Search

Particularly crucial throughout the mode transition procedure is the transmission properties of hydro–mechanical composite transmission devices. This paper describes a multipurpose power transmission device that integrates hydrostatic, hydro-mechanical, and mechanical transmission and mainly discusses the transmission characteristic optimization problem from the perspective of speed regulation characteristics, shift strategy, and efficiency characteristics. The kinematic and dynamic analysis of the transmission system, the assembly scheme, and relevant parameters of the power transmission device are analyzed, and the speed regulation characteristic curve is obtained. The shift strategy of power transmission devices involving clutches and brakes during the whole speed regulation process and the best switch time of each component are found. The efficiency expression of the static pressure system is obtained from the efficiency model of the pump-control-motor system, and the efficiency of the multi-purpose power transmission device is obtained using the efficiency definition method. The fitting curves of hydrostatic system efficiency are determined using experimental data, and the efficiency of the hydro–mechanical composite power transmission system is obtained using the conversion mechanism method. The results show that the shift quality of power transmission devices can be improved greatly by controlling the switch sequence of clutches and brakes reasonably.

This paper proposes a novel vehicle state estimation (VSE) method that combines a physics-informed neural network (PINN) and an unscented Kalman filter on manifolds (UKF-M). This VSE aimed to achieve inertial measurement unit (IMU) calibration and provide comprehensive information on the vehicle’s dynamic state. The proposed method leverages a PINN to eliminate IMU drift by constraining the loss function with ordinary differential equations (ODEs). Then, the UKF-M is used to estimate the 3D attitude, velocity, and position of the vehicle more accurately using a six-degrees-of-freedom vehicle model. Experimental results demonstrate that the proposed PINN method can learn from multiple sensors and reduce the impact of sensor biases by constraining the ODEs without affecting the sensor characteristics. Compared to the UKF-M algorithm alone, our VSE can better estimate vehicle states. The proposed method has the potential to automatically reduce the impact of sensor drift during vehicle operation, making it more suitable for real-world applications.

This paper provides a multi-agent coordinated control system to improve the real-time performance of intelligent vehicle active collision avoidance. At first, the functions and characteristics of longitudinal and lateral collision avoidance agents are analyzed, which are the main components of the multi-agent. Then, a coordinated solution mechanism of an intelligent vehicle collision avoidance system is established based on hierarchical control and blackboard model methods to provide a reasonable way to avoid collision in complex situations. The multi-agent coordinated control system can handle the conflict between the decisions of different agents according to the rules. Comparing with existing control strategies, the proposed system can realize multi decisions and planning at the same time; thus, it will reduce the operation time lag during active collision avoidance. Additionally, fuzzy sliding mode control theory is introduced to guarantee accurate path tracking in lateral collision avoidance. Finally, co-simulation of Carsim and Simulink are taken, and the results show that the real-time behavior of intelligent vehicle collision avoidance can be improved by 25% through the system proposed.

In order to solve the problem of high fuel consumption and poor emission performance in high horsepower tractors, a parallel hybrid tractor system was designed using a dual power source of an engine and motor matched with a hydro-mechanical continuously variable transmission (HMCVT). An equivalent fuel consumption minimization strategy (ECMS) was used for power distribution of this hybrid system. To address the problem of poor adaptability of the equivalence factor to different working cycles in the conventional ECMS, a fuzzy adaptive equivalent fuel consumption minimization strategy (FA-ECMS) was proposed. A fuzzy PI controller based on battery SOC (State of Charge) feedback was designed to adjust the equivalence factor in real time, so as to achieve adaptive control of the equivalence factor. The physical model of the system was built by SimulationX, and the model of the control strategy was built using Matlab/Simulink. Two typical cycles of tractor plowing and road transportation were simulated. Under ECMS, the fuel consumption of the hybrid agricultural tractor was 14.3 L and 1.19 L in one plowing cycle and one transport cycle, respectively, with final battery SOC values of 60.75% and 60.32%, respectively. Under FA-ECMS, the hybrid farm tractor consumed 13.34 L and 1.13 L in one plowing cycle and one transport cycle, respectively, with final battery SOC values of 60.27% and 60.17%, respectively. The results showed that, with the introduction of a fuzzy PI controller to dynamically adjust the equivalence factor, the overall fuel consumption was reduced by 6.71% and 5.04%, respectively, and the battery power maintenance performance was improved. The designed control strategy could achieve a more reasonable power distribution between the engine and motor while maintaining the balance of the battery SOC.

The existing intelligent vehicle trajectory-planning methods have limitations in terms of efficiency and safety. To overcome these limitations, this paper proposes an automatic driving trajectory-planning method based on a variable Gaussian safety field. Firstly, the time series bird’s-eye view is used as the input state quantity of the network, which improves the effectiveness of the trajectory planning policy network in extracting the features of the surrounding traffic environment. Then, the policy gradient algorithm is used to generate the planned trajectory of the autonomous vehicle, which improves the planning efficiency. The variable Gaussian safety field is used as the reward function of the trajectory planning part and the evaluation index of the control part, which improves the safety of the reinforcement learning vehicle tracking algorithm. The proposed algorithm is verified using the simulator. The obtained results show that the proposed algorithm has excellent trajectory planning ability in the highway scene and can achieve high safety and high precision tracking control.

Tractors are usually applied in field operations, road transport, and other operations. Modern agriculture has higher design requirements for tractor powertrains due to the complicated working environments and various operations. To meet the driving requirements of the tractor under multiple operations, a mechanic-electronic-hydraulic powertrain system (MEH-PS) for tractors has been designed according to the characteristics of the hydro-mechanical composite transmission and electromechanical hybrid system. The principle of multiple driven and transmission modes of MEH-PS are introduced, the speed regulation characteristic curve of hydro-mechanical transmission (HMT) is given, and the related power element model, tractor model, and efficiency model are established. The HMT optimal economy transmission ratio control strategy and hybrid rule-based optimization energy management strategy were developed. Take three typical tractor operations for analysis: ploughing, harvesting, and transport. The results show that the engine operating points are mainly distributed in the higher load area, the tractor maintains high system efficiency, and the relative error between simulated and tested fuel consumption is within 5%, which further proves the reliability of the model. The solution also showed lower fuel consumption in all three operations compared to DLG’s announced PowerShift tractors and CVT tractors. Thus, the powertrain system can meet the tractor’s drive requirements under complex operating conditions and maintain high efficiency and is therefore suitable for tractors that need to operate frequently in the field and on the road.

Accurate and reliable estimation information of sideslip angle is very important for intelligent motion control and active safety control of an autonomous vehicle. To solve the problem of sideslip angle estimation of an autonomous vehicle, a sideslip angle fusion estimation method based on robust cubature Kalman filter and wheel-speed coupling relationship is proposed in this paper. The vehicle dynamics model, tire model, and wheel speed coupling model are established and discretized, and a robust cubature Kalman filter is designed for vehicle running state estimation according to the discrete vehicle model. An adaptive measurement-update solution of the robust cubature Kalman filter is presented to improve the robustness of estimation, and then, the wheel-speed coupling relationship is introduced to the measurement update equation of the robust cubature Kalman filter and an adaptive sideslip angle fusion estimation method is designed. The simulations in the CarSim-Simulink co-simulation platform and the actual vehicle road test are carried out, and the effectiveness of the proposed estimation method is validated by corresponding comparative analysis results.

Vehicle detection is a key component of environmental sensing systems for Intelligent Vehicles (IVs). The traditional shallow model and offline learning-based vehicle detection method are not able to satisfy the real-world challenges of environmental complexity and scene dynamics. Focusing on these problems, this work proposes a vehicle detection algorithm based on a multiple feature subspace distribution deep model with online transfer learning. Based on the multiple feature subspace distribution hypothesis, a deep model is established in which multiple Restricted Boltzmann Machines (RBMs) construct the lower layers and a Deep Belief Network (DBN) composes the superstructure. For this deep model, an unsupervised feature extraction method is applied, which is based on sparse constraints. Then, a transfer learning method with online sample generation is proposed based on the deep model. Finally, the entire classifier is retrained online with supervised learning. The experiment is actuated using the KITTI road image datasets. The performance of the proposed method is compared with many state-of-the-art methods and it is demonstrated that the proposed deep transfer learning-based algorithm outperformed existing state-of-the-art methods.

Visual-based vehicle detection has been studied extensively, however there are great challenges in certain settings. To solve this problem, this paper proposes a probabilistic framework combining a scene model with a pattern recognition method for vehicle detection by a stationary camera. A semisupervised viewpoint inference method is proposed in which five viewpoints are defined. For a specific monitoring scene, the vehicle motion pattern corresponding to road structures is obtained by using trajectory clustering through an offline procedure. Then, the possible vehicle location and the probability distribution around the viewpoint in a fixed location are calculated. For each viewpoint, the vehicle model described by a deformable part model (DPM) and a conditional random field (CRF) is learned. Scores of root and parts and their spatial configuration generated by the DPM are used to learn the CRF model. The occlusion states of vehicles are defined based on the visibility of their parts and considered as latent variables in the CRF. In the online procedure, the output of the CRF, which is considered as an adjusted vehicle detection result compared with the DPM, is combined with the probability of the apparent viewpoint in a location to give the final vehicle detection result. Quantitative experiments under a variety of traffic conditions have been contrasted to test our method. The experimental results illustrate that our method performs well and is able to deal with various vehicle viewpoints and shapes effectively. In particular, our approach performs well in complex traffic conditions with vehicle occlusion.

The problem of missing values (MVs) in traffic sensor data analysis is universal in current intelligent transportation systems because of various reasons, such as sensor malfunction, transmission failure, etc. Accurate imputation of MVs is the foundation of subsequent data analysis tasks since most analysis algorithms need complete data as input. In this work, a novel MVs imputation approach termed as kernel sparse representation with elastic net regularization (KSR-EN) is developed for reconstructing MVs to facilitate analysis with traffic sensor data. The idea is to represent each sample as a linear combination of other samples due to inherent spatiotemporal correlation, as well as periodicity of daily traffic flow. To discover few yet correlated samples and make full use of the valuable information, a combination of l1-norm and l2-norm is employed to penalize the combination coefficients. Moreover, the linear representation among samples is extended to nonlinear representation by mapping input data space into high-dimensional feature space, which further enhances the recovery performance of our proposed approach. An efficient iterative algorithm is developed for solving KSR-EN model. The proposed method is verified on both an artificially simulated dataset and a public road network traffic sensor data. The results demonstrate the effectiveness of the proposed approach in terms of MVs imputation.

Exact estimation of longitudinal force and sideslip angle is important for lateral stability and path-following control of four-wheel independent driven electric vehicle. This paper presents an effective method for longitudinal force and sideslip angle estimation by observer iteration and information fusion for four-wheel independent drive electric vehicles. The electric driving wheel model is introduced into the vehicle modeling process and used for longitudinal force estimation, the longitudinal force reconstruction equation is obtained via model decoupling, the a Luenberger observer and high-order sliding mode observer are united for longitudinal force observer design, and the Kalman filter is applied to restrain the influence of noise. Via the estimated longitudinal force, an estimation strategy is then proposed based on observer iteration and information fusion, in which the Luenberger observer is applied to achieve the transcendental estimation utilizing less sensor measurements, the extended Kalman filter is used for a posteriori estimation with higher accuracy, and a fuzzy weight controller is used to enhance the adaptive ability of observer system. Simulations and experiments are carried out, and the effectiveness of proposed estimation method is verified.