Search

This study investigates the combined impact of Trinidad Lake Asphalt (TLA) and styrene–isoprene–styrene (SIS) on the performance of PG 64-22 asphalt binder. The study specifically examines how the addition of TLA and SIS affects the stiffness, viscoelastic properties, and ability to resist deformation of the asphalt binder, using the Superpave test method. The findings demonstrate that the addition of SIS improves the ability to withstand deformation, with the best results seen in the mixture containing 20% TLA and 5% SIS. This blend achieves a harmonious combination of stiffness, pliability, and ease of use. Increasing the SIS content to 10% and combining it with a 20% TLA greatly enhances resistance to rutting, but it also decreases workability. In addition, a mixture consisting of 10% TLA and 10% SIS provides excellent resistance to fatigue and possesses viscoelastic properties that are well suited for reducing oxidative aging and cracking. Although SIS typically enhances the performance of binders, an excessive quantity can result in unwanted rigidity, requiring meticulous optimization. The results highlight the importance of customizing TLA–SIS combinations according to specific environmental conditions in order to optimize advantages. Subsequent studies should investigate the prolonged impacts and alternative combinations of additives to further improve the performance of binders.

Increasing the content of reclaimed asphalt pavement material (RAP) in hot-mix recycled asphalt mixture (RHMA) with a satisfactory performance has been a hot topic in recent years. In this study, the performances of Trinidad lake asphalt (TLA), virgin asphalt binder, and aged asphalt binder were first compared, and then the modification mechanism of TLA on virgin asphalt and aged asphalt was explored. Furthermore, the RHMA was designed in accordance with the French norm NF P 98-140 containing 50% and 100% RAP, and their high-temperature stability, low-temperature cracking resistance, and fatigue performances were tested to be compared with the conventional dense gradation AC-20 asphalt mixture. The results show that the addition of TLA changes the component proportion of virgin asphalt binder, but no new functional groups are produced. The hard asphalt binder modified by TLA has a better rutting resistance, while the fatigue and cracking resistance is lower, compared to both aged and virgin asphalt. The high-modulus design concept of RHMA is a promising way to increase the RAP content in RHMA with acceptable performance. Generally, the RHMA with 50% RAP has similar properties to AC-20. And, when the RAP content reaches 100%, the high- and low-temperature performance and anti-fatigue performance of RHMA are better than AC-20 mixture. Thus, recycling aged asphalt using hard asphalt binder for hot-mixing recycled asphalt mixture to increase the RAP content is feasible.

Mastic asphalt (MA) has been recognized as one of the most deformation-resistant and thus durable materials for bridge pavement. The performance properties of MA are highly dependent on the physical and rheological properties of the binder applied in the MA mixture. To modify the binder properties to obtain the expected performance of the MA mixture, Trinidad Lake Asphalt (TLA) is often applied. In this study, the TLA-modified binders to be used in mastic asphalt bridge pavement systems were evaluated to develop the optimum material combination using conventional and performance-related testing. Physical and rheological tests were carried out on TLA-modified binders with the different modifier content in the range of 10–50% on a weight basis. The tests revealed that the TLA modifier addition to the 35/50 base bitumen should be close to the value of 20%. Higher concentrations of TLA may make the binder very stiff and could induce low-temperature cracks in mastic asphalt.