Search

Rural electrification is a crucial step for the socio-economic development of isolated communities. Decentralized power generation, typically more favorable for renewable energies, requires an accurate analysis of the different electrification options, whose convenience depends on multiple factors. The application of Geographical Information Systems (GISs) to energy planning allows the assessment at a local level, considering the variability and demand distribution of spatial resources. This work introduces IntiGIS-local, a GIS-based model implemented in the ArcGIS environment, designed to calculate the levelized energy cost (LEC) for different electrification options. The model allows the comparison between three power generation alternatives: solar system, diesel generator set and solar–diesel hybrid system. Configurations are adjustable through input variables, with a special focus on the confrontation between individual systems and microgrids. The objective is to provide an adequate groundwork for developing a decision-making tool to assess diverse rural electrification options in future studies. The model IntiGIS-local is tested in the case study of the Guasasa community (Cuba).

This paper takes a cursory look at the problem of inadequate power supply in the rural healthcare centres of a developing country, specifically Nigeria, and proffers strategies to address this issue through the design of hybrid renewable energy systems combined with the existing unreliable grid in order to meet the healthcare load demand, thus ensuring higher reliability of available energy sources. The simulations, analysis and results presented in this paper are based on meteorological data and the load profiles of six selected locations in Nigeria, using which hybrid grid-connected systems integrating diesel, solar and wind energy sources are designed with configurations to give optimum output. The optimised design configurations in the considered case study, Ejioku, Okuru-Ama, Damare-Polo, Agbalaenyi, Kadassaka and Doso, produce very low energy costs of of 0.0791 $/kWh, 0.115 $/kWh, 0.0874 $/kWh, 0.0754 $/kWh, 0.0667 $/kWh and 0.0588 $/kWh, respectively, leveraging solar and wind energy sources which make higher percentage contributions at all sites. The load-following-dispatch strategy is adopted at all sites, ensuring that at every point in time, there is sufficient power to meet the needs of the healthcare centres. Further works on this topic could consider other strategies to optimise general energy usage on the demand side.

Given the constraints associated with grid expansion costs, limited access to reliable electricity, and priorities in addressing the climate agenda and Sustainable Development Goals in low-income countries, microgrids and off-grid solar projects represent a viable solution for rural electrification. This type of solution has the advantage of being less expensive than conventional technologies, is rapidly scalable, affordable, environmentally sustainable, and can play a critical role in empowering rural communities. In this context, this study proposed a spatial framework for off-grid solar energy planning based on a Geographical Information System and Boolean logic, Fuzzy logic, and Analytic Hierarchy Process Multicriteria Decision-Making methods. The results of the applied methodology show that the selection of optimal locations for off-grid solar photovoltaic microgrid projects in Mozambique is significantly influenced by the following order of criteria: climatology, orography, technical and location, social, and institutional criteria. Geographically, about 49% or 344,664.36 km2 of the total study area is initially suitable for an off-grid solar photovoltaic microgrid project; 4% is low suitable, 14% is moderately suitable, 18% is suitable, and 13% is highly suitable. However, 51% of the ranked areas fall into the not feasible and restricted areas, mainly in conservation areas, protected areas, and areas at high risk of flooding and cyclones, covering a total of 387,005.5 km2 within the study area. In general, the approach helps to reduce uncertainty and increase flexibility to identify appropriate sites and strengthen indicators of sustainable development impacts of decentralized rural electrification.

This research presents the findings of an evaluation of off-grid photovoltaic (PV) systems and their sustainability models in Colombia within the “Evaluation of Isolated Photovoltaic Systems and Their Sustainability Models” project supported by the Global Environment Fund (GEF). It involves the analysis of primary and secondary information on the photovoltaic energy projects for rural electrification in this country. Part of the information was obtained through interviews with different stakeholders who work in solar electrification in non-interconnected zones (NIZ), covering rural and island contexts. It was complemented by a comparative analysis of international projects implemented in Latin America. The results are shown as lessons learned, with a SWOT (strengths, weaknesses, opportunities, and threats) study representing the current situation of rural electrification with PV technology as perceived and describing the opportunities for the improvement of rural electrification strategies based on the successful experiences in the region. This research offers a comprehensive overview of how Colombian electrification could be led to address the last mile gap, integrating a solid sustainable perspective for the long-term view and ensuring community involvement towards a just energy transition. Therefore, this study proposes a series of guidelines to support those public policies that foster access to energy in the rural non-interconnected zones of Colombia.

The availability of sustainable, efficient electricity access is critical for rural communities as it can facilitate economic development and improve the quality of life for residents. Isolated microgrids can provide a solution for rural electrification, as they can generate electricity from local renewable energy sources and can operate independently from the central grid. Residential load scheduling is also an important aspect of energy management in isolated microgrids. However, effective management of the microgrid’s energy resources and load scheduling is essential for ensuring the reliability and cost-effectiveness of the system. To cope with the stochastic nature of RERs, the idea of an optimal energy management system (EMS) with a local energy transactive market (LETM) in an isolated multi-microgrid system is proposed in this work. Nature-inspired algorithms such as JAYA (Sanskrit word meaning victory) and teaching–learning based optimization algorithm (TLBO) can get stuck in local optima, thus reducing the effectiveness of EMS. For this purpose, a modified hybrid version of the JAYA and TLBO algorithm, namely, the modified JAYA learning-based optimization (MJLBO), is proposed in this work. The prosumers can sell their surplus power or buy power to meet their load demand from LETM enabling a higher load serving as compared to a single isolated microgrid with multi-objectives, resulting in a reduced electricity bill, increased revenue, peak-average ratio, and user discomfort. The proposed system is evaluated against three other algorithms TLBO, JAYA, and JAYA learning-based optimization (JLBO). The result of this work shows that MJLBO outperforms other algorithms in achieving the best numerical value for all objectives. The simulation results validate that MJLBO achieves a peak-to-average ratio (PAR) reduction of 65.38% while there is a PAR reduction of 51.4%, 52.53%, and 51.2% for TLBO, JLBO, and JAYA as compared to the unscheduled load.

Microgrids using renewable energy sources play an important role in providing universal electricity access in rural areas in the Global South. Current methods of system dimensioning rely on stochastic load profile modeling, which has limitations in microgrids with industrial consumers due to high demand side uncertainties. In this paper, we propose an alternative approach considering demand side management during system design which we implemented using a genetic scheduling algorithm. The developed method is applied to a test case system on Idjwi Island, Democratic Republic of the Congo (DRC), which is to be powered by a micro hydropower plant (MHP) in combination with a photovoltaic (PV) system and a battery energy storage system (BESS). The results show that the increased flexibility of industrial consumers can significantly reduce the cost of electricity. Most importantly, the presented method quantifies the trade-off between electricity cost and consumer flexibility. This gives local stakeholders the ability to make an informed compromise and design an off-grid system that covers their electricity needs in the most cost-efficient way.

The rural electrification of Sub-Saharan Africa and South-East Asia is crucial to end the energy poverty in which around 1 billion people are trapped. Swarm electrification, i.e., the progressive building of decentralized and decarbonized electric infrastructure in a bottom-up manner, tackles rural electrification challenges by quickly providing modern and reliable electricity services to unelectrified communities while fostering local socio-economic development. This paper follows the technological approach of this electrification model and presents the development of a DC microgrid with decentralized production and storage suitable for rural electrification. This DC microgrid aims at interconnecting nanogrids, small collective autonomous power units composed of a solar panel and a lead–acid battery for 4 to 6 households, to increase the electrical services brought to the community and enhance the economic sustainability of this rural electrification model. The design of the proposed microgrid as well as its control algorithm are thoroughly addressed and tested from software simulations and experimental testing to field deployment in Madagascar. Extensive software, experimental and field-tests results are illustrated, and the microgrid design feedback is given. This paper overall validates the proper operation of the proposed microgrid, confirming the technical feasibility of the swarm electrification approach.

Due to the significance of environmental aspects, the modeling of hybrid systems should be performed with the lowest cost and environmental pollution. Therefore, an effective and optimum sizing method can ensure acceptable performance. This paper implements a “technique for order performance by similarity to the ideal solution” (TOPSIS) method combined with the “analytic hierarchy process (AHP)” method to size a standalone system based on techno-economic parameters. For this reason, a survey was conducted to collect local load data on Monpura Island, located in Bhola, Bangladesh. Visible and design faults of the existing PV/diesel mini-grid have also been identified. Five alternative hybrid configurations have been considered as to evaluate the best optimum system. Two economic and one environmental criterion was used to size the system. Two experts specialized in energy systems evaluated the criteria and proposed the suitable system. Battery, wind and PV capital cost multipliers have been considered as to perform sensitivity analysis. According to techno-economic analysis and expert opinion, PV/biogas/wind has been found to be the most appropriate system among these configurations. The system has a cost of electricity (COE) of 0.691 (USD/kWh) and emits only 4.43 kg of CO2 per year. The net present cost of the proposed system is 18% lower than the existing microgrid, and the model has lower emissions due to high renewable penetration. It was also found that integrating wind can significantly reduce battery capacity in the mini-grid. The proposed system consumes 34% less batteries than the existing system. Implementing this optimum system can result in greater benefit to the local people.

Rural areas in developing countries have the highest concentrations of unelectrified communities. There is a clear link between electricity consumption and the Human Development Index, as highlighted by the 7th Development Goal of the United Nations. Estimating the energy needs of the previously nonelectrified population is imprecise when designing rural electrification projects. Indeed, daily energy demand and peak power assessments are complex, since these values must be valid over the project’s lifetime, while tight budgets do not allow for the systems to be oversized. In order to assist project promoters, this study proposes a fuzzy mixed integer linear programming model (FMILP) for the design of wind–PV rural electrification systems including uncertainty in the demand requirements. Two different FMILP approaches were developed that maximized the minimum or the average satisfaction of the users. Next, the FMILP approaches were applied to six Latin American communities from three countries. Compared with the deterministic MILP (where the energy and peak power needs are considered as specific values), the FMILP results achieved a better balance between the project cost and the users’ satisfaction regarding the energy and peak power supplied. Regarding the two approaches, maximizing the users’ minimum satisfaction obtained globally better solutions.

In this article, we explore the sustainability potential of an alternative commons-based mode of production called cosmolocalism. Cosmolocal production combines global knowledge production with local physical production. Such a production mode has been applied across the globe for locally manufacturing small wind turbines (SWTs) for rural electrification. We assess the sustainability of such cosmolocal SWTs in a case study of electrifying a rural community in Ethiopia. In this context, the life cycles of five SWT alternatives have been compared, ranging from conventional industrially produced turbines to open-source locally manufactured and maintained ones. Our case study indicates that the local manufacturing and maintenance of SWTs offer significant advantages and may redeem small wind turbines as a sustainable component for rural electrification. Specifically, the fully cosmolocal alternative (A1) performs better than any other alternative in technical, environmental, and social criteria, while it is close to the best-performing alternative with regard to economic objectives. For this solution to be implemented, the institutional burden cannot be neglected, but can rather be considered a sine qua non condition for locally manufactured and maintained SWTs. A set of generic institutional interventions to create favourable conditions for cosmolocal production is proposed, which needs to be elaborated in a context-specific manner.

Increasing Uganda’s low electrification rate is one of the country’s major challenges. Power service is essential to achieve socioeconomic development and poverty reduction, especially in rural areas. This paper shows the advantages of using an integrated (grid and off-grid) electrification model with high geospatial, temporal, and customer-class granularity as the Reference Electrification Model (REM). In universal electrification strategies, REM will help better ascertain the role of minigrids, jointly with grid extension, solar kits, and stand-alone systems. REM has been applied to the Southern Service Territory (SST) to determine the least-cost mix of electrification modes—grid extension, off-grid minigrids, and standalone systems—that satisfies the hourly demand requirements of each customer—residential, commercial, or industrial—considering its individual location. REM incorporates the existing grid layout, the hourly solar local profile, and the catalogs of actual components for network and generation designs. The paper shows that minigrids can provide grid-like service at a significantly lower cost in many circumstances and to a considerable extent. Therefore, minigrid strategies should play a more important role in electrification planning, both transitorily and on a permanent basis, particularly when the central grid suffers from frequent and prolonged blackouts.

Access to electricity for the rural and indigenous population of Ecuador’s Amazon Region (RAE) is considered a critical issue by the national authorities. The RAE is an isolated zone with communities scattered throughout the rainforest, where the expansion of the national grid is not a viable option. Therefore, autonomous electrification systems based on solar energy constitute an important solution, allowing the development of indigenous populations. This work proposes a tool for the design of stand-alone rural electrification systems based on photovoltaic technologies, including both microgrid or individual supply configurations. This tool is formulated as a Mixed Integer Linear Programming model including economic, technical and social aspects. This approach is used to design electrification systems (equipment location and sizing, microgrid configurations) in three real communities of the RAE. The results highlight the benefits of the developed tool and provide guidelines regarding RAE’s electrification.

As it emerges from the literature, electricity access in rural contexts is deeply intertwined with socioeconomic dynamics. However, the advent of a reliable and sufficient source of electricity is not the sole driver that might contribute to local development. Indeed, complementary activities might have a crucial role in sustaining the development of rural communities as well as the electricity access. The current research addresses the lack of counterfactual scenarios in which the impact of complementary activities on electrification projects can be investigated. The authors introduce the case study of Matembwe village, a rural community in the Njombe region of Tanzania. The data collection includes the electricity consumption, number of electricity connections, and number of income-generating activities in a timespan ranging from 1989 to 2015. The analysis is based on system dynamics. The study considers different scenarios representing the dynamics related to the following complementary actions: access to market measures, access to credit measures, and access to usable skills. On the one hand, the study reveals that the effectiveness of the considered complementary actions is limited except from the access to microcredit which fosters an increase in electricity connections by 17%. On the other hand, both access to microcredit and the starting up of a local cooperative by CEFA Onlus that reinvests its profits in the local market impact the socio-economic dimension by 69% and 22%, respectively.

Universal access to energy is a global challenge for sustainable development that requires granting last-mile access to energy services to rural and isolated communities. However, achieving access is not sufficient: it must be done affordably, reliably and with an adequate quality. Universal access to energy goes beyond the mere selection of a technical solution or infrastructure; it demands being able to design management models for projects aiming to guarantee that households may access energy services in a sustainable way. This study analyzes the main elements (i.e., governance, technological and business models) of management models in universal access to energy projects and their impact on the different dimensions of sustainability (i.e., social, environmental, and economic). The study then presents three case studies of rural electrification projects having different configurations of the management model, with special focus on the differences in the business model, and it analyzes their outcomes from a sustainability perspective. The analysis of the three case studies suggests that the choice of the business model is key to ensuring sustainability, with fee-for-service models giving the best results. The analysis also highlights the importance of collaboration and involvement of the communities in projects engaging multiple agents with different roles.

Design strategies for achieving reliable, affordable, and clean electricity are crucial for energy sustainability. Attaining it requires managing the three core factors (TCF) of the energy trilemma (ET) to increase reliability (energy equity), minimize the levelized cost of electricity (LCOE) (energy equity), and avoid potential CO2 emission (environmental sustainability) simultaneously. This paper aims to present a design strategy for the hybrid energy system microgrid (HESM) model, consisting of a distributed rooftop solar PV (DRSP), battery, and diesel-generator to meet the increasing demand while balancing the TCF of the ET. The design strategy was applied in a cluster of 11 households in Gilutongan Island, Cebu, Philippines, where there is no open land space for a solar PV microgrid system. This study used PVSyst and HOMER Pro software to perform the techno-enviro-economic (TEE) analysis to select all feasible system configurations (FSCs). To identify the optimal FSC, a scoring mechanism that considers the LCOE based on the 5% household electricity expense limit, the 5% unmet load fraction, and the renewable penetration fraction was used. Results show that the optimal system requires an average of 32.2% excess energy from DRSP to balance the TCF of the ET based on the energy demand considered. Thus, planning when energy demand increases is vital to map the next appropriate steps toward sustainable energy transition. Overall, the obtained results can support project developers and policymakers to make informed decisions in balancing the ET from various trade-offs of energy systems.

Universal access to electricity is a crucial challenge in many developing countries. Establishing the electrification agenda of an underserved region is a complicated task where computer models play a critical role in calculating geospatial plans that efficiently allocate resources. Such plans should include—among other things—reasonable estimations of the designs and economic costs of standalone systems, mini-grids, and grid extensions. This implies that computer models need to estimate the network cost for many potential mini-grids. To that end, most planning tools apply quick rules of thumb or geometric methods that ignore power flows and electric constraints, which play a significant role in network designs. This paper presents a methodology that rapidly estimates any low-voltage mini-grid network cost without neglecting the impact of electrical feasibility in such cost. We present a case study where we evaluate our method in terms of accuracy and computation time. We also compare our method with a quick estimation similar to the ones most regional planning tools apply, showing the effectiveness of our method.

Techno-economic viability assessments of rural electrification projects, especially those that integrate renewable energy technologies, typically look at system design optimization that would yield the most favorable cost and investment scenarios. However, the true viability of these projects relies more importantly on their impact to the rural communities while ensuring positive financial returns to the project developers. This paper aims to expand the viability assessment of electrification projects in off-grid island communities in order to mainly address the apparently opposing needs of the major stakeholders at play by developing a viability assessment framework considering the techno-economic dimensions as well as the socio-economic impacts to the consumers. The analysis follows a two-phase approach, where system design optimization and financial impact calculations are done in the first phase and the socio-economic viability is accomplished in the second phase. Results suggest that high capital investment for renewable energy has a better pay-off when there is higher demand for electricity. On the other hand, consumers also tend to receive higher economic benefit as they consume more electricity. However, the low income of rural consumers strains their capacity to pay, which necessitates their engagement in more economically-productive uses of electricity. The viability assessment framework can be a useful tool for both investors and consumers as this provides important insights which can be translated into impactful interventions that may include government support through improved policy implementation that can positively sustain electricity access in off-grid communities through renewable energy.

Hybrid microgrids constitute a promising solution for filling the electricity access gap that currently exists in rural areas; however, there is still relatively little information about their reliability and costs based on measured data in real working conditions. This article analyzes data obtained from the operation of a 9 kW hybrid microgrid in the fishermen’s cove of Laguna Grande, Paracas, in the Ica region of Perú, which has been running for 5 years. This microgrid has been equipped with data acquisition systems that measure and register wind speed, solar radiation, temperatures, and all the relevant electric parameters. Battery dynamics considerations are used to determine the depth of discharge in a real-time operative situation. The collected data are used to optimize the design using the specialized software HOMER, incorporating state-of-the-art technology and costs as a possible system upgrade. This work aims to contribute to better understanding the behavior of hybrid rural microgrids using data collected under field conditions, analyzing their reliability, costs, and corresponding sensitivity to battery size as well as solar and wind installed power, as a complement to a majority of studies based on simulations.

The design of reliable and sustainable rural electrification systems relies on accurate prediction of the electrical load. This paper evaluates the current methods for load estimation and proposes an improved approach for load estimation for off-grid unelectrified rural communities that yields more accurate estimates. Improved accuracy is mainly due to better modelling of the influence of customer habits and gender on the estimated current and future load using the Markov chain process. A program was developed using MATLAB software to generate load profiles. The results show that gender considerations have a significant impact on load profiles and that the Markov chain process can suitably be used to determine year-to-year load profiles by incorporating the effect of changes in customer habits on the estimated load. The results from the case study on energy consumption in rural community households showed an increase in average daily consumption when gender was considered during load estimation. The peak consumption when gender was considered was about 50% higher than the value for when gender was not considered.

Achieving universal electricity access is a challenging goal for the governments of developing countries such as Ethiopia. Extending the national grid to the remotely located, scattered, and island populations demands a huge investment. This paper aims to show the techno-economic feasibility of minigrid renewable energy system to electrify Kibran Gabriel island in Ethiopia, through the execution of simulation, optimization and sensitivity analysis using Hybrid Optimization Models for Energy Resources (HOMER Pro) software. The minigrid systems were compared with both diesel generation (DG) and grid extension systems. The hybrid photovoltaic (PV)/DG/battery system is more economically feasible compared with other minigrid systems, and the best cost-effective option is the one including load flow (LF) strategy with 25 kW of PV, 10 kW of DG, 40 kWh of battery, and 5 kW of bi-directional convertor. The optimal PV/DG/Battery system, having levelized cost of energy (COE) of USD 0.175/kWh, net present cost (NPC) of USD 119,139 and renewable fraction (RF) of 86.4%, reduces the pollutant emissions by 33,102 kg/yr compared with the stand-alone DG system. The optimal minigrid sensitivity to the variations in global horizontal irradiance (GHI), diesel price and load consumption were considered in the sensitivity analysis, and the result shows that the system will operate reasonably well.

This paper lays out a methodology that could be used by mini-grid developers to assess the design readiness and future design requirement to accommodate electric cooking (eCook). While mini-grids in developing countries continue to grow in popularity, typically their designs are not yet sufficiently developed to accommodate large power appliances. Moving towards clean cooking using electricity will cause technical risks for mini-grids in terms of voltage drop, voltage unbalances and capacity shortage. In this paper, these parameters are studied on a mini-grid network modeled in OpenDSS/MATLAB as a simulation platform, where the selected mini-grid topology is hub and spoke. Two network studies are considered, the first investigates the limitations of the mini-grid in terms of the generation capacity available to supply the demand for different levels of eCook penetration, while the second focuses on the network constraints for different eCook penetrations. In general, the results show that voltage drop and voltage imbalance issues can be reasonably and affordably addressed by using cables of a larger cross-sectional area. The main issue prohibiting higher penetrations of eCook centre on generation capacity requirements, which led to a techno-economic analysis being conducted to assess future mini-grid sizes as well as targeting economic and environmental objectives and meeting the overall demand on a generically representative mini-grid in a rural region in East Africa. The discussion section in this paper highlights the main barriers to the accommodation of eCook on rural mini-grids and presents suggestions for future work that addresses new design specifications for the next generation of eCook mini-grids.

Remote rural populations do not often have the luxury of viable multisource electricity generation systems. Considering fossil fuels for remote populated areas is not often a viable option due to the fuel transportation costs and the population’s socioeconomic status. Extending the grid is often economically prohibitive. This paper proposes possible ways in which Mali could increase the rate of population with access to electricity by 2050 using Low Emission Analysis Platform (LEAP) and geographical information tools. The current energy situation is assessed, and multiple demand and supply scenarios are created to find the most viable option in environmental and economic dimensions. A minimum of 50% reduction of biomass consumption in the residential sector and a maximum of 71% was achieved through the combination of grid extension and decentralized solar PV. Solar PV becomes the preferable option when enough time for the effects of electricity on income is given. When these effects are not present, solar PV is still a better option, as the amount of biomass replaced with electricity is reduced.

Electrification plays a crucial role in the advancement of rural communities but establishing its impact to the communities’ sustainable development remains a challenge. This paper presents a pragmatic framework for assessing how electrification affects sustainable development at the grassroots level with eight indicators in the economic, technical, social, and environmental dimensions highlighted. An exploratory factor analysis approach is applied to determine how these dimensions contribute to the community’s overall sustainable development. The framework is applied in two islands in the Philippines of less than 500 households and varying electrification levels. Results indicate that Gilutongan Island, which has less than 24-h electricity access rarely find productive uses of electricity and still make use of conventional fuels for lighting. Meanwhile, Cobrador Island, which has 24-h access see improvements in almost all aspects, although they are slightly burdened by the unaffordability of tariffs. This means that islands with limited hours for electricity access rarely experience positive impacts to their socioeconomic development while the opposite is true for islands with longer access. The framework can be a useful tool for decision- and policy-makers to assess electrification in rural off-grid communities and to streamline efforts in helping these communities achieve sustainable development.

Decentralized electricity systems based on variable renewable energy (VRE) sources such as wind power can provide affordable, dependable, and modern energy in a manner consistent with the Paris Agreement. Such sources are, however, sensitive to extreme values of climatic factors—an issue that may jeopardize power system reliability. As a resource-rich region with a high proportion of rural population without access to electricity, Africa has been of wide interest in studies on VRE-based electricity generation. Nevertheless, there is still a major gap in our continent-scale understanding of the wind power potential and its variability at different time scales, as well as the influence of low-wind-resource periods in Africa. Using ERA5 hourly estimates of wind speed, the present study investigated the adequacy and temporal variability of local wind power potential across Africa over the 2000–2017 period. The results indicated that design requirements of wind power systems are, on average, fulfilled in regions in the North, South, and Horn of Africa at different time scales. However, low-resource periods were shown to have a significant impact on the reliability of wind power potential in the majority of the continent. Demand flexibility can reduce the severity of these periods and help to achieve design requirements.

In the last ten years, there has been a progressive improvement in rural electrification indexes in developing countries, and renewable energies are progressively being integrated into electrification programs. In Cuba, the government has set a target of 700 MW in solar photovoltaic energy by 2030, including rural electrification and off-grid systems. Within this framework, 10,000 modular systems of 300 Wp are being installed in isolated communities. Nowadays, previously diesel-electrified settlements are migrating into renewable energy technologies projects in rural Cuba. The objective of this research is to evaluate the sustainability of these changes in order to identify the implications for other developing countries, taking four different dimensions into account: environmental, technical, socioeconomic, and institutional. For this purpose, the rural communities of Yaguá (diesel-based) and Río Abajo (solar-based) in the province of Sancti Spiritus are visited and studied. Results show that the institutional dimension of sustainability is positive thanks to improvements in energy security and promotion of the Cuban national plan goals. Moreover, results confirm that the energy transition from diesel-based to solar PV is environmentally sustainable in Cuba, but improvements are still necessary in the power capacity of solar modules to strengthen the socioeconomic and technical dimensions.

The scientific community is active in developing new models and methods to help reach the ambitious target set by UN SDGs7: universal access to electricity by 2030. Efficient planning of distribution networks is a complex and multivariate task, which is usually split into multiple subproblems to reduce the number of variables. The present work addresses the problem of optimal secondary substation siting, by means of different clustering techniques. In contrast with the majority of approaches found in the literature, which are devoted to the planning of MV grids in already electrified urban areas, this work focuses on greenfield planning in rural areas. K-means algorithm, hierarchical agglomerative clustering, and a method based on optimal weighted tree partitioning are adapted to the problem and run on two real case studies, with different population densities. The algorithms are compared in terms of different indicators useful to assess the feasibility of the solutions found. The algorithms have proven to be effective in addressing some of the crucial aspects of substations siting and to constitute relevant improvements to the classic K-means approach found in the literature. However, it is found that it is very challenging to conjugate an acceptable geographical span of the area served by a single substation with a substation power high enough to justify the installation when the load density is very low. In other words, well known standards adopted in industrialized countries do not fit with developing countries’ requirements.

The current electrification status in West African countries presents rural electrification rates below 40%, national grid losses above 39% with frequent disruptions, and electricity prices averaging $0.35/kWh, up to national values of $0.66/kWh. With this, off-grid systems have gained great attention during the last decade as energy solutions; especially solar home systems (SHS) and mini grids. Nowadays, 385 mini grids with a power of near 30 MW are operating in West Africa, with 95% based on PV. Since 2019, result-based tenders with international aid funding—more effective than previous competitive tenders—seek to install at least 317 new mini grids in Togo, 250 in Nigeria, 100 in Burkina Faso, and two in Mali. Besides, the market for mini-grid energy access start-ups grew from $19 million in 2013 to $339 million in 2018. Despite this recent development in West Africa, research and data for mini grids in this region is scarce, and it is mostly approached from the technological side, with a striking lack of information regarding the social impact. This work tries to describe the present status of research and current operating installations, as well as the main challenges for future development of off grid mini grids in West Africa, which pose as the missing link between SHS and grid extension.

The present work investigates the techno-economic solution that can address the problem of rural electrification. To maintain a continuous power supply to this village area, a grid-connected microgrid system was designed that consists of solar photovoltaic (SPV) and battery energy storage systems (BESS). The recently introduced multi-strategy fusion artificial bee colony (MFABC) algorithm was hybridized with the simulated annealing approach and is referred to as the MFABC+ algorithm. This was employed to determine the optimal sizing of different components comprising the integrated system as well as to maximize the techno-economic objectives. For validation, the simulation results obtained by the MFABC+ algorithm are compared with the results obtained using HOMER software, the particle swarm optimization algorithms and the original MFABC algorithm. It was revealed that the MFABC+ algorithm has a better convergence rate and the potential ability to provide compromising results in comparison to these existing optimization tools. It was also discovered through the comprehensive evaluation that the proposed system has the potential capability to meet the electricity demand of the village for 24 × 7 at the lowest levelized cost of electricity.

Solar hybrid mini-grid systems possess the potential to substantially support electrification in sub-Saharan Africa. While their technical reliability has been proven, their financial viability is achieved only by heavy subsidization as of now. Due to the growing importance of results-based financing, we ask whether newly developed business models leveraging on the value added of electricity supply in rural areas (such as the KeyMaker Model) bare the potential to substantially reduce amount of grants required to finance the initial capital investment and thus contribute to a sustainable form of development. The principle of the KeyMaker Model is based on utilizing the locally supplied mini-grid electricity to establish a local agro-processing project, the revenues of which are an additional income stream for the mini-grid operator, while the project creates an end-market for the local farmers to sell their produce. We have developed two scenarios (without and with KeyMaker Model) for four rural villages in Nigeria as a case study to scientifically assess the potential of KeyMaker Models. We simulated and optimized the mini-grid systems using the software tool HOMER. We then assessed their financial viability. Our analysis demonstrates grant finance requirements ranging from 82% to 99% of the total investment for the base-case mini-grid projects without consideration of the KeyMaker Model. We find that a well-selected KeyMaker Model such as cocoa bean processing reduced the grant requirement by 68 percentage points, while processes based on maize, palm oil and cassava processing achieved reductions of 36, 26 and 8 percentage points, respectively. Hence, we conclude that the value added by the introduction of new local business models bares the potential to reduce grant requirements for the socially and economically necessary electrification across the Global South.

Energy system models for off-grid systems usually tend to focus solely on the provision of electricity for powering simple appliances, thus neglecting more energy-intensive and critical needs, such as water heating. The adoption of a Multi-Energy System (MES) perspective would allow us not only to provide comprehensive solutions addressing all types of energy demand, but also to exploit synergies between the electric and thermal sectors. To this end, we expand an existing open-source micro-grid optimization model with a complementary thermal model. Results show how the latter achieves optimal solutions that are otherwise restricted, allowing for a reduction in the Levelized Cost of Energy (LCOE) of 59% compared to a conventional microgrid, and an increase of reliance on renewable sources of 70%.

Under the Sustainable Development Goals (SDGs), the world has pledged to “leaving no one behind”. Responding to goal No. 7 on the agenda, efforts to provide modern energy to all the world population must be pushed forward. This is important because electrification in the rural area can indirectly support opportunities for social and economic development resulting in an acceleration of the eradication of poverty. The research goal of this study is to contribute insights about the scale of energy demand in unelectrified villages in the Southeast Asian countries and to discuss some factors that might influence the energy demand growth. This is done by making projections based on surveys and interviews, including a time-use survey, in three off-grid villages located in Myanmar, Indonesia, and Laos. Our analysis presented the living condition, highlight the types of energy sources, how, and in what rhythms people use energy on a daily basis in those villages. The demands in each case study villages were then projected based on several constructed scenarios. It was found that the factors of household size, proximity to the city, climate, and topography may influence the present and future growth of energy demands in the villages. The estimated energy demand may be useful for project managers to design a pilot off-grid energy system project in a similar environment and pointed out important factors to consider when formulating off-grid energy policies in the region.

Since 2003, Brazil has striven to provide energy access to all, in rural areas, in an effort to economically empower the communities. Unpacking fuel stacking behaviour can shed light onto the speed of transition toward the exclusive use of advanced fuel types. This paper presents findings from surveys that were carried out with 14 non-electrified communities in a rural area of Rio Negro, Amazonas State, Brazil. We identify the fuel choice determinants in these communities using a multinomial logistic regression model and more generally discuss the validity and robustness of such models in the context of statistical validation and evaluation metrics. Specifically for the Amazonas communities considered in this study, the research showed that the fuel choice determinants are the age of household, the number of people at meals each day, the number of meals daily, the community, education of the household head, and the income level of the household. Moreover, given the Brazilian policies related to energy and sustainability, this region is not likely to reach the Sustainable Development Goals proposed by United Nations for 2030.

Despite the general agreement about the benefits that electrification brings to well-being, few studies have concentrated on the actual effects of electrification on the diverse non-economic dimensions of quality of life (QoL). In a multi-disciplinary and cross-institutional effort, a group of natural and social scientists have studied three electrification schemes (grid extension, centralised hybrid, and solar home systems) in four rural villages in Malaysia, Cambodia, and Myanmar. Using a novel approach with scales on several QoL measures (self-reported QoL and five QoL sub-domains; psychological, physical, social, and economic well-being; occupations; and total active time), this article presents an analysis of the effects of rural electrification on human well-being. With original data surveyed in the villages through a baseline prior to electrification and an endpoint several months after, the effects were examined through suitable statistical methods. Overall, we confirmed a positive effect of electrification in self-reported QoL levels as well as psychological, physical, and social well-being. There was, however, a certain reduction recorded in economic well-being. In the sub-domains of QoL, there were no changes after electrification in satisfaction levels concerning time use, time spent alone, housing, and personal safety, but a positive effect on satisfaction levels was observed in cooking. Finally, in terms of occupation, we observed no changes in the total hours dedicated to work and no prolonged active time on usual activities in the household. The findings provide support to the hypothesis of a positive effect on general QoL from electrification, but also suggest more precisely that, for specific QoL sub-domains, the effect might not necessarily exist, or in fact, may be negative. The article concludes by discussing differences determined by cultural aspects and technological limitations in each of the systems under study.

Off-grid power systems based on photovoltaic and battery energy storage systems are becoming a solution of great interest for rural electrification. The storage system is one of the most crucial components since inappropriate design can affect reliability and final costs. Therefore, it is necessary to adopt reliable models able to realistically reproduce the working condition of the application. In this paper, different models of lithium-ion battery are considered in the design process of a microgrid. Two modeling approaches (analytical and electrical) are developed based on experimental measurements. The derived models have been integrated in a methodology for the robust design of off-grid electric power systems which has been implemented in a MATLAB-based computational tool named Poli.NRG (POLItecnico di Milano—Network Robust desiGn). The procedure has been applied to a real-life case study to compare the different battery energy storage system models and to show how they impact on the microgrid design.

Energy access remains a challenge for many countries, as recognized by sustainable development goal 7 of the United Nations Development Programme. Although the Myanmar government has set a target of 100% electrification by 2030, less than half of the households are currently connected to the national grid. To expedite electrification, decentralized approaches should be considered. Mini-grids are an effective alternative that can fill the gap between a solar home system and the national grid; however, many of the existing mini-grids in Myanmar are powered by diesel generators. Diesel fuel is significantly more expensive in rural areas than in urban areas due to high transportation costs. Although mini-grids powered by solar photovoltaics and batteries are cost-competitive with diesel generators, the deployment of renewable energy-based mini-grids is slow. In this study, we analyzed the barriers to mini-grid deployment and prioritized the barriers. We conducted a questionnaire survey with stakeholders using the analytic hierarchy process to identify the prioritization of each barrier factor. The K-means clustering method was used to determine tendencies and showed that there was no single, dominant solution. Our results confirm the difficulty of mini-grid deployment and suggest multi-pronged approaches that go beyond economic considerations.

Throughout the developing world, most remote and isolated communities are still without reliable electricity in the twenty-first century, and this is primarily due to the high cost of grid extensions. In communities that do have electricity, they usually rely on diesel generators, though these have high operating and maintenance costs, while also polluting the environment. A more sustainable approach is to deploy microgrids, however, microgrids have a high upfront cost, which is a major obstacle, especially in rural areas of developing countries. This study aims to investigate the parameters that can be influenced to make microgrids more economical for rural electrification. Through sensitivity analyses, five key policy and technology parameters were identified. They include real discount rates, diesel prices, grants, battery chemistry, and operating strategies. The system was then redesigned using scenarios formulated by varying these parameters. Results show that the parameters affect the configuration, levelized cost of energy (LCOE), renewable energy penetration (REP), and pollutant emissions. The study uses three remote communities in the Beni Department of Bolivia as case studies. MDSTool was used as a modeling framework to design the microgrids. The unique insights and lessons learned during the design process are discussed at length because these may be valuable for future microgrid designs for remote communities.

Nearly 840 million people still lack access to electricity, while over a billion more have an unreliable electricity connection. In this article, the three different electrification pathways—grid extension, centralized microgrids, and standalone solar-based solutions, such as pico-solar and solar home systems (SHS)—are critically examined while understanding their relative merits and demerits. Grid extension can provide broad scale access at low levelized costs but requires a certain electricity demand threshold and population density to justify investments. To a lesser extent, centralized (off-grid) microgrids also require a minimum demand threshold and knowledge of the electricity demand. Solar-based solutions are the main focus in terms of off-grid electrification in this article, given the equatorial/tropical latitudes of the un(der-)electrified regions. In recent times, decentralized solar-based off-grid solutions, such as pico-solar and SHS, have shown the highest adoption rates and promising impetus with respect to basic lighting and electricity for powering small appliances. However, the burning question is—from lighting a million to empowering a billion—can solar home systems get us there?The two main roadblocks for SHS are discussed, and the requirements from the ideal electrification pathway are introduced. A bottom-up, interconnected SHS-based electrification pathway is proposed as the missing link among the present electrification pathways.

Many people in African countries lack access to sufficient electricity supply due to missing infrastructure of the centralized conventional power generation system. In order to provide electricity to a wider part of the population, it is necessary to exploit the vast renewable resources in African countries. Therefore, this paper scrutinizes the economic advantages of photovoltaic-based hybrid systems over fossil fuel-based power generation. A simulation model is applied in order to calculate the cost advantage of hybrid systems compared to diesel-only systems for the entire continent on a long term basis by applying two scenarios: one based on world market diesel prices and the other one based on national diesel prices. The results indicate that average power generation costs per country can be reduced by up to 0.11 €/kWh considering world market diesel prices and by up to 0.48 €/kWh considering national diesel prices. Furthermore, the effect of diesel fuel subsidies and taxes on the renewable energy potential and the respective savings are examined. These findings may ameliorate the policy development according to fossil fuel subsidies and taxes and demonstrate the advantages of decentralized renewable hybrid systems especially in rural areas of Africa.

Today, 992 million people still do not have access to electricity globally. Most live in rural areas of the developing world. In 2018, the electrification rate for sub-Saharan Africa was only 27%. Furthermore, off-grid systems are projected to provide 65% of the newly electrified population in sub-Saharan Africa. Current estimations show that the average connection cost per technology in rural areas of sub-Saharan Africa is 2000−3000 USD for grid extension, 500−1200 USD for a microgrid solution, and 150−500 USD for a solar home system. The most recent studies for real-world microgrids installed in sub-Saharan Africa show that the average split of capital expenditure (CAPEX) spending on distribution versus generation in microgrids is at 50%/50%. This is the result of the significant cost reduction of photovoltaics, batteries, and power electronics, in comparison with the practically stable unchanged cost of poles and cables. Even if the business model is chosen by the investor—usually a pay-as-you-go implementation—there is still the difficult decision to make on whether to go for a microgrid or solar home systems. Taking inspiration from multispecies swarms, a Multispecies Swarm Electrification approach is developed that is able to meet the real-world needs of the developing world in terms of rural electrification.

Hybrid microgrids, integrating renewable energy sources and energy storage, are key in extending energy access in the remote areas of developing countries, in a sustainably way and in providing a good quality of service. Their extensive development faces a financing gap, having a high capital expenditure (CAPEX) also due to high storage costs. In the present work, a case study of a Ugandan microgrid was used to compare various battery technologies employed on their own and in a combination with a flywheel, in terms of their durability and the overall levelized cost of energy (LCOE) of the plant. Simulations show how hybrid storage configurations result in a lower LCOE for the current load profile of the microgrid and even more so for two reference residential and industrial load scenarios, suggesting this would remain the best solution even accounting for future socio-economic development. The resulting LCOE for hybrid storage configurations is lower than the average values reported for microgrid projects and represents a promising solution to speed up the development of such electrification initiatives.

Recent reports from international energy agencies indicate that more than a billion of the population in the world is deprived of basic electricity provisions, confined mainly to the remote communities of developing nations. Microgrids are promoted as a potential technology for electricity provisions to off-grid rural communities, but have failed to reach their value proposition in the context of rural electrification access. In view of the rampant rural electrification issues, the objective of this paper is to furnish an understanding of, and advance the knowledge into, methods to facilitate the design and development of microgrid systems for remote communities in developing countries. The methodology involves an integrative review process of an annotated bibliography to summarise past empirical or theoretical literature. As such, this research is based on evaluation attributes, and identifies the challenges and barriers for remote microgrids through an analysis of 19 case studies. The paper concludes by proposing key aspects that need to be considered for developing a framework to improve the sustainability of electricity provisions for off-grid rural communities in developing countries.

Off-grid solar home systems (SHSs) currently constitute a major source of providing basic electricity needs in un(der)-electrified regions of the world, with around 73 million households having benefited from off-grid solar solutions by 2017. However, in and of itself, state-of-the-art SHSs can only provide electricity access with adequate power supply availability up to tier 2, and to some extent, tier 3 levels of the Multi-tier Framework (MTF) for measuring household electricity access. When considering system metrics of loss of load probability (LLP) and battery size, meeting the electricity needs of tiers 4 and 5 is untenable through SHSs alone. Alternatively, a bottom-up microgrid composed of interconnected SHSs is proposed. Such an approach can enable the so-called climb up the rural electrification ladder. The impact of the microgrid size on the system metrics like LLP and energy deficit is evaluated. Finally, it is found that the interconnected SHS-based microgrid can provide more than 40% and 30% gains in battery sizing for the same LLP level as compared to the standalone SHSs sizes for tiers 4 and 5 of the MTF, respectively, thus quantifying the definite gains of an SHS-based microgrid over standalone SHSs. This study paves the way for visualizing SHS-based rural DC microgrids that can not only enable electricity access to the higher tiers of the MTF with lower battery storage needs but also make use of existing SHS infrastructure, thus enabling a technologically easy climb up the rural electrification ladder.

UN Sustainable Development Goal (SDG) 7 states that access to affordable, reliable, sustainable, and modern energy should be provided for all by 2030. Mozambique is one of the poorest countries on earth but has abundant supply of energy resources. The electrification rate, however, has been slow. Rural electrification is hampered by lack of basic infrastructure, institutional barriers, and low ability and willingness to pay for energy services. Thus, there is a general gap between electricity supply and demand. In view of this, the present paper investigates supply and demand of electricity for a typical rural case study area in Mozambique. We suggest a nexus approach to improve water, energy, and food security initiated at a local level. Households in the investigated case study area can be connected to a mini-grid hydropower system that allows for energy production to 80–200 households. To increase the economic profitability of the mini-grid hydropower system we suggest including small-scale industry. For the studied rural village, this would be constituted by a small-scale factory for milling of corn and other cereals. Electricity produced can thus be used for food processing but also for pumping water supply to households for domestic use and small-scale irrigated farming lots. The results indicate that the villagers have a real payment capacity of between 8 and 19 USD per MWh of generated hydropower. Benefits of rural electrification are direct. It contributes to improved living conditions for households and provides better nexus security and sustainable development within healthcare, education, and small-scale business development.

Electrical mini-grids can provide electrification to rural communities far from the national network. However the benefits of such schemes are disputed. We observed changes in two matched trading-centres in Makueni County, Kenya, neither of which were initially electrified. During the study a solar photovoltaic mini-grid scheme (13.5 kWp) was constructed in one of the trading-centres. After electrification there were relative increases in the number of businesses and business income. Comparing the households in the areas around the trading centres, perceived wealth increased more around the electrified trading centre. Qualitative interviews indicated improvements in service provision by the local school and health centre. The co-operative set up to run the mini-grid was free to set its own kWh tariff and chose to reduce it to a level that covers operating costs and would recover 70% of the initial investment interest-free. However, the tariff finally agreed is higher than the national grid tariff, which would be difficult to achieve if the mini-grid was not owned by and run for the benefit of the local community. Overall, we found that the mini-grid had a positive effect over background development, recovered some of its cost and charged a higher tariff than the national rate.

In order to successfully deploy a large number of decentralized energy systems in developing countries, it is necessary to standardize effective methodologies and procedures to develop off-grid/mini-grid systems. Considering that the energy need assessment provides inputs and assumptions used in business modelling and mini-grid design, the accuracy of its results directly affects the technical and financial feasibility studies. Thus, the approach for applying a proven methodology for the energy need assessment of rural communities is aimed at obtaining reliable input data for the mini-grid development. This helps in reducing both the financial challenges by mitigating the uncertainties in electricity demand and the technical challenges by contributing to adequately size off-grid power generation systems, with a view to boost toward a common overall objective of mini-grid’s optimization methods and tools. Hence, taking into consideration that target communities differ in terms of needs and context conditions, the proposed paper describes an inclusive methodology that can be adapted case-by-case. It provides an effective applied solution the lack of proven guidelines from project developers or literature, giving priority to data collection methods able to achieve a large sample representative of the market, with high accuracy in estimating the energy consumptions from electricity substitutes.

Traditional electrification methods, including grid extension and stand-alone diesel generators, have shown limitations to sustainability in the face of rural electrification challenges in sub-Saharan Africa (SSA), where electrification rates remain the lowest in the world. This study aims at performing a techno-economic analysis and optimization of a pumped-hydro energy storage based 100%-renewable off-grid hybrid energy system for the electrification of Djoundé, which is a small village in northern Cameroon. Hybrid Optimization of Multiple Energy Resources (HOMER) software was used as an analysis tool, and the resulting optimal system architecture included an 81.8 kW PV array and a 15 kW biogas generator, with a cost of energy (COE) and total net present cost (NPC) of €0.256/kWh and €370,426, respectively. The system showed promise given the upcoming decrease in installation cost of photovoltaic systems. It will be viable in parts of SSA region but, significant investment subsidies will be needed elsewhere. The originality of this study can be emphasized in three points: (1) the modelling with the recently introduced pumped-hydro component of HOMER; (2) broadening sensitivity analysis applications to address practical issues related to hybrid renewable energy systems (HRES); and, (3) consideration of the agricultural sector and seasonal variation in the assessment of the electricity demand in an area of SSA.