Search

Biomedical research seeks to generate experimental results for translation to clinical settings. In order to improve the transition from bench to bedside, researchers must draw justifiable conclusions based on data from an appropriate model. Animal testing, as a prerequisite to human clinical exposure, is performed in a range of species, from laboratory mice to larger animals (such as dogs or non-human primates). Minipigs appear to be the animal of choice for studying bone surgery around intraoral dental implants. Dog models, well-known in the field of dental implant research, tend now to be used for studies conducted under compromised oral conditions (biofilm). Regarding small animal models, research studies mostly use rodents, with interest in rabbit models declining. Mouse models remain a reference for genetic studies. On the other hand, over the last decade, scientific advances and government guidelines have led to the replacement, reduction, and refinement of the use of all animal models in dental implant research. In new development strategies, some in vivo experiments are being progressively replaced by in vitro or biomaterial approaches. In this review, we summarize the key information on the animal models currently available for dental implant research and highlight (i) the pros and cons of each type, (ii) new levels of decisional procedures regarding study objectives, and (iii) the outlook for animal research, discussing possible non-animal options.

In leathers, formaldehyde is currently analyzed according to EN ISO 17226-1 standard, by reversed phase liquid chromatography after off-line precolumn derivatization with 2,4 dinitrophenylhydrazine (DNPH) in strong acidic conditions. We first demonstrate that this standard is not adapted to leather retanned with resins likely to release formaldehyde by hydrolysis. Indeed, formaldehyde content may be largely overestimated due to concomitant resin hydrolysis (in harsh acidic conditions) that releases formaldehyde during the derivatization step and during the waiting time on autosampler before analysis. Therefore, we thoroughly studied the derivatization step in order to propose new derivatization conditions. Replacing orthophosphoric acid by less acidic buffer solutions is not enough to avoid hydrolysis. A derivatization without adding acid is realized by solubilizing DNPH in acetonitrile instead of orthophosphoric acid. These conditions lead to a complete derivatization of formaldehyde in 3 h at 50 °C (in a water bath) while avoiding the hydrolysis of co-extracted dicyandiamide and melamine resins. The as-obtained leather extracts are stable over time. Formaldehyde contents found with this method agree with the formaldehyde content measured immediately at the end of derivatization reaction in standard conditions or with formaldehyde content measured by a home-designed flow injection analysis with acetylacetone online derivatization and UV detection.

Lignocellulosic feedstocks present a growing interest in many industrial processes as they are an ecological alternative to petroleum-based products. Generally, the size of plant raw materials needs to be reduced by milling step(s), to increase density, facilitate transport and storage, and to increase reactivity. However, this unit operation can prove to be important in term of investments, functioning costs, and energy consumption if the process is not fully adapted to the histological structure of the plant material, possibly challenging the profitability of the whole chain of the biomass conversion. In this paper, the different technologies that can be used for the milling of lignocellulosic biomass were reviewed and different avenues are suggested to improve the milling performances thanks to thermal pretreatments. Based on examples on wheat straw milling, the main points to take into consideration in the choice of a milling technologies have been highlighted in regards to the specifications of ground powder. A specific focus on the hazards associated to the milling and the manipulation of fine biomass particles is also realized at the end of the paper from the perspective of industrial applications.

The comminution of lignocellulosic biomass is a key operation for many applications as bio-based materials, bio-energy or green chemistry. The grinder used can have a significant impact on the properties of the ground powders, of those of the end-products and on the energy consumption. Since several years, the milling of lignocellulosic biomass has been the subject of numerous studies most often focused on specific materials and/or applications but there is still a lack of generic knowledge about the relation between the histological structure of the raw materials, the milling technologies and the physical and chemical properties of the powders. This review aims to point out the main process parameters and plant raw material properties that influence the milling operation and their consequences on the properties of ground powders and on the energy consumption during the comminution.

Almond okara, a by-product of almond milk production, is rich in bioactive components, such as polyphenols, lipids, and alpha-tocopherol, making it a valuable functional food ingredient. This work aimed to investigate its composition while exploring two main aspects: (i) the impact of extraction time, solid-to-solvent ratio, ethanol concentration, and temperature on polyphenol recovery, and (ii) the quantification of okara’s triglycerides (TG) and alpha-tocopherol contents. The polyphenols’ optimal extraction conditions were 90 min, a 1:30 solid-to-solvent ratio (w/v), 50% ethanol, and 60 °C. These conditions achieved a total polyphenol yield of 523 mg GAE, tannin yield of 340 mg GAE, total flavonoid yield of 548 mg CE, and a total antioxidant capacity of 779 mg AAE per 100 g dry okara. The Peleg model effectively described the extraction kinetics. Additionally, TG levels, quantified by UHE/LPSFC-APCI-MS, in okara were comparable to those in almonds, and alpha-tocopherol levels, quantified by LC-UV, were 14,400 µg/100 g in almonds and 15,600 µg/100 g in okara. These findings highlight the potential of okara as a valuable resource, with a straightforward, scalable, and cost-effective solid-liquid extraction (SLE) method for polyphenols and a supercritical fluid extraction method for TG, for use in the functional food, nutraceutical, and cosmetic industries.

Sunflower is a hybrid crop that is considered moderately drought-tolerant and adapted to new cropping systems required for the agro-ecological transition. Here, we studied the impact of hybridity status (hybrids vs. inbred lines) on the responses to drought at the molecular and eco-physiological level exploiting publicly available datasets. Eco-physiological traits and leaf proteomes were measured in eight inbred lines and their sixteen hybrids grown in the high-throughput phenotyping platform Phenotoul-Heliaphen. Hybrids and parental lines showed different growth strategies: hybrids grew faster in the absence of water constraint and arrested their growth more abruptly than inbred lines when subjected to water deficit. We identified 471 differentially accumulated proteins, of which 256 were regulated by drought. The amplitude of up- and downregulations was greater in hybrids than in inbred lines. Our results show that hybrids respond more strongly to water deficit at the molecular and eco-physiological levels. Because of presence/absence polymorphism, hybrids potentially contain more genes than their parental inbred lines. We propose that detrimental homozygous mutations and the lower number of genes in inbred lines lead to a constitutive defense mechanism that may explain the lower growth of inbred lines under well-watered conditions and their lower reactivity to water deficit.

Compared to metallic hardware, an effective bone adhesive can revolutionize the treatment of clinically challenging situations such as comminuted, articular, and pediatric fractures. The present study aims to develop such a bio-inspired bone adhesive, based upon a modified mineral-organic adhesive with tetracalcium phosphate (TTCP) and phosphoserine (OPS) by incorporating nanoparticles of polydopamine (nPDA). The optimal formulation, which was screened using in vitro instrumental tensile adhesion tests, was found to be 50%molTTCP/50%molOPS-2%wtnPDA with a liquid-to-powder ratio of 0.21 mL/g. This adhesive has a substantially stronger adhesive strength (1.0–1.6 MPa) to bovine cortical bone than the adhesive without nPDA (0.5–0.6 MPa). To simulate a clinical scenario of autograft fixation under low mechanical load, we presented the first in vivo model: a rat fibula glued to the tibia, on which the TTCP/OPS-nPDA adhesive (n = 7) was shown to be effective in stabilizing the graft without displacement (a clinical success rate of 86% and 71% at 5 and 12 weeks, respectively) compared to a sham control (0%). Significant coverage of newly formed bone was particularly observed on the surface of the adhesive, thanks to the osteoinductive property of nPDA. To conclude, the TTCP/OPS-nPDA adhesive fulfilled many clinical requirements for the bone fixation, and potentially could be functionalized via nPDA to offer more biological activities, e.g., anti-infection after antibiotic loading.

Temporomandibular disorders (TMD) are complex pathologies responsible for chronic orofacial pain. Intramuscular injection of botulinum toxin A (BoNT/A) has shown effectiveness in knee and shoulder osteoarthritis, as well as in some TMDs such as masticatory myofascial pain, but its use remains controversial. This study aimed to evaluate the effect of intra-articular BoNT/A injection in an animal model of temporomandibular joint osteoarthritis. A rat model of temporomandibular osteoarthritis was used to compare the effects of intra-articular injection of BoNT/A, placebo (saline), and hyaluronic acid (HA). Efficacy was compared by pain assessment (head withdrawal test), histological analysis, and imaging performed in each group at different time points until day 30. Compared with the rats receiving placebo, those receiving intra-articular BoNT/A and HA had a significant decrease in pain at day 14. The analgesic effect of BoNT/A was evident as early as day 7, and lasted until day 21. Histological and radiographic analyses showed decrease in joint inflammation in the BoNT/A and HA groups. The osteoarthritis histological score at day 30 was significantly lower in the BoNT/A group than in the other two groups (p = 0.016). Intra-articular injection of BoNT/A appeared to reduce pain and inflammation in experimentally induced temporomandibular osteoarthritis in rats.

Diabetic foot ulcers (DFU) are among the most common complications in diabetic patients and affect 6.8% of people worldwide. Challenges in the management of this disease are decreased blood diffusion, sclerotic tissues, infection, and antibiotic resistance. Hydrogels are now being used as a new treatment option since they can be used for drug delivery and to improve wound healing. This project aims to combine the properties of hydrogels based on chitosan (CHT) and the polymer of β cyclodextrin (PCD) for local delivery of cinnamaldehyde (CN) in diabetic foot ulcers. This work consisted of the development and characterisation of the hydrogel, the evaluation of the CN release kinetics and cell viability (on a MC3T3 pre-osteoblast cell line), and the evaluation of the antimicrobial and antibiofilm activity (S. aureus and P. aeruginosa). The results demonstrated the successful development of a cytocompatible (ISO 10993-5) injectable hydrogel with antibacterial (99.99% bacterial reduction) and antibiofilm activity. Furthermore, a partial active molecule release and an increase in hydrogel elasticity were observed in the presence of CN. This leads us to hypothesise that a reaction between CHT and CN (a Schiff base) can occur and that CN could act as a physical crosslinker, thus improving the viscoelastic properties of the hydrogel and limiting CN release.

Three-dimensional printing (3DP) of thermoplastic polyurethane (TPU) is gaining interest in the medical industry thanks to the combination of tunable properties that TPU exhibits and the possibilities that 3DP processes offer concerning precision, time, and cost of fabrication. We investigated the implementation of a medical grade TPU by fused deposition modelling (FDM) for the manufacturing of an implantable medical device from the raw pellets to the gamma (γ) sterilized 3DP constructs. To the authors’ knowledge, there is no such guide/study implicating TPU, FDM 3D-printing and gamma sterilization. Thermal properties analyzed by differential scanning calorimetry (DSC) and molecular weights measured by size exclusion chromatography (SEC) were used as monitoring indicators through the fabrication process. After gamma sterilization, surface chemistry was assessed by water contact angle (WCA) measurement and infrared spectroscopy (ATR-FTIR). Mechanical properties were investigated by tensile testing. Biocompatibility was assessed by means of cytotoxicity (ISO 10993-5) and hemocompatibility assays (ISO 10993-4). Results showed that TPU underwent degradation through the fabrication process as both the number-averaged (Mn) and weight-averaged (Mw) molecular weights decreased (7% Mn loss, 30% Mw loss, p < 0.05). After gamma sterilization, Mw increased by 8% (p < 0.05) indicating that crosslinking may have occurred. However, tensile properties were not impacted by irradiation. Cytotoxicity (ISO 10993-5) and hemocompatibility (ISO 10993-4) assessments after sterilization showed vitality of cells (132% ± 3%, p < 0.05) and no red blood cell lysis. We concluded that gamma sterilization does not highly impact TPU regarding our application. Our study demonstrates the processability of TPU by FDM followed by gamma sterilization and can be used as a guide for the preliminary evaluation of a polymeric raw material in the manufacturing of a blood contacting implantable medical device.

The 2019 coronavirus outbreak and worsening air pollution have triggered the search for manufacturing effective protective masks preventing both particulate matter and biohazard absorption through the respiratory tract. Therefore, the design of advanced filtering textiles combining efficient physical barrier properties with antimicrobial properties is more newsworthy than ever. The objective of this work was to produce a filtering electrospun membrane incorporating a biocidal agent that would offer both optimal filtration efficiency and fast deactivation of entrapped viruses and bacteria. After the eco-friendly electrospinning process, polyvinyl alcohol (PVA) nanofibers were stabilized by crosslinking with 1,2,3,4-butanetetracarboxylic acid (BTCA). To compensate their low mechanical properties, nanofiber membranes with variable grammages were directly electrospun on a meltblown polypropylene (PP) support of 30 g/m2. The results demonstrated that nanofibers supported on PP with a grammage of around only 2 g/m2 presented the best compromise between filtration efficiencies of PM0.3, PM0.5, and PM3.0 and the pressure drop. The filtering electrospun membranes loaded with benzalkonium chloride (ADBAC) as a biocidal agent were successfully tested against E. coli and S. aureus and against human coronavirus strain HCoV-229E. This new biocidal filter based on electrospun nanofibers supported on PP nonwoven fabric could be a promising solution for personal and collective protection in a pandemic context.

The aim of our study was to explore the potential value of metallic (Ag, Cu, and Zn) salts, polymer/metallic nanoparticles, and chlorhexidine (CHX) for improving the antimicrobial activity of calcium hydroxide (CH) against E. faecalis and C. albicans, associated with persistent endodontic infections. A first screening was performed by determining minimum inhibitory/bactericidal concentrations (MIC/MBC). Antimicrobial activity of the CH paste mixed with metallic salts, chitosan or cyclodextrin polymer metallic nanoparticles was compared to the antimicrobial activity of CH paste alone and CH + CHX using a time-kill kinetics assay. The effect of the antimicrobials on the rheological and the key mechanical properties were also examined. Copper and zinc were discarded because of their MIC/MBC values and silver because of its kill time curve profile. Except for a slower setting time after 24 h and a higher weight loss after 1 week of incubation, the mechanical behavior of the CH paste was unaffected by the addition of CHX. Polymeric/metallic nanoparticles failed to potentiate the antimicrobial effect of CH. By contrast, CHX increased this effect and thus could help eradicate E. faecalis associated with persistent root canal infections without altering the desired key physical properties of the CH paste.

The host lymphocyte response is decisive in Pneumocystis pneumonia (PCP) pathophysiology but little is known of the specific roles of lymphocyte subpopulations in this fungal infection. Peripheral NK, NKT, B, TCD4+ and TCD8+ subpopulations were compared by immunophenotyping between 20 patients diagnosed with PCP (PCP(+)] and 20 uninfected immunosuppressed patients (PCP(−)). Among PCP(+) subjects, the lymphocyte populations were also compared between surviving and deceased patients. Low B cell count (p = 0.03), while there was no difference for the TCD4 count. Among the PCP(+) group, the 7 deceased patients had lower Th1 (p = 0.02) and Tc1 (p = 0.03) populations, higher Th2 response (p = 0.03), higher effector TCD8 (p < 0.01), lower central memory TCD8 (p = 0.04) and reduced NK cells (p = 0.02) compared with the 13 survivors. Th1/Th2 ratio < 17, CD8 Tc1 < 44%, effector TCD8 < 25%, central memory TCD8 < 4%, NK cells < 50 cells/µL and total lymphocytes < 0.75 G/L were associated with a higher risk of mortality (p = 0.003, p = 0.007, p = 0.0007, p = 0.004, p = 0.02 and p = 0.019, respectively). The traditional analysis of TCD4 and TCD8 populations may be insufficient in the context of PCP. It could be completed by using B cells to predict the risk of PCP, and by using lymphocyte subpopulations or total lymphocyte count, which are easy to obtain in all health care facilities, to evaluate PCP prognosis.

This study consisted of developing a dressing loaded with silver (Ag) and ibuprofen (IBU) that provides a dual therapy, antibacterial and antalgic, intended for infected painful wounds. Therefore, non-woven polyethyleneterephtalate (PET) textiles nonwovens were pre-treated by cyclodextrin crosslinked with citric acid by a pad/dry/cure process. Then, textiles were impregnated in silver solution followed by a thermal treatment and were then coated by Layer-by-Layer (L-b-L) deposition of a polyelectrolyte multilayer (PEM) system consisting of anionic water-soluble poly(betacyclodextrin citrate) (PCD) and cationic chitosan. Finally, ibuprofen lysinate (IBU-L) was loaded on the PEM coating. We demonstrated the complexation of IBU with native βCD and PCD by phase solubility diagram and 1H NMR. PEM system allowed complete IBU-L release in 6 h in PBS pH 7.4 batch (USP IV). On the other hand, microbiological tests demonstrated that loaded silver induced bacterial reduction of 4 Log10 against S. aureus and E. coli and tests revealed that ibuprofen lysinate loading did not interfere with the antibacterial properties of the dressing.

Vascularization is one of the main challenges in bone tissue engineering (BTE). In this study, vascular endothelial growth factor (VEGF), known for its angiogenic effect, was delivered by our developed sponge, derived from a polyelectrolyte complexes hydrogel between chitosan (CHT) and anionic cyclodextrin polymer (PCD). This sponge, as a scaffold for growth factor delivery, was formed by freeze-drying a homogeneous CHT/PCD hydrogel, and thereafter stabilized by a thermal treatment. Microstructure, water-uptake, biodegradation, mechanical properties, and cytocompatibility of sponges were assessed. VEGF-delivery following incubation in medium was then evaluated by monitoring the VEGF-release profile and its bioactivity. CHT/PCD sponge showed a porous (open porosity of 87.5%) interconnected microstructure with pores of different sizes (an average pore size of 153 μm), a slow biodegradation (12% till 21 days), a high water-uptake capacity (~600% in 2 h), an elastic property under compression (elastic modulus of compression 256 ± 4 kPa), and a good cytocompatibility in contact with osteoblast and endothelial cells. The kinetic release of VEGF was found to exert a pro-proliferation and a pro-migration effect on endothelial cells, which are two important processes during scaffold vascularization. Hence, CHT/PCD sponges were promising vehicles for the delivery of growth factors in BTE.

Toxoplasma gondii is a ubiquitous parasitic protist found in a wide variety of hosts, including a large proportion of the human population. Beyond an acute phase which is generally self-limited in immunocompetent individuals, the ability of the parasite to persist as a dormant stage, called bradyzoite, is an important aspect of toxoplasmosis. Not only is this stage not eliminated by current treatments, but it can also reactivate in immunocompromised hosts, leading to a potentially fatal outcome. Yet, despite its critical role in the pathology, the bradyzoite stage is relatively understudied. One main explanation is that it is a considerably challenging model, which essentially has to be derived from in vivo sources. However, recent progress on genetic manipulation and in vitro differentiation models now offers interesting perspectives for tackling key biological questions related to this particularly important developmental stage.

In the past, it has proved challenging to generate antibodies against mycolactone, the primary lipidic toxin A of Mycobacterium ulcerans causing Buruli ulcer, due to its immunosuppressive properties. Here we show that in vitro display, comprising both phage and yeast display, can be used to select antibodies recognizing mycolactone from a large human naïve phage antibody library. Ten different antibodies were isolated, and hundreds more identified by next generation sequencing. These results indicate the value of in vitro display methods to generate antibodies against difficult antigenic targets such as toxins, which cannot be used for immunization unless inactivated by structural modification. The possibility to easily generate anti-mycolactone antibodies is an exciting prospect for the development of rapid and simple diagnostic/detection methods.