Search

Buildings are important components of urban areas, and the construction of rooftop photovoltaic systems plays a critical role in the transition to renewable energy generation. With rooftop solar photovoltaics receiving increased attention, the problem of how to estimate rooftop photovoltaics is under discussion; building detection from remote sensing images is one way to address it. In this study, we presented an available approach to estimate a building’s rooftop solar photovoltaic potential. A rapid and accurate rooftop extraction method was developed using object-based image classification combining normalized difference vegetation index (NDVI) and digital surface models (DSMs), and a method for the identification of suitable rooftops for solar panel installation by analysing the geographical restrictions was proposed. The approach was validated using six scenes from Beijing that were taken using Chinese Gaofen-2 (GF-2) satellite imagery and Pleiades imagery. A total of 176 roofs in six scenarios were suitable for PV installation, and the estimated photovoltaic panel area was 205,827 m2. The rooftop photovoltaic potential was estimated to total 22,551 GWh. The results indicated that the rooftop photovoltaic potential estimation method performs well.

Photovoltaic (PV) power generation has become an important clean energy generation source. In the context of transportation development and its very large energy demand, scholars have begun to use PV power generation technology on roads and their surrounding road spaces. Current research on PV power generation in road spaces has mostly focused on its feasibility and technical potential, but there have been few studies on its economic potential. For this reason, this paper used the Zhengding County of Hebei Province, China, to study the evaluation method of the technical and economic potential of PV power generation in road spaces and to analyze the development potential of PV power generation in road spaces. The results show that Zhengding County has a very high amount of road space available for PV power generation, with an effective PV installation area of 20.98 km2 and an annual theoretical power generation capacity of 1.5 billion kWh. If the PV road space project is fully operational in 2021, it could be profitable by 2026, and the net profit (NP) could reach $705 million in 2030. The application of photovoltaic power generation in road spaces is a very promising method of sustainable energy supply.

The long time series and consistent “urban core-suburban-rural” (USR) structure in a city region is essential to understanding urban–suburban–rural interaction and urbanization pathways. It is always considered to be a single land use type (e.g., impervious area) in remote sensing research. The long-term (1992–present) nighttime light (NTL) data of the Defense Meteorological Satellite Program-Operational Linescan System (DMSP-OLS) and the Suomi National Polar-Orbiting Partnership Visible Infrared Imaging Radiometer Suite (NPP-VIIRS) provide the potential for retrieving time series of USR structure. In this study, we propose an improved approach to mapping the USR structure of the three subcategories based on a heuristic algorithm of Mann–Kendall mutation detection on the NTL quantile curve. First, a minor adjustment of VIIRS NTL is applied for matching the value ranges of DMSP NTL data and keeping the advantage of VIIRS to generate a long-term NTL dataset. Second, the heuristic algorithm of Mann–Kendall mutation detection is processed to find two optimal thresholds in the NTL quantile curve, which is used for USR extraction. Finally, a temporal consistency check is used to post-process the initial USR area for obtaining a more consistent and reliable USR sequence. To evaluate the performance of the proposed method, we retrieved the USR structures of 19 typical cities in China from 1992 to 2020 based on NTL datasets. The evaluations of spatiotemporal consistency compared with the validation data indicate that the USR retrieval results show good agreement with the land use map derived from Landsat images and the time series product from MODIS. The average overall accuracy (OA) of overall urban extent is higher than 0.95 and the average kappa coefficient (KC) reaches 0.6. Moreover, we investigated the urban dynamics and USR interactions of 19 cities from 1992 to 2020. Overall, this study proposes an improved approach for long-term USR mapping from NTL images at a regional scale and it will provide a valuable method for urbanization dynamics analysis.

Accurate and timely information on the “core urban-suburban-rural” (USR) spatial structure in a metropolitan region is significant for both the scientific and policy-making communities. However, USR is usually considered as a single land use type, such as an impervious area, rather than three combined subcategories in remote-sensing image retrieval, especially for suburban areas, which obscures the details of the urbanization process. In this paper, we propose a quantile approach to retrieve the structure of USR based on stable nighttime light (NTL) data from the Defense Meteorological Satellite Program/Operational Linescan System (DMSP/OLS) and apply it in the Beijing-Tianjin-Hebei (JJJ) of China from 1995 to 2013. The key parameters of the NTL threshold, which is the maximum change point of the NTL intensity at the USR boundary, used to retrieve the three subcategories of USR are automatically defined based on the quantile approach with three iterations. Then, the overall accuracy and consistency of the retrieval results are evaluated using the corresponding visual interpretation map from Landsat images with a 30 m resolution. Moreover, the influence of parameter uncertainty is compared by introducing the human settlement index (HSI). According to the time-series analysis of USR retrieval in this study, the JJJ experienced rapid urbanization from 1995 to 2013, with the core urban area expanding by 7098 km2 (average increase of 2.7 times), the suburban area expanding by 12,690 km2 (average increase of 2.8 times), and the rural area increasing by 4986 km2 (average increase of 0.38 times). The USR results retrieved based on the approach agree well with the validation of the visual interpretation map, with an overall accuracy (OA) of 0.904 and a kappa coefficient (KC) of 0.650 at the city level. The USR result with the HSI as the input shows that NTL is more suitable for USR structure retrieval as the NTL shows less uncertainty compared with other parameters such as the vegetation index (VI). This study proposes an improved quantile approach for USR mapping from NTL images on a regional scale, which will provide a useful method for urbanization dynamics analysis.

Land cover is one of key indicators for modeling ecological, environmental, and climatic processes, which changes frequently due to natural factors and anthropogenic activities. The changes demand various samples for updating land cover maps, although in reality the number of samples is always insufficient. Sample augment methods can fill this gap, but these methods still face difficulties, especially for high-resolution remote sensing data. The difficulties include the following: (1) excessive human involvement, which is mostly caused by human interpretation, even by active learning-based methods; (2) large variations of segmented land cover objects, which affects the generalization to unseen areas especially for proposed methods that are validated in small study areas. To solve these problems, we proposed a sample augment method incorporating the deep neural networks using a Gaofen-2 image. To avoid error accumulation, the neural network-based sample augment (NNSA) framework employs non-iterative procedure, and augments from 184 image objects with labels to 75,112 samples. The overall accuracy (OA) of NNSA is 20% higher than that of label propagation (LP) in reference to expert interpreted results; the LP has an OA of 61.16%. The accuracy decreases by approximately 10% in the coastal validation area, which has different characteristics from the inland samples. We also compared the iterative and non-iterative strategies without external information added. The results of the validation area containing original samples show that non-iterative methods have a higher OA and a lower sample imbalance. The NNSA method that augments sample size with higher accuracy can benefit the update of land cover information.

High-resolution remotely sensed imageries have been widely employed to detect urban villages (UVs) in highly urbanized regions, especially in developing countries. However, the understanding of the potential impacts of spatially and temporally differentiated urban internal development on UV detection is still limited. In this study, a partition-strategy-based framework integrating the random forest (RF) model, object-based image analysis (OBIA) method, and high-resolution remote sensing images was proposed for the UV-detection model. In the core regions of Guangzhou, four original districts were re-divided into five new zones for the subsequent object-based RF-detection of UVs with a series features, according to the different proportion of construction lands. The results show that the proposed framework has a good performance on UV detection with an average overall accuracy of 90.23% and a kappa coefficient of 0.8. It also shows the possibility of transferring samples and models into a similar area. In summary, the partition strategy is a potential solution for the improvement of the UV-detection accuracy through high-resolution remote sensing images in Guangzhou. We suggest that the spatiotemporal process of urban construction land expansion should be comprehensively understood so as to ensure an efficient UV-detection in highly urbanized regions. This study can provide some meaningful clues for city managers identifying the UVs efficiently before devising and implementing their urban planning in the future.

Crop above-ground biomass (AGB) is a key parameter used for monitoring crop growth and predicting yield in precision agriculture. Estimating the crop AGB at a field scale through the use of unmanned aerial vehicles (UAVs) is promising for agronomic application, but the robustness of the methods used for estimation needs to be balanced with practical application. In this study, three UAV remote sensing flight missions (using a multiSPEC-4C multispectral camera, a Micasense RedEdge-M multispectral camera, and an Alpha Series AL3-32 Light Detection and Ranging (LiDAR) sensor onboard three different UAV platforms) were conducted above three long-term experimental plots with different tillage treatments in 2018. We investigated the performances of the multi-source UAV-based 3D point clouds at multi-spatial scales using the traditional multi-variable linear regression model (OLS), random forest (RF), backpropagation neural network (BP), and support vector machine (SVM) methods for accurate AGB estimation. Results showed that crop height (CH) was a robust proxy for AGB estimation, and that high spatial resolution in CH datasets helps to improve maize AGB estimation. Furthermore, the OLS, RF, BP, and SVM methods all maintained an acceptable accuracy for AGB estimation; however, the SVM and RF methods performed slightly more robustly. This study is expected to optimize UAV systems and algorithms for specific agronomic applications.

Leaf area index (LAI) is a key biophysical parameter for monitoring crop growth status, predicting crop yield, and quantifying crop variability in agronomic applications. Mapping the LAI at the field scale using multispectral cameras onboard unmanned aerial vehicles (UAVs) is a promising precision-agriculture application with specific requirements: The LAI retrieval method should be (1) robust so that crop LAI can be estimated with similar accuracy and (2) easy to use so that it can be applied to the adjustment of field management practices. In this study, three UAV remote-sensing missions (UAVs with Micasense RedEdge-M and Cubert S185 cameras) were carried out over six experimental plots from 2018 to 2019 to investigate the performance of reflectance-based lookup tables (LUTs) and vegetation index (VI)-based LUTs generated from the PROSAIL model for wheat LAI retrieval. The effects of the central wavelengths and bandwidths for the VI calculations on the LAI retrieval were further examined. We found that the VI-LUT strategy was more robust and accurate than the reflectance-LUT strategy. The differences in the LAI retrieval accuracy among the four VI-LUTs were small, although the improved modified chlorophyll absorption ratio index-lookup table (MCARI2-LUT) and normalized difference vegetation index-lookup table (NDVI-LUT) performed slightly better. We also found that both of the central wavelengths and bandwidths of the VIs had effects on the LAI retrieval. The VI-LUTs with optimized central wavelengths (red = 612 nm, near-infrared (NIR) = 756 nm) and narrow bandwidths (~4 nm) improved the wheat LAI retrieval accuracy (R2 ≥ 0.75). The results of this study provide an alternative method for retrieving crop LAI, which is robust and easy use for precision-agriculture applications and may be helpful for designing UAV multispectral cameras for agricultural monitoring.

Solar radiation is an important input for various land-surface energy balance models. Global solar radiation data retrieved from the Japanese Geostationary Meteorological Satellite 5 (GMS-5)/Visible and Infrared Spin Scan Radiometer (VISSR) has been widely used in recent years. However, due to the impact of clouds, aerosols, solar elevation angle and bidirectional reflection, spatial or temporal deficiencies often exist in solar radiation datasets that are derived from satellite remote sensing, which can seriously affect the accuracy of application models of land-surface energy balance. The goal of reconstructing radiation data is to simulate the seasonal variation patterns of solar radiation, using various statistical and numerical analysis methods to interpolate the missing observations and optimize the whole time-series dataset. In the current study, a reconstruction method based on data assimilation is proposed. Using a Kalman filter as the assimilation algorithm, the retrieved radiation values are corrected through the continuous introduction of local in-situ global solar radiation (GSR) provided by the China Meteorological Data Sharing Service System (Daily radiation dataset_Version 3) which were collected from 122 radiation data collection stations over China. A complete and optimal set of time-series data is ultimately obtained. This method is applied and verified in China’s northern agricultural areas (humid regions, semi-humid regions and semi-arid regions in a warm temperate zone). The results show that the mean value and standard deviation of the reconstructed solar radiation data series are significantly improved, with greater consistency with ground-based observations than the series before reconstruction. The method implemented in this study provides a new solution for the time-series reconstruction of surface energy parameters, which can provide more reliable data for scientific research and regional renewable-energy planning.

Bio-energy from energy plants is expected to play an increasing role in the future energy system, with benefits in terms of reducing greenhouse gas emissions and improving energy security. Pistacia chinensis is believed to be one of the most promising non-food input for biodiesel production. This study focused on the marginal land availability for developing Pistacia chinensis-based bioenergy in China. The spatial distribution, quality and total amount of marginal land resources suitable for cultivating Pistacia chinensis were identified with multiple datasets (natural habitat, remote sensing-derived land use, meteorological and soil data) and geoinformatic techniques. The results indicate that the area of marginal land exploitable for Pistacia chinensis plantations in China is 19.90 million hectares, which may produce approximately 56.85 million tons of biodiesel each year. The spatial variation of both marginal land resources and biodiesel potential are also presented. The results can be useful for national and regional bio-energy planning.

Solar energy is the most clean renewable energy source and has good prospects for future sustainable development. Installation of solar photovoltaic (PV) systems on building rooftops has been the most widely applied method for using solar energy resources. In this study, we developed an approach to simulate the monthly and annual solar radiation on rooftops at an hourly time step to estimate the solar PV potential, based on rooftop feature retrieval from remote sensing images. The rooftop features included 2D rooftop outlines and 3D rooftop parameters retrieved from high-resolution remote sensing image data (obtained from Google Maps) and digital surface model (DSM, generated from the Pleiades satellite), respectively. We developed the building features calculation method for five rooftop types: flat rooftops, shed rooftops, hipped rooftops, gable rooftops and mansard rooftops. The parameters of the PV modules derived from the building features were then combined with solar radiation data to evaluate solar photovoltaic potential. The proposed method was applied in the Chao Yang District of Beijing, China. The results were that the number of rooftops available for PV systems was 743, the available rooftop area was 678,805 m2, and the annual PV electricity potential was 63.78 GWh/year in the study area, which has great solar PV potential. The method to perform precise calculation of specific rooftop solar PV potential developed in this study will guide the formulation of energy policy for solar PV in the future.

With the development of satellite and remote sensing techniques, more and more image data from airborne/satellite sensors have become available. Multi-sensor image fusion seeks to combine information from different images to obtain more inferences than can be derived from a single sensor. In image-based application fields, image fusion has emerged as a promising research area since the end of the last century. The paper presents an overview of recent advances in multi-sensor satellite image fusion. Firstly, the most popular existing fusion algorithms are introduced, with emphasis on their recent improvements. Advances in main applications fields in remote sensing, including object identification, classification, change detection and maneuvering targets tracking, are described. Both advantages and limitations of those applications are then discussed. Recommendations are addressed, including: (1) Improvements of fusion algorithms; (2) Development of “algorithm fusion” methods; (3) Establishment of an automatic quality assessment scheme.

The spatial distribution of population is closely related to land use and land cover (LULC) patterns on both regional and global scales. Population can be redistributed onto geo-referenced square grids according to this relation. In the past decades, various approaches to monitoring LULC using remote sensing and Geographic Information Systems (GIS) have been developed, which makes it possible for efficient updating of geo-referenced population data. A Spatial Population Updating System (SPUS) is developed for updating the gridded population database of China based on remote sensing, GIS and spatial database technologies, with a spatial resolution of 1 km by 1 km. The SPUS can process standard Moderate Resolution Imaging Spectroradiometer (MODIS L1B) data integrated with a Pattern Decomposition Method (PDM) and an LULC-Conversion Model to obtain patterns of land use and land cover, and provide input parameters for a Population Spatialization Model (PSM). The PSM embedded in SPUS is used for generating 1 km by 1 km gridded population data in each population distribution region based on natural and socio-economic variables. Validation results from finer township-level census data of Yishui County suggest that the gridded population database produced by the SPUS is reliable.

Land cover information extraction through object-based image analysis (OBIA) has become an important trend in remote sensing, thanks to the increasing availability of high-resolution imagery. Segmented objects have a large number of features that cause high-dimension and low-sample size problems in the classification process. In this study, on the basis of a partial least squares generalized linear regression (PLSGLR), we propose a group corrected PLSGLR, known as G-PLSGLR, that aims to reduce the redundancy of object features for land cover identifications. Using Gaofen-2 images, the area of interest was segmented and sampled to generate small sample-size training datasets with 51 object features. The features selected by G-PLSGLR were compared against a guided regularized random forest (GRRF) in metrics of reduction rate, feature redundancy, and accuracy assessment of classification. Three indicators of overall accuracy (OA), user’s accuracy (UA), and producer’s accuracy (PA) were applied for accuracy assessment in this paper. The result shows that the G-PLSGLR achieved a reduction rate of 9.27 with a feature redundancy of 0.29, and a value of OA 90.63%. The GRRF achieved a reduction rate of 1.61 with a feature redundancy of 0.42, and a value of OA 85.56%. The PA of each land cover category was more than 95% using features selected by G-PLSGLR, while the PA ranged from 77 to 96% using features selected by GRRF. The UA of G-PLSGLR-selected features ranged from 70 to 80% except for grass land and bare land, which achieved 10% higher UA than GRRF-selected features. The G-PLSGLR method we proposed has the advantages of a large reduction rate, low feature redundancy, and high classification performance, which can be applied in OBIA-based land cover classification.