Search

Drawing on Karl Marx’s ecological concepts of the “metabolic rift” and the “emancipation of senses”, this paper explores an alternative ecocinema that integrates the ecological with the social and the economic. Early Hollywood films, such as Sunrise: A Song of Two Humans (1927) and The Good Earth (1937), represent the metabolic rift in human relationships as a byproduct of the metabolic rift with nature created in the process of urbanization; hence, they can be regarded as precursors to an alternative ecocinema, which I refer to as “metabolic cinema”. The Story of the Golden Bell (Jinling Zhuan), a comedy film produced during the Chinese Great Leap Forward in 1958, offers an intriguing case for socialist metabolic cinema as a multisensory medianature that participates in and facilitates the metabolic process between humans and nature, as well as the social metabolism among humans, despite the period’s notorious ecological record. The film not only consciously moves away from the visual-centric model associated with capitalist consumerism by using the aural to rectify the once-aberrant visual but also demonstrates how romantic love, as one of the human senses, must be emancipated along with other senses through denouncing utilitarianism and commercialism and, subsequently, returning to need-based labor as the universal condition for the metabolic interaction between humans and nature.

Numerical experiments using the WRF model were conducted to analyze the sensitivity of Typhoon Mangkhut intensification simulations to seven widely used planetary boundary layer (PBL) parameterization schemes, including YSU, MYJ, QNSE, MYNN2, MYNN3, ACM2, and BouLac. The results showed that all simulations generally reproduced the tropical cyclone (TC) track and intensity, with YSU, QNSE, and BouLac schemes better capturing intensification processes and closely matching observed TC intensity. In terms of surface layer parameterization, the QNSE scheme produced the highest Ck/Cd ratio, resulting in stronger TC intensity based on Emanuel’s potential intensity theory. In terms of PBL parameterization, the YSU and BouLac schemes, with the same revised MM5 surface layer scheme, simulated weaker turbulent diffusivity Km and shallower mixing height, leading to stronger TC intensity. During the intensification period, the BouLac, YSU, and QNSE PBL schemes exhibited stronger tangential wind, radial inflow within the boundary layer, and updraft around the eye wall, consistent with TC intensity results. Both PBL and surface layer parameterization significantly influenced simulated TC intensity. The QNSE scheme, with the largest Ck/Cd ratio, and the YSU and BouLac schemes, with weaker turbulent diffusivity, generated stronger radial inflow, updraft, and warm core structures, contributing to higher storm intensity.

Base editing represents a cutting-edge genome editing technique that utilizes the CRISPR system to guide base deaminases with high precision to specific genomic sites, facilitating the targeted alteration of individual nucleotides. Unlike traditional gene editing approaches, base editing does not require DNA double-strand breaks or donor templates. It functions independently of the cellular DNA repair machinery, offering significant advantages in terms of both efficiency and accuracy. In this review, we summarize the core design principles of various DNA base editors, their distinctive editing characteristics, and tactics to refine their efficacy. We also summarize their applications in crop genetic improvement and explore their potential contributions to forest genetic engineering.

(Cu,C)Ba2Ca3Cu4Oy is a nontoxic cuprate superconducting material with a superconducting transition temperature of about 116 K. Recently, it was found that bulk samples of this material synthesized under high pressure hold the highest irreversibility line among all the superconductors, which is very promising for its application in the liquid nitrogen temperature field. In this work, high-temperature (Cu,C)Ba2Ca3Cu4Oy superconducting films with large irreversible fields were prepared on SrLaAlO4(00l) substrates by pulsed laser deposition. The substrate temperature during deposition proved to be the most important parameter determining the morphology and critical temperature of the superconductors, with 680 °C considered to be the optimum temperature. X-ray diffraction (XRD) results showed that the (Cu,C)Ba2Ca3Cu4Oy films prepared under optimal conditions exhibited epitaxial growth with the a-axis perpendicular to the film surface and the b- and c-axes parallel to the substrate, with no evidence of any other orientation. In addition, resistivity measurements showed that the onset transition temperature (Tconset) was approximately 116 K, the zero-resistance critical temperature (Tc0) was around 53 K, and the irreversible field (Hirr) was about 9 T at 37 K for (Cu,C)Ba2Ca3Cu4Oy films under optimal temperature. This is the first example of the successful growth of superconducting (Cu,C)Ba2Ca3Cu4Oy films on SrLaAlO4(00l) substrates. This will facilitate high-performance applications of (Cu,C)Ba2Ca3Cu4Oy superconducting materials in the liquid nitrogen temperature field.

Microbial scale-up cultivation is the first step to bioremediating cadmium (Cd)-contaminated soils at the industrial scale. However, the changes in the microbial community as the bioreactor volume expands and their associations with soil Cd removal remain unclear. Herein, a six-stage scale-up cultivation process of mixotrophic acidophiles was conducted, scaling from 0.1 L to 10 m3, to remediate Cd-contaminated soils. The findings showed that bioreactor expansion led to a delay in sulfur and glucose oxidations, resulting in a reduced decline in solution pH and cell density. There were minimal differences observed in bacterial alpha-diversity and community structure as the bioreactor volume increased, except for the 10 m3 scale. However, bioreactor expansion decreased fungal alpha-diversity, changed the community structure, and simplified fungal community compositions. At the family level, Acidithiobacillaceae and Debaryomycetaceae dominated the bacterial and fungal communities throughout the scale-up process, respectively. Correlation analysis indicated that the indirect effect of mixotrophic acidophiles played a significant role in soil Cd removal. Bacterial community shifts, driven by changes in bioreactor volume, decreased the pH value through sulfur oxidation, thereby indirectly enhancing Cd removal efficiency. This study will contribute to the potential industrial application of mixotrophic acidophiles in bioremediating Cd-contaminated soils.

Understanding soil phosphorus (P) distribution and its key drivers is fundamental for sustainable P management. In this study, a 21-year fertilization experiment on black soil was carried out, setting up five fertilization treatments: unfertilized control (CK), nitrogen and potassium (NK), nitrogen, P and potassium (NPK), NPK plus straw (NPKS), and NPK plus manure (NPKM). The distribution and effecting factors of P pools within soil aggregates were investigated. Compared to CK, the NK and NPK treatments decreased calcium-associated P concentration in all aggregate fractions. Meanwhile, the NPK treatment significantly increased the organic P extracted from NaOH in unaggregated particles (3, and NaOH increased as aggregate size increased. This was mainly because straw or manure addition promoted soil organic carbon (SOC) storage in aggregates, creating more sorption sites via association with amorphous metallic minerals, and, thus, facilitating P accumulation. In conclusion, decreasing soil pH by chemical fertilizers is an effective strategy for mobilizing soil P, whereas increasing SOC by straw or manure facilitates P accumulation.

Diamond/aluminum composites have attracted significant attention as novel thermal management materials, with their interfacial bonding state and configuration playing a crucial role in determining their thermal conductivity and mechanical properties. The present work aims to evaluate the bending strength and thermal conductivity of CNT-modified Ti-coated diamond/aluminum composites with multi-scale structures. The Fe catalyst was encapsulated on the surface of Ti-coated diamond particles using the solution impregnation method, and CNTs were grown in situ on the surface of Ti-coated diamond particles using the plasma-enhanced chemical vapor deposition (PECVD) method. We investigated the influence of interface structure on the thermal conductivity and mechanical properties of diamond/aluminum composites. The results show that the CNT-modified Ti-coated diamond/aluminum composite exhibits excellent bending strength, reaching up to 281 MPa, compared to uncoated diamond/aluminum composites and Ti-coated diamond/aluminum composites. The selective bonding between diamond and aluminum was improved by the interfacial reaction between Ti and diamond particles, as well as between CNT and Al. This led to the enhanced mechanical properties of Ti-coated diamond/aluminum composites while maintaining acceptable thermal conductivity. This work provides insights into the interface’s configuration design and the performance optimization of diamond/metal composites for thermal management.

Knock-out of genes of metabolic pathways is conventionally used in the metabolic engineering of microorganisms, but it is not applicable for genes of essential pathways. In order to avoid undesirable effects caused by gene deletion, it is attractive to develop riboswitches to dynamically control the metabolic pathways of microbial cell factories. In this regard, the aim of this study is to utilize the lysine riboswitch to control gene expressions of the biosynthetic pathways and by-pathways and thus improve lysine production in Corynebacterium glutamicum. To achieve this, a natural lysine riboswitch from Lactobacillus plantarum (LPRS) was first detected and then fused with RFP to test its functionality. After that, engineered lysine-activated (Lys-A) and lysine-repressed (Lys-R) riboswitches were successfully screened by dual genetic selection. Furthermore, the optimized A263 and R152 were applied to control the expression of aspartate kinase III and homoserine dehydrogenase in the lysine-producing strain C. glutamicum QW45, respectively. In contrast with QW45, the growth of the resulting A263-lysC mutant QW48 was similar to that of QW45; however, the growth of the resulting R357-hom mutant QW54 was slightly inhibited, indicating an inhibition of threonine biosynthesis caused by the riboswitch upon binding of intracellular lysine. Importantly, the lysine production of QW48 and QW54 was, respectively, 35% and 43% higher than that of the parent strain QW45, implying more metabolic flux directed into the lysine synthesis pathway. Finally, the engineered A263 and R357 were simultaneously applied to the same mutant QW55, which greatly improved lysine production. Thus, the approach demonstrated in this work could be principally used as a powerful tool to dynamically control any other undesired metabolic pathways.

Acrylamide is present in thermally processed foods, and it possesses toxic and carcinogenic properties. L-asparaginases could effectively regulate the formation of acrylamide at the source. However, current L-asparaginases have drawbacks such as poor thermal stability, low catalytic activity, and poor substrate specificity, thereby restricting their utility in the food industry. To address this issue, this study employed consensus design to predict the crucial residues influencing the thermal stability of Corynebacterium glutamicum L-asparaginase (CgASNase). Subsequently, a combination of site-point saturating mutation and combinatorial mutation techniques was applied to generate the double-mutant enzyme L42T/S213N. Remarkably, L42T/S213N displayed significantly enhanced thermal stability without a substantial impact on its enzymatic activity. Notably, its half-life at 40 °C reached an impressive 13.29 ± 0.91 min, surpassing that of CgASNase (3.24 ± 0.23 min). Moreover, the enhanced thermal stability of L42T/S213N can be attributed to an increased positive surface charge and a more symmetrical positive potential, as revealed by three-dimensional structural simulations and structure comparison analyses. To assess the impact of L42T/S213N on acrylamide removal in biscuits, the optimal treatment conditions for acrylamide removal were determined through a combination of one-way and orthogonal tests, with an enzyme dosage of 300 IU/kg flour, an enzyme reaction temperature of 40 °C, and an enzyme reaction time of 30 min. Under these conditions, compared to the control (464.74 ± 6.68 µg/kg), the acrylamide reduction in double-mutant-enzyme-treated biscuits was 85.31%, while the reduction in wild-type-treated biscuits was 68.78%. These results suggest that L42T/S213N is a promising candidate for industrial applications of L-asparaginase.

As micro-electro-mechanical systems (MEMS) technology continues its rapid ascent, a growing array of smart devices are integrating lightweight, compact, and cost-efficient magnetometers and inertial sensors, paving the way for advanced human motion analysis. However, sensors housed within smartphones frequently grapple with the detrimental effects of magnetic interference on heading estimation, resulting in diminished accuracy. To counteract this challenge, this study introduces a method that synergistically employs convolutional neural networks (CNNs) and support vector machines (SVMs) for adept interference detection. Utilizing a CNN, we automatically extract profound features from single-step pedestrian motion data that are then channeled into an SVM for interference detection. Based on these insights, we formulate heading estimation strategies aptly suited for scenarios both devoid of and subjected to magnetic interference. Empirical assessments underscore our method’s prowess, boasting an impressive interference detection accuracy of 99.38%. In indoor environments influenced by such magnetic disturbances, evaluations conducted along square and equilateral triangle trajectories revealed single-step heading absolute error averages of 2.1891° and 1.5805°, with positioning errors averaging 0.7565 m and 0.3856 m, respectively. These results lucidly attest to the robustness of our proposed approach in enhancing indoor pedestrian positioning accuracy in the face of magnetic interferences.

An electromagnetic field-assisted (EMF-assisted) laser cladding technique was used to prepare Norem02 iron-based cemented carbide coatings on 304 stainless steels. The coatings then were characterized in terms of their microstructure, microhardness, residual stress, and wear resistance. The results indicated that EMF did not change the phase composition of the Norem02 iron-based cemented carbide coating, but significantly affected its microstructure and properties. EMF accelerated the formation of more uniform and refined microstructure. With an increasing current intensity of EMF to 40 A, the dendritic and columnar crystal structure of the coating gradually transformed into uniform and fine equiaxed grains. However, when the EMF current intensity was increased to 80 A, a small number of small dendrites and columnar crystals began to appear at the top and bottom of the coating. Accordingly, the microhardness first increased, then decreased, and achieved a max of 376.9 HV0.2 at EMF current intensity of 40 A. EMF also improved the wear resistance of the coatings, reduced the cracking sensitivity, and reduced residual stress on the surface by 45.2%.

The development of campus photovoltaic buildings is a promising way to solve the problem of high energy consumption in colleges and universities. However, comprehensive study on their energy saving and environmental benefits is still insufficient. In this study, a theoretical model of a photovoltaic building roof system was preliminarily built, and the main factors affecting the power generation of campus photovoltaic buildings were analyzed. Furthermore, an experimental test platform for the campus photovoltaic building system was built, and a dynamic grid-connected strategy of “spontaneous self-use, surplus electricity connected to the grid” was creatively proposed, which points out that the grid connection rate in winter and summer vacations are about 15% and over 40%, respectively, and the annual grid connection rate is 25%. The result shows that the electricity input of the campus photovoltaic building can bear nearly 30% of the school’s annual electricity supply, which reduces the comprehensive energy consumption per unit area and per capita comprehensive energy consumption of the campus by more than 20%. The economic and environmental benefits of the 130,000 square meter campus photovoltaic building in the article are 38.8 million CNY and 20.12 million CNY, respectively, and the static investment payback period is about 7 years. The results show considerable reference value to the upgrading of campus photovoltaic buildings.

Partial substitution of synthetic nitrogen fertilizer with manure (organic substitution) is highly recommended to minimize environmental risks without compromising crop productivity in intensive agricultural systems. However, our understanding of the effect of organic substitution on soil organic carbon (OC) and total nitrogen (TN) in deep soil and its impact on crop productivity remains limited. Here we investigated OC and TN changes in soil profile down to 100 cm, crop yield, and sustainable yield index under synthetic nitrogen, phosphate, and potassium fertilizers (NPK), NPK plus straw (NPKS), and organic substitution (NPKM) treatments over two decades in four upland fields across different climate zones. Compared with the initial values, two decades of NPKM treatment significantly (p < 0.05) increased OC and TN stocks in either topsoil (by 25.6–103.8 and 15.8–89.8%) or deep soil (by 2.9–71.3 and 5.7–36.9%), respectively, across all sites. The increases in OC and TN stocks in 0–100 cm soil receiving NPKM were significantly higher than those receiving NPK at all sites and NPKS at three high-evaporation sites. Compared with NPKS and NPK treatments, crop yield and N uptake were significantly increased under NPKM treatment only at the Qiyang site. Furthermore, OC sequestration in the entire soil profile down to 100 cm and TN accumulation in topsoil exhibited significant positive correlations with crop N uptake, relative crop yield, and sustainable yield index. In conclusion, long-term partial substitution of synthetic N fertilizer with manure facilitates soil OC and TN sequestration in the entire 100 cm profile and thus maintains high crop productivity in upland areas.

Indoor positioning using smartphones has garnered significant research attention. Geomagnetic and sensor data offer convenient methods for achieving this goal. However, conventional geomagnetic indoor positioning encounters several limitations, including low spatial resolution, poor accuracy, and stability issues. To address these challenges, we propose a fusion positioning approach. This approach integrates geomagnetic data, light intensity measurements, and inertial navigation data, utilizing a hierarchical optimization strategy. We employ a Tent-ASO-BP model that enhances the traditional Back Propagation (BP) algorithm through the integration of chaos mapping and Atom Search Optimization (ASO). In the offline phase, we construct a dual-resolution fingerprint database using Radial Basis Function (RBF) interpolation. This database amalgamates geomagnetic and light intensity data. The fused positioning results are obtained via the first layer of the Tent-ASO-BP model. We add a second Tent-ASO-BP layer and use an improved Pedestrian Dead Reckoning (PDR) method to derive the walking trajectory from smartphone sensors. In PDR, we apply the Biased Kalman Filter–Wavelet Transform (BKF-WT) for optimal heading estimation and set a time threshold to mitigate the effects of false peaks and valleys. The second-layer model combines geomagnetic and light intensity fusion coordinates with PDR coordinates. The experimental results demonstrate that our proposed positioning method not only effectively reduces positioning errors but also improves robustness across different application scenarios.

In this paper, we study the effects of viscosity on the evolution of the double tearing mode (DTM) in a pair of adjacent Harris sheets based on the resistive MHD model in the NIMROD code. Similar to the tearing mode in the conventional single Harris sheet, a transition is observed in the generation of both normal and monster plasmoids at Prandtl number Pr=1. In the Pr<1 regime of the DTM, normal plasmoids (small plasmoids) are generated along with monster plasmoid, whereas in the single tearing mode (STM) cases, such a generation is not observed. When Pr is above the critical value, the generation of monster plasmoid is halted. Correspondingly, in the Pr<1 regime, a quadrupolar flow advects along the poloidal direction, but in the Pr>1 regime this flow advection is inhibited.

To overcome the safety hazard of the liquid electrolytes used in traditional lithium batteries, solid electrolytes have drawn more attention because of their advantages such as non-volatility, easy processing, good mechanical properties, and stability. In this paper, sodium alginate (SA) nanofiber membranes were used as the backbone of PEO-based solid electrolytes. SA nanofiber membranes were prepared by electrospinning with assistance from PEO and cross-linked with calcium ions to construct a nanofiber network skeleton, which provided a guarantee for the stability of the subsequent electrolyte preparation process. The effects of spinning conditions and crosslinking time on the structure and performances of the nanofiber membranes were investigated. Meanwhile, the relationship between the skeleton of nanofiber membranes cross-linked with calcium ions and ion conductivity was investigated. The optimal parameters of the electrospinning process including concentration, voltage, distance, and SA content were discussed, and the fiber diameter and its distribution were analyzed. Furthermore, Fourier transform infrared (FTIR) spectrometer, thermal gravimetric analyzer analysis (TGA), X-ray diffraction (XRD), and energy dispersive spectrometer (EDS) maps were used to characterize the nanofiber membranes and electrolytes. The results showed that the thermal performance of cross-linked nanofiber membranes improved and the crystallinity of the PEO matrix decreased. The ion conductivity of the electrolytes was characterized by electrochemical impedance spectroscopy (EIS) testing, and the results showed that the assembled lithium symmetric battery had a good ion conductivity of 6.82 × 10−5 S/cm at 30 °C.

The question of at what resolution the large eddy simulations (LESs) of a tropical cyclone (TC) high wind area may converge largely remains unanswered. To address this issue, LESs with five resolutions of 300 m, 100 m, 60 m, 33 m, and 20 m are performed in this study to simulate a high wind area near the radius of maximum wind of Typhoon Chanthu (2021) using the Weather Research and Forecasting (WRF) model. The results show that, for a limited area LES, model grid resolution may alter the local turbulence structure to generate significantly different extreme values of temperature, moisture, and winds, but it only has a marginal impact on the median values of these variables throughout the vertical column. All simulations are able to capture the turbulent roll vortices in the TC boundary layer, but the structure and intensity of the rolls vary substantially in different resolution simulations. Local hectometer-scale eddies with vertical velocities exceeding 10 m s−1 are only observed in the 20 m resolution simulation but not in the coarser resolution simulations. The ratio of the resolved turbulent momentum fluxes and turbulent kinetic energies (TKEs) to the total momentum fluxes and TKEs appears to show some convergence of LESs when the grid resolution reaches 100 m or finer, suggesting that it is an acceptable grid resolution for LES applications in TC simulations.

Zebrafish is a well-established model organism for cardiovascular disease studies in which one of the most popular tasks is to assess cardiac functions from the heart beating echo-videos. However, current techniques are often time-consuming and error-prone, making them unsuitable for large-scale analysis. To address this problem, we designed a method to automatically evaluate the ejection fraction of zebrafish from heart echo-videos using a deep-learning model architecture. Our model achieved a validation Dice coefficient of 0.967 and an IoU score of 0.937 which attest to its high accuracy. Our test findings revealed an error rate ranging from 0.11% to 37.05%, with an average error rate of 9.83%. This method is widely applicable in any laboratory setting and can be combined with binary recordings to optimize the efficacy and consistency of large-scale video analysis. By facilitating the precise quantification and monitoring of cardiac function in zebrafish, our approach outperforms traditional methods, substantially reducing the time and effort required for data analysis. The advantages of our method make it a promising tool for cardiovascular research using zebrafish.

Ochratoxin A (OTA) is the most common mycotoxin and can be found in wheat, corn and other grain products. As OTA pollution in these grain products is gaining prominence as a global issue, the demand to develop OTA detection technology has attracted increasing attention. Recently, a variety of label-free fluorescence biosensors based on aptamer have been established. However, the binding mechanisms of some aptasensors are still unclear. Herein, a label-free fluorescent aptasensor employing Thioflavin T (ThT) as donor for OTA detection was constructed based on the G-quadruplex aptamer of the OTA aptamer itself. The key binding region of aptamer was revealed by using molecular docking technology. In the absence of the OTA target, ThT fluorescent dye binds with the OTA aptamer to form an aptamer/ThT complex, and results in the fluorescence intensity being obviously enhanced. In the presence of OTA, the OTA aptamer binds to OTA because of its high affinity and specificity to form an aptamer/OTA complex, and the ThT fluorescent dye is released from the OTA aptamer into the solution. Therefore, the fluorescence intensity is significantly decreased. Molecular docking results revealed that OTA is binding to the pocket-like structure and surrounded by the A29-T3 base pair and C4, T30, G6 and G7 of the aptamer. Meanwhile, this aptasensor shows good selectivity, sensitivity and an excellent recovery rate of the wheat flour spiked experiment.

In order to simultaneously determine the values of total solar irradiance (TSI) and the Earth’s radiation at the top of the atmosphere (TOA) on board the Fengyun-3F satellite, a spaceborne relative radiometer (SRR) was developed. It adopts a dual-channel structure, including a solar radiometer channel (SR) with an unobstructed field of view (FOV) of 1.5° and an Earth radiometer channel (ER) with a wide field of view (WFOV) of 95.3° and a diameter of about 1900 km on the ground. Before the launch, both the SR and ER were calibrated. The SR, installed on the inner frame of the solar tracker of the SIM-II (solar irradiance monitor-II), is used to observe rapid changes in solar radiance with the SIAR (solar irradiance absolute radiometer), an electrical-substitution radiometer, on orbit. The ER is mounted on the U-shaped frame of the solar tracker, directly pointing in the nadir direction. Additionally, a dark space observation mode is used to determine the on-orbit background noise and lunar observation mode for on-orbit calibration. In this article, the instrument design and working principle of the SRR is first introduced, and an analysis of the measurement model of the ER, the WFOV channel of the SRR, is focused on. Finally, ground test results of the SRR are introduced.

Recent research has extensively investigated working memory (WM)-guided attention, which is the phenomenon of attention being directed towards information in the external environment that matches the content stored in WM. While prior studies have focused on the potential influencing factors of WM-guided attention, little is known about the nature of it. This attention system exhibits characteristics of two classical distinct attention systems: exogenous attention and endogenous attention, as it can operate automatically like exogenous attention yet persist for a long time and be modulated by cognitive resources like endogenous attention. Thus, the current study aimed to explore the mechanism of WM-guided attention by testing whether it competed with exogenous attention, endogenous attention, or both. Two experiments were conducted within a classic WM-guided attention paradigm. Experiment 1 included an exogenous cue and revealed an interaction between WM-guided attention and exogenous attention. Experiment 2 replaced the exogenous cue with an endogenous cue and demonstrated that endogenous attention had no impact on WM-guided attention. These findings indicate that WM-guided attention shares mechanisms with exogenous attention to some extent while operating in parallel with endogenous attention.

Lipoxygenase (EC1.13.11.12, LOX) has been potentially used in the food industry for food quality improvement. However, the low activity, poor thermal stability, narrow range of pH stability, as well as undesirable isoenzymes and off-flavors, have hampered the application of current commercial LOX. In this study, a putative mini-lipoxygenase gene from cyanobacteria, Nostoc sphaeroides (NsLOX), was cloned and expressed in E. coli BL21. NsLOX displayed only 26.62% structural identity with the reported LOX from Cyanothece sp., indicating it as a novel LOX. The purified NsLOX showed the maximum activity at pH 8.0 and 15 °C, with superior stability at a pH range from 6.0 to 13.0, retaining about 40% activity at 40 °C for 90 min. Notably, NsLOX exhibited the highest specific activity of 78,080 U/mg towards linoleic acid (LA), and the kinetic parameters—Km, kcat, and kcat/Km—attain values of 19.46 μM, 9199.75 s−1, and 473.85 μM−1 s−1, respectively. Moreover, the activity of NsLOX was obviously activated by Ca2+, but it was completely inhibited by Zn2+ and Cu2+. Finally, NsLOX was supplied in steamed bread and contributed even better improved bread quality than the commercial LOX. These results suggest NsLOX as a promising substitute of current commercial LOX for application in the food industry.

Ginsenosides, the main active compounds in Panax species, are glycosides of protopanaxadiol (PPD) or protopanaxatriol (PPT). PPT-type ginsenosides have unique pharmacological activities on the central nervous system and cardiovascular system. As an unnatural ginsenoside, 3,12-Di-O-β-D-glucopyranosyl-dammar-24-ene-3β,6α,12β,20S-tetraol (3β,12β-Di-O-Glc-PPT) can be synthesized through enzymatic reactions but is limited by the expensive substrates and low catalytic efficiency. In the present study, we successfully produced 3β,12β-Di-O-Glc-PPT in Saccharomyces cerevisiae with a titer of 7.0 mg/L by expressing protopanaxatriol synthase (PPTS) from Panax ginseng and UGT109A1 from Bacillus subtilis in PPD-producing yeast. Then, we modified this engineered strain by replacing UGT109A1 with its mutant UGT109A1-K73A, overexpressing the cytochrome P450 reductase ATR2 from Arabidopsis thaliana and the key enzymes of UDP-glucose biosynthesis to increase the production of 3β,12β-Di-O-Glc-PPT, although these strategies did not show any positive effect on the yield of 3β,12β-Di-O-Glc-PPT. However, the unnatural ginsenoside 3β,12β-Di-O-Glc-PPT was produced in this study by constructing its biosynthetic pathway in yeast. To the best of our knowledge, this is the first report of producing 3β,12β-Di-O-Glc-PPT through yeast cell factories. Our work provides a viable route for the production of 3β,12β-Di-O-Glc-PPT, which lays a foundation for drug research and development.

In this study, cadmium (Cd)-contaminated soils were bioremediated using the mixotrophic acidophiles in different scale-up cultivation stages. The free and attached bacterial and fungal diversities and community structures, and their effects on soil Cd removal were investigated. Percentages of dominant bacteria (Acidithiobacillus, Sulfobacillus, and Pseudomonas) and fungi (Acidomyces and Coniochaeta) between the free and attached communities exhibited the pronounced differences. The α-diversity of attached bacteria was higher than the free bacteria, while the distinct variations in attached and free fungi were not observed. However, the β-diversity between the free and attached bacteria and fungi was significantly changed. Solution pH and reduced glucose level affected the abundance patterns of Acidithiobacillus in free bacteria and Acidomyces in attached fungi, which had great contributions to the soil Cd removal efficiency.

Nanozymes are nanomaterials with enzyme-like activity, possessing the unique properties of nanomaterials and natural enzyme-like catalytic functions. Nanozymes are catalytically active, stable, tunable, recyclable, and versatile. Therefore, increasing attention has been paid in the fields of environmental science and life sciences. In this review, we focused on the most recent applications of nanozymes for environmental monitoring, environmental management, and environmental protection. We firstly introduce the tuning catalytic activity of nanozymes according to some crucial factors such as size and shape, composition and doping, and surface coating. Then, the application of nanozymes in environmental fields are introduced in detail. Nanozymes can not only be used to detect inorganic ions, molecules, organics, and foodborne pathogenic bacteria but are also involved in the degradation of phenolic compounds, dyes, and antibiotics. The capability of nanozymes was also reported for assisting air purification, constructing biofuel cells, and application in marine antibacterial fouling removal. Finally, the current challenges and future trends of nanozymes toward environmental fields are proposed and discussed.

Strain preservation to maintain stable vitality and the recombinant enzyme activity plays a crucial role in industrial fermentation. A Pichia pastoris strain is routinely stored at −80 °C in a glycerol vial and activated on an antibiotic-containing YPD agar plate before being used for fermentation. Alternatively, the activated strain should be preserved in the agar slant at 2~4 °C (low-temperature storage) for a short period before use. To maximize the utilization of the low-temperature storage for fermentation, we evaluated this method by observing the capacity of both the vitality and the recombinant enzyme activity of the strain at different preservation durations. We found that engineered yeast could be preserved by low-temperature storage for at least 30 months without losing its vitality and biomass enzyme activity by the end of fermentation and could be directly used for the seed cultivation of fermentation, which is more time-saving than strain recovery from −80 °C in a glycerol vial. Moreover, the antibiotic added to the agar slant could be omitted if the heterologous gene was integrated into the host chromosome. Our approach may greatly elevate the production efficiency of the strain.

The stability of diamond/aluminum composite is of significant importance for its extensive application. In this paper, the interface of diamond/aluminum composite was modified by adding nanoscale W coating on diamond surface. We evaluated the corrosion rate of nanoscale W-coated and uncoated diamond/aluminum composite by a full immersion test and polarization curve test and clarified the corrosion products and corrosion mechanism of the composite. The introduction of W nanoscale coating effectively reduces the corrosion rate of the diamond/aluminum composite. After corrosion, the bending strength and thermal conductivity of the nanoscale W-coated diamond/aluminum composite are considerably higher than those of the uncoated diamond/aluminum composite. The corrosion loss of the material is mainly related to the hydrolysis of the interface product Al4C3, accompanied by the corrosion of the matrix aluminum. Our work provides guidance for improving the life of electronic devices in corrosive environments.

We present a new scheme of picosecond optical parametric chirped pulse amplification (OPCPA) in which a Fourier-transform-limit 5.0 ps pulse is optically sheared from a single-longitudinal-mode 1064 nm CW laser. The pulse is amplified and frequency-doubled as the pump in order to maintain the pump narrow bandwidth and picosecond duration simultaneously, which is very important to ensure the high temporal contrast for an OPCPA amplifier. Combined with the cross-polarized wave generation (XPW), a compound frontend for the high-power femtosecond laser system that delivers a 1 Hz chirped pulse train is established. The experiments provide an output pulse energy of 17.1 mJ, a spectrum bandwidth 71 nm (FWHM), and a pulse duration 16.4 fs. The pulse contrast reaches 1:10−12 several picoseconds before the peak of the main pulse, which is the best value of the available measuring instruments.

Olsen phosphorus (Olsen P) is an important indicator of soil labile phosphorus. Determining the effect of fertilization on Olsen P and P fractions (labile phosphorus, medium labile phosphorus and stable phosphorus) can guide the application of phosphate fertilizer. Therefore, it is of great significance to clarify the changes of Olsen P and P fractions and the influencing factors under long-term fertilization. This study investigated changes in Olsen P and P fractions in haplic phaeozems soils (0–20 cm) in two 30-year fertilization sites (Harbin, Gongzhuling) of northern China. Four treatments were examined: treatment with no fertilizer or manure (CK), nitrogen and potassium (NK), nitrogen, phosphorus and potassium (NPK), and manure, nitrogen, phosphorus and potassium (MNPK). The results showed that after NK application, Olsen P decreased by an average of 1.5 mg kg−1 for every 100 kg ha−2 of soil phosphorus lost due to continuous phosphorus uptake by the crop; with NPK, Olsen P increased by an average of 17.6 mg kg−1 for every 100 kg ha−2 of P surplus; with MNPK, the increase curve of Olsen P was similar to an S-curve with periods of rapid growth and periods of equilibrium. In the equilibrium period of Olsen P, the equilibrium values were 52.0 and 156.2 mg kg−1 in Harbin and Gongzhuling. After 20 years of long-term different fertilization, labile P (LP), medium labile P (MLP) and stable P (SP) decreased by 21.1, 16.6 and 15.1 mg kg−1 on average for the treatment without P application (NK), and the percentage decreases were 2.8, 5.7 and 2.1%, respectively. With the treatment of NPK, LP and MLP increased by 25.5 and 79.2 mg kg−1, and the percentage increases were 1.8 and 16.1%. With the treatment of MNPK, the increase in LP and MLP was significantly higher than that with NPK. Soil organic carbon (SOC), total nitrogen (TN) and carbon/nitrogen (C/N) had the greatest effects on Olsen P and P fractions and the total contribution rate was >40%. In summary, fertilization system caused significant changes in Olsen P and P fractions. After about 20 years of long-term combined application of MNPK, the growth of Olsen P can be kept constant. SOC and TN had important effects on Olsen P and P fractions in black soil. Therefore, the application of phosphorus fertilizer should be adjusted according to the type and time of fertilization in black soil in order to avoid waste of phosphorus fertilizer.

α- and β-carotenes belong to the most essential carotenoids in the human body and display remarkable pharmacological value for health due to their beneficial antioxidant activities. Distinct high α-/β-carotene stoichiometries have gained increasing attention for their effective preventions of Alzheimer’s disease, cardiovascular disease, and cancer. However, it is extremely difficult to obtain α-carotene in nature, impeding the accumulations of high α-/β-carotene stoichiometries and excavation of their antioxidant activities. Herein, we developed a dynamically operable strategy based on lycopene cyclases (LCYB and LCYE) for concurrently enriching α- and β-carotenes along with high stoichiometries in E. coli. Membrane-targeted and promoter-centered approaches were firstly implemented to spatially enhance catalytic efficiency and temporally boost expression of TeLCYE to address its low competitivity at the starting stage. Dynamically temperature-dependent regulation of TeLCYE and TeLCYB was then performed to finally achieve α-/β-carotene stoichiometries of 4.71 at 37 °C, 1.65 at 30 °C, and 1.06 at 25 °C, respectively. In the meantime, these α-/β-carotene ratios were confirmed to result in diverse antioxidative activities. According to our knowledge, this is the first time that both the widest range and antioxidant activities of high α/β-carotene stoichiometries were reported in any organism. Our work provides attractive potentials for obtaining natural products with competitivity and a new insight on the protective potentials of α-/β-carotenes with high ratios for health supply.

Since commercial non-woven air filtering materials have unstable filtering efficiency and poor moisture permeability for the abundant condensed aerosol particles in the highly humid atmospheric environment, the PLLA/PAN composite fiber material with a hydrophobic and hydrophilic gradient structure is designed and prepared by using electrode sputtering electro spinning technology. By characterizing and testing the filtrating effect of SEM, XRD, FTIR, wettability, mechanical property, N2 adsorption isotherm, and BET surface area, NaCl aerosol of PLLA fiber, PAN fiber, and PLLA/PAN composite fiber membranes, the study found that the electrode sputtering electrospinning is fine, the fiber mesh is dense, and fiber distribution is uniform when the diameter of the PAN fiber is 140–300 nm, and the PLLA fiber is 700–850 nm. In this case, PLLA/PAN composite fiber materials gather the hydrophobicity of PLLA fiber and the hydrophilicity of PAN fiber; its electrostatic effect is stable, its physical capturing performance is excellent, it can realize the step filtration of gas-solid liquid multiphase flow to avoid the rapid increase of air resistance in a high-humidity environment, and the filtrating efficiency η of NaCl aerosol particles with 0.3 μm reaches 99.98%, and the quality factor QF 0.0968 Pa−1. The manufacturing of PLLA/PAN composite fiber material provides a new method for designing and developing high-performance air filtration materials and a new technical means for the large-scale production of high-performance, high-stability, and low-cost polylactic acid nanofiber composites.

The biomimetic olfactory and gustatory biosensing devices have broad applications in many fields, such as industry, security, and biomedicine. The development of these biosensors was inspired by the organization of biological olfactory and gustatory systems. In this review, we summarized the most recent advances in the development of detection strategies for chemical sensing based on olfactory and gustatory biomimetic biosensors. First, sensing mechanisms and principles of olfaction and gustation are briefly introduced. Then, different biomimetic sensing detection strategies are outlined based on different sensing devices functionalized with various molecular and cellular components originating from natural olfactory and gustatory systems. Thereafter, various biomimetic olfactory and gustatory biosensors are introduced in detail by classifying and summarizing the detection strategies based on different sensing devices. Finally, the future directions and challenges of biomimetic biosensing development are proposed and discussed.

Although more and more desulfurization equipment has been put into use in sintering plants, how to effectively remove sulfur dioxide from sintering flue gas in a desulfurization tower is still a great challenge in China. The desulfurization tower, as a critical part, needs further improvement and optimization. Therefore, based on the numerical simulation of the flow field of the ammonia-based wet desulfurization tower for sintering flue gas, ANSYS CFX is applied to conduct structural optimization research. Comparing the flow field distribution under different structure conditions, the results show that the flue gas distribution of the dual inlet tower is more uniform than that of the single inlet tower. The designed baffle not only effectively blocks the entry of the spray slurry, but also improves the flue gas distribution; the deflector with its simple structure, convenient operation, and stepped distribution installed in the entrance section can improve the uniformity of the flow field distribution. Based on the comprehensive analysis, these optimized structures are recommended in the design of an ammonia-based wet sintering flue gas desulfurization tower. This work not only develops a simulation of the desulfurization tower but also provides practical structures.

Understanding the effects of a fertilization regime on the long-term accumulation and transformation of soil phosphorus (P) is essential for promoting the development of sustainable management of soil P. Based on a 29-year field experiment in Mollisol, the compositions and changes of P forms using a modified Hedley sequential extraction method, solution 31P-NMR and P K-edge XANES and soil properties were investigated under continuous mono maize with and without manure (NPKM and NPK). Results showed a stronger positive related coefficient between soil total P and labile P, and mid-labile P fraction was found in NPKM than in NPK treatment. It indicated NPKM could improve the availability of soil accumulated P and reduce its transformation to stable P. Accumulated inorganic P (Pi) was dominated by aluminum phosphate (Al-P) and monobasic calcium phosphate monohydrate (MCP) for NPK treatment, Al-P, MCP, and tricalcium phosphate for NPKM treatment with XANES analysis, which contributed to the P availability in Mollisol. Moreover, the proportion of IHP with XANES and ratio of orthophosphate diesters to monoesters in NPK compared to NPKM indicated the higher Po lability with NPK treatment. Pi, especially NaHCO3-Pi and NaOH-Pi, were the potential sources of resin-Pi. Soil organic matter (SOM), organic-bound iron, and alumina oxide (Fep + Alp) showed significant influence on the transformation of P forms. Our research suggested that due to the rise in SOM and Fep + Alp, the fertilization regime significantly increased most highly active soil P fractions, especially in NPKM treatment. This work gives new insight into sustainable P management, which benefits the reduction in soil P accumulation.

The static magnetic fields (SMFs) impact on biological systems, induce a variety of biological responses, and have been applied to the clinical treatment of diseases. However, the underlying mechanisms remain largely unclear. In this report, by using human mesenchymal stem cells (MSCs) as a model, we investigated the biological effect of SMFs at a molecular and cellular level. We showed that SMF exposure promotes MSC proliferation and activates the expression of transcriptional factors such as FOS (Fos Proto-Oncogene, AP-1 Transcription Factor Subunit) and EGR1 (Early Growth Response 1). In addition, the expression of signal-transduction proteins p-ERK1/2 and p-JNK oscillate periodically with SMF exposure time. Furthermore, we found that the inhibition of the T-type calcium ion channels negates the biological effects of SMFs on MSCs. Together, we revealed that the SMFs regulate T-type calcium ion channels and mediate MSC proliferation via the MAPK signaling pathways.

The use of flexible polyurethane foam (FPUF) is severely limited due to its flammability and dripping, which can easily cause major fire hazards. Therefore, choosing an appropriate flame retardant to solve this problem is an urgent need. A coating was prepared on the FPUF surface by dipping with phytic acid (PA), Fe2(SO4)3·xH2O, and laponite (LAP). The influence of PA-Fe/LAP coating on FPUF flame-retardant performance was explored by thermal stability, flame retardancy, combustion behavior, and smoke density analysis. FPUF/PA-Fe/LAP has a good performance in the small fire test, which can pass the UL-94 V-0 rating and the limiting oxygen index reaches 24.5%. Meanwhile, the peak heat release rate values and maximum smoke density of FPUF/PA-Fe/LAP are reduced by 38.7% and 38.5% compared with those of neat FPUF. After applying PA-Fe/LAP coating, the value of fire growth rate index decreases from 10.5 kW/(m2·s) to 5.1 kW/(m2·s), dramatically reducing the fire risk. Encouragingly, the effect of PA-Fe/LAP coating on cyclic compression and permanent deformation is small, which is close to that of neat FPUF. This work provides an effective strategy for making a flame-retardant FPUF with antidripping and keeping mechanical properties.

Low catalytic activity is a key factor limiting the widespread application of type II L-asparaginase (ASNase) in the food and pharmaceutical industries. In this study, smart libraries were constructed by semi-rational design to improve the catalytic activity of type II ASNase from Bacillus licheniformis. Mutants with greatly enhanced catalytic efficiency were screened by saturation mutations and combinatorial mutations. A quintuple mutant ILRAC was ultimately obtained with specific activity of 841.62 IU/mg and kcat/Km of 537.15 min−1·mM−1, which were 4.24-fold and 6.32-fold more than those of wild-type ASNase. The highest specific activity and kcat/Km were firstly reported in type II ASNase from Bacillus licheniformis. Additionally, enhanced pH stability and superior thermostability were both achieved in mutant ILRAC. Meanwhile, structural alignment and molecular dynamic simulation demonstrated that high structure stability and strong substrate binding were beneficial for the improved thermal stability and enzymatic activity of mutant ILRAC. This is the first time that enzymatic activity of type II ASNase from Bacillus licheniformis has been enhanced by the semi-rational approach, and results provide new insights into enzymatic modification of L-asparaginase for industrial applications.

This study attempted to learn the association between maternal betaine-homocysteine methyltransferase (BHMT) gene polymorphisms, maternal dietary habits, and their interactions with the risk of ventricular septal defects (VSD) in offspring. A total of 426 mothers of VSD children and 740 control mothers were included in the study. Logistic regression was used to evaluate the level of associations and interaction effects. Our study suggested that mothers reporting excessive intake of smoked foods (aOR = 2.44, 95%CI: 1.89–3.13), barbecued foods (aOR = 1.86, 95%CI: 1.39–2.48), fried foods (aOR = 1.93, 95%CI: 1.51–2.46), and pickled vegetables (aOR = 2.50, 95%CI: 1.92–3.25) were at a significantly higher risk of VSD in offspring, instead, mothers reporting regular intake of fresh fruits (aOR = 0.47, 95%CI: 0.36–0.62), fish and shrimp (aOR = 0.35, 95%CI: 0.28–0.44), fresh eggs, (aOR = 0.56, 95%CI: 0.45–0.71), beans (aOR = 0.68, 95%CI: 0.56–0.83), and milk products (aOR = 0.67, 95%CI: 0.56–0.80) were at a lower risk of VSD in offspring. In addition, maternal BHMT gene polymorphisms at rs1316753 (CG vs. CC: aOR = 2.01, 95%CI: 1.43–2.83) and rs1915706 (CT vs. TT: (aOR = 1.81, 95%CI: 1.33–2.46) were significantly associated with increased risk of VSD in offspring. Furthermore, a significant interaction between BHMT polymorphisms and maternal bean intake was identified in the study. In conclusion, Maternal BHMT polymorphisms at rs1316753 and rs1915706, dietary habits as well as their interaction were observed to be significantly associated with the risk of VSD in offspring.

The biological taste system has the unique ability to detect taste substances. Biomaterials originating from a biological taste system have been recognized as ideal candidates to serve as sensitive elements in the development of taste-based biosensors. In this study, we developed a taste bud organoid-based biosensor for the research of taste sensation. Taste bud organoids prepared from newborn mice were cultured and loaded onto the surface of a 64-channel microelectrode array (MEA) chip to explore the electrophysiological changes upon taste; an MEA chip was used to simultaneously record multiple-neuron firing activities from taste bud organoids under different taste stimuli, which helped to reveal the role of taste buds in taste sensing. The obtained results show that taste cells separated from the taste epithelium grew well into spherical structures under 3D culture conditions. These structures were composed of multiple cells with obvious budding structures. Moreover, the multicellular spheres were seeded on a 64-channel microelectrode array and processed with different taste stimuli. It was indicated that the MEA chip could efficiently monitor the electrophysiological signals from taste bud organoids in response to various taste stimuli. This biosensor provides a new method for the study of taste sensations and taste bud functions.

Ergometrine is widely used for the treatment of excessive postpartum uterine bleeding. Claviceps paspali is a common species for industrial production of ergometrine, which is often accompanied by lysergic acid α-hydroxyethylamide (LAH) and lysergic acid amide (LAA). Currently, direct evidence on the biosynthetic mechanism of LAH and LAA from lysergic acid in C. paspali is absent, except that LAH and LAA share the common precursor with ergometrine and LAA is spontaneously transformed from LAH. A comparison of the gene clusters between C. purpurea and C. paspali showed that the latter harbored the additional easO and easP genes. Thus, the knockout of easO and easP in the species should not only improve the ergometrine production but also elucidate the function. In this study, gene knockout of C. paspali by homologous recombination yielded two mutants ∆easOhetero-1 and ∆easPhetero-34 with ergometrine titers of 1559.36 mg∙L−1 and 837.57 mg∙L−1, which were four and two times higher than that of the wild-type control, respectively. While the total titer of LAH and LAA of ∆easOhetero-1 was lower than that of the wild-type control. The Aspergillus nidulans expression system was adopted to verify the function of easO and easP. Heterologous expression in A. nidulans further demonstrated that easO, but not easP, determines the formation of LAA.

Nanomaterials play an important role in metal matrix composites (MMC). In this study, 3.0 wt.%, 6.0 wt.%, and 9.0 wt.% nano-AlN-particles-reinforced AA6061 (nano-AlN/AA6061) composites were successfully prepared by pressure infiltration technique and then hot extruded (HE) at 500 °C. The microstructural characterization of the composites after HE show that the grain structure of the Al matrix is significantly refined, varying from 2 to 20 μm down to 1 to 3 μm. Nano-AlN particles in the composites are agglomerated around the matrix, and the distribution of nano-AlN is improved after HE. The interface between AA6061 and nano-AlN is clean and smooth, without interface reaction products. The 3.0 wt.% nano-AlN/AA6061 composite shows an uppermost yield and supreme tensile strength of 333 MPa and 445 MPa, respectively. The results show that the deformation procedure of the composite is beneficial to the further dispersion of nano-AlN particles and improves the strength of nano-AlN/AA6061 composite. At the same time, the strengthening mechanism active in the composites was discussed.

In the present work, the properties of graphene-nanoplates/aluminum (GNPs/Al) composites with a heterogeneous matrix design were investigated. The advantage of the heterogeneous matrix was investigated by the finite element method. Then, 0.6 wt.% (GNPs/6061Al)/2024Al (heterogeneous matrix) and 0.6 wt.% GNPs/6061Al composites were prepared by ball milling, pressure infiltration technology, and hot extrusion. The aggregation of GNPs was eliminated and the interlayer slide of GNPs was observed. Mechanical property test results show that the mechanical properties of the heterogeneous matrix composite are better than that of a homogeneous matrix composite, including strength, elastic modulus, and plasticity. It is assumed that the heterogeneous matrix design enhances the non-uniform stress field during the deformation treatment. This improves the dispersion of GNPs, grain refinement, and produces the few-layer graphene (FLG), thus enhancing the strengthening effect of GNPs. Meanwhile, heterogeneous matrix design is thought to introduce more hardening mechanisms to increase the plasticity of materials and improve the intrinsic trade-off of strength and toughness.

The light-addressable potential sensor (LAPS) was invented in 1988 and has developed into a multi-functional platform for chemical and biological sensing in recent decades. Its surface can be flexibly divided into multiple regions or pixels through light addressability, and each of them can be sensed independently. By changing sensing materials and optical systems, the LAPS can measure different ions or molecules, and has been applied to the sensing of various chemical and biological molecules and cells. In this review, we firstly describe the basic principle of LAPS and the general configuration of a LAPS measurement system. Then, we outline the most recent applications of LAPS in chemical sensing, biosensing and cell monitoring. Finally, we enumerate and analyze the development trends of LAPS from the aspects of material and optical improvement, hoping to provide a research and application perspective for chemical sensing, biosensing and imaging technology.

Beta zeolite modified with Sn in the framework (Sn-Beta) was synthesized and introduced as a heterogeneous catalyst for Baeyer–Villiger oxidations about twenty years ago. Since then, both syntheses strategies, characterization and understanding as well as applications with the material have developed significantly. Remarkably, Sn-Beta zeolite has been discovered to exhibit unprecedented high catalytic efficiency for the transformation of glucose to fructose (i.e., aldoses to ketoses) and lactic acid derivatives in both aqueous and alcoholic media, which has inspired an extensive interest to develop more facile and scalable syntheses routes and applications for sugars transformations. This review survey the progress made on both syntheses approaches of Sn-Beta and applications of the material within catalyzed transformations of sugar, including bottom-up and top-down syntheses and catalyzed isomerization, dehydration, and fragmentation of sugars.

The Earth’s radiation budget (ERB), measured at the top of the atmosphere (TOP), quantifies the radiation imbalance between the Earth–atmosphere system and space. The ERB’s measurement accuracy depends on the observation system’s design and calibration technology. Fitting regional scanning data from polar satellite payloads is the most common way to obtain the global radiation budget. Additionally, the radiometers are calibrated by onboard stable radiation sources. We propose a new ERB radiometer operating at the Lagrange L1 point of the Earth–Moon system, which has the characteristic of observing the Earth and Moon on a hemispheric spatial scale. Hence, earth-integrated radiation can be measured directly. Furthermore, the Moon is used as a natural source for on-orbit calibration, and the attenuation of the instrument is monitored and corrected through periodic observations. This paper presents the concept of the radiometer and focuses on the design and analysis of the radiometer’s observation systems based on optical design and stray radiation suppression. The results show that the system has good imaging quality. The external stray radiation suppression reached an order of 10−8, and the thermal stray radiation can be eliminated by temperature control and compensation. The radiometer will provide long-term integrated ERB data.

Iodine has been widely used as an effective disinfectant with broad-spectrum antimicrobial potency. However, the application of iodine in an antibacterial polymer remains challenging due to its volatile nature and poor solubility. Herein, iodine immobilized UiO-66-NH2 metal-organic framework (MOF) (UiO66@I2) with a high loading capacity was synthesized and used as an effective antibacterial additive for poly(ε-caprolactone) (PCL). An orthogonal design approach was used to achieve the optimal experiments’ conditions in iodine adsorption. UiO66@I2 nanoparticles were added to the PCL matrix under ultrasonic vibration and evaporated the solvent to get a polymer membrane. The composites were characterized by SEM, XRD, FTIR, and static contact angle analysis. UiO-66-NH2 nanoparticles have a high iodine loading capacity, up to 18 wt.%. The concentration of iodine is the most important factor in iodine adsorption. Adding 0.5 wt.% or 1.0 wt.% (equivalent iodine content) of UiO66@I2 to the PCL matrix had no influence on the structure of PCL but reduces the static water angle. The PCL composites showed strong antibacterial activities against Staphylococcus aureus and Escherichia coli. In contrast, the same content of free iodine/PCL composites had no antibacterial activity. The difference in the antibacterial performance was due to the different iodine contents in the polymer composites. It was found that MOF nanoparticles could retain most of the iodine during the sample preparation and storage, while there was few iodine left in the free iodine/PCL composites. This study offers a common and simple way to immobilize iodine and prepare antibacterial polymers with low antiseptic content that would reduce the influence of an additive on polymers’ physical properties.

Aluminum alloy structures may be damaged due to wear or corrosion while in service. These damages will bring about huge financial costs, as well as a huge amount of energy consumption. There is an urgent need to search for an appropriate repair method in order to solve this problem. In this research, the cold spray process was used to repair the damages by using a mixture of powders with Al and Al2O3. A 7N01-T4 aluminum alloy plate with a factitious pit was regarded as the damaged sample. The microstructure, mechanical properties, and corrosion behavior were studied. The results showed that there were no visible perforative pores or cracks in the repaired areas. The microhardness of the repaired areas was in the range of 57.4–63.2 HV and was lower than that of the 7N01-T4 aluminum alloy. The tensile strength of the repaired samples was markedly improved compared with the unrepaired samples. The alternate immersion test results indicated that the repaired samples had the lowest rate of mass loss compared with 7N01-T4 and the unrepaired samples. After alternate immersion tests for 504 h, the repaired samples were covered with dense corrosion products. The repaired samples had a superior corrosion resistance compared to that of 7N01-T4. Thus, the cold spray process is a method of repairing damage in aluminum alloy structures.

The compound 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTCA) is an eco-friendly water treatment agent possessing flame-retardant phosphorus element and multi-carboxylic acid groups in its molecular structure. In the present work, PBTCA is employed as a finishing agent to improve the flame retardancy of the wool fabrics by the pad-dry-cure technique. The treated wool (10.2% weight gain) by 100 g/L of PBTCA showed an increased flame retardancy with a limiting oxygen index value (LOI) of 44% with a minimum char length of 40 mm. Importantly, the treated wool can self-extinguish after 30 washing cycles. The PBTCA-treated wool exhibited better stability with obviously increased char residue of 39.7% and 28.7% at 600 °C, while only 25.9% and 13.2% were measured for the control wool in nitrogen and air atmosphere, respectively. In addition, the high thermal stability of the treated wool with astonishing char-forming ability is confirmed by the SEM images of the wool after the isothermal heating treatment at different temperatures. Finally, a two-stage flame-retarding mechanism of enhanced crosslinking and char formability of PBTCA-treated wool is proposed and analyzed by infrared spectroscopy (TG-FTIR) and thermal (DSC and TGA) results of the pyrolytic volatiles of the treated wool.

After millions of years of evolution, biological chemical sensing systems (i.e., olfactory and taste systems) have become very powerful natural systems which show extreme high performances in detecting and discriminating various chemical substances. Creating field-effect sensors using biomaterials that are able to detect specific target chemical substances with high sensitivity would have broad applications in many areas, ranging from biomedicine and environments to the food industry, but this has proved extremely challenging. Over decades of intense research, field-effect sensors using biomaterials for chemical sensing have achieved significant progress and have shown promising prospects and potential applications. This review will summarize the most recent advances in the development of field-effect sensors using biomaterials for chemical sensing with an emphasis on those using functional biomaterials as sensing elements such as olfactory and taste cells and receptors. Firstly, unique principles and approaches for the development of these field-effect sensors using biomaterials will be introduced. Then, the major types of field-effect sensors using biomaterials will be presented, which includes field-effect transistor (FET), light-addressable potentiometric sensor (LAPS), and capacitive electrolyte–insulator–semiconductor (EIS) sensors. Finally, the current limitations, main challenges and future trends of field-effect sensors using biomaterials for chemical sensing will be proposed and discussed.

Acetyl-CoA is the precursor of many bio-manufacturing products and is also the hub of the cellular metabolism of energy and substances. However, acetyl-CoA is not a bulk commodity and its application is hindered due to its high cost and low yield. In this study, we screened acetyl donor candidates and utilized 10-deacetylbaccatin III-10-β-O-acetyltransferase (DBAT) in the synthesis of acetyl-CoA with CoASH as the acetyl acceptor. Among the tested candidates, acetylsalicylic acid methyl ester was identified to be the best acetyl donor, followed by acetyl-trans-resveratrol, acetylsalicylic acid ethyl ester, acetylsalicylsalicylic acid, and 4-acetoxyacetanilide. The enzymatic reaction conditions were optimized and the maximum yield of acetyl-CoA reached 14.82 mg/mL, which is the highest yield among all reported approaches to date. Meanwhile, 4.22 mg/mL of the by-product salicylic acid methyl ester, which is another industrial material, was produced. Additionally, a preliminary purification process for acetyl-CoA was established, in which 40 mg acetyl-CoA (HPLC purity > 98%) was acquired from the finished 20 mL reaction system (feeding 46 mg CoASH and 34 mg ASME) with a recovery rate of 86%. Our study lays the foundation for the large-scale production of acetyl-CoA by an enzymatic approach and will promote its application in different fields.