Search

With the ever-growing frequency of natural catastrophe occurrences such as hurricanes, floods, earthquakes, etc., the idea of resilient microgrids (MGs) has attracted more attention than before. Providing the opportunity for a multi-carrier energy supply after a natural catastrophe can lessen power losses and improve power resiliency and reliability. Critical loads within the MG can be prioritized and restored in the shortest possible time based on the condition of the network after the damaging occurrence by considering the energy hub (EH) systems and the optimum design and allocation of these multi-carrier systems. To this end, this paper aims to address the resilience framework in MGs considering sets of water and EHs (WEHs) consisting of CHP (combined heat and power), a boiler, energy storage, and a desalination unit. This study focused on considering an effective resilient scheme to restore critical loads in a short period after a natural catastrophe when the MG experiences an unpredictable event. By applying the idea of WEHs, there would be a chance of restoring the system by using two sets of WEH systems in the appropriate islanded points to restore the system and critical loads of electricity, heat, and water. For this purpose, different scenarios were considered for assessing the resiliency of the system against a natural catastrophic event that causes serious damage to the network by analyzing the energy-not-supplied (ENS) factor. Moreover, the allocated WEHs can adequately supply the electrical, water, and thermal demand loads throughout the day after the natural catastrophe. To mitigate the unforeseen variations in the renewable sources, a battery is located in the WEH, which can attend to the optimal scheduling effectively. A scenario-based method is also introduced to improve the resiliency of MGs in an uncertain environment such as electrical, heat, and water stochastic demands. The appropriate efficiency of the offered model was considered on a modified IEEE test system.

Within microgrids (MGs), the integration of renewable energy resources (RERs), plug-in hybrid electric vehicles (PHEVs), combined heat and power (CHP) systems, demand response (DR) initiatives, and energy storage solutions poses intricate scheduling challenges. Coordinating these diverse components is pivotal for optimizing MG performance. This study presents an innovative stochastic framework to streamline energy management in MGs, covering proton exchange membrane fuel cell–CHP (PEMFC-CHP) units, RERs, PHEVs, and various storage methods. To tackle uncertainties in PHEV and RER models, we employ the robust Monte Carlo Simulation (MCS) technique. Challenges related to hydrogen storage strategies in PEMFC-CHP units are addressed through a customized mixed-integer nonlinear programming (MINLP) approach. The integration of intelligent charging protocols governing PHEV charging dynamics is emphasized. Our primary goal centers on maximizing market profits, serving as the foundation for our optimization endeavors. At the heart of our approach is the Meerkat Optimization Algorithm (MOA), unraveling optimal MG operation amidst the intermittent nature of uncertain parameters. To amplify its exploratory capabilities and expedite global optima discovery, we enhance the MOA algorithm. The revised summary commences by outlining the overall goal and core algorithm, followed by a detailed explanation of optimization points for each MG component. Rigorous validation is executed using a conventional test system across diverse planning horizons. A comprehensive comparative analysis spanning varied scenarios establishes our proposed method as a benchmark against existing alternatives.

Cyber-physical threats as false data injection attacks (FDIAs) in islanded smart microgrids (ISMGs) are typical accretion attacks, which need urgent consideration. In this regard, this paper proposes a novel cyber-attack detection model to detect FDIAs based on singular value decomposition (SVD) and fast Fourier transform (FFT). Since new research are mostly focusing on FDIAs detection in DC systems, paying attention to AC systems attack detection is also necessary; hence, AC state estimation (SE) have been used in SI analysis and in considering renewable energy sources effect. Whenever malicious data are added into the system state vectors, vectors’ temporal and spatial datum relations might drift from usual operating conditions. In this approach, switching surface based on sliding mode controllers is dialyzed to regulate detailed FFT’s coefficients to calculate singular values. Indexes are determined according to the composition of FFT and SVD in voltage/current switching surface to distinguish the potential cyber-attack. This protection layout is presented for cyber-attack detection and is studied in various types of FDIA forms like amplitude and vector derivation of signals, which exchanged between agents such as smart sensor, control units, smart loads, etc. The prominent advantage of the proposed detection layout is to reduce the time (less than 10 milliseconds from the attack outset) in several kinds of case studies. The proposed method can detect more than 96% accuracy from 2967 sample tests. The performances of the method are carried out on AC-ISMG in MATLAB/Simulink environment.

Today, in various leading power utilities in developing countries, achieving optimal operational energy management and planning, taking into account the costs reduction of generation, transmission and distribution of electricity, and also reducing the emission of an environmental pollutant becomes more and more important. Optimal use of renewable energy sources (RESs) is an effective way to achieve these goals. In this regard, in this research article, an improved multi-objective differential evolutionary (IMODE) optimization algorithm is suggested and performed to dispatch electricity generations in a smart microgrid (MG) system, taking into account economy and emission as competitive issues. In this paper, a nonlinear equation of multi-objective optimization issue with various equality and inequality limitations is formulated in order to lower the total operational costs of the MG considering environmental pollution effects simultaneously. In order to address the issue of optimal operation of the MG in single-objective and multi-objective forms, an intelligent method according to the improved differential evolutionary (IDE) optimization is utilized and performed and the proposed algorithm is implemented on different problems. First, it is assumed that there is no limit to the exchange of power overhead, and secondly, the limitation of power exchange with the upstream grid is considered. In multi-objective mode, these two modes are also considered. In order to show the impact of renewable energy on the cost, in the third part of the simulations, the operation is solved with maximum participation of renewable energy sources. In the final section, the sensitivity analysis on the number of populations in this problem is performed. The obtained results of the simulation are compared to differential evolutionary (DE) and particle swarm optimization (PSO) techniques. The effectiveness of the suggested multi-operational energy management method is confirmed by applying a study case system.