Search

Background/Objectives: ACR/EULAR has recently developed new classification criteria for antiphospholipid syndrome (APS). The present study aims to analyze the impact of these new 2023 ACR/EULAR classification criteria in a cohort of pregnant women with primary APS. Methods: Retrospective cohort study of 93 consecutive pregnant women attending the Autoimmune Diseases Pregnancy Clinic, a multidisciplinary unit of a tertiary care teaching hospital, between 2005 and 2023. All of them fulfilled the Sydney classification criteria for APS. Women diagnosed with rheumatic autoimmune diseases other than APS were excluded. Results: Twenty-four out of ninety-three patients (25.8%) met the 2023 ACR/EULAR criteria for APS. Patients who met the new classification criteria were very similar to those who did not, except for being younger (p < 0.001), and had a lower number of clinical pregnancies (p = 0.004). The obstetric domain was clearly underrepresented in women who fulfilled the 2023 ACR/EULAR criteria (p < 0.001). Patients meeting the new classification criteria were primarily characterized by preterm births before 34 weeks due to severe placentation disorders (p = 0.004). Women with early and late fetal loss were significantly underrepresented (p < 0.0001 and 0.03, respectively). Nearly half of these patients had thrombocytopenia (p < 0.001). Serologically, these patients showed a higher frequency of persistent lupus anticoagulant (p = 0.02) and a lower frequency of IgM isotype antiphospholipid antibodies (p = 0.05). Conclusions: Almost three-quarters of the patients included in the study did not meet the 2023 ACR/EULAR criteria. Most patients who could not be classified according to these new classification criteria were those with early and/or late fetal deaths, as well as patients carrying only IgM aCL/AB2GPI antibodies. The high specificity of the 2023 ACR/EULAR criteria, restricted to severe placentation disorders, may leave the majority of patients with obstetric APS out of the new classification criteria.

In this research, we aimed to determine the antioxidant activity of an atomized extract of Cnidoscolus diacanthus (Pax & K. Hoffm.) J.F. Macbr., known in Peru as “huanarpo hembra”, and its effect on sex hormone levels. Its phytochemical profile was determined using liquid chromatography–mass spectrometry (LC–MS), while its total phenol content (TPC) and total flavonoids (TFs) were determined using the Folin–Ciocalteu method and the aluminum chloride method. Its antioxidant activity was determined using 2,2-diphenyl-1-picrylhydrazyl (DPPH), the radical 2,2-azino-bis-3-ethylbenzthiazolin-6 sulfonic acid (ABTS), and ferric-reducing antioxidant power (FRAP). The biological activity of C. diacanthus and its effect on sexual hormones were determined in Holtzman rats of both sexes. Phytochemical analysis revealed the presence of flavonoids and phenolic compounds in its leaves and stems, mainly rutin, quercetin, chlorogenic acid, and genistein. However, the stem extract contained higher total phenol (464.38 ± 4.40 GAE/g) and flavonoid (369.17 ± 3.16 mg QE/g of extract) contents than the leaf extract (212.38 ± 3.19 mg GAE/g and 121.49 ± 2.69 mg QE/g). For DPPH, ABTS, and FRAP, the Trolox-equivalent antioxidant capacity (TEAC) was 597.20 ± 5.40 µmol/g, 452.67 ± 5.76 µmol/g, and 535.91 ± 1.56 µmol/g, respectively, for the stems, while for the leaves, it was 462.39 ± 3.99 µmol/g, 202.32 ± 5.20 µmol/g, and 198.13 ± 1.44 µmol/g, respectively. In terms of the values for hormonal levels, at a dose of 100 mg/kg of the extract, testosterone levels of 1.430 ng/mL (with the leaf extract) and 1.433 ng/mL (with the stem extract), respectively, were found in the male rats. Regarding estradiol levels, in the female rats, these were 10.425 ng/mL (leaf extract) and 8.775 ng/mL (stem extract), while their levels of luteinizing hormone were 0.320 mIU/mL (leaf extract) and 0.273 mIU/mL (stem extract). For the follicle-stimulating hormone, levels of 0.858 mIU/mL (leaf extract) and 0.840 mIU/mL (stem extract) were found in the female rats, and levels of 0.220 mIU/mL (leaf extract) and 0.200 mIU/mL (stem extract) were found in the male rats. It is concluded that the C. diacanthus stem extract had a greater antioxidant capacity than the leaf extract, while both extracts had a superior effect on the sex hormone levels in the female rats compared to the male rats.

The Latin American Giant Observatory (LAGO) is a ground-based extended cosmic rays observatory designed to study transient astrophysical events, the role of the atmosphere on the formation of secondary particles, and space-weather-related phenomena. With the use of a network of Water Cherenkov Detectors (WCDs), LAGO measures the secondary particle flux, a consequence of the interaction of astroparticles impinging on the atmosphere of Earth. This flux can be grouped into three distinct basic constituents: electromagnetic, muonic, and hadronic components. When a particle enters a WCD, it generates a measurable signal characterized by unique features correlating to the particle’s type and the detector’s specific response. The resulting charge histograms from these signals provide valuable insights into the flux of primary astroparticles and their key characteristics. However, these data are insufficient to effectively distinguish between the contributions of different secondary particles. In this work, we extend our previous research by using detailed simulations of the expected atmospheric response to the primary flux and the corresponding response of our WCDs to atmospheric radiation. This dataset, which was created through the combination of the outputs of the ARTI and Meiga simulation frameworks, simulated the expected WCD signals produced by the flux of secondary particles during one day at the LAGO site in Bariloche, Argentina, situated at 865 m above sea level. This was achieved by analyzing the real-time magnetospheric and local atmospheric conditions for February and March of 2012, where the resultant atmospheric secondary-particle flux was integrated into a specific Meiga application featuring a comprehensive Geant4 model of the WCD at this LAGO location. The final output was modified for effective integration into our machine-learning pipeline. With an implementation of Ordering Points to Identify the Clustering Structure (OPTICS), a density-based clustering algorithm used to identify patterns in data collected by a single WCD, we have further refined our approach to implement a method that categorizes particle groups using advanced unsupervised machine learning techniques. This allowed for the differentiation among particle types and utilized the detector’s nuanced response to each, thus pinpointing the principal contributors within each group. Our analysis has demonstrated that applying our enhanced methodology can accurately identify the originating particles with a high degree of confidence on a single-pulse basis, highlighting its precision and reliability. These promising results suggest the feasibility of future implementations of machine-leaning-based models throughout LAGO’s distributed detection network and other astroparticle observatories for semi-automated, onboard and real-time data analysis.

The development of reuse processes for plant by-products for both animal and human food offers numerous possibilities for quality-of-life improvements that align with a circular economy model. For this reason, we divided this study into two experiments. First, we designed a combined treatment consisting of laccase, ultrasound, and ascorbic acid to hydrolyze rice straw plant fibers and used the resulting feed as the basis for T. molitor diets. Second, we formulated diets with different inclusion levels (0%, 25%, 50%, 75%, and 100%) of rice straw and treated rice straw to assess their impact on larvae growth and diet digestibility. For each treatment, six replicates were employed: four for the growth–performance–digestibility trial and two for complementary uric acid determination tests. The combined laccase enzyme, ultrasound, and ascorbic acid treatment hydrolyzed 13.2% of the vegetable fibers. The diets containing treated rice straw resulted in higher larvae weight and a better feed conversion ratio; however, reaching 100% by-product inclusion values led to similar results between both diets. In conclusion, these treatments improve the potential of low-nutritional-value vegetable by-products as part of a T. molitor diet, opening the possibility of new methodologies for the use of recalcitrant vegetable by-products for insect rearing.

Background: Hepatitis C virus (HCV) infection remains a global health challenge, with millions of people affected annually. Current diagnostic methods, reliant on antibody screening and viral RNA detection, are complex, costly, and often inaccessible, particularly in resource-limited settings. Aim: Development of a lateral flow immunochromatography-based assay for detecting the highly conserved hepatitis C core antigen (HCVcAg). Methods: The assay relies on the interaction of four highly specific and cross-reactive monoclonal antibodies with recombinant HCVcAg from five different genotypes in a double antibody sandwich format. Latex and colloidal gold were evaluated as detector nanoparticles. Results: Extensive evaluation of 32 antibody combinations led to identifying the most sensitive antibody pairs. The chosen assay, named LN17, demonstrated a target sensitivity of 10 ng/strip, with potential clinical implications for detecting HCV. Furthermore, the study examined matrix effects in serum samples, providing valuable insights for future clinical application. Conclusions: The developed assay holds promise as a rapid, cost-effective, and user-friendly tool to enhance accessibility to hepatitis C screening, especially in high-risk populations and resource-limited environments.

Copper leaching presents an environmentally friendly alternative to traditional sulfide ore processing methods. This study investigates an efficient leaching process for copper concentrate, utilizing a solution of sulfuric acid (H2SO4) and potassium iodide (KI) in a chloride medium (NaCl), enhanced by hydrogen peroxide (H2O2) at room temperature. A significant aspect of this research was optimizing the KI concentration to minimize iodide sublimation into iodine gas (I2). Through the experimental design, the optimal dosages of reagents were determined, leading to maximized copper extraction of approximately 27% in 45 min of testing at room temperature. The results showed that it is possible to obtain a suitable pregnant leach solution (PLS) (i.e., in the range of 3 to 8 g/L of Cu) for treatment in available copper solvent extraction (SX) plants with a cost of less than 4.5 USD/t Cu, according to the economic analysis carried out. The results of this study determine the most effective operational conditions for leaching and ensure a suitable PLS for SX plants in a cost-effective and environmentally friendly manner. This approach could significantly contribute to more sustainable practices in the mining and processing of copper ores.

This study compared the transcutaneous target level irradiances from the thoracic to lumbar segments of the interior spinal canal in three cadaver dogs, measured for light at four wavelengths (808 nm, 915 nm, 975 nm, and 1064 nm), common in photobiomodulation therapy (PBMT). Intra-spinal irradiances at nine sites spanning approximately 8 cm in length were measured using a flexible intra-spinal probe under surface application of continuous-wave (CW) light with powers ranging from 0.5 W to 2 W. Surface illumination was applied using an acupuncture treatment head in three modes: non-contact with skin removed, non-contact with skin intact, and contact with skin intact. During surface application, the treatment head was positioned over the spinal canal near the 13th vertebrae (T13, surface site 1), and approximately 4 cm (surface site 5) and 8 cm (surface site 9) caudal to T13. At each position of the treatment head, the light was multiplexed among the four wavelengths at the same power setting. In all three modes of surface application, the target level irradiance at the 1064 nm wavelength was significantly greater than that at the other three wavelengths (p ≤ 0.0017). At a surface irradiance of ~157 mW/cm2, corresponding to 0.5 W light applied with the treatment head directly in contact with the skin, the intra-spinal irradiance at 1064 nm reached 0.137 ± 0.095 mW/cm2. Obtaining a dosage of PBMT-associative wavelengths of this magnitude at the level of the spinal canal may guide focused research into the transcutaneous applicability of PBMT for spinal cord injuries.

Buildings are complex structures composed of heterogeneous elements; these require building management systems (BMSs) to dynamically adapt them to occupants’ needs and leverage building resources. The fast growth of information and communication technologies (ICTs) has transformed the BMS field into a multidisciplinary one. Consequently, this has caused several research papers on data-driven solutions to require examination and classification. This paper provides a broad overview of BMS by conducting a systematic literature review (SLR) summarizing current trends in this field. Unlike similar reviews, this SLR provides a rigorous methodology to review current research from a computer science perspective. Therefore, our goal is four-fold: (i) Identify the main topics in the field of building; (ii) Identify the recent data-driven methods; (iii) Understand the BMS’s underlying computing architecture (iv) Understand the features of BMS that contribute to the smartization of buildings. The result synthesizes our findings and provides research directions for further research.

The variability of crop load in Conference pears significantly influences fruit quality and postharvest losses. This study aimed to investigate and implement a novel technique for managing crop load in Conference pear orchards, with a focus on contributing to sustainable orchard management practices. High-russet pear cv. Conference fruit was harvested from trees categorized into two groups based on yield efficiency. A two-way ANOVA was used to test the effects of crop load level and year on yield properties and fruit quality parameters. Results demonstrated that low crop loads exerted a positive influence on fruit quality, resulting in increased fresh-market yield, enhanced fruit-mass parameters, and improved firmness and acidity. Additionally, fruit from low crop load levels exhibited a heightened level of characteristic skin russeting, a desirable attribute that enhances product appeal, compared to fruit from high crop load levels. Thus, crop load management in Conference pear orchards emerged as an effective preharvest organic strategy for mitigating postharvest quality losses during storage, thereby promoting overall orchard sustainability.

Inherited thrombophilia (IT) has been implicated as a potential causal factor of adverse pregnancy outcomes (APOs), including recurrent miscarriage with and without the presence of antiphospholipid syndrome (APS). The aim of this study was to assess the prevalence and impact of IT on fetal–maternal outcomes and thrombotic risk in women within the spectrum of obstetric APS. Three hundred and twenty-eight women with APS-related obstetric morbidity ever pregnant were included. Of these, 74 met the APS classification criteria, 169 were non-criteria (NC)-APS, and 85 were seronegative (SN)-APS. Patients with other autoimmune diseases were excluded. APOs included early pregnancy loss, fetal death, preeclampsia, abruptio placentae, and preterm birth. Successful pregnancy was defined as the achievement of a live newborn. A literature search was also performed. The mean age of the overall group was 33.9 ± 5.3 years, and the patients were followed up for 35 (11–79) months. During the study period, there were 1332 pregnancies. Nearly 14% of the patients had an associated IT. IT patients more frequently received the standard-of-care (SoC) therapy. The presence of IT was not associated with worse maternal–fetal outcomes in patients treated with SoC treatment. Overall, IT patients had a lower frequency of newborns without treatment, especially those without definite APS. In addition, IT did not increase the risk of thrombosis during pregnancy or the postpartum period. A detailed analysis of the literature review identified only four publications related to our study and did not show conclusive evidence of the impact of IT on patients with obstetric APS. The group of women with APS-related obstetric morbidity and IT who did not receive treatment, especially those without definite APS, had a worse prognosis in terms of a live birth. However, with SoC therapy, the prognosis is similar in those patients without IT. The association of IT with APS does not seem to predispose to the development of thrombosis during pregnancy and/or the postpartum period.

Background: To compare photodynamic therapy and the use of probiotics in reducing halitosis assessed through gas chromatography and microbiome analysis. Methods: Participants aged from 18 to 25 years showing sulfide (SH2) ≥ 112 ppb on gas chromatography were selected. They were divided into four treatment groups: Group 1—Tongue Scraping; Group 2—Antimicrobial Photodynamic Therapy (aPDT); Group 3—Probiotics; and Group 4—Antimicrobial Photodynamic Therapy (aPDT) and Probiotics. The halimetry process was performed before, immediately after the treatments, and 7 days, 14 days, and 30 days after the initial collection. The collections for later microbiological analysis were made along with the halimetry for microbiome analysis. Results: Treatment with aPDT or probiotics under these experimental conditions was not able to change the bacteria present in the biofilm of the tongue. Conclusions: More research is needed to know the behavior of the oral microbiome in the presence of halitosis and the effectiveness of new treatments.

Permanent engravings on contact lenses provide information about the manufacturing process and lens positioning when they are placed on the eye. The inspection of their morphological characteristics is important, since they can affect the user’s comfort and deposit adhesion. Therefore, an inverted wavefront holoscope (a lensless microscope based on Gabor’s principle of in-line digital holography) is explored for the characterization of the permanent marks of soft contact lenses. The device, based on an in-line transmission configuration, uses a partially coherent laser source to illuminate the soft contact lens placed in a cuvette filled with a saline solution for lens preservation. Holograms were recorded on a digital sensor and reconstructed by back propagation to the image plane based on the angular spectrum method. In addition, a phase-retrieval algorithm was used to enhance the quality of the recovered images. The instrument was experimentally validated through a calibration process in terms of spatial resolution and thickness estimation, showing values that perfectly agree with those that were theoretically expected. Finally, phase maps of different engravings for three commercial soft contact lenses were successfully reconstructed, validating the inverted wavefront holoscope as a potential instrument for the characterization of the permanent marks of soft contact lenses. To improve the final image quality of reconstructions, the geometry of lenses should be considered to avoid induced aberration effects.

There has been growing interest in the use of numerous plant bioactive compounds (PBCs) in food and nutrition technology due to their properties that promote human health by reducing the risk of various serious diseases [...]

Spray drying of oil-in-water emulsions is a widespread encapsulation technique. The oil droplet size (ODS) significantly impacts encapsulation efficiency and other powder properties. The ODS is commonly set to a specific value during homogenization, assuming that it remains unchanged throughout the process, which is often inaccurate. This study investigated the impact of atomizer geometry and nozzle dimensions on oil droplet breakup during atomization using pressure-swirl atomizers. Subject of the investigation were nozzles that differ in the way the liquid is set in motion, as well as different inlet port and outlet orifice dimensions. The results indicate that nozzle inlet port area may have a significant impact on oil droplet breakup, with x90,3 values of the oil droplet size distribution decreasing from 5.29 to 2.30 µm with a decrease of the inlet area from 2.0 to 0.6 mm. Good scalability of the findings from pilot to industrial-scale was shown using larger nozzles. A simplified theoretical model, aiming to predict the ODS as a function of calculated shear rates, showed reasonable agreement to the experimental data for different atomization pressures with coefficients of determination of up to 0.99. However, it was not able to predict the impact of different nozzle dimensions, most likely due to changes in flow characteristics. These results suggest that the stress history of the oil droplets might have a larger influence than expected. Further studies will need to consider other zones of high stress in addition to the outlet orifice.

This study presents a new optical sensor for tartrazine (TAR) quantification developed using a molecularly imprinted polymer (MIP) as the recognition element, with optical fiber serving as the supporting substrate. The fiber surface was functionalized with 3-(trimethoxysilyl)propyl methacrylate (MPS), and the fiber was coated with MIP using the precipitation polymerization method. The analysis of MIP immobilization on the functionalized optical fiber (FF) was conducted through the use of scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) techniques. Experimental parameters, such as contact time and fiber length, were adjusted in order to obtain the highest sensitive response signal for the functionalized optical fiber (FF-MIP). The fiber sensor, FF-MIP, exhibited a relatively higher response signal for tartrazine compared to other interfering dyes. The rapid and total desorption of the analyte from FF-MIP allowed the immediate reemployment of FF-MIP, which also presented an acceptable repeatability for the reflectance signal. The imprinting factors for the studied dyes were between 0.112 and 0.936 in front of TAR, 1.405, and selectivity factors were between 1.501 and 12.545, confirming the sensor selectivity. The FF-MIP sensor was successfully applied for tartrazine quantification in real water samples, where it yielded satisfactory results comparable to those of the HPLC reference method.

African swine fever (ASF) is a contagious disease of wild boar and domestic pigs notifiable to the World Organisation for Animal Health due to its high socio-economic impact. ASF is caused by the complex ASF virus (ASFV), and it can present different clinical manifestations that can be confused with other diseases; for this reason, laboratory testing is necessary for the proper diagnosis of clinically suspected animals. Despite the efforts put into it over decades, no treatment or safe vaccine is globally available, and disease control is based on early diagnosis and the implementation of strict biosecurity measures. In this context, rapid tests have the potential to accelerate and facilitate the identification of infected animals by giving fast on-site results. In this work, we improved the available point-of-care assays for the diagnosis of the disease by the development of a more specific antigen test and a more sensitive antibody test. This antibody detection test allowed for the earlier detection of infected animals than two commercial indirect ELISAs (statistically significant). Moreover, we developed a combined dual rapid test, unifying, in the same cassette, an antigen detection strip and an antibody detection strip. In this study, we confirmed that this combo approach is a useful tool for implementing rapid tests in the field since it increases the percentage of positive samples detected, even when PCR turns negative, while maintaining a good specificity.

Invasive plants are a serious problem in island ecosystems and are the main cause of the extinction of endemic species. Cuba is located within one of the hotspots of global biodiversity, which, coupled with high endemism and the impacts caused by various disturbances, makes it a region particularly sensitive to potential damage by invasive plants like Dichrostachys cinerea (L.) Wight & Arn. (marabú). However, there is a lack of timely information for monitoring this species, as well as about the land use and land cover (LULC) classes most significantly impacted by this invasion in the last few decades and their spatial distribution. The main objective of this study, carried out in Central Cuba, was to detect and monitor the spread of marabú over a 28-year period. The land covers for the years 1994 and 2022 were classified using Landsat 5 TM and 8 OLI images with three different classification algorithms: maximum likelihood (ML), support vector machine (SVM), and random forest (RF). The results obtained showed that RF outperformed the other classifiers, achieving AUC values of 0.92 for 1994 and 0.97 for 2022. It was confirmed that the area covered by marabú increased by 29,555 ha, from 61,977.59 ha in 1994 to 91,533.47 ha in 2022 (by around 48%), affecting key land covers like woodlands, mangroves, and rainfed croplands. These changes in the area covered by marabú were associated, principally, with changes in land uses and tenure and not with other factors, such as rainfall or relief in the province. The use of other free multispectral imagery, such as Sentinel 2 data, with higher temporal and spatial resolution, could further refine the model’s accuracy.

The 21st century has seen the launch of new space-borne sensors based on LiDAR (light detection and ranging) technology developed in the second half of the 20th century. Nowadays, these sensors offer novel opportunities for mapping terrain and canopy heights and estimating aboveground biomass (AGB) across local to regional scales. This study aims to analyze the scientific impact of these sensors on large-scale forest mapping to retrieve 3D canopy information, monitor forest degradation, estimate AGB, and model key ecosystem variables such as primary productivity and biodiversity. A worldwide bibliometric analysis of this topic was carried out based on up to 412 publications indexed in the Scopus database during the period 2004–2022. The results showed that the number of published documents increased exponentially in the last five years, coinciding with the commissioning of two new LiDAR space missions: Ice, Cloud, and Land Elevation Satellite (ICESat-2) and Global Ecosystem Dynamics Investigation (GEDI). These missions have been providing data since 2018 and 2019, respectively. The journal that demonstrated the highest productivity in this field was “Remote Sensing” and among the leading contributors, the top five countries in terms of publications were the USA, China, the UK, France, and Germany. The upward trajectory in the number of publications categorizes this subject as a highly trending research topic, particularly in the context of improving forest resource management and participating in global climate treaty frameworks that require monitoring and reporting on forest carbon stocks. In this context, the integration of space-borne data, including imagery, SAR, and LiDAR, is anticipated to steer the trajectory of this research in the upcoming years.

The study of the multiple processes involved in learning how to read can contribute towards the early detection of good and bad readers. However, it is necessary to take into consideration different biopsychosocial risk factors (pre- and perigestational, neonatal, medical, developmental and family-related) that may have a significant impact on neurodevelopment, producing atypical cognitive development that could lead to the presence of reading difficulties. The objective of this study was to identify the main psycholinguistic abilities involved in the early reading performance and analyse their relationship to biopsychosocial risk factors. A total of 110 subjects between the ages of 4 and 7 years old and enrolled in state-run schools in Spain participated in the study. Significant correlations were found between different psycholinguistic abilities and certain biopsychosocial risk factors (having had hyperbilirubinemia, having obtained a score lower than 9 on the Apgar test, having had language problems or a sibling with dyslexia). This relationship should be taken into account in the study of learning difficulties as a potential indicator to predict later reading development and even the presence of developmental dyslexia.

Control of canine infections with Leishmania infantum (L. infantum), a major zoonotic disease in Brazil and southern Europe, is becoming increasingly important due to its close proximity to humans, the increasing import of dogs from endemic regions and the impact of climate change on vector spreading. Simple, rapid and reliable diagnostic tests are therefore needed to detect infected dogs. Here, we re-evaluated different serological methods for the diagnosis of canine leishmaniosis (CanL) in Croatia and Brazil. The diagnostic performance of the indirect fluorescent antibody test (IFAT) and the VetLine® Leishmania ELISA (GSD Frankfurt, Germany) was compared with three rKLi8.3-based diagnostic test systems, the rKLi8.3 ELISA (GSD Frankfurt, Germany), the INgezim® Leishma CROM (GSD Madrid, Spain) lateral flow test (LFT) and the VetBlot® Leishmania LineBlot (GSD Frankfurt, Germany). CanL symptomatic dogs were efficiently diagnosed by all tests, except the VetLine® Leishmania ELISA, which is based on whole Leishmania antigens. The advantage of rKLi8.3 was also observed in oligo- and asymptomatic dogs from Brazil and Croatia, although with reduced diagnostic efficiency compared to symptomatic dogs. Similar to IFAT and rKLi8.3 ELISA, the LFT did not cross-react with other common canine pathogens; it showed very high specificity for healthy dogs from endemic regions in both countries and did not react with healthy, vaccinated dogs in Brazil. In conclusion, serodiagnostic tests based on the rKLi8.3 antigens are superior to whole parasite antigens, and the LFT has the advantage of providing a laboratory-independent, rapid and specific diagnosis of CanL.

The health crisis triggered by COVID-19 has exerted a profound influence on both conventional communication methods and the manifestations of interaction within the virtual sphere. Gradually, studies on digital communication have taken on an increasingly prominent role in various social science disciplines that address determinants such as the crisis of misinformation or digital interaction in contemporary societies. This study aims to analyze the key research topics that sociology has addressed in relation to the pandemic, along with the level of innovation in the utilization of digital sources and analytical methodology. The analysis is grounded in the hypothesis that the effects of the pandemic have led the discipline of sociology to reassess and more fully integrate studies on digital communication. On this premise, a systematic review of studies sourced from the Web of Science (WoS) and Scopus databases was executed. Innovative computational methodologies were employed for the categorization of articles and the elucidation of principal research topics. Furthermore, this research scrutinized the principal digital platforms utilized in these investigations and assessed the extent of methodological innovation applied to data analysis. The outcomes unveiled a pronounced ascendancy in the prominence of communication studies during the pandemic. Nevertheless, it is noteworthy that the utilization of digital data sources in research remains surprisingly limited. This observation highlights a potential avenue for further exploration within the domain of sociological research, promising a more profound and contemporaneous comprehension of social phenomena amid times of crisis.

The aim of the study was to evaluate the impact of probiotics obtained from an agroindustrial waste substrate fermented with lactic acid bacteria and/or yeasts on the health and changes in the microbiota of the digestive tract of guinea pigs. Eighty male guinea pigs, Kuri breed, 30 days old and 250 g live weight, were randomly selected and divided into four groups of 20 animals each: T0, control; T1, Lactobacillus acidophilus and L. bulgaricus; T2, Saccharomyces cerevisiae and Kluyveromyces fragilis; and T3. L. acidophilus, L. bulgariccus, S. cerevisiae and K. fragilis. T1, T2 and T3 contained molasses-vinasse substrate in their base, the dose administered was 1.00 mL/animal orally every 3 days. The indicators evaluated were weight gain, occurrence of diarrhea and mortality, macroscopic lesions in the digestive tract organs and changes in the microbiota of the stomach, caecum, small and large intestine. Treatments T1, T2 and T3 improved weight gain (p < 0.05) and reduced the presence of guinea pigs with diarrhea (p < 0.05) and there was no mortality; animals in the control group presented a greater amount (p < 0.05) of macroscopic lesions in the digestive tract organs; in the T1, T2 and T3 groups there was an improvement in the natural microbiota. It is concluded that the inclusion of a microbial additive in young guinea pigs improves intestinal health and consequently improves weight gain, reduces diarrhea and deaths and normalizes the natural microbiota of the gastrointestinal tract.

According to the Codex Alimentarius, a food additive is any substance that is incorporated into a food solely for technological or organoleptic purposes during the production of that food. Food additives can be of synthetic or natural origin. Several scientific evidence (in vitro studies and epidemiological studies like the controversial Southampton study published in 2007) have pointed out that several synthetic additives may lead to health issues for consumers. In that sense, the actual consumer searches for “Clean Label” foods with ingredient lists clean of coded additives, which are rejected by the actual consumer, highlighting the need to distinguish synthetic and natural codded additives from the ingredient lists. However, this natural approach must focus on an integrated vision of the replacement of chemical substances from the food ingredients, food contact materials (packaging), and their application on the final product. Hence, natural plant alternatives are hereby presented, analyzing their potential success in replacing common synthetic emulsifiers, colorants, flavorings, inhibitors of quality-degrading enzymes, antimicrobials, and antioxidants. In addition, the need for a complete absence of chemical additive migration to the food is approached through the use of plant-origin bioactive compounds (e.g., plant essential oils) incorporated in active packaging.

Water scarcity and quality deterioration, driven by rapid population growth, urbanization, and intensive industrial and agricultural activities, emphasize the urgency for effective water management. This study aims to develop a model to comprehensively monitor various water quality parameters (WQP) and evaluate the feasibility of implementing this model in real-world scenarios, addressing the limitations of conventional in-situ sampling. Thus, a comprehensive model for monitoring WQP was developed using a 38-year dataset of Landsat imagery and in-situ data from the Water Information System of Europe (WISE), employing Back-Propagated Artificial Neural Networks (ANN). Correlation analyses revealed strong associations between remote sensing data and various WQPs, including Total Suspended Solids (TSS), chlorophyll-a (chl-a), Dissolved Oxygen (DO), Total Nitrogen (TN), and Total Phosphorus (TP). Optimal band combinations for each parameter were identified, enhancing the accuracy of the WQP estimation. The ANN-based model exhibited very high accuracy, particularly for chl-a and TSS (R2 > 0.90, NRMSE < 0.79%), surpassing previous studies. The independent validation showcased accurate classification for TSS and TN, while DO estimation faced challenges during high variation periods, highlighting the complexity of DO dynamics. The usability of the developed model was successfully tested in a real-case scenario, proving to be an operational tool for water management. Future research avenues include exploring additional data sources for improved model accuracy, potentially enhancing predictions and expanding the model’s utility in diverse environmental contexts.

Gold nanorods (AuNRs) have attracted attention in the field of biomedicine, particularly for their potential as photothermal agents capable of killing tumor cells by photothermic ablation. In this study, the synthesis of novel AuNRs stabilized with thiolated pectin (AuNR@SH-PEC) is reported. To achieve this, thiolated pectin (SH-PEC) was obtained by chemically binding cysteamine motifs to the pectin backbone. The success of the reaction was ascertained using FTIR-ATR. Subsequently, the SH-PEC was used to coat and stabilize the surface of AuNRs (AuNR@SH-PEC). In this context, different concentrations of SH-PEC (0.25, 0.50, 1.0, 2.0, 4.0, and 8.0 mg/mL) were added to 0.50 mL of AuNRs suspended in CTAB, aiming to determine the experimental conditions under which AuNR@SH-PEC maintains stability. The results show that SH-PEC effectively replaced the CTAB adsorbed on the surface of AuNRs, enhancing the stability of AuNRs without affecting their optical properties. Additionally, scanning electron and atomic force microscopy confirmed that SH-PEC is adsorbed into the surface of the AuNRs. Importantly, the dimension size (60 × 15 nm) and the aspect ratio (4:1) remained consistent with those of AuNRs stabilized with CTAB. Then, the photothermal properties of gold nanorods were evaluated by irradiating the aqueous suspension of AuNR@SH-PEC with a CW laser (808 nm, 1 W). These results showed that photothermal conversion efficiency is similar to the photothermal conversion observed for AuNR-CTAB. Lastly, the cell viability assays confirmed that the SH-PEC coating enhanced the biocompatibility of AuNR@SH-PEC. Most important, the viability cell assays subjected to laser irradiation in the presence of AuNR@SH-PEC showed a decrease in the cell viability relative to the non-irradiated cells. These results suggest that AuNRs stabilized with thiolated pectin can potentially be exploited in the implementation of photothermal therapy.

Marble is one of the materials most susceptible to copper leaching, resulting in easily identifiable turquoise stains on the marble. This problem is particularly relevant when we are talking about marble structures of heritage value. For this reason, conservators look for cleaning materials that are specific to the structure to be treated without damaging the original surface. Materials such as agar have been studied for a long time. Agar creates a controlled water release system that adapts to the needs of conservators who seek the greatest possible cleanliness without damaging the material to be treated. To improve the cleaning, chelating agents such as EDTA are added to the agar composition. However, the microbiological growth and the damage it produces to the original material are disadvantages to take into account. In order to solve these problems, other natural materials with cleaning potential such as kudzu and konjac gels were studied in combination with other chelating agents such as citrate, oxalate, and gluconic acid. For the characterization and evaluation of copper cleaning, various analytical techniques were used, including Raman spectroscopy, colorimetry, X-ray fluorescence (XRF), and inductively coupled plasma mass spectrometry (ICP-MS). In this study, both konjac and kudzu emerged as promising alternatives to agar, revealing distinctive features such as simplified preparation methods and inherent antimicrobial properties. The EDTA chelator was found to be the most harmful for marble surfaces, as it extracted a greater amount of calcium from the marble during application of the gels doped with it. Citrate and gluconic acid have been identified as a promising substitute to prepare doped gels for the removal of copper stains. These compounds exhibit comparable or potentially superior cleaning capabilities than EDTA, with no negative side effects.

Scientific evidence increasingly supports the strong link between diet and health, acknowledging that a well-balanced diet plays a crucial role in preventing chronic diseases such as obesity, diabetes, cardiovascular issues, and certain types of cancer. This perspective opens the door to developing precision diets, particularly tailored for individuals at risk of developing cancer. It encompasses a vast research area and involves the study of an expanding array of compounds with multilevel “omics” compositions, including genomics, transcriptomics, proteomics, epigenomics, miRNomics, and metabolomics. We review here the components of the Southern European Atlantic Diet (SEAD) from both a chemical and pharmacological standpoint. The information sources consulted, complemented by crystallographic data from the Protein Data Bank, establish a direct link between the SEAD and its anticancer properties. The data collected strongly suggest that SEAD offers an exceptionally healthy profile, particularly due to the presence of beneficial biomolecules in its foods. The inclusion of olive oil and paprika in this diet provides numerous health benefits, and scientific evidence supports the anticancer properties of dietary supplements with biomolecules sourced from vegetables of the brassica genus. Nonetheless, further research is warranted in this field to gain deeper insights into the potential benefits of the SEAD’s bioactive compounds against cancer.

Humanity is facing a vast prevalence of neurodegenerative diseases, with Alzheimer’s disease (AD) being the most dominant, without efficacious drugs, and with only a few therapeutic targets identified. In this scenario, we aim to find molecular entities that modulate imidazoline I2 receptors (I2-IRs) that have been pointed out as relevant targets in AD. In this work, we explored structural modifications of well-established I2-IR ligands, giving access to derivatives with an imidazole-linked heterocycle as a common key feature. We report the synthesis, the affinity in human I2-IRs, the brain penetration capabilities, the in silico ADMET studies, and the three-dimensional quantitative structure-activity relationship (3D-QSAR) studies of this new bunch of I2-IR ligands. Selected compounds showed neuroprotective properties and beneficial effects in an in vitro model of Parkinson’s disease, rescued the human dopaminergic cell line SH-SY5Y from death after treatment with 6-hydroxydopamine, and showed crucial anti-inflammatory effects in a cellular model of neuroinflammation. After a preliminary pharmacokinetic study, we explored the action of our representative 2-(benzo[b]thiophen-2-yl)-1H-imidazole LSL33 in a mouse model of AD (5xFAD). Oral administration of LSL33 at 2 mg/Kg for 4 weeks ameliorated 5XFAD cognitive impairment and synaptic plasticity, as well as reduced neuroinflammation markers. In summary, this new I2-IR ligand that promoted beneficial effects in a well-established AD mouse model should be considered a promising therapeutic strategy for neurodegeneration.

Pepper (Capsicum annuum L.) fruit is a horticultural product consumed worldwide which has great nutritional and economic relevance. Besides the phenotypical changes that pepper fruit undergo during ripening, there are many associated modifications at transcriptomic, proteomic, biochemical, and metabolic levels. Nitric oxide (NO) is a recognized signal molecule that can exert regulatory functions in diverse plant processes including fruit ripening, but the relevance of NADPH as a fingerprinting of the crop physiology including ripening has also been proposed. Glucose-6-phosphate dehydrogenase (G6PDH) is the first and rate-limiting enzyme of the oxidative phase of the pentose phosphate pathway (oxiPPP) with the capacity to generate NADPH. Thus far, the available information on G6PDH and other NADPH-generating enzymatic systems in pepper plants, and their expression during the ripening of sweet pepper fruit, is very scarce. Therefore, an analysis at the transcriptomic, molecular and functional levels of the G6PDH system has been accomplished in this work for the first time. Based on a data-mining approach to the pepper genome and fruit transcriptome (RNA-seq), four G6PDH genes were identified in pepper plants and designated CaG6PDH1 to CaG6PDH4, with all of them also being expressed in fruits. While CaG6PDH1 encodes a cytosolic isozyme, the other genes code for plastid isozymes. The time-course expression analysis of these CaG6PDH genes during different fruit ripening stages, including green immature (G), breaking point (BP), and red ripe (R), showed that they were differentially modulated. Thus, while CaG6PDH2 and CaG6PDH4 were upregulated at ripening, CaG6PDH1 was downregulated, and CaG6PDH3 was slightly affected. Exogenous treatment of fruits with NO gas triggered the downregulation of CaG6PDH2, whereas the other genes were positively regulated. In-gel analysis using non-denaturing PAGE of a 50–75% ammonium-sulfate-enriched protein fraction from pepper fruits allowed for identifying two isozymes designated CaG6PDH I and CaG6PDH II, according to their electrophoretic mobility. In order to test the potential modulation of such pepper G6PDH isozymes, in vitro analyses of green pepper fruit samples in the presence of different compounds including NO donors (S-nitrosoglutathione and nitrosocysteine), peroxynitrite (ONOO−), a hydrogen sulfide (H2S) donor (NaHS, sodium hydrosulfide), and reducing agents such as reduced glutathione (GSH) and L-cysteine (L-Cys) were assayed. While peroxynitrite and the reducing compounds provoked a partial inhibition of one or both isoenzymes, NaHS exerted 100% inhibition of the two CaG6PDHs. Taken together these data provide the first data on the modulation of CaG6PDHs at gene and activity levels which occur in pepper fruit during ripening and after NO post-harvest treatment. As a consequence, this phenomenon may influence the NADPH availability for the redox homeostasis of the fruit and balance its active nitro-oxidative metabolism throughout the ripening process.

Irma was a major hurricane that developed during the 2017 season. It was a category 5 on the Saffir–Simpson Hurricane wind scale. This hurricane caused severe damage in the Caribbean area and the Florida Keys. The social, economic, and environmental impacts, mainly related to coastal flooding, were also significant in Cuba. The maximum limits of coastal flooding caused by this hurricane were determined in this research. Field trips and the use of the GPS supported our work, which focused on both the northern and southern coasts of the Ciego de Ávila province. This work has been critical for improving coastal flooding scenarios related to a strong hurricane, as it has been the first experience according to hurricane data since 1851. Results showed that the Punta Alegre and Júcaro towns were the most affected coastal towns. The locals had never seen similar flooding in these places before. The differences between flood areas associated with Hurricane Irma and previous modeled hazard scenarios were evident (the flooded areas associated with Hurricane Irma were smaller than those modeled for categories 1, 3, and 5 hurricanes). The effects of this hurricane on the most vulnerable coastal settlements, including the impacts on the archeological site “Los Buchillones”, were also assessed.

This work reports the development and application of a highly selective core@shell-based quantum dot–molecularly imprinted polymer (QD@MIP) sensor for the detection of sulfadiazine (SDZ)—an antibiotic which belongs to the sulfonamide family. The synthesis of the smart material or MIP (molecularly imprinted polymer) was carried out by a precipitation method directly on the quantum dot surface, which played the role of a fluorescent probe in the optical sensor. The synthesized polymer was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. Fluorescence experiments were performed in order to evaluate the effects of pH, interaction time of the QD@MIP with the analyte and SDZ concentration in different matrices. Under optimized conditions, a linear concentration range of 10.0–60.0 ppm and a limit of detection of 3.33 ppm were obtained. The repeatability and reproducibility of the proposed QD@MIP were evaluated in terms of the RSD, where RSD values of less than 5% were obtained in both tests. Selectivity studies were carried out in the presence of four possible interfering substances with quenching properties, and the signals obtained for these interferents confirmed the excellent selectivity of the proposed sensor; the imprinting factor value obtained for SDZ was 1.64. Finally, the proposed sensor was applied in real animal-based food samples using a spiked concentration of SDZ, where the recovery values obtained were above 90% (experiments were performed in triplicate).

In this paper, we present an alternative technique for the removal of Brilliant Green dye (BG) in aqueous solutions based on the application of molecularly imprinted polymer (MIP) as a selective adsorbent for BG. The MIP was prepared by bulk radical polymerization using BG as the template; methacrylic acid (MAA) as the functional monomer, selected via computer simulations; ethylene glycol dimethacrylate (EGDMA) as cross-linker; and 2,2′-azobis(2-methylpropionitrile) (AIBN) as the radical initiator. Scanning electron microscopy (SEM) analyses of the MIP and non-molecularly imprinted polymer (NIP)—used as the control material—showed that the two polymers exhibited similar morphology in terms of shape and size; however, N2 sorption studies showed that the MIP displayed a much higher BET surface (three times bigger) compared to the NIP, which is clearly indicative of the adequate formation of porosity in the former. The data obtained from FTIR analysis indicated the successful formation of imprinted polymer based on the experimental procedure applied. Kinetic adsorption studies revealed that the data fitted quite well with a pseudo-second order kinetic model. The BG adsorption isotherm was effectively described by the Langmuir isotherm model. The proposed MIP exhibited high selectivity toward BG in the presence of other interfering dyes due to the presence of specific recognition sites (IF = 2.53) on its high specific surface area (112 m2/g). The imprinted polymer also displayed a great potential when applied for the selective removal of BG in real river water samples, with recovery ranging from 99 to 101%.

To enhance the leaching of chalcopyrite concentrates, this study evaluated a new process for extracting copper using iodized solutions and sulfuric acid diluted in seawater without pressure or high temperatures. The work involved a leaching test carried out under various conditions by varying the concentrations of chloride ions, H2SO4, and an evenly distributed oxygen supply in an aeration system. It was demonstrated that Cl− ion addition could promote the chalcopyrite-leaching process. The leaching efficiency of copper reached 70% after 96 h. However, a chloride ion dosage excess can have the opposite effect on extraction, reducing copper recovery. XRD and SEM-EDS results showed that cuprous chloride (CuCl) was formed at high dosages (>0.5 M); meanwhile, at a lower dosage, elemental sulfur (S) was formed in the presence of sulfuric acid solution and seawater medium. In contrast, in an aerated system, surface roughness markedly increased due to continuous oxidation on the surface of the ore. This change in morphology and the high value of the redox potential, given by the aerated system and the acidic environment, allowed copper recovery of up to 70% after 96 h. The results showed that an aerated system is the most effective factor in chalcopyrite concentrate leaching.

Cattle are a primary reservoir of enterohemorrhagic Escherichia coli (EHEC) O157:H7. Currently, there are no effective methods of eliminating this important zoonotic pathogen from cattle, and colonization resistance in relation to EHEC O157:H7 in cattle is poorly understood. We developed a gnotobiotic EHEC O157:H7 murine model to examine aspects of the cattle pathogen–microbiota interaction, and to investigate competitive suppression of EHEC O157:H7 by 18 phylogenetically distinct commensal E. coli strains of bovine origin. As stress has been suggested to influence enteric colonization by EHEC O157:H7 in cattle, corticosterone administration (±) to incite a physiological stress response was included as an experimental variable. Colonization of the intestinal tract (IT) of mice by the bovine EHEC O157:H7 strain, FRIK-2001, mimicked characteristics of bovine IT colonization. In this regard, FRIK-2001 successfully colonized the IT and temporally incited minimal impacts on the host relative to other EHEC O157:H7 strains, including on the renal metabolome. The presence of the commensal E. coli strains decreased EHEC O157:H7 densities in the cecum, proximal colon, and distal colon. Moreover, histopathologic changes and inflammation markers were reduced in the distal colon of mice inoculated with commensal E. coli strains (both propagated separately and communally). Although stress induction affected the behavior of mice, it did not influence EHEC O157:H7 densities or disease. These findings support the use of a gnotobiotic murine model of enteric bovine EHEC O157:H7 colonization to better understand pathogen–host–microbiota interactions toward the development of effective on-farm mitigations for EHEC O157:H7 in cattle, including the identification of bacteria capable of competitively colonizing the IT.

In this work, some micro-samples belonging to the open-air rock art site of Cueva de la Vieja (Alpera, Albacete, Spain) were analysed. These samples were collected after and before a desalination treatment was carried out, with the aim of removing a whitish layer of concretion that affected the painted panel. The diagnostic study was performed to study the conservation state of the panel, and to then confirm the effectiveness of the treatment. Micro energy dispersive X-ray fluorescence spectrometry, Raman spectroscopy, and X-ray diffraction were employed for the characterization of the degradation product as well as that of the mineral substrate and pigments. The micro-samples analysis demonstrated that the painted layer was settled on a dolomitic limestone with silicon aggregates and aluminosilicates as well as iron oxides. The whitish crust was composed by sulfate compounds such as gypsum (CaSO4·2H2O) with a minor amount of epsomite (MgSO4·7H2O). An extensive phenomenon of biological activity has been demonstrated since then in almost all of the samples that have been analysed, and the presence of calcium oxalates monohydrate (CaC2O4·H2O) and dehydrate (CaC2O4·2H2O) were found. The presence of both calcium oxalates probably favoured the conservation of the pictographs. In addition, some carotenoids pigments, scytonemin (C36H20N2O4), and astaxanthin (C40H52O4) were characterized both by Raman spectroscopy and by X-ray diffraction. Hematite was found as a pigment voluntarily used for the painting of the panels used in a mixture with hydroxyapatite and amorphous carbon. The results of the analyses of the samples taken after the cleaning treatment confirmed a substantial decrease in sulphate formation on the panel surface.

Conventional cancer therapies suffer from nonspecificity, drug resistance, and a poor bioavailability, which trigger severe side effects. To overcome these disadvantages, in this study, we designed and evaluated the in vitro potential of paclitaxel-loaded, PLGA-gold, half-shell nanoparticles (PTX-PLGA/Au-HS NPs) conjugated with cyclo(Arg-Gly-Asp-Phe-Lys) (cyRGDfk) as a targeted chemo-photothermal therapy system in HeLa and MDA-MB-231 cancer cells. A TEM analysis confirmed the successful gold half-shell structure formation. High-performance liquid chromatography showed an encapsulation efficiency of the paclitaxel inside nanoparticles of more than 90%. In the release study, an initial burst release of about 20% in the first 24 h was observed, followed by a sustained drug release for a period as long as 10 days, reaching values of about 92% and 49% for NPs with and without near infrared laser irradiation. In in vitro cell internalization studies, targeted nanoparticles showed a higher accumulation than nontargeted nanoparticles, possibly through a specific interaction of the cyRGDfk with their homologous receptors, the ανβ3 y ανβ5 integrins on the cell surface. Compared with chemotherapy or photothermal treatment alone, the combined treatment demonstrated a synergistic effect, reducing the cell viability to 23% for the HeLa cells and 31% for the MDA-MB-231 cells. Thus, our results indicate that these multifuncional nanoparticles can be considered to be a promising targeted chemo-photothermal therapy system against cancer.

This study aimed to evaluate the tannin content in the bark of five pine species from a forest harvesting area of the Ixtlán de Juárez community, Oaxaca, México. The species studied were Pinus patula, Pinus ayacahuite, Pinus rudis, Pinus douglasiana, Pinus pseudostrobus. The bark samples were subjected to a drying, grinding, and sieving process. These compounds were extracted using two methods: by constant reflux with ethanol for three hours or in a water bath with distilled water for two hours. The percentage of total extract, Stiasny number, and condensed tannins were quantified. The quantitative number of condensed tannins present in the bark for each of the five species studied ranged from 0.65% to 5.14% for the ethanolic extracts and 0.14% to 1.46% for the aqueous extracts. Analysis by Fourier transform infrared spectroscopy (FTIR) identified polyphenolic compounds and functional groups characteristic of tannins. Analysis by scanning electron microscopy (SEM) and X-ray dispersive spectroscopy (EDX) provided the elemental analysis and chemical composition of the tannin extracts, respectively, finding trace elements of silver, cadmium, phosphorus, iodine, and sulfur, which are minerals present in the soil, meaning that through processes of micronutrient absorption, these can interact with the tannins or polyphenols in the barks of the tree species being studied. The results indicate that the bark of P. patula and P. ayacahuite have a higher concentration of condensed tannins, 5.14% and 4.71%, respectively, in the ethanol extraction, and may be susceptible to exploitation due to the amount of bark generated in forestry activities.

Our aim was to evaluate the immune response of healthcare workers included in the RIPOVAC study, after receiving a booster dose (third dose), in terms of intensity and persistence of induced antibodies. In the second phase of the RIPOVAC study, between December 2021 and January 2022, eight months after the second dose, 389 voluntary, immunocompetent, non-pregnant healthcare workers received a booster dose of SARS-CoV-2 vaccine, and a serum sample was obtained. Two groups of patients were established: with and without previous SARS-CoV-2 infection. In order to quantify anti-S1 IgG (AU/mL) we used CMIA (Abbott). All of the health workers were anti-S IgG positive 8 months after receiving the booster dose of the vaccine, with a mean of 17,040 AU/mL. In 53 patients without previous infection, antibody levels increased by a mean of 10,762 AU/mL. This figure is seven times higher than the one produced after the second dose (1506 AU/mL). The booster dose produces a robust elevation of the antibody level, which persists at 8 months, with levels significantly higher than those reached after the second dose, which allow one to predict a persistence of more than one year. The study demonstrates the efficacy of the booster dose of anti-SARS-CoV-2 vaccines.

Nickel-based Ni-Cr-Si-B self-fluxing alloys are excellent candidates to replace cobalt-based alloys in aeronautical components. In this work, metal additive manufacturing by directed energy deposition using a laser beam (DED-LB, also known as LMD) and gas-atomized powders as a material feedstock is presented as a potential manufacturing route for the complex processing of these alloys. This research deals with the advanced material characterization of these alloys obtained by LMD and the study and understanding of their solidification paths and strengthening mechanisms. The as-built microstructure, the Vickers hardness at room temperature and at high temperatures, the nanoindentation hardness and elastic modulus of the main phases and precipitates, and the strengthening mechanisms were studied in bulk cylinders manufactured under different chemical composition grades and DED-LB/p process parameter sets (slow, normal, and fast deposition speeds), with the aim of determining the influence of the chemical composition in commercial Ni-Cr-Si-Fe-B alloys. The hardening of Ni-Cr-Si-Fe-B alloys obtained by LMD is a combination of the solid solution hardening of gamma nickel dendrites and eutectics and the contribution of the precipitation hardening of small chromium-rich carbides and hard borides evenly distributed in the as-built microstructure.

African swine fever (ASF) is a viral disease of swine with a huge impact due to its high mortality. Lately, the disease has actively spread around the world, affecting new areas from which it had been eradicated long ago. To date, ASF control is carried out by the implementation of strict biosecurity measures such as the early identification of infected animals. In this work, two fluorescent rapid tests were developed to improve the sensitivity of point-of-care diagnosis of ASF. For antigen (Ag) detection in blood, a double-antibody sandwich fluorescent lateral flow assay (LFA) was developed, employing a newly developed recombinant antibody to the VP72 of the virus. To complement the diagnosis, a double-recognition fluorescent LFA was developed using the VP72 for the detection of specific antibodies (Ab) in sera or blood. Both assays statistically improved the detection of the disease when compared to the commercial colorimetric assays INgezim® ASFV CROM Ag and INgezim® PPA CROM Anticuerpo, respectively, with higher statistical significance between 11 and 39 days post-infection. From the observation of results, it can be concluded that the combination of both Ag-LFA and Ab-LFA assays would facilitate the identification of infected animals, regardless of post-infection time.

NADPH is an indispensable cofactor in a wide range of physiological processes that is generated by a family of NADPH dehydrogenases, of which the NADP-dependent malic enzyme (NADP-ME) is a member. Pepper (Capsicum annuum L.) fruit is a horticultural product consumed worldwide that has great nutritional and economic relevance. Besides the phenotypical changes that pepper fruit undergoes during ripening, there are many associated modifications at transcriptomic, proteome, biochemical and metabolic levels. Nitric oxide (NO) is a recognized signal molecule with regulatory functions in diverse plant processes. To our knowledge, there is very scarce information about the number of genes encoding for NADP-ME in pepper plants and their expression during the ripening of sweet pepper fruit. Using a data mining approach to evaluate the pepper plant genome and fruit transcriptome (RNA-seq), five NADP-ME genes were identified, and four of them, namely CaNADP-ME2 to CaNADP-ME5, were expressed in fruit. The time course expression analysis of these genes during different fruit ripening stages, including green immature (G), breaking point (BP) and red ripe (R), showed that they were differentially modulated. Thus, while CaNADP-ME3 and CaNADP-ME5 were upregulated, CaNADP-ME2 and CaNADP-ME4 were downregulated. Exogenous NO treatment of fruit triggered the downregulation of CaNADP-ME4. We obtained a 50–75% ammonium–sulfate-enriched protein fraction containing CaNADP-ME enzyme activity, and this was assayed via non-denaturing polyacrylamide gel electrophoresis (PAGE). The results allow us to identify four isozymes designated from CaNADP-ME I to CaNADP-ME IV. Taken together, the data provide new pieces of information on the CaNADP-ME system with the identification of five CaNADP-ME genes and how the four genes expressed in pepper fruits are modulated during ripening and exogenous NO gas treatment.

(1) Background: Acinetobacter baumannii has become the most important pathogen responsible for nosocomial infections in health systems. It expresses several resistance mechanisms, including the production of β-lactamases, changes in the cell membrane, and the expression of efflux pumps. (2) Methods: A. baumannii was detected by PCR amplification of the blaOXA-51-like gene. Antimicrobial susceptibility to fluoroquinolones and aminoglycosides was assessed using the broth microdilution technique according to 2018 CLSI guidelines. Efflux pump system activity was assessed by the addition of a phenylalanine–arginine beta-naphthylamide (PAβN) inhibitor. (3) Results: A total of nineteen A. baumannii clinical isolates were included in the study. In an overall analysis, in the presence of PAβN, amikacin susceptibility rates changed from 84.2% to 100%; regarding tobramycin, they changed from 68.4% to 84.2%; for nalidixic acid, they changed from 73.7% to 79.0%; as per ciprofloxacin, they changed from 68.4% to 73.7%; and, for levofloxacin, they stayed as 79.0% in both groups. (4) Conclusions: The addition of PAβN demonstrated a decrease in the rates of resistance to antimicrobials from the family of quinolones and aminoglycosides. Efflux pumps play an important role in the emergence of multidrug-resistant A. baumannii strains, and their inhibition may be useful as adjunctive therapy against this pathogen.

The potential application of biodegradable and biocompatible polymeric micelles formed by Pluronic F127 and P104 as nanocarriers of the antineoplastic drugs docetaxel (DOCE) and doxorubicin (DOXO) is presented in this work. The release profile was carried out under sink conditions at 37 °C and analyzed using the Higuchi, Korsmeyer–Peppas, and Peppas–Sahlin diffusion models. The cell viability of HeLa cells was evaluated using the proliferation cell counting kit CCK-8 assay. The formed polymeric micelles solubilized significant amounts of DOCE and DOXO, and released them in a sustained manner for 48 h, with a release profile composed of an initial rapid release within the first 12 h followed by a much slower phase the end of the experiments. In addition, the release was faster under acidic conditions. The model that best fit the experimental data was the Korsmeyer–Peppas one and denoted a drug release dominated by Fickian diffusion. When HeLa cells were exposed for 48 h to DOXO and DOCE drugs loaded inside P104 and F127 micelles, they showed lower IC50 values than those reported by other researchers using polymeric nanoparticles, dendrimers or liposomes as alternative carriers, indicating that a lower drug concentration is needed to decrease cell viability by 50%.

The diagnosis of a child’s visual impairment is remembered vividly and intensely by their parents. However, the way in which the diagnosis is communicated may affect the development and persistence of this memory. The aim of this study is to analyze the circumstances in which the first news of the diagnosis of visual impairment in children is given and whether the memory of this event persists over time leading to a flashbulb memory. A longitudinal study was carried out with the participation of 38 mothers. Data were collected on sociodemographics, clinical variables, circumstances surrounding the communication of the diagnosis, and the degree of agreement of the information in the two phases of the research. The diagnosis was, on the whole, given to both parents at the same time, in medical language and with little tact, generally in the office of an ophthalmologist. The mothers would have preferred to have received the news in a different way, and the existence of a flashbulb memory is confirmed, more dependent on the context in which the diagnosis was given and its content than on sociodemographic and clinical factors. The way in which the first news of such a diagnosis is given plays a significant role in how it is remembered. Therefore, an improvement in medical practice regarding the communication of such diagnoses is recommended.