Search

Sour and sweet cherries were evaluated as functional components in bread-making because of their bioactive microconstituent content. Five forms of enrichment for each fruit, including the hydroalcoholic extract, lyophilized pulverized fruit, lyophilized extract, and their combinations, were used for supplementation. The physicochemical (pH, color, moisture, rheology, and texture) and sensory properties of dough and bread were assessed in different environments (biological and chemical leavening). Sour cherry in pulverized and extract forms showed higher phenolic content than sweet cherry, especially in the pulverized form. The viscoelasticity of the doughs varied based on the proofing environment and the fortification form. Chemically leavened doughs exhibited higher moduli (G′, G″), complex viscosity (η*), and hardness. Biologically leavened doughs had a lower pH, influencing color, and swelling percentage, which is linked to the enrichment form and phenolic content. Extract-fortified doughs displayed increased G′, η*, and hardness compared to the control, whereas yeast-leavened doughs showed reduced swelling ability. Physicochemical changes were more significant in the yeast-leavened systems, which also scored higher on the sensory evaluations. Supplementing bakery products with bioactive fruit components enhances antioxidant status, but the enrichment form and proofing conditions significantly affect the physicochemical and sensory properties of the product.

Common bakery and many other cereal products are characterised by high glycaemic index values. Given the increasing number of people suffering from type 2 diabetes at a very young age, technological approaches to reduce the glycaemic index of cereal products are extremely important. In addition to increasing the dietary fibre content, either by using wholemeal flours or flours with added fibre from other sources, practices leading to an increase in resistant starch content are also of great interest. This review summarises the most important technological processes used to reduce the glycaemic index of bread and other bakery products. The summarization shows that the potential of various technological processes or their physical and physicochemical modifications to reduce the glycaemic index of common bakery products exists. At the same time, however, it has been shown that these processes have not been sufficiently explored, let alone applied in production practice.

In recent years, the bakery industry has been exploring alternative fats to replace traditional solid fats. Shortening, a common baking ingredient, is produced through the hydrogenation of vegetable oils, resulting in high levels of saturated and trans fatty acids, despite its vegetable oil origin. The excessive consumption of these fats has been associated with negative health effects, including dyslipidemia and cardiovascular issues. Oleogels, incorporating hydroxypropyl methylcellulose (HPMC), xanthan gum (XG), and olive oil, were utilized to replace shortening in the production of white pan bread. The substitution of shortening with oleogel in the white pan bread preparation demonstrated potential reductions in saturated fat, trans fat, and the ratio of saturated fat to unsaturated fatty acids. Specifically, with the complete substitution of shortening with oleogel, saturated fatty acids decreased by 52.46% and trans fatty acids by 75.72%, with unsaturated fatty acids increasing by 57.18%. Our findings revealed no significant difference in volume between bread made with shortening and bread with up to 50% shortening substitution. Moreover, when compared to bread made with shortening and 50% oleogel substitution, no adverse effects on the quality characteristics of volume and expansion properties were observed, and the retrogradation rate was delayed. This study suggests that incorporating oleogels, formed with hydrocolloids such as HPMC and XG, to replace shortening in bread, in conjunction with traditional solid fats, provides positive effects on the quality and nutritional aspects of the bread compared to using oleogel alone. Through this study, we demonstrate the use of oleogels as a healthier alternative to shortening, without reducing the bread’s quality, thus offering a practical solution to reduce unhealthy fats in bakery products.

Acorns, the fruit of oak trees of the genus Quercus, have been known to people for generations worldwide. In ancient times, they were an important part of culinary traditions and folk medicine. Their exploitation for food over the years has been significantly diminished, which may arise from the high content of tannins responsible for a bitter taste and anti-nutritional properties. However, more and more studies show acorns’ potential nutritional and health benefits. Furthermore, new reports are emphasizing the health-promoting properties of tannin-decomposition products. This review aims to present the available studies on the phytoconstituents variation in the acorns of different Quercus species and their possible significance for food and medical applications. In this study, the results of lab-scale food processing, as well as in vivo and in vitro experiments, are included. The literature data proved that acorn products (flour, oil, and extracts) are intensively examined due to their dietary, antioxidant, anti-microbial, anti-inflammatory, anti-cancer, and neuroprotective activities provided by their bioactive compounds. The general conclusion is that this raw material can be used more widely in the future as an ingredient in functional foods, supplements, and drugs.

The use of by-products as functional ingredients for bread recipes may open up new horizons in terms of product innovation to increase nutraceutical characteristics and/or shelf-life. In this research, the ability of residual products from important food chains (Citrus and wine) to influence the water binding capacity of dough and bread was investigated in order to create industrial breads of high quality with prolonged shelf-life in the absence of any chemical additives (e.g., ethanol, sorbic acid, and propionic acid). The product under study is the ‘Pan Bauletto bianco con olio EVO’ (white bakery bread with EVO oil), an ‘industrial bread’ type usually treated with ethanol before being marketed, aiming to prolong its short shelf-life. The effect of the addition of different amounts of pectin (Citrus supply chain) and grape pomace (wine supply chain), in combination or not, has shown promising results from both a technological point of view and the increasing shelf-life, allowing to obtain products with high nutraceutical value and interesting properties.

The effect of exposure of soft wheat buns to Ultraviolet-C radiation (UV-C, 253.7 nm) was studied as an alternative to conventional treatments to control fungal spoilage and prolong shelf life. To identify the most suitable operating conditions, the study included preliminary tests on the permeability of films to UV-C irradiation, and on treatment antifungal efficacy on target microorganisms (Penicillium digitatum and Saccharomycopsis fibuligera) in Petri dishes. A 125 µm T9250B film (Cryovac® Sealed Air S.r.l), commercially available for long-life bread treated with ethanol and conditioned in a modified atmosphere, was selected to pack buns before the UV-C treatment. The study was carried out along with the observation of the fungal growth of buns artificially inoculated with suspensions of P. digitatum and S. fibuligera, treated under UV-C at a distance of 25 cm between bread and the 15 W UV-C source, in comparison to untreated buns used as control. Estimation of fungal growth as well as sensory evaluation was made 2, 4, 7, 10 and 14 days after the treatment. UV-C treated buns showed a noticeable reduction of fungal spoilage and kept a tender texture for up to two weeks after packaging. UV-C treatment represents a good opportunity for the bakery industry, reducing costs and ensuring a prolonged shelf life of a commercial product, respecting the health and hedonistic expectations of the customers.

In this study, the production of 4,6-α (4,6-α-GTase) and 4,3-α-glucanotransferase (4,3-α-GTase), expressed previously in Lactococcus lactis, was optimized and these enzymes were used to investigate glycemic index reduction and staling delay in bakery products. HP–SEC analysis showed that the relevant enzymes were able to produce oligosaccharides from potato starch or malto-oligosaccharides. Response Surface Methodology (RSM) was used to optimize enzyme synthesis and the highest enzyme activities of 15.63 ± 1.65 and 19.01 ± 1.75 U/mL were obtained at 1% glucose, pH 6, and 30 °C for 4,6-α-GTase and 4,3-α-GTase enzymes, respectively. SEM analysis showed that both enzymes reduced the size of the starch granules. These enzymes were purified by ultrafiltration and used to produce bread and bun at an enzyme activity of 4 U/g, resulting in a decrease in the specific volume of the bread. It was found that the estimated glycemic index (eGI) of bread formulated with 4,6-α-GTase decreased by 18.01%, and the eGI of bread prepared with 4,3-α-GTase decreased by 13.61%, indicating a potential delay in staling. No significant differences were observed in the sensory properties of the bakery products. This is the first study showing that 4,6-α-GTase and 4,3-α-GTase enzymes have potential in increasing health benefits and improving technological aspects regarding bakery products.

The raspberry (Rubus idaeus L.) is a soft red fruit consumed worldwide due to its bitter-sweet taste and phenolics-associated health benefits. During plant dormancy, raspberry fruits are discarded. However, this work hypothesised that these fruits have the chemical quality to be valorised, which would mitigate their waste if adequately stabilised. This can be achieved by drying. The Pacific Deluxe and Versailles varieties were dried by freeze- and convective-drying (30 °C and 40 °C). The freeze-dried fruits preserved their colour, drupelets structure, and phenolic content. Convective-drying promoted a significant fruit darkening, which was more evident at 30 °C due to the longer drying process, and a loss of drupelets structure. Both temperatures promoted a similar decrease in phenolic content, as determined by HPLC, although the ABTS●+ antioxidant activity at 40 °C was lower (IC50 = 9 compared to 13 μg AAE/mg dry weight). To incorporate dried raspberries into muffin formulations, while keeping their red colour, it was necessary to change the raising agent from sodium bicarbonate to baker’s yeast. Sensory analysis by a non-trained panel revealed good acceptance, showing that fresh or dried raspberry fruits from dormancy had suitable characteristics for use as food ingredients.

The development of gluten-free bakery products, the quality of which is comparable to the quality of regular wheat-based products, remains a technological challenge. In this study, flaxseed oil cake (FOC), a by-product of flaxseed oil extraction and a source of nutritional and functional compounds, was used as an ingredient in the experimental bread formulation as partial replacement of starches (5%, 15%, and 30%). The gluten-free breads (GFBs) were evaluated for technological parameters, nutritional value, and sensory quality. Compared with the control, all FOC-enhanced GFBs were significantly (p < 0.05) richer in proteins, fat, and dietary fibre, with an increase that was proportional to the concentration of FOC in the formulation. At low-to-moderate levels (5% and 15%), FOC improved the specific volume, texture characteristics (reduced crumb hardness, gumminess, and chewiness), and appearance of GFBs, which allowed us to ameliorate its sensory features, but at 30% of FOC, the quality of the crumb texture decreased significantly (p < 0.005). Among the experimental GFBs, FOC15% exhibited improved technological characteristics and was rated by the sensory panel as the best in terms of overall quality. The results of the conducted research highlighted the benefits of incorporating FOC into GFB as a promising approach to developing a palatable, high-quality bakery product that may be a healthier option for individuals on a gluten-free diet, offering nutritional benefits. Nevertheless, it should be emphasised that the amount of FOC in GFB requires careful regulation.

Peanut sprouts are known to increase their resveratrol content during germination, leading to cultivation in smart farms. Recently, peanut sprout oil extraction and sales have gained traction; however, processed foods utilizing peanut sprout oil have yet to be developed. In this study, water-in-oil (W/O) emulsion gels were structured with water, peanut sprout oil (PSO), sorbitan monostearate (SMS), and candelilla wax (CW) in different ratios, and their potential as shortening substitutes in muffins was evaluated on physicochemical and sensory properties. PSO comprised 67% unsaturated fatty acids and had higher phospholipid (17.97%) and resveratrol (15.95 µg/L) contents and antioxidant activity (71.52%) compared to peanut oil. The PSO emulsion gels were physically structured without changing their chemical compositions. The SMS and CW ratios were found to have a significant influence on the textural properties, solid fat content, rheology, and crystallization of the emulsion gels. The viscoelastic properties of the emulsion gels showed a higher storage modulus than loss modulus and increased with increasing gelator content. Muffins prepared with emulsion gels were characterized by a harder texture and larger pore size, while in the case of muffins mixed with a ratio of 25% SMS and 75% CW, there was no significant difference in overall preference of sensory evaluation compared to shortening muffins. Thus, these findings reveal the potential utility of PSO as a fat substitute and indicate that W/O emulsion gels are suitable for producing muffins without a loss of quality.

Sour and sweet cherries were evaluated as functional components in bread-making because of their bioactive microconstituent content. Five forms of enrichment for each fruit, including the hydroalcoholic extract, lyophilized pulverized fruit, lyophilized extract, and their combinations, were used for supplementation. The physicochemical (pH, color, moisture, rheology, and texture) and sensory properties of dough and bread were assessed in different environments (biological and chemical leavening). Sour cherry in pulverized and extract forms showed higher phenolic content than sweet cherry, especially in the pulverized form. The viscoelasticity of the doughs varied based on the proofing environment and the fortification form. Chemically leavened doughs exhibited higher moduli (G', G″), complex viscosity (η*), and hardness. Biologically leavened doughs had a lower pH, influencing color, and swelling percentage, which is linked to the enrichment form and phenolic content. Extract-fortified doughs displayed increased G', η*, and hardness compared to the control, whereas yeast-leavened doughs showed reduced swelling ability. Physicochemical changes were more significant in the yeast-leavened systems, which also scored higher on the sensory evaluations. Supplementing bakery products with bioactive fruit components enhances antioxidant status, but the enrichment form and proofing conditions significantly affect the physicochemical and sensory properties of the product.

In view of the frequent occurrences of mycotoxins in cereals, this study assessed the presence of trichothecenes in 121 samples from Romanian markets. These samples were divided into five groups based on product type: (1) bread and bakery products containing white flour, (2) half-brown bread with whole wheat flour, (3) brown bread containing rye flour, (4) pasta, and (5) raw wheat. Gas Chromatography-Mass Spectrometry was used to detect 13 different mycotoxins, which included the Type A compounds HT-2 toxin and T-2 toxin, as well as the Type B compounds deoxynivalenol and nivalenol. Results indicated trichothecene contamination in 90.08% of our samples, with deoxynivalenol predominating by at least 78% in each examined group. Co-occurrence of three or four trichothecenes were found in 23.85% of our samples. Our study underscores the necessity of consistent monitoring of staple foods to prevent the intake of harmful trichothecenes by consumers.

Grapes are the third most produced fruit in the world, owing to their taste and use as raw materials for winemaking. Due to this fact, large volumes of waste biomass are generated as a result of grape juice and wine production, mainly grape seeds (GS) and peels. In recent decades, scientific research has highlighted the high content of polyphenols in GS, especially condensed tannins, and resveratrol. These compounds have been associated to various potential benefits to human health, such as antioxidant, hypoglycemic, hypolipidemic or anti-inflammatory bioactivities, among others. GS polyphenols may be incorporated into functional foods. Flour in wheat-based bakery products especially appears to be an attractive option. Two strategies may be followed. On one hand, the incorporation of GS flour increases the fiber, mineral, and protein content of bakery products, as well as their hardness and phenolic content. However, it seems that consumers may accept up to 10% of GS flour, since higher doses strongly diminish the organoleptic properties of the product. The other alternative involves the incorporation of polyphenol-rich GS extracts into bakery formulations, which would transfer their beneficial bioactivities to the final product. Nonetheless, this method is more laborious since it requires a prior chemical extraction of GS, and the control and addition of a safe, food-grade extract into the flour. Both strategies have been reported to increase the phenolic content and antioxidant capacity of bakery products. The direct incorporation of GS flour is affordable for industries, while the incorporation of polyphenol-rich extracts leads to the development of functional products with additional beneficial properties. This work discusses the benefits and potential hurdles of functional bakery products with incorporated GS flour and extracts, based on up-to-date evidence.

Canola, Brassica napus L., is a major oilseed crop that has various uses in the food, feed, and industrial sectors. It is one of the most widely produced and consumed oilseeds in the world because of its high oil content and favorable fatty acid composition. Canola grains and their derived products, such as canola oil, meal, flour, and bakery products, have a high potential for food applications as they offer various nutritional and functional benefits. However, they are affected by various factors during the production cycle, post-harvest processing, and storage. These factors may compromise their quality and quantity by affecting their chemical composition, physical properties, functional characteristics, and sensory attributes. Therefore, it is important to optimize the production and processing methods of canola grains and their derived products to ensure their safety, stability, and suitability for different food applications. This literature review provides a comprehensive overview of how these factors affect the quality of canola grains and their derived products. The review also suggests future research needs and challenges for enhancing canola quality and its utilization in food.

In this study, gluten-free doughs with rice flour, substituted by 15% fractions of different carob seed flours, were prepared by varying their water content. The coarse carob fraction A (median particle size of flour, D50: 258.55 μm) was rich in fibers, fraction B (D50: 174.73 μm) was rich in protein, C (D50: 126.37 μm) was rich in germ protein, and fraction D (D50: 80.36 μm) was a mix, reconstituted from the other fractions and pulverized using a jet mill. Τhe experimental data of the dough’s volume over time were fitted to the Gompertz model for each carob fraction and water content. The calculated parameters of the model were the maximum relative volume expansion ratio (a), the maximum specific volume growth rate (μ), and the time lag of the leavening process (tlag). Gompertz’s equation adequately described the individual experimental curves. In the next step, a composite model was applied for each carob fraction where the parameters a and tlag were expressed as quadratic functions of water content levels (W), while μ was linearly dependent on W. Each carob fraction presented an optimum water content level for which dough height was maximized and time lag was minimized. Optimized dough volume could be predicted by the composite model; it was shifted to lower values as finer carob flour was used. In respect to baked products, softer breads were produced using finer carob flour and porosity values were higher at optimum water content levels. The investigated fermentation kinetics’ models provide significant information about the role of water and carob flour on gluten-free dough development and bread volume expansion.

The aim of the research is to investigate whether purchasing decisions about bakery products (bread, snacks and biscuits) are influenced by concerns about health, climate change, biodiversity loss and food waste. The exploratory survey was carried out in two successive moments before and during the health emergency from COVID-19. Before the health emergency, face-to-face interviews were carried out using a structured questionnaire. Data were analyzed by factor analysis, reliability tests and descriptive analysis. Structural equation modeling (SEM) was employed to test the research hypotheses. The results of the modeling analysis of the structural equations highlighted that health and the environment represent an important background in the consumer experience of the respondents and influence the attitude and intention to purchase safe and environmentally friendly bakery products. Furthermore, the results suggest that informed, modern and aware consumers have direct and indirect effects on the intentions to adopt sustainable attitudes. On the contrary, the perception relating to the shops where consumers buy bakery products does not always show a significant influence on the propensity for sustainability. During the health emergency, the interviews were conducted online. Families confined to their homes, buying less in stores, have prepared many baked goods manually at home. The descriptive analysis of this group of consumers shows a growing attention to points of sale and the tendency to use online shopping. Furthermore, the changes in the type of purchases and the importance attributed to the need to reduce food waste emerge.

This paper is a report on the nutritional composition (dry matter, total protein, fat, crude fibre, ash, β-glucan content, and selected mineral compounds), antioxidant (antioxidant activity with the DPPH method and total anthocyanin content), physical properties, and sensory profiles of prepared bread enriched with black oat flours (variety Norik and Hucul) in amounts of 3, 6, and 9%. In the enriched breads (especially with 9% addition), there was a significantly higher (p < 0.05) content of protein (~13.00%), fat (~1.35%), crude fibre (~0.55%), ash (~1.25%), and β-glucan (~0.17%) with comparison to the control bread (12.01%; 0.87%; 0.47%; 0.92%; 0.07%, respectively). Among mineral compounds, the amount of manganese (~73.00 mg/100 g), iron (~45.00 mg/100 g), and calcium (~40.00 mg/100 g) were the highest in enriched breads with 9% of oat flours. In the case of antioxidant potential and total anthocyanin content, the same tendency was observed, and the values obtained were the highest in the case of 9% addition, especially with the Hucul variety (1.98 mg TEAC/g; 21.01 µg/g). The sensory properties of the prepared enriched breads were overall evaluated as good with the best score in smell, taste, colour, and properties of bread crumb (soft and flexible) compared to the control sample. Consumption of enriched breads with black oat can also increase the assortment of bakery products in markets, which is now popular for consumers.

In this study, a wide pool of lactic acid bacteria strains deposited in two recognized culture collections was tested against ropy bread spoilage bacteria, specifically belonging to Bacillus spp., Paenibacillus spp., and Lysinibacillus spp. High-throughput and ex vivo screening assays were performed to select the best candidates. They were further investigated to detect the production of active antimicrobial metabolites and bacteriocins. Moreover, technological and safety features were assessed to value their suitability as biocontrol agents for the production of clean-label bakery products. The most prominent inhibitory activities were shown by four strains of Lactiplantibacillus plantarum (NFICC19, NFICC 72, NFICC163, and NFICC 293), two strains of Pediococcus pentosaceus (NFICC10 and NFICC341), and Leuconostoc citreum NFICC28. Moreover, the whole genome sequencing of the selected LAB strains and the in silico analysis showed that some of the strains contain operons for bacteriocins; however, no significant evidence was observed phenotypically.

Due to the growing global incidence of allergy to nuts and peanuts, the need for better protection of consumers sensitive to those products is constantly increasing. The best strategy to defend them against adverse immunological reactions still remains the total removal of those products from their diet. However, nuts and peanuts traces can also be hidden in other food products, especially processed ones, such as bakery products, because of cross-contamination occurring during production. Precautionary labelling is often adopted by producers to warn allergic consumers, usually without any evaluation of the actual risk, which would require a careful quantification of nuts/peanuts traces. In this paper, the development of a multi-target method based on liquid chromatography-tandem high resolution mass spectrometry (LC-MS, MS/MS), able to detect traces of five nuts species (almonds, hazelnuts, walnuts, cashews and pistachios) and of peanuts in an in-house incurred bakery product (cookie) through a single analysis is described. Specifically, allergenic proteins of the six ingredients were used as the analytical targets, and the LC-MS responses of selected peptides resulting from their tryptic digestion, after extraction from the bakery product matrix, were exploited for quantification, following a bottom-up approach typical of proteomics. As a result, nuts/peanuts could be detected/quantified down to mg·kg−1 levels in the model cookie, thus opening interesting perspectives for the quantification of hidden nuts/peanuts in bakery products and, consequently, for a more rational use of precautionary labelling.

In recent years, the bakery industry has been exploring alternative fats to replace traditional solid fats. Shortening, a common baking ingredient, is produced through the hydrogenation of vegetable oils, resulting in high levels of saturated and trans fatty acids, despite its vegetable oil origin. The excessive consumption of these fats has been associated with negative health effects, including dyslipidemia and cardiovascular issues. Oleogels, incorporating hydroxypropyl methylcellulose (HPMC), xanthan gum (XG), and olive oil, were utilized to replace shortening in the production of white pan bread. The substitution of shortening with oleogel in the white pan bread preparation demonstrated potential reductions in saturated fat, trans fat, and the ratio of saturated fat to unsaturated fatty acids. Specifically, with the complete substitution of shortening with oleogel, saturated fatty acids decreased by 52.46% and trans fatty acids by 75.72%, with unsaturated fatty acids increasing by 57.18%. Our findings revealed no significant difference in volume between bread made with shortening and bread with up to 50% shortening substitution. Moreover, when compared to bread made with shortening and 50% oleogel substitution, no adverse effects on the quality characteristics of volume and expansion properties were observed, and the retrogradation rate was delayed. This study suggests that incorporating oleogels, formed with hydrocolloids such as HPMC and XG, to replace shortening in bread, in conjunction with traditional solid fats, provides positive effects on the quality and nutritional aspects of the bread compared to using oleogel alone. Through this study, we demonstrate the use of oleogels as a healthier alternative to shortening, without reducing the bread's quality, thus offering a practical solution to reduce unhealthy fats in bakery products.

Because of the nutritional need of patients with celiac disease, producing quality gluten-free diet food is important. This study evaluated the use of persimmon flour on the properties of muffins. Persimmon flour obtained from the astringent variety ‘Rojo Brillante’, which is often discarded due to its characteristic astringency, was added to muffins replacing corn flour (10%, 20%, and 30%). Despite the height differences between the control muffin and the muffins with persimmon flour, similar mechanical parameters were obtained. As the percentage of persimmon flour increased, the muffin color was darker, turning toward a more reddish hue, mainly because of the intensification of nonenzymatic browning reactions. The sensory results showed high scores for taste attributes, the texture attributes were similar to the control, and astringency was hardly detected when persimmon flour was used. The content of tannins and carotenoids and their antioxidant activity increased significantly with an increasing amount of persimmon flour. After in vitro digestion, high recovery index values of soluble tannins and carotenoids were obtained in muffins with added persimmon flour. This study shows that the use of persimmon flour as a functional ingredient offers an opportunity to develop quality gluten-free muffins that reduce agricultural losses. Astringent varieties can be used, without applying a de-astringency treatment, as the astringency is removed during muffin baking due to tannins’ insolubilization.

Background: Non-conventional yeasts (NCY) (i.e., non-Saccharomyces) may be used as alternative starters to promote biodiversity and quality of fermented foods and beverages (e.g., wine, beer, bakery products). Methods: A total of 32 wine-associated yeasts (Campania region, Italy) were genetically identified and screened for decarboxylase activity and leavening ability. The best selected strains were used to study the leavening kinetics in model doughs (MDs). A commercial strain of Saccharomyces cerevisiae was used as the control. The volatile organic profiles of the inoculated MDs were analyzed by solid phase microextraction/gas chromatography-mass spectrometry (SPME/GC-MS). Results: Most of strains belonged to the NCY species Hanseniaspora uvarum, Metschnikowia pulcherrima, Pichia kudriavzevii, Torulaspora delbruekii, and Zygotorulaspora florentina, while a few strains were S. cerevisiae. Most strains of H. uvarum lacked decarboxylase activity and showed a high leaving activity after 24 h of incubation that was comparable to the S. cerevisiae strains. The selected H. uvarum strains generated a different flavor profile of the doughs compared to the S. cerevisiae strains. In particular, NCY reduced the fraction of aldehydes that were potentially involved in oxidative phenomena. Conclusions: The use of NCY could be advantageous in the bakery industry, as they can provide greater diversity than S. cerevisiae-based products, and may be useful in reducing and avoiding yeast intolerance.

Polymeric materials including plastic and paper are commonly used as packaging for bakery products. The incorporation of active substances produces functional polymers that can effectively retain the quality and safety of packaged products. Polymeric materials can be used to produce a variety of package forms such as film, tray, pouch, rigid container and multilayer film. This review summarizes recent findings and developments of functional polymeric packaging for bakery products. Functional polymerics are mainly produced by the incorporation of non-volatile and volatile active substances that effectively retain the quality of packaged bakery products. Antimicrobial agents (either synthetic or natural substances) have been intensively investigated, whereas advances in coating technology with functional materials either as edible coatings or non-edible coatings have also preserved the quality of packaged bakery products. Recent patents demonstrate novel structural packaging designs combined with active functions to extend the shelf life of bakery products. Other forms of active packaging technology for bakery products include oxygen absorbers and ethanol emitters. The latest research progress of functional polymeric packaging for bakery products, which provides important reference value for reducing the waste and improving the quality of packaged products, is demonstrated. Moreover, the review systematically analyzed the spoilage factors of baked products from physicochemical, chemical and microbiological perspectives. Functional packaging using polymeric materials can be used to preserve the quality of packaged bakery products.

This study evaluates the use of chickpea aquafaba (CA)-based emulsions as a potential substitute for palm oil (PO), using pound cake as a case study. The CA was characterized in terms of pH (6.38 ± 0.01), density (1.02 g mL−1 ± 0.01), color, total soluble solids (6.3 ± 0.2 °Bx), total solids (5.7 ± 0.2%), thermal properties through DSC, and apparent viscosity (2.5 cPa·s−1 ± 0.02 at 300 s−1). Emulsions containing 35, 30, and 25% of CA were produced and applied to cake formulation C1, C2, and C3, respectively. The cake batter was evaluated in terms of apparent density (0.87–1.04 g1 cm−3), rheology, and pH (6.6–6.8). The cakes were evaluated for specific volume, baking loss (8.9–9.5%), color, and symmetry index on day 1, and firmness, water activity (aw), and moisture content (%), after 14 days of storage. The cakes produced with the emulsions were found to have slightly higher specific volume (2.3 cm3 g−1) when compared to the control (C4) produced with PO (2.2 cm3 g−1). The moisture and aw decreased and firmness increased during storage. In terms of formulation (i.e., day 1 for C1, C2, C3, and C4), there was no significant difference for moisture. As for aw, the C4 (0.90) was significantly different from the cakes produced with emulsions (0.91–0.92). The results from the sensory evaluation, carried out with 120 panelists, showed no statistically significant difference between C3 and C4 for the attributes of aroma, color, texture, flavor, and overall impression. Based on our results, it appears that the CA-based emulsions have the potential to replace PO in pound-cake recipes, reducing total and saturated fat.

Oleogels (defined as structured solid-like materials with a high amount of oil entrapped within a three-dimensional network of gelator molecules) represent a healthy alternative to fats that are rich in saturated and trans fatty acids. Given its fatty acids composition (oleic, linoleic, and linolenic acids), olive oil is an excellent candidate for the use of oleogels in the food industry. In this study, a D-optimal mixture design was employed to optimize the replacement of butter with olive oil-based oleogel in a type of sponge cake formulation: the plum cake. In addition, emulsifiers and whey proteins were used as recipe ingredients to extend the product’s shelf life by delaying staling phenomena and mold growth. In the experimental design, oleogel, emulsifier, and whey protein variables were set as the ingredients that change in specific ranges, while hardness, porosity, water activity, and moistness were used to characterize the obtained formulations. The experimental data of each response were fitted through polynomial regression models with the aim of identifying the best plum cake formulation. The results revealed that the best mixture was the formulation containing 76.98% olive oil-based oleogel, 7.28% emulsifier E471, and 15.73% whey protein. We stored the optimized plum cake for 3 months at room temperature and then checked for any hardness and moistness changes or mold spoilage.

Every year, the winemaking process generates large quantities of waste and by-products, the management of which is critical due to the large production in a limited period. Grape pomace is a source of bioactive compounds with antioxidant, anti-inflammatory, cardioprotective and antimicrobial properties. Its chemical composition makes it potentially suitable for preparing high-value food products. The aim of this research was to study the effect of adding grape pomace powder with different particle size fractions (600–425, 425–300, 300–212 and 212–150 µm) to the chemical, technological and sensorial characteristics of muffins. The addition of 15% of grape pomace powder, regardless of particle size, led to muffins rich in antioxidant compounds and total dietary fiber (>3/100 g), which could be labelled with the “source of fiber” nutritional claim according to the EC Regulation 1924/2006. As particle size decreased, total anthocyanins, total phenol content and antioxidant activity (evaluated by ABTS and DPPH assays) increased, while muffin hardness and lightness were negatively influenced. The latter observation was confirmed by the sensory evaluation, which also showed that a smaller particle size led to the presence of irregular crumb pores.

Gluten, a protein fraction from wheat, rye, barley, oats, their hybrids and derivatives, is very important in baking technology. The number of people suffering from gluten intolerance is growing worldwide, and at the same time, the need for foods suitable for a gluten-free diet is increasing. Bread and bakery products are an essential part of the daily diet. Therefore, new naturally gluten-free baking ingredients and new methods of processing traditional ingredients are sought. The study discusses the use of additives to replace gluten and ensure the stability and elasticity of the dough, to improve the nutritional quality and sensory properties of gluten-free bread. The current task is to extend the shelf life of gluten-free bread and bakery products and thus extend the possibility of its distribution in a fresh state. This work is also focused on various technological possibilities of gluten-free bread and the preparation of bakery products.

The effect of exposure of soft wheat buns to Ultraviolet-C radiation (UV-C, 253.7 nm) was studied as an alternative to conventional treatments to control fungal spoilage and prolong shelf life. To identify the most suitable operating conditions, the study included preliminary tests on the permeability of films to UV-C irradiation, and on treatment antifungal efficacy on target microorganisms ( Penicillium digitatum and Saccharomycopsis fibuligera ) in Petri dishes. A 125 µm T9250B film (Cryovac ® Sealed Air S.r.l), commercially available for long-life bread treated with ethanol and conditioned in a modified atmosphere, was selected to pack buns before the UV-C treatment. The study was carried out along with the observation of the fungal growth of buns artificially inoculated with suspensions of P. digitatum and S. fibuligera , treated under UV-C at a distance of 25 cm between bread and the 15 W UV-C source, in comparison to untreated buns used as control. Estimation of fungal growth as well as sensory evaluation was made 2, 4, 7, 10 and 14 days after the treatment. UV-C treated buns showed a noticeable reduction of fungal spoilage and kept a tender texture for up to two weeks after packaging. UV-C treatment represents a good opportunity for the bakery industry, reducing costs and ensuring a prolonged shelf life of a commercial product, respecting the health and hedonistic expectations of the customers.

The use of by-products as functional ingredients for bread recipes may open up new horizons in terms of product innovation to increase nutraceutical characteristics and/or shelf-life. In this research, the ability of residual products from important food chains ( Citrus and wine) to influence the water binding capacity of dough and bread was investigated in order to create industrial breads of high quality with prolonged shelf-life in the absence of any chemical additives (e.g., ethanol, sorbic acid, and propionic acid). The product under study is the 'Pan Bauletto bianco con olio EVO' (white bakery bread with EVO oil), an 'industrial bread' type usually treated with ethanol before being marketed, aiming to prolong its short shelf-life. The effect of the addition of different amounts of pectin ( Citrus supply chain) and grape pomace (wine supply chain), in combination or not, has shown promising results from both a technological point of view and the increasing shelf-life, allowing to obtain products with high nutraceutical value and interesting properties.

Bread is a food that is commonly recognized as a very convenient type of food, but it is also easily prone to microbial attack. As a result of bread spoilage, a significant economic loss occurs to both consumers and producers. For years, the bakery industry has sought to identify treatments that make bread safe and with an extended shelf-life to address this economic and safety concern, including replacing harmful chemical preservatives. New frontiers, on the other hand, have recently been explored. Alternative methods of bread preservation, such as microbial fermentation, utilization of plant and animal derivatives, nanofibers, and other innovative technologies, have yielded promising results. This review summarizes numerous research findings regarding the bio-preservation of bread and suggests potential applications of these techniques. Among these techniques, microbial fermentation using lactic acid bacteria strains and yeast has drawn significant interest nowadays because of their outstanding antifungal activity and shelf-life extending capacity. For example, bread slices with Lactobacillus plantarum LB1 and Lactobacillus rossiae LB5 inhibited fungal development for up to 21 days with the lowest contamination score. Moreover, various essential oils and plant extracts, such as lemongrass oil and garlic extracts, demonstrated promising results in reducing fungal growth on bread and other bakery products. In addition, different emerging bio-preservation strategies such as the utilization of whey, nanofibers, active packaging, and modified atmospheric packaging have gained considerable interest in recent days.

Consumers have given preferences to food products that, in addition to the nutritional properties, also present bioactive characteristics with beneficial health effects. The use of Nonconventional Food Plants (NCFP) has been an asset for the food industry, not only due to its abundance but, also, because it does not compete with other vegetable matrices used for human consumption for its nutritional properties, chemical and bioactive potentiality. The present work aimed to study the granulometry and water absorption index of three seeds of unconventional food plants: niger, millet and birdseed, followed by their nutritional value, content in free sugars, fatty acids, organic acids, tocopherols and phenolic compounds by chromatographic methods and, also, the evaluation of the antioxidant, hepatotoxic and antimicrobial potential in their hydroethanolic extracts. Bakery products were developed with a partial replacement of wheat flour, using the centroid simplex method to understand the effect of applying NCFP flours in the final physical–chemical characteristics. The high granulometry associated with the high water absorption index indicates that the use of NCFP flours would have to be complemented with other flours for baking. The chemical composition of niger seed stood out the most; however, all seeds presented relatively low IC50 and MIC values for the inhibition of lipid peroxidation and antimicrobial activity, respectively. Finally, breads made with a mixture of millet and birdseed flour showed the greatest similarity to the control bread. Considering their composition in bioactive compounds, the use of these seeds is highly advisable in the context of a fortified diet, being sources of compounds of high nutritional value and with beneficial health effects for the final consumer.

At both global and national levels, COVID-19 caused huge changes both in politics and economics, including the agricultural sector and the food industry, from producers, manufacturers, and traders to consumers. Since March 2020, many restrictions and protective measures were introduced worldwide, which only began to be relaxed in the last weeks of spring 2021 as the number of people vaccinated against the coronavirus increased in Hungary. The aim of this study was to investigate the attitudes of Hungarian consumers toward food purchases during the COVID-19 pandemic, in terms of safety. The research was based on the purchase of bakery products, which are basic food products and are most often found in an unpackaged form in Hungarian stores. The BimiLeap® study, a revolutionary tool for uncovering people’s minds, was completed by 125 participants, gathered by a snowballing technique. There were no significant differences among consumers’ attitudes based on the traditional socio-demographic descriptors; however, the mindset-based classification was able to differentiate significantly. The three identified mindsets covered people who themselves consider bakery products, the purchase method, and being in the store as the highest risk of a potential COVID infection.

Bakery products are usually formulated with solid fats, like margarines and shortenings, which contain high levels of saturated and trans-fatty acids and have negative effects on human health. In this study, hydroxypropyl methylcellulose (HPMC) and xanthan gum (XG) were used as oleogelators to prepare oleogels, using sunflower and olive oil, as substitutes for margarine in baked or steamed buns. The effect of oleogels on the physical properties of the buns was evaluated by analyzing the crumb structure, specific volume, height, and texture. In addition, a triangular discriminatory sensory test was conducted, and lipid digestibility was assessed through in vitro digestion studies. Replacement of margarine with oleogels produced steamed buns with no differences in the crumb structure, volume, height, and texture; however, in baked buns, a less porous and harder structure was produced. No differences in texture were observed between the margarine buns and buns made with oleogels when the triangular test was conducted. The extent of lipolysis was not affected when margarine was replaced by oleogels in the baked and steamed buns. The results suggest that using oleogels instead of margarine in buns could represent an interesting strategy to prepare healthier bakery products.

In this study, the production of 4,6-α (4,6-α-GTase) and 4,3-α-glucanotransferase (4,3-α-GTase), expressed previously in Lactococcus lactis , was optimized and these enzymes were used to investigate glycemic index reduction and staling delay in bakery products. HP-SEC analysis showed that the relevant enzymes were able to produce oligosaccharides from potato starch or malto-oligosaccharides. Response Surface Methodology (RSM) was used to optimize enzyme synthesis and the highest enzyme activities of 15.63 ± 1.65 and 19.01 ± 1.75 U/mL were obtained at 1% glucose, pH 6, and 30 °C for 4,6-α-GTase and 4,3-α-GTase enzymes, respectively. SEM analysis showed that both enzymes reduced the size of the starch granules. These enzymes were purified by ultrafiltration and used to produce bread and bun at an enzyme activity of 4 U/g, resulting in a decrease in the specific volume of the bread. It was found that the estimated glycemic index (eGI) of bread formulated with 4,6-α-GTase decreased by 18.01%, and the eGI of bread prepared with 4,3-α-GTase decreased by 13.61%, indicating a potential delay in staling. No significant differences were observed in the sensory properties of the bakery products. This is the first study showing that 4,6-α-GTase and 4,3-α-GTase enzymes have potential in increasing health benefits and improving technological aspects regarding bakery products.

The raspberry ( Rubus idaeus L.) is a soft red fruit consumed worldwide due to its bitter-sweet taste and phenolics-associated health benefits. During plant dormancy, raspberry fruits are discarded. However, this work hypothesised that these fruits have the chemical quality to be valorised, which would mitigate their waste if adequately stabilised. This can be achieved by drying. The Pacific Deluxe and Versailles varieties were dried by freeze- and convective-drying (30 °C and 40 °C). The freeze-dried fruits preserved their colour, drupelets structure, and phenolic content. Convective-drying promoted a significant fruit darkening, which was more evident at 30 °C due to the longer drying process, and a loss of drupelets structure. Both temperatures promoted a similar decrease in phenolic content, as determined by HPLC, although the ABTS ●+ antioxidant activity at 40 °C was lower (IC 50 = 9 compared to 13 μg AAE/mg dry weight). To incorporate dried raspberries into muffin formulations, while keeping their red colour, it was necessary to change the raising agent from sodium bicarbonate to baker's yeast. Sensory analysis by a non-trained panel revealed good acceptance, showing that fresh or dried raspberry fruits from dormancy had suitable characteristics for use as food ingredients.

The development of gluten-free bakery products, the quality of which is comparable to the quality of regular wheat-based products, remains a technological challenge. In this study, flaxseed oil cake (FOC), a by-product of flaxseed oil extraction and a source of nutritional and functional compounds, was used as an ingredient in the experimental bread formulation as partial replacement of starches (5%, 15%, and 30%). The gluten-free breads (GFBs) were evaluated for technological parameters, nutritional value, and sensory quality. Compared with the control, all FOC-enhanced GFBs were significantly ( p < 0.05) richer in proteins, fat, and dietary fibre, with an increase that was proportional to the concentration of FOC in the formulation. At low-to-moderate levels (5% and 15%), FOC improved the specific volume, texture characteristics (reduced crumb hardness, gumminess, and chewiness), and appearance of GFBs, which allowed us to ameliorate its sensory features, but at 30% of FOC, the quality of the crumb texture decreased significantly ( p < 0.005). Among the experimental GFBs, FOC15% exhibited improved technological characteristics and was rated by the sensory panel as the best in terms of overall quality. The results of the conducted research highlighted the benefits of incorporating FOC into GFB as a promising approach to developing a palatable, high-quality bakery product that may be a healthier option for individuals on a gluten-free diet, offering nutritional benefits. Nevertheless, it should be emphasised that the amount of FOC in GFB requires careful regulation.

Sourdough is an old example of a natural starter composed of a mixture of flour, water, and metabolites and is produced by naturally occurring lactic acid bacteria and yeasts that influence bread aroma. In this work, four types of sourdough were used to prepare bread: one sourdough with yeast beer and three with bacteria and yeasts. The physicochemical parameters (pH, moisture, water activity, and organic acids) of the bread and sourdoughs were assessed. Lactic, acetic, and succinic acids were found in considerable amounts in sourdoughs and the corresponding breads. The fermentation quotient (molar ratio between lactic and acetic acid) ranged from 0.39 to 3.4 in sourdoughs. Lactic acid was prevalent in all types of bread and showed the highest value in bread made from sourdough with a 1.5 bacteria/yeast ratio (8722.24 mg/kg). Moreover, volatile organic compounds were identified in bread samples. Alcohols, aldehydes, and acetic acid were mainly found. The alcohol concentration ranged from 140.88 to 401.20 ng/g. Aldehydes ranged from 185.01 to 454.95 ng/g, and acetic acid ranged from 91.40 to 173.81 ng/g. Bread prepared from sourdough with a 1.5 bacteria/yeast ratio showed a considerable amount of alcohols and acetic acid.

In this study, the antifungal activity of white mustard bran (MB), a by-product of mustard (Sinapis alba) milling, and white mustard seed flour (MF) was tested against mycotoxigenic fungi in the agar diffusion method. The results obtained were posteriorly confirmed in a quantitative test, determining the minimum concentration of extract that inhibits the fungal growth (MIC) and the minimum concentration with fungicidal activity (MFC). Since MF demonstrated no antifungal activity, the MB was stored under different temperature conditions and storage time to determine its antifungal stability. Finally, an in situ assay was carried out, applying the MB as a natural ingredient into the dough to avoid P. commune CECT 20767 growth and increase the bread shelf life. The results demonstrated that the antifungal activity of MB was dose-dependent. The higher assayed dose of MB (10 g/kg) reduced the fungal population in 4.20 Log CFU/g regarding the control group. Moreover, the shelf life was extended four days compared to the control, equaling its effectiveness with the synthetic preservative sodium propionate (E-281). Therefore, MB could be an alternative to chemical additives in bread formulations since it satisfies consumer requirements. Also, the formulation of bread with MB valorizes this by-product generated during mustard seed milling, thereby helping the industry move forward sustainably by reducing environmental impact.

Moringa oleifera belongs to the Moringaceae family and is the best known of the native Moringa oleifera genus. For centuries, it has been used as a system of Ayurvedic and Unani medicine and has a wide range of nutritional and bioactive compounds, including proteins, essential amino acids, carbohydrates, lipids, fibre, vitamins, minerals, phenolic compounds, phytosterols and others. These characteristics allow it to have pharmacological properties, including anti-diabetic, anti-inflammatory, anticarcinogenic, antioxidant, cardioprotective, antimicrobial and hepatoprotective properties. The entire Moringa oleifera plant is edible, including its flowers, however, it is not entirely safe, because of compounds that have been found mainly in the root and bark, so the leaf was identified as the safest. Moringa oleifera is recognised as an excellent source of phytochemicals, with potential applications in functional and medicinal food preparations due to its nutritional and medicinal properties; many authors have experimented with incorporating it mainly in biscuits, cakes, brownies, meats, juices and sandwiches. The results are fascinating, as the products increase their nutritional value; however, the concentrations cannot be high, as this affects the organoleptic characteristics of the supplemented products. The aim of this study is to review the application of Moringa oleifera in bakery products, which will allow the creation of new products that improve their nutritional and functional value.

Aroma plays an important role in designing innovative functional foods. This study aimed to study the influence of incorporating herbs from the Lamiaceae family (sage, mint, rosemary, oregano, thyme) on aroma compound formation and sensory properties in oat-buckwheat products. DPPH, FRAP and PCL have been used to describe possible antioxidant activity changes and reduce power of cookies after Lamiaceae Lindl. addition. The volatiles analysis by HS-SPME-GC/MS, has shown that Lamiaceae addition significantly influences the volatiles composition (29 molecules) with a predominance of molecules with a positive sensorial impression. Cookies elaborated with herbs were characterized by a greater share of monoterpenes (e.g., limonene, eucalyptol), in the volatile profile than in control cookies. These compounds’ occurrence was closely correlated with the appearance of herbal odor and taste among sensory attributes in cookies with herbs addition. In contrast, a decrease of negative oil aroma and the bitter aftertaste was noted by a sensory panel. Moreover, in cookies of mint and rosemary, hexanal share decreased about 13 and 9.7-times, respectively. Considering all presented experiments, rosemary addition was the most effective in forming a positive aroma profile with high sensory acceptance and increased functional properties.

Bakery products made from naturally fermented sourdough show a diversified flavor and nutritional profile. Djulis (Chenopodium formosanum), known as red quinoa or Taiwan djulis, originally cultivated by Taiwanese indigenous people in mountain areas in eastern and southern Taiwan, has a high nutritional value and characteristic properties. In the present study, a new bakery product (djulis sourdough bread) was developed and a combination of the Taguchi method coupled with grey theory was utilized to optimize the baking parameters (product formulation). Five main factors, i.e., djulis sourdough (A), hulled djulis (B), oil type (C), a mixture of bread flour (wet gluten content of 29.0%) and a high-gluten flour (wet gluten content of 35.5%) (D), and honey (E), (each at four levels) were chosen for the Taguchi experiment design (L16(4)5). Dependent parameters were the data from texture profile analysis (brittleness, springiness, cohesiveness, gumminess, and chewiness), color analysis (L*, a*, and b*), and sensory evaluation (appearance, aroma, bitterness, sourness, chewiness, and overall acceptance) of the final product. Taguchi grey relational analysis successfully determined the optimal conditions based on combined parameters (5 factors), which highlighted the advantages of this innovative optimization technique. The result shows that the optimal formula for producing a djulis sourdough bread with the best texture, color, and sensory qualities was A3B1C1D2E2, i.e., 20% djulis sourdough, 0% addition of hulled djulis, 8% unsalted butter, 80% wheat flour + 20% high-gluten flour, and 10% honey, respectively. Such a novel application could be a reference for improving the quality of bakery products in the industry. Moreover, it seems that the new bakery product developed in this study has good potential to be commercially produced after further nutritional and economic analysis.

Natural sweeteners, such as agave syrup, might be a healthy alternative to sucrose used in sweet bakery products linked to obesity. We evaluated the effect of sucrose replacement by agave syrup on rheological and microstructural properties of muffin batter and on physical and sensorial properties of the baked product. Muffins were formulated by replacing 25%, 50%, 75%, and 100% of sucrose by agave syrup (AS) and partially hydrolyzed agave syrup (PHAS), and by adding xanthan gum and doubled quantities of leavening agents. Rheological and microstructural properties of batter during baking were analyzed over the range of 25–100 °C. In the muffins, the structure, texture, color, and sensory acceptance were studied. The combination of agave syrup with xanthan gum and doubled quantities of leavening agents affected (p < 0.05) rheological and microstructural properties of the batters and textural properties of the low-sucrose muffins compared to the controls. The increase in agave syrup levels resulted in a darker crumb and crust. Sensory evaluation showed that AS-75 and PHAS-75 were the best alternatives to the control samples. Our results suggest a plausible substitution of up to 75% of sucrose by agave syrup in preparation of muffins, with physical and sensorial characteristics similar to those of their sucrose-containing counterparts.

Microorganisms can be a promising source of bioactive food ingredients derived from unconventional agricultural farms. The quality of batter and final products in which 20%–80% of the fat has been replaced by β-glucan, obtained from microorganisms, was analyzed. The instrumental texture measurements showed that β-glucan batter and muffins were harder than the control sample. Fat substitution over 40%, while enriching muffins with yeast β-glucan (over 2%), led to a decrease in the quality of products after baking and during 14-day storage. The incorporation of 3% or more β-glucan into the composition increased the hardness of the batter and deteriorated the quality of the muffin crumb, after baking and during storage. The sensory study revealed that fat replacement up to 40% with β-glucan provided acceptable biscuits, but higher replacement decreased the overall acceptability.

Lupine and soybean are important technological aids for the food industry. However, they are also capable of inducing severe allergic reactions in food-sensitized/allergic individuals. In this context, this work intended to study the combined effects of thermal processing and food matrix on the immunoreactivity of lupine and soybean proteins used as ingredients in bakery and meat products, respectively. For this purpose, the effects of baking, mild oven cooking, and autoclaving on the protein profiles were evaluated, using model mixtures simulating the production of lupine-containing breads and soybean-containing cooked hams/sausages, by native- and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), and immunoblotting using specific antibodies. The results showed that lupine gamma-conglutin immunoreactivity was slightly decreased in wheat flour mixtures compared to rice, but it was more pronounced in baked products. In meat mixtures, substantial protein fragmentation was noted after autoclaving, with decreased immunoreactivity of soybean trypsin inhibitor. The analysis of 22 commercial products enabled the identification of lupine gamma-conglutin in four bakery samples and soybean trypsin-inhibitor in five sausages, and further differentiated autoclaved from other milder thermally treated products. Generally, the immunoreactivity of target proteins was reduced by all the tested thermal treatments, though at a higher extent after autoclaving, being slightly altered by the food matrix.

Peanut sprouts are known to increase their resveratrol content during germination, leading to cultivation in smart farms. Recently, peanut sprout oil extraction and sales have gained traction; however, processed foods utilizing peanut sprout oil have yet to be developed. In this study, water-in-oil (W/O) emulsion gels were structured with water, peanut sprout oil (PSO), sorbitan monostearate (SMS), and candelilla wax (CW) in different ratios, and their potential as shortening substitutes in muffins was evaluated on physicochemical and sensory properties. PSO comprised 67% unsaturated fatty acids and had higher phospholipid (17.97%) and resveratrol (15.95 µg/L) contents and antioxidant activity (71.52%) compared to peanut oil. The PSO emulsion gels were physically structured without changing their chemical compositions. The SMS and CW ratios were found to have a significant influence on the textural properties, solid fat content, rheology, and crystallization of the emulsion gels. The viscoelastic properties of the emulsion gels showed a higher storage modulus than loss modulus and increased with increasing gelator content. Muffins prepared with emulsion gels were characterized by a harder texture and larger pore size, while in the case of muffins mixed with a ratio of 25% SMS and 75% CW, there was no significant difference in overall preference of sensory evaluation compared to shortening muffins. Thus, these findings reveal the potential utility of PSO as a fat substitute and indicate that W/O emulsion gels are suitable for producing muffins without a loss of quality.

Milk fats and related dairy products are multi-functional ingredients in bakeries. Bakeries are critical local industries in Western countries, and milk fats represent the most important dietary lipids in countries such as New Zealand. Milk fats perform many roles in bakery products, including dough strengthening, textural softeners, filling fats, coating lipids, laminating fats, and flavor improvers. This review reports how milk fats interact with the ingredients of main bakery products. It also elaborates on recent studies on how to modulate the quality and digestibility of baked goods by designing a new type of fat mimetic, in order to make calorie- and saturated fat-reduced bakery products. It provides a quick reference for both retailers and industrial manufacturers of milk fat-based bakery products.

The use of quinoa could be a strategy for the nutritional improvement of bakery products. The inclusion of this pseudocereal, with its suitable balance of carbohydrates, proteins, lipids and minerals, could contribute to attaining the adequate intake values proposed by the FAO (Food and Agriculture Organization) and/or EFSA (European Food Safety Authority) for suitable maintenance and improvement of the population’s health. Bakery products made with white, red or black royal quinoa significantly improved the contribution to an adequate intake of polyunsaturated fatty acids (linoleic and linolenic acids) and dietary fibre, which produced an improvement in the soluble/insoluble fibre ratio. There was also an increase in the contribution to the average requirement of Fe and Zn, although the increase in the phytate/mineral ratio would make absorption of them more difficult. Inclusion of flour obtained from the three quinoas studied slightly improved the protein quality of the products that were prepared and positively affected the reduction in their glycaemic index.

Canola, Brassica napus L., is a major oilseed crop that has various uses in the food, feed, and industrial sectors. It is one of the most widely produced and consumed oilseeds in the world because of its high oil content and favorable fatty acid composition. Canola grains and their derived products, such as canola oil, meal, flour, and bakery products, have a high potential for food applications as they offer various nutritional and functional benefits. However, they are affected by various factors during the production cycle, post-harvest processing, and storage. These factors may compromise their quality and quantity by affecting their chemical composition, physical properties, functional characteristics, and sensory attributes. Therefore, it is important to optimize the production and processing methods of canola grains and their derived products to ensure their safety, stability, and suitability for different food applications. This literature review provides a comprehensive overview of how these factors affect the quality of canola grains and their derived products. The review also suggests future research needs and challenges for enhancing canola quality and its utilization in food.

Baker’s yeast intolerance is rising among Western populations, where Saccharomyces cerevisiae is spread in fermented food and food components. Zymomonas mobilis is a bacterium commonly used in tropical areas to produce alcoholic beverages, and it has only rarely been considered for dough leavening probably because it only ferments glucose, fructose and sucrose, which are scarcely present in flour. However, through alcoholic fermentation, similarly to S. cerevisiae, it provides an equimolar mixture of ethanol and CO2 that can rise a dough. Here, we propose Z. mobilis as a new leavening agent, as an alternative to S. cerevisiae, overcoming its technological limit with different strategies: (1) adding glucose to the dough formulation; and (2) exploiting the maltose hydrolytic activity of Lactobacillus sanfranciscensis associated with Z. mobilis. CO2 production, dough volume increase, pH value, microbial counts, sugars consumption and ethanol production were monitored. Results suggest that glucose addition to the dough lets Z. mobilis efficiently leaven a dough, while glucose released by L. sanfranciscensis is not so well fermented by Z. mobilis, probably due to the strong acidification. Nevertheless, the use of Z. mobilis as a leavening agent could contribute to increasing the variety of baked goods alternative to those leavened by S. cerevisiae.

In this study, gluten-free doughs with rice flour, substituted by 15% fractions of different carob seed flours, were prepared by varying their water content. The coarse carob fraction A (median particle size of flour, D 50 : 258.55 μm) was rich in fibers, fraction B (D 50 : 174.73 μm) was rich in protein, C (D 50 : 126.37 μm) was rich in germ protein, and fraction D (D 50 : 80.36 μm) was a mix, reconstituted from the other fractions and pulverized using a jet mill. Τhe experimental data of the dough's volume over time were fitted to the Gompertz model for each carob fraction and water content. The calculated parameters of the model were the maximum relative volume expansion ratio ( a ), the maximum specific volume growth rate ( μ ), and the time lag of the leavening process ( t lag ). Gompertz's equation adequately described the individual experimental curves. In the next step, a composite model was applied for each carob fraction where the parameters a and t lag were expressed as quadratic functions of water content levels ( W ), while μ was linearly dependent on W . Each carob fraction presented an optimum water content level for which dough height was maximized and time lag was minimized. Optimized dough volume could be predicted by the composite model; it was shifted to lower values as finer carob flour was used. In respect to baked products, softer breads were produced using finer carob flour and porosity values were higher at optimum water content levels. The investigated fermentation kinetics' models provide significant information about the role of water and carob flour on gluten-free dough development and bread volume expansion.