Search

Large-bodied, river-migrating, rheophilic fishes (cyprinids) such as barbel Barbus barbus, nase Chondrostoma nasus, asp Leuciscus aspius, and vimba bream Vimba vimba are threatened in major European drainages. This represents the subject of our present study. Their hatchery nutrition prior to river-release is mostly on a hit-and-trial or carp-based diet basis. The study demonstrates an alternative approach to decide optimum nutrition for these conservation-priority and nutritionally data-poor fishes. The study revealed barbel as a central representative species in terms of wild body composition among other native rheophilic cyprinids considered (asp, nase, vimba bream). Taking barbel as a model, the study shows that barbel or rheophilic cyprinids may have carnivorous-like metabolism and higher requirements of S-containing, aromatic, branched-chain amino acids (AAs) than carps. Besides, there are important interactions of AAs and fatty acids (FAs) biosynthesis to consider. Only proper feeding of nutritionally well-selected diets may contribute to river stocking mandates such as steepest growth trajectory (≈less time in captivity), ideal size-at-release, body fitness (≈blend-in with wild conspecifics, predator refuge), better gastrointestinal condition, maximized body reserves of functional nutrients, and retention efficiencies (≈uncompromised physiology). Considering important physiological functions and how AA–FA interactions shape them, hatchery-raised fishes on casually chosen diets may have high chances of physiological, morphological, and behavioral deficits (≈low post-stocking survivability). Based on the observations, optimum nutrient requirements of juvenile (0+ to 1+ age) barbels are suggested. Future efforts may consider barbels as a nutrition model for conservation aquaculture of threatened and data poor rheophilic cyprinids of the region.

Background and objectives: For the treatment of chronic unilateral radicular syndrome, there are various methods including three minimally invasive computed tomography (CT)-guided methods, namely, pulsed radiofrequency (PRF), transforaminal oxygen ozone therapy (TFOOT), and transforaminal epidural steroid injection (TFESI). Despite this, it is still unclear which of these methods is the best in terms of pain reduction and disability improvement. Therefore, the purpose of this study was to evaluate the short and long-term effectiveness of these methods by measuring pain relief using the visual analogue scale (VAS) and improvement in disability (per the Oswestry disability index (ODI)) in patients with chronic unilateral radicular syndrome at L5 or S1 that do not respond to conservative treatment. Materials and Methods: After screening 692 patients, we enrolled 178 subjects, each of whom underwent one of the above CT-guided procedures. The PRF settings were as follows: pulse width = 20 ms, f = 2 Hz, U = 45 V, Z ˂ 500 Ω, and interval = 2 × 120 s. For TFOOT, an injection of 4–5 mL of an O2-O3 mixture (24 μg/mL) was administered. For the TFESI, 1 mL of a corticosteroid (betamethasone dipropionate), 3 mL of an anaesthetic (bupivacaine hydrochloride), and a 0.5 mL mixture of a non-ionic contrast agent (Iomeron 300) were administered. Pain intensity was assessed with a questionnaire. Results: The data from 178 patients (PRF, n = 57; TFOOT, n = 69; TFESI, n = 52) who submitted correctly completed questionnaires in the third month of the follow-up period were used for statistical analysis. The median pre-treatment visual analogue scale (VAS) score in all groups was six points. Immediately after treatment, the largest decrease in the median VAS score was observed in the TFESI group, with a score of 3.5 points (a decrease of 41.7%). In the PRF and TFOOT groups, the median VAS score decreased to 4 and 5 points (decreases of 33% and 16.7%, respectively). The difference in the early (immediately after) post-treatment VAS score between the TFESI and TFOOT groups was statistically significant (p = 0.0152). At the third and sixth months after treatment, the median VAS score was five points in all groups, without a statistically significant difference (p > 0.05). Additionally, there were no significant differences in the Oswestry disability index (ODI) values among the groups at any of the follow-up visits. Finally, there were no significant effects of age or body mass index (BMI) on both treatment outcomes (maximum absolute value of Spearman’s rank correlation coefficient = 0.193). Conclusions: Although the three methods are equally efficient in reducing pain over the entire follow-up, we observed that TFESI (a corticosteroid with a local anaesthetic) proved to be the most effective method for early post-treatment pain relief.

The use of anabolic steroid hormones as growth promoters in feed for farm animals has been banned in the European Union since 1988 on the basis of Council Directive 96/22/EC. However, there is still ongoing monitoring and reporting of positive findings of these banned substances in EU countries. The aim of this work was to investigate the efficacy and discriminatory ability of metabolic fingerprinting after the administration of 17β-testosterone esters to pigs. Plasma and urine samples were chromatographically separated on a Hypersil Gold C18 column. High resolution mass spectrometry metabolomic fingerprints were analysed on a hybrid mass spectrometer Q-Exactive. Three independent multivariate statistical methods, namely principal component analysis, clustre analysis, and orthogonal partial least squares discriminant analysis showed significant differences between the treated and control groups of pigs even 14 days after the administration of the hormonal drug. Plasma samples were also analysed by a conventional quantitative analysis using liquid chromatography with tandem mass spectrometry and a pharmacokinetic curve was constructed based on the results. In this case, no testosterone residue was detected 14 days after the administration. The results clearly showed that a metabolomics approach can be a useful and effective tool for the detection and monitoring of banned anabolic steroids used illegally in pig fattening.

Recent data on Duchenne muscular dystrophy (DMD) show myocyte progenitor’s involvement in the disease pathology often leading to the DMD patient’s death. The molecular mechanism underlying stem cell impairment in DMD has not been described. We created dystrophin-deficient human pluripotent stem cell (hPSC) lines by reprogramming cells from two DMD patients, and also by introducing dystrophin mutation into human embryonic stem cells via CRISPR/Cas9. While dystrophin is expressed in healthy hPSC, its deficiency in DMD hPSC lines induces the release of reactive oxygen species (ROS) through dysregulated activity of all three isoforms of nitric oxide synthase (further abrev. as, NOS). NOS-induced ROS release leads to DNA damage and genomic instability in DMD hPSC. We were able to reduce both the ROS release as well as DNA damage to the level of wild-type hPSC by inhibiting NOS activity.

Small unmanned aerial systems (UASs) equipped with an optical camera are a cost-effective strategy for topographic surveys. These low-cost UASs can provide useful information for three-dimensional (3D) reconstruction even if they are equipped with a low-quality navigation system. To ensure the production of high-quality topographic models, careful consideration of the flight mode and proper distribution of ground control points are required. To this end, a commercial UAS was adopted to monitor a small earthen dam using different combinations of flight configurations and by adopting a variable number of ground control points (GCPs). The results highlight that optimization of both the choice and combination of flight plans can reduce the relative error of the 3D model to within two meters without the need to include GCPs. However, the use of GCPs greatly improved the quality of the topographic survey, reducing error to the order of a few centimeters. The combined use of images extracted from two flights, one with a camera mounted at nadir and the second with a 20° angle, was found to be beneficial for increasing the overall accuracy of the 3D model and especially the vertical precision.

In the post-socialistic space, old, industrialised regions are not only dealing with problems with the regeneration of industrial brownfields but also with the occurrence of post-agricultural brownfields. The main objective of this paper is to identify and interpret how a successful network of cooperating actors was formed that participated in the process of transforming an agricultural brownfield into a successful rural business zone. From a methodological perspective, the article is based on the findings derived from a set of written memories with ten key actors who were involved in the redevelopment process. The studied regeneration project, which was implemented thanks to the successful cooperation of network of actors both from different hierarchical levels (local, regional and central level) and from the different sectors (public, private and non-profit sector), regenerated an area of 10.4 hectares thanks to both public and private investments of approximately CZK 240 million. Regeneration contributed to the creation of approximately 450 new jobs, and thanks to this project, the population in Třanovice also increased significantly in the transition period (1991–2021), which the studied community positively distinguishes from the shrinking urban centres and rural communities in the post-industrial neighbourhoods.

Plastic spacers create a linear and systemic weakening of the structure. The extreme loading of the structure tests the structure itself to its load-bearing limit or even locally exceeds this limit, thus revealing all its weak points, which are the spacers. Nevertheless, the influence of the spacers is not included in the design calculation of the reinforced concrete element. In addition, products intended as spacers for the placement of reinforcement do not belong to the specific families of construction products covered by a harmonized standard of European parliament regulation. For these reasons, it is not required to demonstrate any characteristics of these products. This fact allows the use of arbitrary spacers’ shapes and materials. As shown by the experiment carried out, the use of commonly used plastic liners will result in a weakening of the cross-section. The normal assessment of the ultimate or serviceability limit state is not affected by this weakening. An example of an experiment carried out where this problem was captured is the subject of this paper. With Europe’s current deteriorated safety situation, understanding the influence of spacers in blast-loaded reinforced concrete structures on structural failure is important, and it is appropriate to further address this issue. Based on this experiment, it is not possible to accurately identify the causes of the explosion cracks. In order to determine with certainty the effect of spacers on the strength of the structure under abnormal blast loadings, research needs to focus on this area. In the field experimental measurements and numerical simulations, it was found that the use of linear spacers has an effect on crack formation under the blast action of the tested slab.

The reliability of numerical simulations of the structural response of nonhomogeneous materials to high velocity loadings is highly dependent on the used material model and parameters. For nonhomogeneous materials, such as fibres, reinforced concrete is widely used for the Winfrith model, but the question of appropriate material parameters for Ultra-High Performance Fibre Reinforcement Concrete (UHPFRC) under high velocity loadings is still open. The article deals with possible method of inverse identification of material parameters of a UHPFRC slab under blast loading for a Winfrith material model. Possible application is in the field of numerical simulation of protective or critical infrastructure response to blast loading. Experimental measurement of the time–deflection curve through laser scanning using the triangulation method gave us input data for an inverse identification phase conducted in Optislang software. Obtained material parameters from a given range are optimized for blast loading and their Pearson’s correlation coefficient provides us information about their significance for simulation.

Drivers of the speciation in bacteria, including geographical isolation and horizontal gene transfer, are still poorly understood. Here, we characterized a new lineage within an anciently diverged thermophilic cyanobacteria. We sequenced the whole genome of a strain Thermostichus vulcanus isolated from the Rupite spring (Bulgaria), which is closely related to Theromstichus strains JA-2-3Aa and JA-2-3B′a(2-13). We performed phylogenetic inference, horizontal gene transfer estimation, and CRISPR/Cas system characterization. We found that the Rupite strain is a distinct species from strains JA-2-3Aa, and JA-2-3B′a(2-13). Furthermore, the horizontal gene transfer seemed to be more frequent among the geographically distant species than between the two species within the same hot spring. The CRISPR/Cas system had variable complexity among the species of Thermostichus in terms of both the number of spacers and genes. The Rupite strain had the highest, and JA-2-3Aa the lowest number of spacers among the analyzed strains, and the CRISPR spacers were only rarely shared among the strains. We conclude that the CRISPR/Cas system size varied among the lineages as well as the gene flow.

Anaerobic digestion (AD) plants undoubtedly represent an integral and irreplaceable element in rural energy transition and sustainable waste management. In our study, we focus on an advanced understanding of the dynamics behind the changing perceptions of AD plants in host communities in Poland, Slovakia, and the Czech Republic. The surveyed AD plant case studies were selected to represent best-practice examples of AD plant operations in their countries. By means of a comparative survey in three host communities, we seek to learn more about the shift in perceptions of AD plants between their planning and operational phases. We find that, although our cases are considered best-practice examples of AD plant operations, their overall support in their communities dramatically dropped in the operational phase consequent to real-life experience with living in the neighbourhood of an AD plant. Additionally, our findings indicate that respondents who reported the most severe deterioration of AD plant perceptions were, surprisingly, those who had participated in the planning process more than other respondents. The most frequently mentioned type of participation in the planning phase was reported to be visits to the local administration office to inspect an AD plant’s planning documentation. We argue that deteriorating perceptions of best-practice examples of AD plant operations negatively impact the further development and acceptance of the biogas sector in Eastern Europe. The element of acceptance by the locals of AD plant operations urgently requires reflection in the definition of best practices to inspire and upgrade both existing and planned biogas energy projects.

Fortification structures, both military and civilian, are designed to resist a blast explosion to some extent. Their technical condition after a blast load must be assessed in a fast and reliable way to enable the users’ decision about the future use of the structure. Preferably, for the assessment of the protective structure, the non-destructive testing method should be used. To assess the suitability of ultrasound testing method for fortification structures built from steel fiber reinforced concrete, an investigation in a laboratory and in situ was conducted, together with numerical simulation and statistical evaluation. The numerical simulation of the blast load of a steel fiber reinforced concrete slab was conducted using multiphysics simulation software with the aim to verify basic parameters of the field experiment. During the field tests, several slabs were loaded by plastic explosive and changes in the structure of the slabs, before and after the blast load, were examined using the ultrasound pass-through method. After the field tests, the slabs were subjected to a destructive laboratory test to determine their residual strength. Subsequently, the data sets obtained from the measurements were tested using functional data analysis. The results from the ultrasound pulse method show that specimens after a dynamic blast load can in some cases increase the strength of their cement matrix.

Our paper deals with a micro-study of one residential building in the city center of Brno (Czech Republic) where we strived to identify and better understand the main factors behind the successful implementation of environmentally friendly solutions during the regeneration process. We followed the unique, complicated, and often conflictual story of the regeneration (conducted during the years 2010–2020) of the residential building, which was originally built in the 1930s. In total, 18 solutions were discussed—all four solutions on the state level of centralization were realized, only two of six solutions on the building level of centralization were materialized, and six of eight decentralized solutions were realized during the regeneration process. In the field of energy savings requiring high investments, a significant dominance of centralized solutions (on the state level) was identified. Centralized solutions on the building level such as heat pumps or solar panels were not realized. In the area of waste management and care for community greenery (that did not require large investments), we see as the most beneficial the promotion of decentralized solutions in the form of community-funded communal composting or the planting of new greenery. The formation of various regeneration options, which is discussed in detail, appeared as an integral instrument for dealing with conflicts among residents during the planning phase.

The possible use of leaching residue from leaching deep-sea nodules in SO2/H2SO4/H2O medium as a low-cost adsorbent of heavy metals (Pb(II), Cd(II), Cu(II), Ni(II), Co(II), As(V)) was studied. The leaching residue was found to be an effective adsorbent for all of the tested elements; however, it was inactive in the solution containing As(V). The chemical activation of adsorbent in 10 vol. % HCl resulted in the greatest improvement of adsorption properties, while the activation in 10 vol. % HNO3 and heat treatment at 250 °C did not significantly affect the sorption characteristics of treated adsorbents compared with the original leaching residue. After HCl activation, the maximal adsorption capacities for lead (12.0 mg/g at pH 5.0 after 1 h), nickel (3.1 mg/g at pH 5.5 after 4 h) and cobalt (2.0 mg/g at pH 5.0 after 2 h) were achieved. Additional mechanical treatment connected with HCl activation provided the highest adsorption capacities for cadmium (11.5 mg/g at pH 4.0) and copper (5.7 mg/g at pH 4.5). Coprecipitation of Fe/Al-based particles on the surface of the leaching residue increased As(V) removal of the adsorbent. Surface coating based on AlIII was extremely effective, causing the increase of the adsorption capacity from 0 with the original leaching residue, to 28.1 mg/g (pH 7.0, 24 min). Kinetics studies showed the rapid progress of adsorption for Pb(II), Cd(II), and As(V) in tens of minutes, while the adsorption of Cu(II), Ni(II) and Co(II) approached a steady state after 2 h.