Search

Background: Busulfan pharmacokinetics exhibit large inter-subject variability. Our objective was to evaluate the influence of glutathione S-transferase A1 (GSTA1) gene variants on busulfan oral clearance (CLo) in a population of patients undergoing hematopoietic stem cell transplantation. Methods: This is a quasi-experimental retrospective study in adult patients (n = 87 included in the final analyses) receiving oral busulfan. Pharmacokinetics data (area under the plasma concentration-time curve (AUC) determined from 10 blood samples) were retrieved from patients’ files and GSTA1 *A and *B allele polymorphisms determined from banked DNA samples. Three different limited sampling methods (LSM) using four blood samples were also compared. Results: Carriers of GSTA1*B exhibited lower busulfan CLo than patients with an *A/*A genotype (p < 0.002): Busulfan CLo was 166 ± 31, 187 ± 37 vs. 207 ± 47 mL/min for GSTA1*B/*B, *A/*B and *A/*A genotypes, respectively. Similar results were obtained with the tested LSMs. Using the standard AUC method, distribution of patients above the therapeutic range after the first dose was 29% for GSTA1*A/*A, 50% for *A/*B, and 65% for *B/*B. The LSMs correctly identified ≥91% of patients with an AUC above the therapeutic range. The misclassified patients had a mean difference less than 5% in their AUCs. Conclusion: Patients carrying GSTA1 loss of function *B allele were at increased risk of overdosing on their initial busulfan oral dose. Genetic polymorphisms associated with GSTA1 explain a significant part of busulfan CLo variability which could be captured by LSM strategies.

Background: Medication adherence in asthmatic patients enhances the effectiveness of treatments, but some studies in low and middle-income countries still show some limitations. Our study aimed to determine if pharmacist-led interventions could increase medication adherence, improve treatment effectiveness, and relieve symptom severity in outpatients with asthma. Methods: We conducted a randomized, controlled trial on 247 asthmatic outpatients (aged ≥ 16) with a 1:1 ratio randomization at the hospitalization time and repeated after 1-month discharge. The primary outcome was to detect the difference in medication adherence between groups. Adherence was assessed by the general medication adherence scale (GMAS). Data collected by questionnaire was coded and entered into SPSS_20 for statistical analysis; Results: 247 patients (123 intervention, 124 control) were enrolled (61.1% male). After intervention, the adherence rate was higher among the intervention group than the control group (94.3% vs. 82.8%, p = 0.001). Patient behavior and knowledge were enhanced in the intervention group (p < 0.05). Asthma symptoms were relieved in the intervention group (p = 0.014). Pharmacist-led interventions on adherence rate were higher with OR: 3.550, 95% CI: 1.378–9.143, p = 0.009. Conclusions: pharmaceutical intervention could improve medication adherence, treatment efficacy, and the outcome should not be taken for granted; further research should be carried out in this regard.

This study explores the near-surface dispersion mechanisms of contaminants in coastal waters, leveraging a comprehensive method that includes using dye and drifters as tracers, coupled with diverse observational platforms like drones, satellites, in situ sampling, and HF radar. The aim is to deepen our understanding of surface currents’ impact on contaminant dispersion, thereby improving predictive models for managing environmental incidents such as pollutant releases. Rhodamine WT dye, chosen for its significant fluorescent properties and detectability, along with drifter data, allowed us to investigate the dynamics of near-surface physical phenomena such as the Ekman current, Stokes drift, and wind-driven currents. Our research emphasizes the importance of integrating scalar tracers and Lagrangian markers in experimental designs, revealing differential dispersion behaviors due to near-surface vertical shear caused by the Ekman current and Stokes drift. During slow-current conditions, the elongation direction of the dye patch aligned well with the direction of a depth-averaged Ekman spiral, or Ekman transport. Analytical calculations of vertical shear, based on the Ekman current and Stokes drift, closely matched those derived from tracer observations. Over a 7 h experiment, the vertical diffusivity near the surface was first observed at the early stages of scalar mixing, with a value of 1.9×10−4 m2/s, and the horizontal eddy diffusivity of the dye patch and drifters reached the order of 1 m2/s at a 1000 m length scale. Particle tracking models demonstrate that while HF radar currents can effectively predict the trajectories of tracers near the surface, incorporating near-surface currents, including the Ekman current, Stokes drift, and windage, is essential for a more accurate prediction of the fate of surface floats.

Probiotics have been popularly used in livestock production as an alternative to antibiotics. This study aimed to investigate the microbiological quality and phenotypic and genotypic antimicrobial resistance of bacteria in probiotic products sold for food animals. A total of 45 probiotic products were examined for the number of viable cells, species, and antimicrobial susceptibility; the contamination of Escherichia coli and Salmonella; and the presence of 112 genes encoding resistance to clinically important antimicrobials and transferability of AMR determinants. The results showed that 29 of 45 products (64.4%) were incorrectly labeled in either number of viable cells or bacterial species. None of the tested products were contaminated with E. coli and Salmonella. A total of 33 out of 64 bacterial isolates (51.6%) exhibited resistance to at least one antimicrobial agent. Of the 45 products tested, 16 (35.5%) carried AMR genes. Almost all AMR genes detected in probiotic products were not correlated to the AMR phenotype of probiotic strains formulated in the products. Three streptomycin-resistant Lactobacillus isolates could horizontally transfer their AMR determinants. The findings demonstrated that the probiotic products could serve as reservoirs for the spread of AMR genes and may not yield benefits to animals as claimed. The need for the adequate quality control of probiotic products is highlighted.

Recently, a global market for anti-aging skin care using botanicals has been noticeably developing. Morin, 3,5,7,2′,4′-pentahydroxyflavone, is a polyphenol with many pharmacological properties including antioxidant, anti-inflammation and photoprotection. However, poor aqueous solubility of morin restricts its application in pharmaceuticals. The present study aimed to encapsulate morin into liposomal vesicles to improve its water solubility and skin penetration, and further investigated its ROS inhibition and anti-aging activity in HaCaT keratinocytes induced by particulate matters (PMs). Our data presented that morin was a strong DPPH• radical scavenger. Morin displayed a remarkable ROS inhibitory ability and protected keratinocytes against PMs by downregulating matrix metalloproteinase-1 (MMP-1) expression via suppressing p-ERK and p-p38 in the MAPK pathway. Moreover, water solubility of liposomal morin (LM) prepared by the thin film hydration method was significantly better than free form of morin due to particle size reduction of LM. Our results also demonstrated that deformable liposomal vesicles were achieved for increasing dermal absorption. Additionally, LM (morin:lecinolws-50:tween-80:PF-68, 1:2.5:2.5:5) was able to effectively reduce generation of ROS, inactivate p-ERK, p-p38 and MMP-1 in HaCaT cells exposed to PM. In conclusion, our findings suggested that LM would be a bright candidate for various topical anti-aging and anti-pollution products.

Bacterial biofilms are involved in most device-associated infections and remain a challenge for modern medicine. One major approach to addressing this problem is to prevent the formation of biofilms using novel antimicrobial materials, device surface modification or local drug delivery; however, successful preventive measures are still extremely limited. The other approach is concerned with treating biofilms that have already formed on the devices; this approach is the focus of our manuscript. Treating biofilms associated with medical devices has unique challenges due to the biofilm’s extracellular polymer substance (EPS) and the biofilm bacteria’s resistance to most conventional antimicrobial agents. The treatment is further complicated by the fact that the treatment must be suitable for applying on devices surrounded by host tissue in many cases. Nanomaterials have been extensively investigated for preventing biofilm formation on medical devices, yet their applications in treating bacterial biofilm remains to be further investigated due to the fact that treating the biofilm bacteria and destroying the EPS are much more challenging than preventing adhesion of planktonic bacteria or inhibiting their surface colonization. In this highly focused review, we examined only studies that demonstrated successful EPS destruction and biofilm bacteria killing and provided in-depth description of the nanomaterials and the biofilm eradication efficacy, followed by discussion of key issues in this topic and suggestion for future development.

Multifunctional scaffolds are becoming increasingly important in the field of tissue engineering. In this research, a composite material is developed using polycaprolactone (PCL) and detonation nanodiamond (ND) to take advantage of the unique properties of ND and the biodegradability of PCL polymer. Different ND loading concentrations are investigated, and the physicochemical properties of the composites are characterized. ND-PCL composite films show a higher surface roughness and hydrophilicity than PCL alone, with a slight decrease in tensile strength and a significant increase in degradation. Higher loading of ND also shows a higher osteoblast adhesion than the PCL alone sample. Finally, we show that the ND-PCL composites are successfully extruded to create a 3D scaffold demonstrating their potential as a composite material for tissue regeneration.

The administration of viral vectored vaccines remains one of the most effective ways to respond to the ongoing novel coronavirus disease 2019 (COVID-19) pandemic. However, pre-existing immunity to the viral vector hinders its potency, resulting in a limited choice of viral vectors. Moreover, the basic batch mode of manufacturing vectored vaccines does not allow one to cost-effectively meet the global demand for billions of doses per year. To date, the exposure of humans to VSV infection has been limited. Therefore, a recombinant vesicular stomatitis virus (rVSV), which expresses the spike protein of SARS-CoV-2, was selected as the vector. To determine the operating upstream process conditions for the most effective production of an rVSV-SARS-CoV-2 candidate vaccine, a set of critical process parameters was evaluated in an Ambr 250 modular system, whereas in the downstream process, a streamlined process that included DNase treatment, clarification, and a membrane-based anion exchange chromatography was developed. The design of the experiment was performed with the aim to obtain the optimal conditions for the chromatography step. Additionally, a continuous mode manufacturing process integrating upstream and downstream steps was evaluated. rVSV-SARS-CoV-2 was continuously harvested from the perfusion bioreactor and purified by membrane chromatography in three columns that were operated sequentially under a counter-current mode. Compared with the batch mode, the continuous mode of operation had a 2.55-fold increase in space-time yield and a reduction in the processing time by half. The integrated continuous manufacturing process provides a reference for the efficient production of other viral vectored vaccines.