Search

1-amino-4-methyl-piperazine (AMP) is both a starting material for the synthesis of rifampicin (RIF) and a degradation product of RIF hydrolysis. 1-methyl-4-nitroso-piperazine (MNP) is an oxidation product of AMP as well as a potentially genotoxic N-nitrosamine. The EMA and FDA have approved an ad interim limit of 5 ppm for MNP in RIF drug products. As in-house methods for the analysis of MNP in RIF use a wide range of conditions for mobile phases and sample diluents, we decided to investigate whether these conditions affect the formation of MNP and AMP. A UHPLC-MS/MS method was developed to simultaneously quantify AMP and MNP during RIF hydrolysis in buffered aqueous solutions at different pH levels. Analyses were performed in MRM mode; separations were carried out on an InfinityLab Poroshell HPH-C18 (100 mm, 2.1 mm i.d., particle size 1.9 μm). In aqueous RIF solutions, the content of AMP and MNP increases with time; at different pHs, the concentration of AMP increases much faster in acidic than in basic solutions; and the increase in MNP can be reduced by the addition of ascorbic acid. To avoid an overestimation of MNP, water should not be used as a diluent in RIF sample preparations. Methanol is a more suitable diluent than water. A standard addition method has been validated for the quantification of MNP in RIF drug substances.

N-nitrosamines are a class of carcinogenic chemical compound. Considering the large-scale application of agrochemicals globally, the elimination of N-nitrosamines from pesticides should be a priority for manufacturers and regulators. A set of methods was developed and validated for the determination of the toxicologically relevant N-nitrosamine impurity of ethalfluralin (ethyl-N-(2-methylallyl) N-nitroso amine—EMANA) in 33% w v−1 emulsifiable concentrate (EC) formulations. Solid Phase Extraction (SPE) was compared with the “dilute and shoot” approach. Gas chromatography (GC) was combined with Flame Ionization Detection (FID) and mass spectrometry (MS). For MS, two mass filtering modes (Selective Ion Monitoring—SIM, tandem mass spectrometry—MS/MS) and two ionization modes (Electron Ionization—EI, Positive chemical ionization—PCI) were applied. It was concluded that, in the case of samples with high nitrosamine concentration (>90 μg g−1), the “dilute and shoot” approach can be applied without compromising the quality of the results. SPE, however, is required to attain the LOQ (0.33 μg g−1) with good recovery (97.4–110.67%), linearity (R > 0.99) and precision (%RSD 0.68–1.74). The LOQ supersedes the limit set by EFSA (1 μg g−1) in the Technical Active Substance—TAS. The concentration range of the methods is 0.05–110 μg g−1. The methods were applied for the official surveillance program of the Greek agrochemicals market.

There has been a great focus on halogen-bonding as a unique interaction between electron-deficient halogen atoms with Lewis basic moieties. Although the application of halogen-bonded atoms in organic chemistry has been eagerly researched in these decades, the development of chiral molecules with halogen-bonding functionalities and their utilization in asymmetric catalysis are still in the\ir infancy. We have previously developed chiral halonium salts with amide functionalities, which behaved as excellent catalysts albeit in only two reactions due to the lack of substrate activation abilities. In this manuscript, we have developed chiral halonium salts with an N-nitrosamine moiety and applied them to the Mannich reaction of isatin-derived ketimines with malonic esters. The study focused on our novel bromonium salt catalyst which provided the corresponding products in high yields with up to 80% ee. DFT calculations of the chiral catalyst structure suggested that the high asymmetric induction abilities of this catalyst are due to the Lewis basic role of the N-nitrosamine part. To the best of our knowledge, this is the first catalytic application of N-nitrosamines.

A novel HPLC method with fluorimetric detection was developed for the determination of potentially carcinogenic N-nitrosodimethylamine (NDMA) and N-nitrosodiethylamine (NDEA) in active pharmaceutical ingredient enalapril maleate. N-nitrosamines were subject to denitrosation followed by derivatisation with dansyl chloride or fluorenylmethoxycarbonyl chloride (Fmoc-Cl). Fmoc-Cl offers much better sensitivity and repeatability than dansyl chloride derivatisation. A satisfactory linearity was obtained for the method, with R2 = 0.9994 for NDMA and 0.9990 for NDEA, and a limit of quantification level of 0.038 μg/g for NDMA and 0.050 μg/g for NDEA. The precision decreased with the concentration to a maximum level of about 10%. The recoveries were in the range of 74.2 ± 4.2% to 101.6 ± 16.1% for NDMA and 90.6 ± 2.9% to 125.4 ± 7.4% for NDEA. Dansyl chloride was found to be an inappropriate derivatisation agent, mainly due to potential contamination with dimethylamine, leading to unrepeatable peaks in the blank solution. Since the method involves the derivatisation of amines liberated from the N-nitrosamines, it was necessary to remove the amines from the test sample. Several critical points in the standard/sample preparation have been mentioned, which affect the reproducibility of the method and are not covered in similar articles.