as 45 cd/m2. The coefficient of variation varied from ~5 to 9%. Mean percentage of differences in luminance between devices reached 30%. In conclusion, differences in luminance reproduction between devices were present, even considering devices from the same manufacturing batch. It cannot be assumed that the characterization of one device can be extrapolated to other devices. Every device used for research purposes should be individually characterized to ensure the correct reproduction. For clinical purposes, limitations should be considered by visual specialists.

With the development of microelectronic devices having miniaturized and integrated electronic components, an efficient thermal management system with lightweight materials, which have outstanding thermal conductivity and processability, is becoming increasingly important. Recently, the use of polymer-based thermal management systems has attracted much interest due to the intrinsic excellent properties of the polymer, such as the high flexibility, low cost, electrical insulation, and excellent processability. However, most polymers possess low thermal conductivity, which limits the thermal management applications of them. To address the low thermal conduction of the polymer materials, many kinds of thermally conductive fillers have been studied, and the carbon-based polymer composite is regarded as one of the most promising materials for the thermal management of the electric and electronic devices. In addition, the next generation electronic devices require composite materials with various additional functions such as flexibility, low density, electrical insulation, and oriented heat conduction, as well as ultrahigh thermal conductivity. In this review, we introduce the latest papers on thermally conductive polymer composites based on carbon fillers with sophisticated structures to meet the above requirements. The topic of this review paper consists of the following four contents. First, we introduce the design of a continuous three-dimensional network structure of carbon fillers to reduce the thermal resistance between the filler–matrix interface and individual filler particles. Second, we discuss various methods of suppressing the electrical conductivity of carbon fillers in order to manufacture the polymer composites that meet both the electrical insulation and thermal conductivity. Third, we describe a strategy for the vertical alignment of carbon fillers to improve the through-plane thermal conductivity of the polymer composite. Finally, we briefly mention the durability of the thermal conductivity performance of the carbon-based composites. This review presents key technologies for a thermal management system of next-generation electronic devices.

The B←N is isoelectronic to the C−C, with the former having stronger dipole moment and higher electron affinity. Replacing the C−C bonds in conjugated polymers with B←N bonds is an effective pathway toward novel polymers with strong electron affinity and adjustable optoelectronic properties. In this work, we synthesize a conjugated copolymer, namely, BNIDT-DPP, based on a B←N embedded unit, BNIDT, and a typical electron-deficient unit, diketopyrrolopyrrole (DPP). For comparison, the C−C counterpart, i.e., IDT-DPP, is also synthesized. In contrast to IDT-DPP, the B←N embedded polymer BNIDT-DPP shows an extended absorption edge (836 versus 978 nm), narrowed optical bandgap (1.48 versus 1.27 eV), and higher electron affinity (3.54 versus 3.74 eV). The Gaussian simulations reveal that the B←N embedded polymer BNIDT-DPP is more electron-deficient in contrast to IDT-DPP, supporting the decreased bandgap and energy levels of BNIDT-DPP. Organic thin-film transistor (OTFT) tests indicate a well-defined p-type characteristic for both IDT-DPP and BNIDT-DPP. The hole mobilities of IDT-DPP and BNIDT-DPP tested by OTFTs are 0.059 and 0.035 cm2/V·s, respectively. The preliminary fabrication of all-polymer solar cells based on BNIDT-DPP and PBDB-T affords a PCE of 0.12%. This work develops a novel B←N embedded polymer with strong electron affinity and extended absorption, which is potentially useful for electronic device application.

Thermal Fatigue of flip chip component solder joints is widely existing in thermal energy systems, which imposes a great challenge to operational safety. In order to investigate the influential factors, this paper develops a model to analyze thermal fatigue, based on the Darveaux energy method. Under cyclic thermal loading, a theoretical heat transfer and thermal stress model is developed for the flip chip components and the thermal fatigue lives of flip chip component solder joints are analyzed. The model based simulation results show the effects of environmental and power parameters on thermal fatigue life. It is indicated that under cyclic thermal loading, the solder joint with the shortest life in a package of flip chip components is located at the outer corner point of the array. Increment in either power density or ambient temperature or the decrease in either power conversion time or ambient pressure will result in short thermal fatigue lives of the key solder joints in the flip chip components. In addition, thermal fatigue life is more sensitive to power density and ambient temperature than to power conversion time and ambient air pressure.

Organic semiconductor materials have been the center of attention because they are scalable, low-cost for device fabrication, and they have good optical properties and mechanical flexibility, which encourages their research. Organic field-effect transistors (OFETs) have potential applications, specifically in flexible and low-cost electronics such as portable and wearable technologies. In this work we report the fabrication of an InClPc base flexible bottom-gate/top-contact OFET sandwich, configured by the high-evaporation vacuum technique. The gate substrate consisted of a bilayer poly(ethylene terephthalate) (PET) and indium−tin oxide (ITO) with nylon 11/Al2O3. The device was characterized by different techniques to determine chemical stability, absorbance, transmittance, bandgap, optical properties, and electrical characteristics in order to determine its structure and operational properties. IR spectroscopy verified that the thin films that integrated the device did not suffer degradation during the deposition process, and there were no impurities that affected the charge mobility in the OFET. Also, the InClPc semiconductor IR fingerprint was present on the deposited device. Surface analysis showed evidence of a nonhomogeneous film and also a cluster deposition process of the InClPc. Using the Tauc model, the device calculated indirect bandgap transitions of approximately 1.67 eV. The device’s field effect mobility had a value of 36.2 cm2 V−1 s−1, which was superior to mobility values obtained for commonly manufactured OFETs and increased its potential to be used in flexible organic electronics. Also, a subthreshold swing of 80.64 mV/dec was achieved and was adequate for this kind of organic-based semiconductor device. Therefore, semiconductor functionality is maintained at different gate voltages and is transferred accurately to the film, which makes these flexible OFETs a good candidate for electronic applications.

Hybrid films for applications in organic electronics from NiFe 2 O 4 nanoparticles (NPs) in poly(3,4 ethylene dioxythiophene), poly(4-styrenesulfonate) (PEDOT:PSS), and poly(methyl methacrylate) (PMMA) were fabricated by the spin-coating technique. The films were characterized by infrared spectroscopy, atomic force microscopy, scanning electron microscopy, and energy-dispersive spectroscopy to subsequently determine their optical parameters. The electronic transport of the hybrid films was determined in bulk heterojunction devices. The presence of NiFe 2 O 4 NPs reinforces mechanical properties and increases transmittance in the hybrid films; the PEDOT:PSS-NiFe 2 O 4 NPs film is the one that has a maximum stress of 28 MPa and a Knoop hardness of 0.103, while the PMMA-NiFe 2 O 4 NPs film has the highest transmittance of (87%). The Tauc band gap is in the range of 3.78-3.9 eV, and the Urbach energy is in the range of 0.24-0.33 eV. Regarding electrical behavior, the main effect is exerted by the matrix, although the current carried is of the same order of magnitude for the two devices: glass/ITO/polymer-NiFe 2 O 4 NPs/Ag. NiFe 2 O 4 NPs enhance the mechanical, optical, and electrical behavior of the hybrid films and can be used as semi-transparent anodes and as active layers.

Blood Pressure (BP) is one of the most used measured clinical parameters in health promotion and intervention. BP measures can vary due to different parameters, so we aim to study the intrasession test-retest reliability for an oscillometric method using a digital tensiometer in the Peruvian population aged over 15 with and without a diagnosis of hypertension (HT). Data were taken from the Demographic and Family Health Survey conducted in Peru in 2019. Technicians had to follow a standardized protocol on the conditions to carry out a valid and reliable measurement. Relative reliability was excellent in most cases (intraclass correlation coefficient > 0.9); absolute reliability was excellent (standard error of measurement < 5%) and smallest real difference < 10% in most cases. The Bland-Altman plot showed a systematic error of 2.36 for systolic BP in men and 2.16 in women, and 0.823 for diastolic BP in men and 0.71 for diastolic BP in women. Results suggest that the oscillometric method with a digital blood pressure monitor was reliable in absolute and relative terms in this population, so it could be used as a reliable control test to measure changes after an intervention.

The current review aimed to collect and critically analyze the scientific peer-reviewed literature that is available about the use of digital applications for evaluation of visual parameters in electronic devices (tablets and smartphones), confirming if there are studies calibrating and validating each of these applications. Three bibliographic search engines (using the search equation described in the paper) and the Mendeley reference manager search engine were used to complete the analysis. Only articles written in English and that are evaluating the use of tests in healthy patients to measure or characterize any visual function aspects using tablets or smartphones were included. Articles using electronic visual tests to assess the results of surgical procedures or are conducted in pathological conditions were excluded. A total of 19 articles meeting these inclusion and exclusion criteria were finally analyzed. One critical point of all these studies is that there was no mention of the characterization (spatial and/or colorimetrical) of screens and the stimuli used in most of them. Only two studies described some level of calibration of the digital device before the beginning of the study. Most revised articles described non-controlled comparatives studies (73.7%), reporting some level of scientific evidence on the validation of tools, although more consistent studies are needed.