Search

Chalcogen bonds (ChBs) involving selenium have attracted substantial scholarly interest in past years owing to their fundamental roles in various chemical and biological fields. However, the effect of the valency state of the electron-deficient selenium atom on the characteristics of such ChBs remains unexplored. Herein, we comparatively studied the σ-hole-type Se∙∙∙O ChBs between SeF2/SeF4 and a series of oxygen-bearing Lewis bases, including water, methanol, dimethyl ether, ethylene oxide, formaldehyde, acetaldehyde, acetone, and formic acid, using ab initio computations. The interaction energies of these chalcogen-bonded heterodimers vary from −5.25 to −11.16 kcal/mol. SeF2 participates in a shorter and stronger ChB than SeF4 for all the examined heterodimers. Such Se∙∙∙O ChBs are closed-shell interactions, exhibiting some covalent character for all the examined heterodimers, except for SeF4∙∙∙water. Most of these chalcogen-bonded heterodimers are predominantly stabilized through orbital interactions between the lone pair of the O atom in Lewis bases and the σ*(Se–F) antibonding orbitals of Lewis acids. The back-transfer of charge from the lone pair of selenium into the σ* or π* antibonding orbitals of Lewis bases is also observed for all systems. Energy decomposition analysis reveals that the electrostatic component significantly stabilizes the targeted heterodimers, while the induction and dispersion contributions cannot be ignored.

Pulmonary artery stenosis represents a group of disorders involving main, branch or peripheral pulmonary arteries with pain, dyspnea, hemoptysis or even no symptoms. Early diagnosis and timely intervention are crucial for reducing mortality, but timely diagnosis is challenging due to the non-specific symptoms. Computed tomography pulmonary angiography (CTPA) is useful in the diagnosis because it can provide more details about abnormal changes in the lumen, vessel wall and adjacent mediastinal structures. Congenital and acquired pulmonary artery anomalies have some characteristics on CTPA, which can be useful for differential diagnosis. Awareness of these conditions is important for radiologists. This pictorial review provides an overview of CTPA imaging features of pulmonary artery stenosis.

Quantitative real-time PCR (qRT-PCR) is a widely applied technique for accurately assessing the expression of target genes. In practice, the evaluation of gene expression requires appropriate reference genes. To screen reliable reference genes for evaluating gene expression via qRT-PCR in Mythimna loreyi, a notorious migratory pest across Asia, Africa, Europe, and Australia, we assessed the expression stability of 13 candidate reference genes in M. loreyi using the ΔCt method, BestKeeper, Normfinder, GeNorm, and the web-based comprehensive platform RefFinder. These reference genes include RPL10, RPL27, RPL32, RPS3, TATA−box, GAPDH, AK, Actin, EF, α−tubulin, SOD, 18S rRNA, and FTZ−F1, which is frequently employed in Lepidoptera insects. Our findings revealed that the performance of the candidate reference gene depended on experimental conditions. Specifically, RPL27 and RPL10 were the most suitable for evaluating expression changes across developmental stages, tissues, and adult ages. The optimal reference genes were recommended in specific experiment conditions, for instance, EF and RPS3 were recommended for mating status, AK and RPL10 were recommended for temperature treatments, RPL27 and FTZ−F1 were recommended for larva diet, and EF and RPL27 were recommended for adult diet treatments. Additionally, expression profiles of pheromone-binding protein 2 (MlorPBP2) and glutathione S-transferase (MlorGST1) were used to validate the reference genes. This study provides reference genes for the accurate normalization of qRT-PCR data, laying the groundwork for studying the expression of target genes in M. loreyi.

Underwater detection faces uncomfortable illumination conditions, and traditional optical images sensitive to intensity often cannot work well in these conditions. Polarization imaging is a good solution for underwater detection under adverse lighting conditions. However, the process of obtaining polarization information causes it to be more sensitive to noise; serious noise reduces the quality of polarized images and subsequent performance in advanced visual tasks. Unfortunately, the flourishing low-light image enhancement methods applied to intensity images have not demonstrated satisfactory performance when transferred to polarized images. In this paper, we propose a low-light image enhancement paradigm based on the antagonistic properties of polarization parameters. Furthermore, we develop a dual-branch network that relies on a gradient residual dense feature extraction module (GRD) designed for polarized image characteristics and polarization loss, effectively avoiding noise introduced during the direct amplification of brightness, and capable of restoring target contour details. To facilitate a data-driven learning method, we propose a simulation method for underwater low-light polarized images. Extensive experimental results on real-world datasets demonstrate the effectiveness of our proposed approach and its superiority against other state-of-the-art methods.

Quantitative real-time PCR (qRT-PCR) is widely accepted as a precise and convenient method for quantitatively analyzing the expression of functional genes. The data normalization strongly depends upon stable reference genes. The bean bug, Riptortus pedestris (Hemiptera: Alydidae), is a significant pest of leguminous crops and broadly distributed across Southeast Asia. In this study, a total of 16 candidate reference genes (RPL32, RPS23, SDHA, UBQ, UCCR, GST, TATA−box, HSP70, GAPDH, RPL7A, SOD, RPS3, Actin, α−tubulin, AK, and EF1) were carefully chosen in R. pedestris, and their expression levels were assessed across various conditions, including different developmental stages, diverse tissues, temperature treatments, adult age, molting time, and mating status. Following this, the stability of these reference genes was evaluated using four algorithms (ΔCt, GeNorm, NormFinder, and BestKeeper). Ultimately, the comprehensive rankings were determined using the online tool RefFinder. Our results demonstrate that the reference gene for qRT-PCR analysis in R. pedestris is contingent upon the specific experimental conditions. RPL7A and EF1 are optimal reference genes for developmental stages. Furthermore, α−tubulin and EF1 exhibit the most stable expression across various adult tissues. RPL32 and RPL7A exhibit the most stable expression for adult age. For nymph age, RPL32 and SOD display the most stable expression. For temperature conditions, RPS23 and RPL7A were identified as the most suitable for monitoring gene expression. Lastly, we verified the practicability of evaluating expression levels of odorant-binding protein 37 (RpedOBP37) and cytochrome P450 6a2 (RpedCYP6) throughout developmental stages, tissues, and temperature conditions. These findings are a significant addition to the qRT-PCR analysis studies on R. pedestris, serving as a fundamental groundwork for future investigations on stable reference genes in R. pedestris as well as other organisms.

The occurrence of new vertebral fractures (NVFs) after vertebral augmentation (VA) procedures is common in patients with osteoporotic vertebral compression fractures (OVCFs), leading to painful experiences and financial burdens. We aim to develop a radiomics nomogram for the preoperative prediction of NVFs after VA. Data from center 1 (training set: n = 153; internal validation set: n = 66) and center 2 (external validation set: n = 44) were retrospectively collected. Radiomics features were extracted from MRI images and radiomics scores (radscores) were constructed for each level-specific vertebra based on least absolute shrinkage and selection operator (LASSO). The radiomics nomogram, integrating radiomics signature with presence of intravertebral cleft and number of previous vertebral fractures, was developed by multivariable logistic regression analysis. The predictive performance of the vertebrae was level-specific based on radscores and was generally superior to clinical variables. RadscoreL2 had the optimal discrimination (AUC ≥ 0.751). The nomogram provided good predictive performance (AUC ≥ 0.834), favorable calibration, and large clinical net benefits in each set. It was used successfully to categorize patients into high- or low-risk subgroups. As a noninvasive preoperative prediction tool, the MRI-based radiomics nomogram holds great promise for individualized prediction of NVFs following VA.

In this paper, a novel two-dimensional direction of arrival (2D-DOA) estimation method with total variation regularization is proposed to deal with the problem of sparse DOA estimation for spatially extended sources. In a general sparse framework, the sparse 2D-DOA estimation problem is formulated with the regularization of extended source characteristics including spatial position grouping, acoustic signal block sparse, and correlation features. An extended sources acoustic model, two-dimensional array manifold and its complete representation, total variation regularization penalty term, and the regularization equation are built, and are utilized to seek the solutions where the non-zero coefficients are grouped together with optimum sparseness. A total variation sparse 2D-DOA estimation model is constructed by combining total variation regularization with LASSO. The model can be easily solved by the convex optimization algorithm, and the solving process can promote the sparsity of the solution on the spatial derivatives and the solution itself. The theoretical analysis results show that the steps of decorrelation processing and angle matching of traditional 2D-DOA estimation methods could be avoided when adopting the proposed method. The proposed method has better robustness to noise, better sparsity, and faster estimation speed with higher resolution than traditional methods. It is promising to provide a coherent sources sparse representation of a non-strictly sparse field.

In the application of synthetic aperture radar differential interferometry in urban environments, it is easy to regard the phase change in the deformation band of buildings under construction as noise that requires filtering. This introduces an error into the surrounding area while over-filtering, resulting in an error in the magnitude of the deformation measurement results for the entire region and the loss of deformation details in the surrounding area. Based on the traditional DInSAR workflow, this study added a deformation magnitude identification step, determined the deformation magnitude by using enhanced offset tracking technology, supplemented the filtering quality map and removed the construction areas that affect the interferometry in the filtering stage. The enhanced offset tracking technique adjusted the ratio of contrast saliency and coherence via the contrast consistency peak in the radar intensity image, which was used as the basis for adjusting the adaptive window size. The method proposed in this paper was evaluated in an experiment on a stable region using simulated data and in an experiment on a large deformation region using Sentinel-1 data. The experimental results show that the enhanced method has a better anti-noise ability than the traditional method, and the accuracy rate is improved by about 12%. The supplemented quality map can effectively remove the large deformation area to prevent over-filtering while ensuring the filtering quality, and it can achieve better filtering results.

Isoliquiritigenin (ILQ) has a number of biological activities such as antitumor and anti-inflammatory effects. However, biomedical applications of ILQ are impeded by its poor aqueous solubility. Therefore, in this research, we prepared a novel ILQ-loaded nanoemulsion, i.e., ILQ-NE, which consisted of Labrafil® M 1944 CS (oil), Cremophor® EL (surfactant), ILQ, and phosphate-buffered saline, by employing a combined sonication (high-energy) and phase-inversion composition (low-energy) method (denoted as the SPIC method). The ILQ-NE increased the ILQ solubility ~1000 times more than its intrinsic solubility. It contained spherical droplets with a mean diameter of 44.10 ± 0.28 nm and a narrow size distribution. The ILQ loading capacity was 4%. The droplet size of ILQ-NE remained unchanged during storage at 4 °C for 56 days. Nanoemulsion encapsulation effectively prevented ILQ from degradation under ultraviolet light irradiation, and enhanced the ILQ in vitro release rate. In addition, ILQ-NE showed higher cellular uptake and superior cytotoxicity to 4T1 cancer cells compared with free ILQ formulations. In conclusion, ILQ-NE may facilitate the biomedical application of ILQ, and the SPIC method presents an attractive avenue for bridging the merits and eliminating the shortcomings of traditional high-energy methods and low-energy methods.

To further study the discharge characteristics and machining mechanism of micro-electrical discharge machining (micro-EDM), the variation trends of the discharge energy and discharge crater size with actual discharge duration are discussed based on single-pulse experiments. The polarity effect of micro-EDM was analyzed according to the motion characteristics of electrons and ions in the discharge plasma channel. The results show that the discharge current and voltage of micro-EDM were independent of the discharge width and open-circuit voltage. The energy utilization rate of the short-pulse discharge was relatively high, and the energy utilization rate decreased gradually as the discharge duration increased. Even if the mass of the positive ion was much larger than that of the electron, the kinetic energy of the positive ion was still less than that of the electron when bombarding the surface of the electrode. The acceleration and speed of electrons were very high, and the number of times that electrons bombarded the surface of positive electrode was more than 600 times that of positive ions bombarding the surface of the negative electrode during the same time.

Titanium alloys are widely used in various fields, but their machinability is poor because the chip would easily adhere to the tool surface during cutting, causing poor surface quality and tool wear. To improve the cutting performance of titanium alloy Ti-6Al-4V, experiments were conducted to investigate the effect of micro textured tool on the cutting performances. The cemented carbide tools whose rake faces were machined with line, rhombic, and sinusoidal groove textures with 10% area occupancy rates were adopted as the cutting tools. The effects of cutting depth and cutting speed on feed force and main cutting force were discussed based on experimental results. The results show that the cutting force produced by textured tools is less than that produced by non-textured tools. Under different cutting parameters, the best cutting performance can be obtained by using sinusoidal textured tools among the four types of tools. The wear of micro textured tools is significantly lower than that of non-textured tools, due to a continuous lubrication film between the chip and the rake face of the tool that can be produced because the micro texture can store and replenish lubricant. The surface roughness obtained using the textured tool is better than that using the non-textured tool. The surface roughness Ra can be reduced by 35.89% when using sinusoidal textured tools. This study is helpful for further improving the cutting performance of cemented carbide tools on titanium alloy and prolonging tool life.