Search

Background: Patients with lower extremity burn injuries have decreased gait function. Gait dysfunctions are compensated by activation of executive areas such as the prefrontal cortex (PFC). Although robot-assisted gait training (RAGT) can improve gait function, the training mechanisms of RAGT are unknown. We aimed to determine the clinical effects of RAGT in patients with burns and investigate their underlying mechanisms. Methods: This single-blind, randomized controlled trial involved 54 patients with lower extremity burns. The RAGT group underwent RAGT using SUBAR® and conventional training. The control (CON) group underwent only conventional training. The primary outcome was cortical activity measured using a functional near-infrared spectroscopy device before and after 8 weeks of training to confirm the compensatory effect of gait dysfunction. The secondary outcomes were the functional ambulation category (FAC) to evaluate gait performance, 6-min walking test (6 MWT) distance to measure gait speed, isometric force and range of motion (ROM) of lower extremities to evaluate physical function, and the visual analog scale (VAS) score to evaluate subjective pain during gait. Results: PFC activation during the gait phase in the RAGT group decreased significantly compared with that of the CON. The VAS score decreased and FAC score improved after 8 weeks of training in both groups. The 6 MWT scores, isometric strengths (the left knee flexor and bilateral ankle plantar flexors), and the ROMs (the extensions of bilateral hip and bilateral knee) of the RAGT group were significantly improved compared with those of the CON. RAGT improved gait speed, lower extremity ROMs, and lower extremity muscles strengths in patients with burns. Conclusions: The improvement in gait speed and cerebral blood flow evaluation results suggests that the automatization of gait is related to the treatment mechanism during RAGT.

In this study, we introduce a novel approach for synthesizing lignin-incorporated castor-oil-based cationic waterborne polyurethane (CWPU-LX), diverging significantly from conventional waterborne polyurethane dispersion synthesis methods. Our innovative method efficiently reduces the required solvent quantity for CWPU-LX synthesis to approximately 50% of that employed in traditional WBPU experimental procedures. By incorporating lignin into the polyurethane matrix using this efficient and reduced-solvent method, CWPU-LX demonstrates enhanced properties, rendering it a promising material for diverse applications. Dynamic interactions between lignin and polyurethane molecules contribute to improved mechanical properties, enhanced thermal stability, and increased solvent resistance. Dynamic interactions between lignin and polyurethane molecules contribute to improved tensile strength, up to 250% compared to CWPU samples. Furthermore, the inclusion of lignin enhanced thermal stability, showcasing a 4.6% increase in thermal decomposition temperature compared to conventional samples and increased solvent resistance to ethanol. Moreover, CWPU-LX exhibits desirable characteristics such as protection against ultraviolet light and antibacterial properties. These unique properties can be attributed to the presence of the polyphenolic group and the three-dimensional structure of lignin, further highlighting the versatility and potential of this material in various application domains. The integration of lignin, a renewable and abundant resource, into CWPU-LX exemplifies the commitment to environmentally conscious practices and underscores the significance of greener materials in achieving a more sustainable future.

Epidermal keratinocytes are highly activated, hyper-proliferated, and abnormally differentiated in the post-burn hypertrophic scar (HTS); however, the effects of scar fibroblasts (SFs) on keratinocytes through cell–cell interaction in HTS remain unknown. Here, we investigated the effects of HTSF-derived exosomes on the proliferation and differentiation of normal human keratinocytes (NHKs) compared with normal fibroblasts (NFs) and their possible mechanism to provide a reference for clinical intervention of HTS. Fibroblasts were isolated and cultured from HTS and normal skin. Both HTSF-exosomes and NF-exosomes were extracted via a column-based method from the cell culture supernatant. NHKs were treated for 24 or 48 h with 100 μg/mL of cell-derived exosomes. The expression of proliferation markers (Ki-67 and keratin 14), activation markers (keratins 6, 16, and 17), differentiation markers (keratins 1 and 10), apoptosis factors (Bax, Bcl2, caspase 14, and ASK1), proliferation/differentiation regulators (p21 and p27), and epithelial–mesenchymal transition (EMT) markers (E-cadherin, N-cadherin, and vimentin) was investigated. Compared with NF-exosomes, HTSF-exosomes altered the molecular pattern of proliferation, activation, differentiation, and apoptosis, proliferation/differentiation regulators of NHKs, and EMT markers differently. In conclusion, our findings indicate that HTSF-derived exosomes may play a role in the epidermal pathological development of HTS.

Compression therapy for burn scars can accelerate scar maturation and improve clinical symptoms (pruritus and pain). This study objectively verified the effect of pressure garment therapy in maintaining a therapeutic pressure range for hypertrophic scars. Sixty-five participants (aged 20~70 years) with partial- or full-thickness burns, Vancouver scar scale score of ≥4, and a hypertrophic scar of ≥4 cm × 4 cm were enrolled. Compression pressure was measured weekly using a portable pressure-monitoring device to regulate this pressure at 15~25 mmHg for 2 months. In the control group, the compression garment use duration and all other burn rehabilitation measures were identical except for compression monitoring. No significant difference was noted in the initial evaluations between the two groups (p > 0.05). The improvements in the amount of change in scar thickness (p = 0.03), erythema (p = 0.03), and sebum (p = 0.02) were significantly more in the pressure monitoring group than in the control group. No significant differences were noted in melanin levels, trans-epidermal water loss, or changes measured using the Cutometer® between the two groups. The efficacy of compression garment therapy for burn-related hypertrophic scars can be improved using a pressure-monitoring device to maintain the therapeutic range.

Chronic pain is common after burn injuries, and post-burn neuropathic pain is the most important complication that is difficult to treat. Scrambler therapy (ST) is a non-invasive modality that uses patient-specific electrocutaneous nerve stimulation and is an effective treatment for many chronic pain disorders. This study used magnetic resonance imaging (MRI) to evaluate the pain network-related mechanisms that underlie the clinical effect of ST in patients with chronic burn-related pain. This prospective, double-blinded, randomized controlled trial (ClinicalTrials.gov: NCT03865693) enrolled 43 patients who were experiencing chronic neuropathic pain after unilateral burn injuries. The patients had moderate or greater chronic pain (a visual analogue scale (VAS) score of ≥5), despite treatment using gabapentin and other physical modalities, and were randomized 1:1 to receive real or sham ST sessions. The ST was performed using the MC5-A Calmare device for ten 45 min sessions (Monday to Friday for 2 weeks). Baseline and post-treatment parameters were evaluated subjectively using the VAS score for pain and the Hamilton Depression Rating Scale; MRI was performed to identify objective central nervous system changes by measuring the cerebral blood volume (CBV). After 10 ST sessions (two weeks), the treatment group exhibited a significant reduction in pain relative to the sham group. Furthermore, relative to the pre-ST findings, the post-ST MRI evaluations revealed significantly decreased CBV in the orbito-frontal gyrus, middle frontal gyrus, superior frontal gyrus, and gyrus rectus. In addition, the CBV was increased in the precentral gyrus and postcentral gyrus of the hemisphere associated with the burned limb in the ST group, as compared with the CBV of the sham group. Thus, a clinical effect from ST on burn pain was observed after 2 weeks, and a potential mechanism for the treatment effect was identified. These findings suggest that ST may be an alternative strategy for managing chronic pain in burn patients.

Burn injuries and their treatment are extremely painful. This study aimed to determine whether virtual reality (VR) could reduce pain during robot-assisted gait training (RAGT) in burn patients by analyzing the cerebral blood flow (CBF) in the prefrontal cortex over time using functional near-infrared spectroscopy (fNIRS). The patients included in this study complained of a pain score ≥5 on a visual analog scale (VAS) during RAGT, which was performed 10 times for 2 weeks. Each session consisted of 15 min of VR application, with a 2-min break, and 15 min without VR. The average values of oxyhemoglobin and deoxyhemoglobin concentrations in the prefrontal cortex on fNIRS were calculated at four stages: temporal delay time with only RAGT, RAGT without VR, temporal delay time with RAGT and VR, and RAGT with VR. The pain scores and CBF were evaluated in sessions 1, 5, and 10 of the RAGT. The mean VAS pain scores were significantly lower (p < 0.05) in the experimental condition than in the control condition. Oxyhemoglobin in the prefrontal lobe significantly increased when RAGT was performed with VR. In conclusion, VR may be a strong nonpharmacological pain reduction technique for burn patients during physical therapy.

Cochlear synaptopathy refers to a subclinical hearing pathology which could potentially explain hearing difficulties within the normal hearing threshold; it is also called “hidden hearing loss”. We hypothesized that a temporary threshold shift in sudden sensorineural hearing loss (ISSNHL) also affects the function in the synapse. The aim of the study was to evaluate the presence of cochlear synaptopathy in patients who had completely recovered from unilateral SSNHL Nineteen patients who had completely recovered from ISSNHL from January 2018 to June 2021 were assessed. Complete recovery was established by pure tone audiometry (PTA) 3 months after treatment, according to the American Academy of Otolaryngology–Head and Neck Surgery criteria. Subjects completed the pure tone audiometry, speech audiometry and auditory brain stem response (ABR) test, and completed a questionnaire regarding hearing loss after hearing recovery. The ABR amplitudes of wave I and wave V, and the ratio of wave I/V of both ears (recovered side and healthy side) were assessed. A visual analog scale (VAS) and a hidden hearing loss questionnaire were used to evaluate subjective hearing difficulty. The ABR waves I of the recovered ears had a significantly lower amplitude (p = 0.002) than those of the healthy side, whereas there was no difference in wave V (p = 0.985) or in the ratio of wave I/V (p = 0.107). Some patients still felt mild hearing difficulty although their PTA results were normal, but there was no clear relationship between the VAS score, wave I amplitude and speech recognition scores. The present findings point to the possible existence of cochlear synaptopathy in ears that have completely recovered from unilateral sudden sensorineural hearing loss. We suggest that the causes of cochlear synaptopathy and of idiopathic sudden hearing loss may have something in common.

This study investigated the effects of robot-assisted gait training (RAGT) on gait function in burn patients. Briefly, 40 burn patients were randomly divided into an RAGT group or a conventional training (CON) group. SUBAR® (Cretem, Korea) is a wearable robot with a footplate that simulates normal gait cycles. The RAGT group underwent 30 min of robot-assisted training using SUBAR® with 30 min of conventional physiotherapy once a day, 5 days a week for 12 weeks. Patients in the CON group received 30 min of overground gait training and range-of-motion (ROM) exercises twice a day for 5 days a week for 12 weeks. The RAGT group and the CON group underwent 60 min of training per day. The intervention frequency and duration did not differ between the RAGT group and the CON group. The main outcomes were functional ambulatory category (FAC); 6-min walking test (6MWT); visual analogue scale (VAS) during gait movement; ROM; and isometric forces of bilateral hip, knee, and ankle muscles before and after 12 weeks of training. The results of the VAS, FAC, and 6MWT (8.06 ± 0.66, 1.76 ± 0.56, and 204.41 ± 85.60) before training in the RAGT group improved significantly (4.41 ± 1.18, 4.18 ± 0.39, and 298.53 ± 47.75) after training (p < 0.001, p < 0.001, and p < 0.001). The results of the VAS, FAC, and 6MWT (8.00 ± 1.21, 1.75 ± 0.58, and 220.94 ± 116.88) before training in the CON group improved significantly (5.00 ± 1.03, 3.81 ± 1.05, and 272.19 ± 110.14) after training (p < 0.001, p < 0.001, and p = 0.05). There were differences in the improvement of results of the VAS, FAC, and 6MWT between groups after training, but they were not statistically significant (p = 0.23, p = 0.14, and p = 0.05). The isometric strengths of the right hip extensor (p = 0.02), bilateral knee flexor (p = 0.04 in the right, and p = 0.001 in the left), bilateral knee extensor (p = 0.003 in the right, and p = 0.002 in the left), bilateral ankle dorsiflexor (p = 0.04 in the right, and p = 0.02 in the left), and bilateral ankle plantarflexor (p = 0.001 in the right, and p = 0.008 in the left) after training were significantly improved compared with those before training in the RAGT group. The ROMs of the right knee extension (p = 0.03) and bilateral ankle plantarflexion (p = 0.008 in the right, and p = 0.03 in the left) were significantly improved compared with measurements before training in the RAGT. There were no significant differences of the isometric strengths and ROMs of the bilateral hip, knee, and ankle muscles after training in the CON group. There were significant improvements in the isometric strengths of the left knee flexor (p = 0.01), left ankle dorsiflexor (p = 0.01), and left ankle plantarflexor (p = 0.003) between the two groups. The results suggested that RAGT is effective to facilitate early recovery of muscles strength after a burn injury. This is the first study to evaluate the effectiveness of RAGT in patients with burns compared with those receiving conventional training. The absence of complications in burn patients provides an opportunity to enlarge the application area of RAGT.

Postburn hypertrophic scarring is a common complication in burn injuries to the hands, often associated with impaired hand function. We evaluated the effects of extracorporeal shock wave therapy (ESWT), compared to a sham stimulation therapy, on hypertrophic scars of the hand caused by burn injury and investigated its effects on hand function. This was a double-blinded, randomized, controlled trial of 48 patients with a burn to their dominant right hand. The parameters of ESWT were as follows: energy flux density, 0.05–0.30 mJ/mm2; frequency, 4 Hz; 1000 to 2000 impulses per treatment; four treatments, once a week for four weeks. The outcomes measured were as follows: a 10-point visual analogue scale pain score; Vancouver scar scale for scar vascularity, height, pliability and pigmentation; ultrasound measurement of scar thickness; Jebsen−Taylor hand function test; grip strength; Perdue pegboard test; and the Michigan hand outcomes questionnaire. The change in the score from baseline to post-treatment was compared between the two groups. ESWT improved the pain score (p = 0.001), scar thickness (p = 0.018), scar vascularity (p = 0.0015), and improved hand function (simulated card-turning, p = 0.02; picking up small objects, p = 0.004). The other measured outcomes were not different between the two groups. ESWT is effective in decreasing pain, suppressing hypertrophic scarring, and improving hand function.

Hands are the most frequent burn injury sites. Appropriate rehabilitation is essential to ensure good functional recovery. Virtual reality (VR)-based rehabilitation has proven to be beneficial for the functional recovery of the upper extremities. We investigated and compared VR-based rehabilitation with conventional rehabilitation (CON) in patients with burned hands. Fifty-seven patients were randomized into a VR or CON group. Each intervention was applied to the affected hand for four weeks, and clinical and functional variables were evaluated. Hand function was evaluated before intervention and four weeks after intervention using the Jebsen-Taylor hand function test (JTT), Grasp and Pinch Power Test, Purdue Pegboard test (PPT), and Michigan Hand Outcomes Questionnaire (MHQ). The JTT scores for picking up small objects and the MHQ scores for hand function, functional ADL, work, pain, aesthetics, and patient satisfaction were significantly higher in the VR group than in the CON group (p < 0.05). The results suggested that VR-based rehabilitation is likely to be as effective as conventional rehabilitation for recovering function in a burned hand. VR-based rehabilitation may be considered as a treatment option for patients with burned hands.

The metal-insulator-metal (MIM) plasmonic waveguide has been highly anticipated for confining and guiding surface plasmon polaritons (SPPs) on the subwavelength scale. However, perennial drawbacks such as a short propagation length and an unbounded transverse field have set limits on the use of the MIM waveguide in various applications. Herein, diffraction- and dispersion-free MIM modes are synthesized by using space–time wave packets (STWPs) and are therefore referred to as space–time MIM (ST-MIM) waveguide modes. Compared to a Gaussian pulse of the same duration and spectral bandwidth, the ST-MIM demonstrates enhanced propagation lengths of about 2.4 times for the symmetric mode and about 6.3 times for the antisymmetric mode. In the simulations, the ST-MIMs are confined in all transverse dimensions, thereby overriding the diffraction limits. In addition, the group velocities of the ST-MIMs can be arbitrarily designed, which makes it possible to synchronize the pulse propagation speeds of the symmetric and antisymmetric MIM modes.

Robot-assisted gait training (RAGT) has been proven effective in improving gait function in not only patients with central nervous system damage, but also in patients who have undergone musculoskeletal surgery. Nevertheless, evidence supporting the efficacy of such training in burn patients remains insufficient. This report aimed to evaluate the effect of RAGT in burn patients with spinal cord injuries (SCI) caused by electrical trauma. We reported a case of two patients. The total duration of each session was about 1 h 30 min. This included 10 min to put on the exoskeleton, 30 min of robot-assisted training using SUBAR®, 10 min to remove the exoskeleton, 10 min to observe whether complications such as skin abrasion, ulcer, or pain occur in the scar area after RAGT, and 30 min of conventional physiotherapy, at a rate of 5 days a week for 12 weeks. All measurements were assessed before training (0 week) and after training (12 weeks). The American Spinal Cord Injury Association (ASIA) lower extremity motor score (LEMS), passive range of motions (ROMs) of different joints (hip, knee, and ankle), ambulatory motor index (AMI), functional ambulation categories (FAC), and 6 min walking (6 MWT) distances were evaluated to measure the degree of gait function through training. In both patients, manual muscle test measurement and joint ROM in the lower extremities improved after 12 weeks training. The first patient scored 0 in the FAC before training. After 12 weeks of training, he could walk independently indoors, improving to an FAC score of 4. He also reached 92.16 m in the 6 MWT. LEMS improved from 22 before training to 30 after training, and AMI score improved from 12 before training to 16 after training. In the second patient, an independent walking function was not acquired. LEMS improved from 10 before training to 26 after training. AMI scores were the same at 10 points before and after training. The results suggested the possibility of achieving clinical effects in terms of improving lower extremity muscle strength, joint ROMs, and gait performance in patients with SCI caused by electrical trauma.

Introduction: Adequate bone quality is essential for long term biologic fixation of cementless total knee arthroplasty (TKA). Recently, vertebral bone quality evaluation using dual-energy computed tomography (DECT) has been introduced. However, the DECT bone mineral density (BMD) in peripheral skeleton has not been correlated with Hounsfield units (HU) or central dual-energy X-ray absorptiometry (DXA), and the accuracy remains unclear. Materials and methods: Medical records of 117 patients who underwent TKA were reviewed. DXA was completed within three months before surgery. DECT was performed with third-generation dual source CT in dual-energy mode. Correlations between DXA, DECT BMD and HU for central and periarticular regions were analyzed. Receiver operating characteristic (ROC) curves were plotted and area under the curve (AUC), optimal threshold, and sensitivity and specificity of each region of interest (ROI) were calculated. Results: Central DXA BMD was correlated with DECT BMD and HU in ROIs both centrally and around the knee (all p < 0.01). The diagnostic accuracy of DECT BMD was higher than that of DECT HU and was also higher when the T-score for second lumbar vertebra (L2), rather than for the femur neck, was used as the reference standard (all AUC values: L2 > femur neck; DECT BMD > DECT HU, respectively). Using the DXA T-score at L2 as the reference standard, the optimal DECT BMD cut-off values for osteoporosis were 89.2 mg/cm3 in the distal femur and 78.3 mg/cm3 in the proximal tibia. Conclusion: Opportunistic volumetric BMD assessment using DECT is accurate and relatively simple, and does not require extra equipment. DECT BMD and HU are useful for osteoporosis screening before cementless TKA.

Diffraction is a fundamental phenomenon that reveals the wave nature of light. When a plane wave is transmitted or reflected from a grating or other periodic structures, diffracted light waves propagate at several angles that are specified by the period of the given structure. When the optical period is shorter than the wavelength, constructive interference of diffracted light rays from the subwavelength-scale grating forms a uniform plane wave. Many studies have shown that through the appropriate design of meta-atom geometry, metasurfaces can be used to control light properties. However, most semitransparent metasurfaces are designed to perform symmetric operation with regard to diffraction, meaning that light diffraction occurs identically for front- and back-side illumination. We propose a simple single-layer plasmonic metasurface that achieves asymmetric diffraction by optimizing the transmission phase from two types of nanoslits with I- and T-shaped structures. As the proposed structure is designed to have a different effective period for each observation side, it is either diffractive or nondiffractive depending on the direction of observation. The designed structure exhibits a diffraction angle of 54°, which can be further tuned by applying different period conditions. We expect the proposed asymmetric diffraction meta-grating to have great potential for the miniaturized optical diffraction control systems in the infrared band and compact optical diffraction filters for integrated optics.

This study presents a computational method called economical auto moment limiter (eAML) that prevents a mobile cargo crane from being overloaded. The eAML detects and controls, in real time, crane overload without using boom stroke sensors and load cells, which are expensive items inevitable to existing AML systems, hence, being competitive in price. It replaces these stroke sensors and load cells that are used for the crane overload measurement with a set of mathematical formula and control logics that calculates the lifting load being handled under crane operation and the maximum lifting load. By calculating iterative them using only a pressure sensor attached under the derrick cylinder and the boom angle sensor, the mathematical model identifies the maximum descendible angle of the boom. The control logic presents the control method for preventing the crane overload by using the descendible angle obtained by the mathematical model. Both the mathematical model and the control logic are validated by rigorous simulation experiments using MATLAB on two case instances each of which eAML is used and not used, while changing the pressures on the derrick cylinder and the boom angle. The effectiveness and validity of the method are confirmed by comparing the outputs obtained by the controlled experiments performed by using a 7.6 ton crane on top of SCS887 and a straight-type maritime heavy-duty crane along with eAML. The effects attributed to the load and the wind speed are quantified to verify the reliability of eAML under the changes in external variables.

The optical properties of various nanostructures have been widely adopted for biological detection, from DNA sequencing to nano-scale single molecule biological function measurements. In particular, by employing localized surface plasmon resonance (LSPR), we can expect distinguished sensing performance with high sensitivity and resolution. This indicates that nano-scale detections can be realized by using the shift of resonance wavelength of LSPR in response to the refractive index change. In this paper, we overview various plasmonic nanostructures as potential sensing components. The qualitative descriptions of plasmonic nanostructures are supported by the physical phenomena such as plasmonic hybridization and Fano resonance. We present guidelines for designing specific nanostructures with regard to wavelength range and target sensing materials.

We report a noble optical sensing method to diagnose seed abnormalities using optical coherence tomography (OCT). Melon seeds infected with Cucumber green mottle mosaic virus (CGMMV) were scanned by OCT. The cross-sectional sensed area of the abnormal seeds showed an additional subsurface layer under the surface which is not found in normal seeds. The presence of CGMMV in the sample was examined by a blind test (n = 140) and compared by the reverse transcription-polymerase chain reaction. The abnormal layers (n = 40) were quantitatively investigated using A-scan sensing analysis and statistical method. By utilizing 3D OCT image reconstruction, we confirmed the distinctive layers on the whole seeds. These results show that OCT with the proposed data processing method can systemically pick up morphological modification induced by viral infection in seeds, and, furthermore, OCT can play an important role in automatic screening of viral infections in seeds.

The non-destructive classification of plant materials using optical inspection techniques has been gaining much recent attention in the field of agriculture research. Among them, a near-infrared (NIR) imaging method called optical coherence tomography (OCT) has become a well-known agricultural inspection tool since the last decade. Here we investigated the non-destructive identification capability of OCT to classify diversely stained (with various staining agents) Capsicum annuum seed specimens of different cultivars. A swept source (SS-OCT) system with a spectral band of 1310 nm was used to image unstained control C. annuum seeds along with diversely stained Capsicum seeds, belonging to different cultivar varieties, such as C. annuum cv. PR Ppareum, C. annuum cv. PR Yeol, and C. annuum cv. Asia Jeombo. The obtained cross-sectional images were further analyzed for the changes in the intensity of back-scattered light (resulting due to dye pigment material and internal morphological variations) using a depth scan profiling technique to identify the difference among each seed category. The graphically acquired depth scan profiling results revealed that the control specimens exhibit less back-scattered light intensity in depth scan profiles when compared to the stained seed specimens. Furthermore, a significant back-scattered light intensity difference among each different cultivar group can be identified as well. Thus, the potential capability of OCT based depth scan profiling technique for non-destructive classification of diversely stained C. annum seed specimens of different cultivars can be sufficiently confirmed through the proposed scheme. Hence, when compared to conventional seed sorting techniques, OCT can offer multipurpose advantages by performing sorting of seeds in respective to the dye staining and provides internal structural images non-destructively.

We demonstrate that optical coherence tomography (OCT) is a plausible optical tool for in vivo detection of plant seeds and its morphological changes during growth. To investigate the direct impact of salt stress on seed germination, the experiment was conducted using Capsicum annuum seeds that were treated with different molar concentrations of NaCl. To determine the optimal concentration for the seed growth, the seeds were monitored for nine consecutive days. In vivo two-dimensional OCT images of the treated seeds were obtained and compared with the images of seeds that were grown using sterile distilled water. The obtained results confirm the feasibility of using OCT for the proposed application. Normalized depth profile analysis was utilized to support the conclusions.

The study of mosquitoes and analysis of their behavior are of crucial importance in the on-going efforts to control the alarming increase in mosquito-borne diseases. Furthermore, a non-destructive and real-time imaging technique to study the anatomical features of mosquito specimens can greatly aid the study of mosquitoes. In this study, we demonstrate the three-dimensional imaging capabilities of optical coherence tomography (OCT) for structural analysis of Anopheles sinensis mosquitoes. The anatomical features of An. sinensis head, thorax, and abdominal regions, along with the morphology of internal structures, such as foregut, midgut, and hindgut, were studied using OCT imaging. Two-dimensional and three-dimensional OCT images, used in conjunction with histological images, proved useful for anatomical analysis of mosquito specimens. By presenting this work as an initial study, we demonstrate the applicability of OCT for future mosquito-related entomological research, and also in identifying changes in mosquito anatomical structure.

The feasibility of using the bio-photonic imaging technique to assess symptoms of circular leaf spot (CLS) disease in Diospyros kaki (persimmon) leaf samples was investigated. Leaf samples were selected from persimmon plantations and were categorized into three groups: healthy leaf samples, infected leaf samples, and healthy-looking leaf samples from infected trees. Visually non-identifiable reduction of the palisade parenchyma cell layer thickness is the main initial symptom, which occurs at the initial stage of the disease. Therefore, we established a non-destructive bio-photonic inspection method using a 1310 nm swept source optical coherence tomography (SS-OCT) system. These results confirm that this method is able to identify morphological differences between healthy leaves from infected trees and leaves from healthy and infected trees. In addition, this method has the potential to generate significant cost savings and good control of CLS disease in persimmon fields.