Search

This review is focused on the research, innovation and technological breakthroughs on marine invertebrate collagens and their applications. The findings reveal that research dates back to the 1970s, and after a period of reduced activity, interest in collagens from several marine invertebrate groups was renewed around 2008, likely driven by the increased commercial interest in these biomolecules of marine origin. Research and development are predominantly reported from China and Japan, highlighting significant research interest in cnidarians (jellyfish), echinoderms (sea cucumbers, sea urchins and starfish), molluscs (squid and cuttlefish) and sponges. Co-word analysis of the literature highlights applications in regenerative medicine, the properties of hydrolysates, and biology and biochemistry studies. Innovation and the technological landscape, however, focus on fewer taxonomic groups, possibly reflecting the challenge of sustainably sourcing raw materials, with a higher number of patents coming from Asia. Globally, jellyfish collagen is the most prominent marine invertebrate source, while Asia also emphasizes the use of collagens derived from molluscs and sea cucumbers. Europe, despite fewer patents, explores a broader range of taxonomic groups. Globally, key applications registered are mostly in medical, dental and toiletry areas, with peptide preparations spanning multiple animal groups. The food domain is notably relevant for molluscs and sea cucumbers. Market trends show a strong presence of cosmetic and supplement products, aligning with market reports that predict a growing demand for marine collagens in cosmetics and personalized nutrition, particularly in targeted health supplements.

Diseases transmitted by vectors such as Aedes aegypti and Culex quinquefasciatus (Diptera: Culicidae) have been responsible for endemics and epidemics in several countries, causing irreparable damage to human health. For this reason, vector control is one of the main strategies to prevent the contamination and dissemination of these etiological agents. In this study, the essential oil (EO) of Ocimum basilicum was obtained by hydrodistillation, and the compounds were identified by GC/MS. A nanoemulsion was obtained through a low-energy input method and evaluated by photon correlation spectroscopy. Bioassays were performed against 4th instar larvae of A. aegypti and C. quinquefasciatus. Furthermore, additional in silico studies of biological activity prediction and molecular docking for the acetylcholinesterase enzyme and juvenile hormone protein targets were performed with the 53 identified compounds of the EO. The major compounds identified in greater quantity were linalool (32.66%) and anethole (32.48%). The obtained nanoemulsion had an average size diameter between 244.6 and 280.4 nm and a polydispersity index below 0.250 during the entire storage period. The nanoemulsion was tested at concentrations of 10, 20, 30, 40, and 50 mg/L and the following activity values were observed: LC50 = 42.15 mg/L and 40.94 mg/L and LC90 = 50.35 mg/L and 48.87 mg/L for A. aegypti (24 h and 48 h); LC50 = 39.64 mg/L and 38.08 mg/L and LC90 = 52.58 mg/L and 54.26 mg/L for C. quinquefasciatus (24 h and 48 h). The in silico results showed better activity values for linalool, anethole, carvone, α-selinene, eugenol, and limonene. The α-selinene compound showed the best binding affinity with the insect acetylcholinesterase enzyme (−9.1 Kcal) in molecular docking, showing the importance of antagonist compounds in elucidating the mechanism of action for the investigated targets. Thus, the studied nanoemulsion was considered active against the tested species, becoming a potential alternative as an ecological bioinsecticide due to bioactivity and simplicity of formulation.

Bio-oils produced from three different biomass sources, namely cork, pinewood, and olive stones, are evaluated concerning their suitability and prospects of including their electrochemical transformations in a biorefinery scenario for the production of added-value compounds. Different types and concentrations of electrolytes (e.g., H2SO4, KOH) are added to the bio-oils to increase the samples’ initially low ionic conductivity. The samples prepared by mixing bio-oil with 2 M KOH aqueous solution (50 vol.%) lead to a stable and homogeneous bio-oil alkaline emulsion suitable for electrochemical studies. The bio-oil samples are characterized by physicochemical methods (e.g., density, viscosity, conductivity), followed by analyzing their electrochemical behavior by voltammetric and chronoamperometric studies. The organics electrooxidation and the hydrogen evolution reaction in the bio-oils are assessed using Pt electrodes. Single- and two-compartment cell laboratory bio-oil electrolyzers are assembled using nickel plate electrodes. Electrolysis is carried out at 2.5 V for 24 h. Attenuated Total Reflection-Fourier-Transform Infrared Spectroscopy and Mass Spectrometry are applied to identify possible changes in the bio-oil samples’ chemical structure during the electrolysis experiments. Comparing the analyses of the bio-oil samples subjected to electrolysis with the blank samples demonstrates that bulk electrolysis significantly changes the bio-oil composition. The bio-oil obtained from cork biomass shows the most promising results, but further studies are required to understand the nature of the actual changes.

A comprehensive investigation regarding the hygrothermal behavior of a constructive solution containing phase change materials (PCMs) was performed on a full-scale test cell, divided into two similar compartments. This involved hygrothermal monitoring (indoor air temperature) of the two compartments, in which one had PCM incorporated into the floor mortar. The main goal of this research was to investigate the potential of this kind of solution for overheating mitigation. The numerical study was conducted using EnergyPlus® software (version 9.0), exploring different natural ventilation flow rates to gauge the novel solution’s potential to reduce overheating rates. The results from the monitoring studies revealed prolonged periods of thermal discomfort in both test cells, particularly overheating. However, it was proven that the PCM application in one of the test cells led to a reduction of almost 10 °C in the maximum peak of air temperature. In the simulation analysis, the increase in the ventilation rate led to a linear decrease in the overheating hours of up to one renovation per hour, and then the reductions were attenuated.

Mosquitoes are one of the main vectors of many important diseases and their degree of resistance to chemical insecticides has increased. Nowadays, it has become crucial to identify novel plant larvicides with an eco-friendly impact. The components of essential oils from Croton linearis Jacq. (EO-Cl), Lantana involucrata L. (EO-Li), Ocimum sanctum var. cubensis M. Gómez. (EO-Os), and Zanthoxylum pistaciifolium Griseb. (syn. Zanthoxylum flavum subsp. pistaciifolium (Griseb.) Reynel (EO-Zp) were determined using gas chromatography-mass spectrometry (GC–MS) analysis. Larvicidal and adulticidal bioassays against Aedes aegypti, Anopheles albitarsis and Culex quinquefasciatus, were performed according to the World Health Organization standard methods. A high diversity of compounds was identified in the four oils, with a total of 152 compounds (33–70 components). EO-Cl, EO-Li, and EO-Os were classified as active against both insect forms, larvae and adults. Lantana involucrata showed the best results, with LC50 values from 33.8 to 41.7 mg/L. In most of the cases, it was not possible to associate the main compounds with the measured activity, supporting the hypothesis about probable synergistic interactions among major and minor compounds. The results indicate EO-Cl, EO-Os, and EO-Li as good eco-friendly insecticides with potential.

Assessments of the water quality in coastal zones often rely on indirect indicators from contributing river inputs and the neighbouring ocean. Using a novel combination of distance accumulation cost methods and an ocean-colour product derived from SENTINEL-3 data, we developed a probabilistic method for the assessment of dissolved inorganic nitrogen (DIN) in Liverpool Bay (UK) for the period from 2017 to 2020. Using our approach, we showed the annual and monthly likelihood of DIN exposure from its 12 major contributory rivers. Furthermore, we generated monthly risk maps showing the probability of DIN exposure from all rivers, which revealed a seasonal variation of extent and location around the bay. The highest likelihood of high DIN exposure throughout the year was in the estuarine regions of the Dee, Mersey, and Ribble, along with near-shore areas along the north Wales coast and around the mouth of the rivers Mersey and Ribble. There were seasonal changes in the risk of DIN exposure, and this risk remained high all year for the Mersey and Dee estuary regions. In contrast, for the mouth and near the coastal areas of the Ribble, the DIN exposure decreased in spring, remained low during the summer and early autumn, before displaying an increase during winter. Our approach offers the ability to assess the water quality within coastal zones without the need of complex hydrodynamic models, whilst still having the potential to apportion nutrient exposure to specific riverine inputs. This information can help to prioritise how direct mitigation strategies can be applied to specific river catchments, focusing the limited resources for coastal zone and river basin management.

The wide occurrence of resistance to Cry1A and Cry2A insecticidal toxins from Bacillus thuringiensis (Bt) in the corn earworm/bollworm Helicoverpa zea (Boddie) leaves the Vip3A toxin produced during the vegetative stage of Bt as the only fully active toxin expressed in transgenic crops to control H. zea in the U.S.A. During 2021, the first unexpected survival of H. zea and injury (UXI) on a maize hybrid expressing Cry1A.105, Cry2Ab2, and Vip3Aa in Louisiana, U.S.A. were observed in two sentinel plots used for resistance monitoring. A follow-up intensive investigation was conducted with two H. zea populations established from larvae collected from the two UXI plots. The main goal of this study was to reveal if the unexpected damage was due to resistance development in the insect to the Bt toxins expressed in the maize hybrid. Diet-overlay bioassays showed that the two populations were highly resistant to Cry1A.105, moderately resistant to Cry2Ab2, but still highly susceptible to Vip3Aa when compared to a reference susceptible strain. In 10 d assays with detached ears, the larvae of the two UXI populations exhibited survival on ears expressing only Cry toxins but presented near 100% mortality on maize hybrids containing both cry and vip3A transgenes. Multiple field trials over three years demonstrated that natural H. zea populations in Louisiana were highly resistant to maize expressing only Cry toxins but remained susceptible to all tested hybrids containing cry and vip3A genes. Altogether, the results of this study suggest that the observed UXIs in Louisiana were associated with a resistance to Cry toxins but were not due to a resistance to Vip3A. The possible causes of the UXIs are discussed. The results generated and procedures adopted in this study help in determining thresholds for defining UXIs, assessing resistance risks, and documenting field resistance.

Due to the lack of a general drought definition, water users and managers have developed and used different indices. Many studies using drought indices have been made so as to detect drought events or just to compare their results and assess their advantages and disadvantages. In Portugal, these studies have been done for common drought indices; however, an integrated evaluation and comparison using recent data is needed. Therefore, this study is intended to give an updated overview of the behaviour of the proposed indices. This study proposes the usage of PDSI, scPDSI, SPI and SPEI. With the exception of the PDSI, all indices have been calculated through R packages. The results for the studied regions in mainland Portugal suggest that the drought situations are, in general, most significant and frequent than the wet periods. From our results, we can conclude that the SPI model is more sensitive to extreme drought events and can detect them earlier. The PDSI, scPDSI and SPEI are more reliable for drought monitorization at medium and long spells, which might represent the environmental interactions more closely to the reality. Also, the scPDSI tends to reduce the importance of short period recovering. It is then advisable that impact and scientifical studies consider all of these indices or at least some of them to have a broader and complete understanding of the drought situations to be studied.

Adoption, use, and diffusion of Information Technology (IT) applications, together with their widespread success, are among the most popular topics in Information Systems (IS) research. However, the impact of the acquired understanding of those phenomena on IS practice is not discernible. In fact, IT adoption, use, and diffusion are subjects scarcely mentioned in what concerns the practices of IT/IS professionals. This article addresses the question of IT/IS practitioners’ awareness of models and theories regarding the adoption, use, and diffusion of IT applications and their success. It describes two surveys of IT/IS project managers that look into their knowledge on a selected set of models/theories widely addressed in IS research. The results show that these project managers are not aware of IT adoption, use, and diffusion models/theories. The article ends with a discussion that attempts to find justifications for that evidence and stresses out the need for further research focused on translating the extant theoretical models into actionable knowledge.

Additive manufacturing (AM) has become a viable option for producing structural parts with a high degree of geometrical complexity. Despite such trend, accurate material properties, under diversified testing conditions, are scarce or practically non-existent for the most recent additively manufactured (AMed) materials. Such data gap may compromise component performance design, through numerical simulation, especially enhanced by topological optimisation of AMed components. This study aimed at a comprehensive characterisation of laser powder bed fusion as-built 18Ni300 maraging steel and its systematic comparison to the conventional counterpart. Multiaxial double-notched specimens demonstrated a successful depiction of both plastic and damage behaviour under different stress states. Tensile specimens with distinct notch configurations were also used for high stress triaxiality range characterisation. This study demonstrates that the multiaxial double-notched specimens constitute a viable option towards the inverse plastic behaviour calibration of high-strength additively manufactured steels in distinct state of stress conditions. AMed maraging steel exhibited higher strength and lower ductility than the conventional material.

Neurodegenerative diseases affect millions of human lives all over the world. The number of afflicted patients is rapidly growing, and disease-modifying agents are urgently needed. Caffeic acid, an important member of the hydroxycinnamic acid family of polyphenols, has considerable neurotrophic effects. We have previously shown how caffeate alkyl ester derivatives significantly promote survival and differentiation in neuronal cells. In this study, the mechanisms by which these ester derivatives exert their neurotrophic effects are examined. A series of eight caffeic acid esters with different alkyl chain lengths, ranging from methyl (CAF1) to dodecyl esters (CAF8), were synthesized and studied for their influence on neurotrophic signaling pathways. Caffeate esters did not induce tropomyosin-receptor kinase A (TrkA) phosphorylation, which was assessed by immunoblotting up to a concentration of 25 µM. NIH/3T3 cells overexpressing TrkA were generated to further examine phosphorylation of this receptor tyrosine kinase. None of the esters induced TrkA phosphorylation in these cells either. Assessment of the effect of caffeate derivatives on downstream neurotrophic pathways by immunoblotting showed that the most potent esters, decyl caffeate (CAF7) and dodecyl caffeate (CAF8) caused extracellular signal-regulated kinase (ERK1/2) and Akt serine threonine kinase phosphorylation in PC12 cells at 5 and 25 µM concentrations. In conclusion, this study shows that caffeate esters exert their neurotrophic action by modulation of ERK1/2 and Akt signaling pathways in neuronal cells, and further demonstrates the potential therapeutic implications of these derivatives for neurodegenerative diseases.