Search

Asbestos, also known by its commercial name “amianthus”, has been widely used in various industries due to its unique properties. However, the extensive use of asbestos has had serious consequences for human health, most notably asbestosis, an irreversible chronic lung disease. Asbestosis increases the risk of lung cancer and malignant mesothelioma, both of which are fatal. Applied sciences such as microscopy (optical and scanning electron microscopy) and geochemistry have been fundamental in characterizing the mineral fibers of asbestos to understand its role in human health. We previously used these techniques to characterize these fibers; in this study, we explored the issues associated with asbestos and asbestosis, as well as the challenges facing science communication strategies in effectively informing society and workers about these risks. The lack of scientific culture, in general, has led to a lack of public awareness of the risks of asbestos. As such, effective communication and outreach plans and strategies, including the visualization of the fibers to demonstrate why problems arise if inhaled, must be implemented to address these challenges. Educational campaigns, guidelines, and plans that are informative and actionable, teaching workers, communities, and the public about the risks of asbestos are crucial. A general knowledge of mineralogy and geochemistry is needed, and providing and disseminating proper scientific communication may help to close the knowledge gap. We use examples and experience from Spain and Italy to illustrate this matter, as we have been working on the characterization of ultramafic complexes in these countries for more than ten years. Additionally, because these countries have strict laws for asbestos-containing materials, they are currently involved in retiring and demolishing buildings and infrastructure that contain asbestos.

Lime stabilization is a sustainable technique due to its use of local materials, increased durability, reduced maintenance, and improved resistance to water action. This paper examines the impact of lime stabilization on the mechanical, microscopic, and mineralogical properties of a tropical soil. Two types of lime, calcitic and dolomitic, were tested at 3% and 5% by weight. Compressive, indirect tensile and flexural test results and statistical analysis revealed that calcitic lime mixtures had higher strength and stiffness, whereas dolomitic lime mixtures exhibited greater deformability with higher tensile strain at break. Scanning electron microscopy indicated that the soil’s porous matrix closed within 7 days for both lime types due to flocculation, with increased matrix interlocking over time. The calcitic lime mixture developed a more closed matrix compared to the dolomitic lime, which showed weaker cementing. X-ray diffraction analysis indicated higher consumption of clay minerals and a notable reduction in calcium hydroxide peaks in the lime-treated soils. The study concludes that calcitic lime provides better pavement performance for stabilizing the soil, enhancing its engineering properties while also being sustainable by reducing the need for raw material extraction and improving resilience to climate-related issues such as floods.

Baoshan is a world-class skarn Cu-polymetallic deposit located at the junction of the Nanling and Qin-Hang metallogenic belts in China. While there has been extensive research on the mineralogy and geochemistry of skarn deposits, studies on the fluid characteristics and evolutionary history from the early to late skarn stages in such deposits are still limited. In this study, we analyzed garnet and pyroxene from the early skarn stage and scheelite from the late skarn stage of the Baoshan deposit. We distinguished two generations of garnet (Grt1 and Grt2), one generation of pyroxene, and three generations of scheelite (Sch I, Sch II, and Sch III) on the basis of mineral assemblages and microscopic characteristics. Grt1 appears coarse-grained, and Grt2 cuts through Grt1 as veinlets. In Grt1, the andradite end-member increases from the core to the rim, while the grossular portion decreases (Ad35–36Gr59–61Sp3–4 to Ad59–61Gr36–37Sp2–3), and in Grt2, the andradite end-member significantly increases (Ad41–73Gr25–55Sp2–3). Grt1 and Grt2 have similar trace element compositions, with enrichment in Zr and depletion in Nb and Hf, depletion in LREE, enrichment in HREE, and weak negative Eu anomalies. Pyroxene coexists with Grt1 and is similarly cut by Grt2, with its composition mainly being diopside (Di82–99Hd0.6–15Jo0–3.2). Sch I and Sch II appear as anhedral to subhedral grains, while Sch III is predominantly found in veinlets. In Sch I and Sch II, most REEs enter the scheelite lattice via the Na-REE coupled substitution mechanism, with a smaller portion substituting Ca vacancies. In Sch III, the substitution mechanism involving Ca site vacancies may dominate. During the early skarn stage, the oxygen fugacity of the fluid gradually decreased from Grt1 and pyroxene to Grt2. In the late skarn stage, fluid oxygen fugacity remains stable from Sch I and Sch II to Sch III in shallow parts but significantly decreases in deeper parts. The garnet and pyroxene from the Baoshan deposit align with typical skarn Cu deposit compositions, while scheelite in the late skarn stage shows Sch I, Sch II, and shallow Sch III as skarn-type and deep Sch III as vein-type scheelite. Early skarn stage fluids were weakly acidic. Sch I, Sch II, and Sch III originated from fluids related to the Baoshan granite porphyry, with Sch III also showing evidence of water–rock interaction. This study reconstructed the fluid evolution history from the early to late skarn stages at the Baoshan deposit, providing insights into the ore-forming processes of other skarn deposits.

The new mineral calcioveatchite, ideally SrCaB11O16(OH)5·H2O, is a Ca-Sr-ordered analogue of veatchite. It was found at the Nepskoe potassium salt deposit, Irkutsk Oblast, Siberia, Russia in halite-sylvite and sylvite-carnallite rocks, with boracite, hilgardite, kurgantaite, hydroboracite, volkovskite, veatchite, anhydrite, magnesite, and quartz. Calcioveatchite forms prismatic or tabular crystals up to 1 × 1.5 × 3 mm3 and crystal clusters up to 3 mm across. It is transparent and colourless with vitreous lustre. Calcioveatchite is brittle, cleavage is perfect on {010}, the Mohs’ hardness is ca 2, Dmeas is 2.58(1), and Dcalc is 2.567 g cm−3. Calcioveatchite is optically biaxial (+), α = 1.543(2), β = 1.550(5), γ = 1.626(2), 2Vmeas = 30(10)°, and 2Vcalc = 35°. The average chemical composition (wt.%, electron microprobe, H2O calculated by stoichiometry) is: CaO 7.05, SrO 20.70, B2O3 61.96, H2O 10.22, and total 99.93. The empirical formula, calculated based on 22 O apfu = O16(OH)5(H2O) pfu, is Sr1.23Ca0.78B10.99O16(OH)5·H2O. Calcioveatchite is monoclinic, space group P21, a = 6.7030(3), b = 20.6438(9), c = 6.6056(3) Å, β = 119.153(7)°, V = 798.26(8) Å3, and Z = 2. Polytype: 1M. The strongest reflections of the powder XRD pattern [d,Å(I,%)(hkl)] are: 10.35(100)(020), 5.633(12)(110), 5.092(10)(120), 3.447(14)(060), 3.362(13)(101, 051), 3.309(38)(–102), 2.862(10)(012), and 2.585(19)(080). The crystal structure was solved based on single-crystal XRD data, R1 = 0.0420. Calcioveatchite (calcioveatchite-1M) is an isostructural analogue of veatchite-1M with the 11-fold cation polyhedron occupied mainly by Sr [Sr0.902(8)Ca0.098(8)] whereas the 10-fold polyhedron is Ca dominant [Ca0.686(7)Sr0.314(7)]. The chemical composition of veatchite from five localities in Russia (Nepskoe), Kazakhstan (Shoktybay and Chelkar in the North Caspian Region), and the USA (Tick Canyon and Billie Mine in California) was studied, and it is shown to exist in nature as a continuous, almost complete isomorphous series which extends from Ca-free veatchite, Sr2B11O16(OH)5·H2O, to calcioveatchite with the composition Sr1.14Ca0.87B10.99O16(OH)5·H2O.

The Xuanwei Formation’s claystones in the Dian-Qian District of Southwest China are rich in rare-earth elements (REEs), suggesting their potential as a source of medium and heavy rare earths. However, the REE content in these rocks is lower than other types of rare-earth deposits, and the interrelationship among clay minerals is intricate. There is no direct evidence indicating the mineralization of REEs, limiting their beneficiation and extraction. The objective of this study is the characterization of REE distribution in the Dian-Qian District. The sedimentary rocks in this district are mainly composed of kaolinite, boehmite, quartz, rutile, and pyrite. The results of continuous chemical extraction of REE-rich claystone and transmission electron microscope (TEM) observations have confirmed that REEs occurred as florencite in the rocks, and that the ion-absorption state makes only a negligible contribution to the REE content. A close relationship between florencite and kaolinite makes traditional mineral processing operations very difficult. Combined with the properties of kaolinite, roasting-acid leaching was the efficacious approach for rare-earth resources extracted from the rare earth-rich clay rocks of the Xuanwei Formation.

The widespread use of clay minerals and clays in environmental engineering, industry, medicine, and cosmetics largely stems from their adsorption properties and surface charge, as well as their ability to react with water. The dissolution and growth of minerals as a function of pH are closely related to acid–base reactions at their surface sites and their surface charge. The vivid tapestry of different types of surface sites across different types of clay minerals generates difficulties in experimental studies of structure–property relationships. The aim of this paper is to demonstrate how a mesoscale stochastic kinetic Monte Carlo (kMC) approach altogether with atomistic acid-base models and empirical data can be used for understanding the mechanisms of dissolution and surface charge behavior of clay minerals. The surface charge is modeled based on equilibrium equations for de/protonated site populations, which are defined by the pH and site-specific acidity constants (pKas). Lowered activation energy barriers for these sites in de/protonated states introduce pH-dependent effects into the dissolution kinetics. The V-shaped curve observed in laboratory experiments is reproduced with the new kMC model. A generic rate law for clay mineral dissolution as a function of pH is derived from this study. Thus, the kMC approach can be used as a hypothesis-testing tool for the verification of acid–base models for clay and other minerals and their influence on the kinetics of mineral dissolution and growth.

The age and dolomitization processes in the Paleo-oil reservoir zone, which is composed of massive dolostones found in the Qiangtang Basin (SW China), are still debated. In this research, the Long’eni-Geluguanna Area was selected. Macroscopic information, thin sections, and geochemical methods were used to investigate the dolomitization characteristics and the processes that controlled dolomitization. Five types of replacive dolomites and two types of dolomite cement were observed. Some of the dolomites displayed ghosts of primary sedimentary structures. Saddle dolomites were prevalent, occurring in the interparticle and moldic pores of the limestone which should have been filled at an early diagenetic stage. Ten microfacies types were identified. The foraminifera assemblage provides evidence that the studied interval is of Early Jurassic age. The δ13C values are similar to the contemporaneous seawater signature. The REE+Y patterns of limestones and dolostones exhibit similarities to that of seawater. The mean Na and Sr values are comparable to those of other near-normal seawater dolomites. The δ18O values of all lithologies are markedly depleted. The dolomitization started penecontemporaneously, with deposition. A general sand shoal setting with patch reefs developed. The dolomitizing fluids, near-normal seawater, was probably formed by slight evaporation on top of the shoal. Saddle dolomites in the interparticle and moldic pores might indicate hydrothermal activity, which also caused the recrystallization of some pre-existing dolomites. The recrystallization might have slightly increased the crystal size, demolished the ghost structures, formed saddle dolomites, and altered the REE+Y patterns. The recrystallization extent diminished with increasing distance from the fluids-providing fracture. Furthermore, the existence of protected areas within the sand shoal settings could enhance the vertical and horizontal heterogeneity of dolostone reservoirs.

The sulfidization-amine flotation method is commonly used for the beneficiation of zinc oxide ores. Lanping zinc oxide ores contains 8.40% zinc, with the main mineral being smithsonite; additionally, they have a high mud content. Conventional sulfidization–ammonium flotation presents a low flotation index and unsatisfactory flotation froth. A new open-circuit technology is employed to treat Lanping zinc oxide ores, where Na2S, KG-248, and dodecyl amine + sodium isoamyl xanthate + ammonium dibutyl dithiophosphate are used as the regulator, depressant, and ternary collector, respectively. Consequently, the flotation indices for the zinc grade and recovery are 28.71% and 86.24%, respectively, and the flotation froth becomes more stable. Subsequently, the flotation behavior and adsorption mechanism of smithsonite with a ternary collector are investigated. The flotation recovery of smithsonite increases to 94.40% after treatment with the ternary collector. Surface-analysis results indicate that the ternary collector can synergistically adsorb onto the sulfidized smithsonite surface to enhance its hydrophobicity, thus increasing the floatability of smithsonite. Meanwhile, the total consumption of the collector in the ternary-collector system is lower than that in the binary- or unitary-collector system.

Although boron (B) is widely applied as a paleosalinity indicator for ancient lakes, the occurrence and geological controls of B enrichment in salinized lacustrine organic-rich shale (SLORS) are poorly understood. This study addresses this issue by comparing the mineral and element compositions of high-boron shale (HBS) and low-boron shale (LBS) from the Paleogene Biyang Depression, using integrated XRD, XRF, and ICP-MS analyses. The mineral composition of HBS is dominated by illite, whereas LBS primarily consists of albite; both are of detrital origin. Compared to the element composition of UCC, HBS is extremely enriched in Mo and W, whereas LBS is extremely enriched in W and U. Boron is positively correlated with Al2O3 and negatively correlated with Na2O, suggesting that B primarily occurs in illite. An enhanced extent of chemical weathering prevailed during the deposition of HBS, providing a greater supply of illite to the basin. Higher pH levels and greater reduction during HBS deposition encouraged illite absorption of B, ultimately leading to B enrichment in shale. Our findings suggest that pH and redox conditions, as well as the mineral compositions of shale, should be fully considered during the application of B and related ratios as paleosalinity indicators.

Ore collection devices are important for the collection of deep-sea polymetallic nodules. Based on the CFD-DEM solid–liquid two-phase flow coupling calculation method, this paper simulated the rise and transport phases of polymetallic nodules using the Coanda effect ore collection device. The validity of the numerical simulation method was confirmed through experimental testing. On this basis, the effects of different working and structural parameters on the collection rate were studied. The results indicate that the flow rate of the collection jet and the bottom clearance were the primary factors affecting the collection rate of the polymetallic nodules. An increase in the collection jet flow rate leads to a substantial rise in the collection rate of polymetallic nodules. Conversely, an increase in bottom clearance results in a decrease in the collection rate. A collection rate exceeding 90% can be achieved in both scenarios: a 10 mm bottom clearance with an 8 m/s collection jet flow rate, and a 30 mm bottom clearance with a 10 m/s collection jet flow rate. The collection nozzle slant angle has no substantial impact on the collection rate, and the recommended collection nozzle slant angle is 35° to reduce energy loss.

The main ocean–continent transformation stage of the Qinling and Qilian conjunction zone happened in the Early Paleozoic with the occurrence of a lot of subduction–collision–related magmatic rocks. However, there is still considerable controversy over the duration of the subduction–collision orogeny process of the Proto-Tethys Ocean, here termed as the Wushan–Shangdan Ocean. We provide geochronological, geochemical, and Lu-Hf isotopic data for typical Early Devonian igneous rocks there, named Tailu pluton. The Tailu pluton at 410 Ma comprised K-rich, calc-alkaline, metaluminous A-type granite with low Y/Nb ratios (0.85 to 1.35) and A/CNK values (0.90 to 1.01); with high SiO2 contents (65.44 to 74.46 wt%), Mg# values (39.2 to 50.7), and zircon saturation temperatures (745 to 846 °C); and with negative εHf (t) values (−8.0 to −1.9); therefore, they resulted from the partial melting of the ancient felsic lower crust accompanied by the incorporation of mantle-derived material during the intraplate magmatism process. Research on Tailu pluton has provided more sufficient evidence for the evolution process of the Qinling–Qilian conjunction zone in the Early Paleozoic, associated with evolution of the Wushan–Shangdan Ocean, the northern part of the Proto-Tethys Ocean.

Gold, along with other highly siderophile elements, is hosted by Fe-Ni sulfide phases within peridotites and mantle melts. In this context, the lithospheric mantle emerges as a principal reservoir, providing materials crucial for the inception, augmentation, conveyance, and genesis of auriferous CO2-rich mantle fluids. EPMA and laser ablation ICP-MS data, integrated with petrographic and SEM studies, were used to assess the transfer of base and precious metals into the Earth’s crust, discerning between inputs from subduction-related processes and post-formation metasomatism. The study focuses on sulfide minerals in serpentinized peridotites of the Abu Dahr ophiolite in the Eastern Desert of Egypt. Originating in a supra-subduction setting during the Neoproterozoic era, the Abu Dahr peridotites underwent serpentinization and contain discrete sulfide minerals, including pentlandite, nickeloan pyrrhotite, millerite, chalcopyrite, and violarite. The uneven distribution of calcite ± magnesite ± serpentine veins throughout the host ophiolitic rocks reflects the intricate interplay of serpentinization and carbonation, as fO2 and fCO2 conditions fluctuated. Geochemical data of the host rocks reveal a progressive geochemical evolution marked by concurrent silicification and carbonate alteration, driven by the interaction of ultramafic rocks with hydrothermal fluids, ultimately leading to the extensive silicification and formation of birbirite. The ICP-MS data show that pentlandite contains up to 6.11 ppm of Au, pyrrhotite up to 0.41 ppm, millerite 0.34 ppm, and violarite 0.12 ppm. The gold concentration in pentlandite is significantly higher than in pyrrhotite, millerite, and violarite, which exhibit lower but detectable levels of Au. Desulfurization reactions of sulfide minerals during progressive serpentinization triggered the release and redistribution of Au as well as base metals and highly siderophile elements. Published thermodynamic modeling at temperatures below 300 °C and pressures of 50 MPa closely replicates the mineral assemblage observed in the Abu Dahr ophiolites, including sulfide assemblages and variations in major elements such as Mg and Fe. This suggests that the serpentinization process, along with associated hydrothermal fluids, played a crucial role in the mobilization and redistribution of gold, particularly affecting its incorporation into secondary sulfides. The mobilization of Au and other highly siderophile elements during serpentinization occurred in an environment marked by strong oxidation, as indicated by the presence of acicular antigorite, magnetite, millerite, and goethite intergrowths.

Laboratory flotation tests carried out using an ore sample containing Rare Earth Elements (REEs) present as monazite and bastnaesite show that the flotation of monazite is slower and yielded lower recovery than that of bastnaesite. Results show that when studying the performances of a concentration process for an REE ore, it is essential to not look only at the behavior of the individual REEs but to convert elemental assays into mineral assays to obtain the mineral’s actual response to the concentration process. The results of the laboratory flotation tests are used to calibrate a flotation simulator applied to study different circuit configurations for the concentration of the REE minerals. Indeed, it is shown that for the studied ore, two cleaning stages of a rougher concentrate are sufficient to produce a concentrate with a Total Rare Earth Oxide (TREO) grade above 40%, which is acceptable for the subsequent hydrometallurgical process. The simulation also shows that it may be feasible, if required for the hydrometallurgy step, to separate bastnaesite and monazite by taking advantage of the different flotation kinetics of the two minerals.

The Songpan–Ganzi Orogenic Belt (SGOB) is bounded by the South China, North China, and Qiangtang blocks and forms the eastern margin of the Tibetan Plateau. The Tiechanghe Granite is located at the junction of the southeast margin of the SGOB and the western margin of the Yangtze Block. To elucidate the genetic relationship between the Tiechanghe Granite and the surrounding molybdenum deposits in Western Sichuan, in this study, we conducted zircon U-Pb and molybdenite Re-Os isotopic dating. The results indicate that the Tiechanghe Granite predominantly consists of monzogranite, with minor occurrences of syenogranite, while the molybdenum deposits are mainly found in skarn and quartz veins. The laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) zircon U-Pb ages of the Tiechanghe Granite range from 162.9 ± 0.7 Ma (MSWD = 0.31, n = 25) to 163.4 ± 0.6 Ma (MSWD = 0.85, n = 26), and the LA-ICP-MS zircon U-Pb age of the pegmatite veins is 164.1 ± 0.9 Ma (MSWD = 1.3, n = 19). These ages are consistent with the weighted average Re-Os age of the Ziershi molybdenite (160.3 ± 1.6 Ma, n = 2) within the error margins. These findings and previously obtained magmatic and metallogenic ages for the region suggest that a magmatic and mineralization event involving granite, molybdenum, tungsten, and copper occurred at around 162–164 Ma in the study area. This discovery broadens the exploration perspective for mineral resources in the Jiulong area of Western Sichuan and the entirety of Western Sichuan.

Geochemical measurements of stream sediments are practical for small-scale mineral exploration. However, traditional grid interpolation methods cause element concentrations to diffuse and smooth out anomalies, particularly in complex terrains, making it challenging to reflect the actual distribution of elements accurately. We applied the Dynamic Enhanced Weighted Drainage Catchment Basin (DE-WDCB) method to enhance the retention and identification of local anomalies by limiting the scope of analysis to specific drainage units. This method reduces interference from varying background values across different watersheds, effectively enhancing geochemical element anomalies and aligning better with geomorphic conditions. The DE-WDCB method was tested in the Duobaoshan–Heihe area, a significant copper polymetallic mineral district in northeastern China. Compared with traditional grid interpolation methods, the DE-WDCB method retained and strengthened low and weak abnormal information of favorable mineralization elements, particularly in the Luotuowaizi area. The method demonstrated a higher spatial coverage rate with mineral points and a more vital ore-indicating ability. Specifically, the DE-WDCB method identified anomalies with a mean accuracy of 63.57% (p < 0.05, 95% CI: 47.64%–79.50%), compared to 50.53% for traditional methods. In conclusion, in regions with a complex topography and watershed differences, the DE-WDCB method effectively reduces local geochemical background interference, accurately identifies low and weak geochemical anomalies, and better reflects the actual distribution of elements. This makes it a significantly advantageous method for geochemical anomaly extraction, delineating higher-confidence exploration targets in the Sandaowan–Luotuowaizi area in the east and the triangular area between Duobaoshan, Yubaoshan, Sankuanggou, and the midstream highlands of the Guanbird River in the west.

Maseve Mine is located in the western limb of the Bushveld Complex, recognized as the largest layered igneous intrusion in the world. The study shows results from surface (SP1, SP2, and SP3) and tunnel (T3a, T3b, and TP4b) reflection seismic profiles, totaling 4150 m. Tunnel seismic data were acquired using a seismic landstreamer and spiked geophones with 5 m receiver and shot spacing, as well as a sledgehammer for shots due to space constraints and safety. The profiles, 10–50 m above mineral deposits, crossed major geological structures. Surface seismic profiles used cabled systems and wireless sensors with 5 m and 10 m receiver spacing, respectively, and a 500 kg drop hammer as a source with 10 m shot spacing. Despite high noise levels from mine infrastructure and power cables, a careful processing workflow enhanced target reflections. Interpretation was constrained using borehole data, geological models, and 2D/3D seismic modeling. The processed data exhibit gently dipping reflections associated with faults and dykes, imaging the target mineralization (Merensky Reef and Upper Group 2) and a possible extension. Tunnel seismic experiments demonstrated the application of seismic methods using in-mine infrastructure, while surface experiments proved efficient, illustrating small-scale seismic surveys’ capability to image the subsurface, adding value in active mining environments for exploration with cost-effective seismic equipment.

This work is mainly concerned with the effect of anthropogenic activities, the presence of black sand spots, factory construction, and shipping, in addition to other activities like agriculture, on soil heavy metal pollution along the Mediterranean shores of Lake El-Burullus, Egypt, to assess the contamination levels and to identify possible sources and the distribution of these metals. This study focuses on the various heavy metal contamination levels in El-Burullus Lake coastal sediments. Sediment samples were collected and analyzed by the XRF technique for heavy metals, including Cr, Cu, Ni, Zn, Zr, Pb, Ba, Sr, Ga, Rb, V, and Nb. Statistical analyses, including correlation coefficient, factor analysis, and cluster analysis, were employed to understand the interactions and sources of these metals. The highest concentrations recorded were for Zr (84–1436 mg/kg) and Pb (1–1166 mg/kg), with average concentrations of 455.53 mg/kg and 79.27 mg/kg, respectively. Cr, Zr, Nb, and Pb showed average values higher than the average shale concentration, indicating potential pollution. Correlation analysis revealed strong associations between several metals, suggesting common sources of both natural and anthropogenic origin and similar distribution patterns. Factor analysis indicated four main factors accounting for 94.069% of the total variance, with the first factor heavily dominated by Cr, Ni, Zn, and Ba. The contamination factor (Cf) and degree (DC) analyses revealed varying contamination levels, with most metals exhibiting the greatest values in the western half of the area. The pollution load index (PLI) indicated high-quality sediment samples without significant pollution. Our findings highlight the importance of continued monitoring and management techniques to reduce possible environmental and health concerns associated with these pollutants.

A large amount of pyrite concentrate slag washing solution is produced in China every year, and this contains valuable components such as Cu2+ and Au. The traditional treatment method not only pollutes the environment but also wastes metal resources. For the washing solution containing Cu2+ 437 mg/L and Au 0.13 mg/L, two new processes comprehensive recovery schemes were developed and compared in this paper, namely iron powder replacement pore filtration and neutralization precipitation pore filtration. When the iron powder replacement pore filtration process was adopted, Cu2+ and Au were mainly comprehensively recovered in the form of a mixture of sponge copper and particulate gold. The test results showed that the replacement optimal conditions involved a pH of 3.0, iron powder dosage of 6 g/L, and replacement time of 3.0 h. After replacement, the filter cloth with below 1 μm pore size was used for filtration. The recovery rate of Cu2+ in the washing solution was 98.13 and the total recovery rate of Au was 95.83%. Otherwise, when the neutralization precipitation pore filtration process was adopted, Cu2+ and Au were mainly comprehensively recovered in the form of a mixture of copper hydroxide and particulate gold. The test results showed that sodium hydroxide was used as the precipitant and the optimum neutralization pH value was 6.5. After precipitation, the filter cloth with a below 1 μm pore size was used for filtration. The recovery rate of Cu2+ in the washing solution was 97.35% and the total recovery rate of Au was 93.54%. The economic benefit estimation of the two processes showed that the neutralization precipitation pore filtration process had the advantages of low material consumption, low cost and high economic benefit.

The increased exploitation of ores leads to the generation of mining waste, which has a negative impact on the environment and human health. For this reason, it is necessary to take care of it in an adequate way by applying some of the possible treatments. In addition to protecting the environment by applying appropriate treatment, there is also the possibility of making a profit by valorizing useful elements from mining waste. In order to choose the most adequate treatment, it is necessary to perform the characterization of mining waste. This paper contains a detailed characterization of the flotation tailings deposited at the Old Flotation Tailings in eastern Serbia, originating from copper ore processing. Characterization includes physico-chemical analysis, polarizing microscope analysis, X-ray Diffraction analysis (XRD) and Scanning Electron Microscopy with Energy Dispersive Spectroscopy (SEM-EDS) analysis analysis. The obtained results indicate that the investigated flotation tailings can be used as a secondary raw material for metal recovery, in this case primarily copper (whose content is about 0.24%), gold (with a content of about 0.43 ppm) and silver (with a content of about 1.7 ppm). Considering that the content of valuable elements is quite low, it is suggested to apply hydrometallurgical treatment for their recovery.

Cone crushers have a central role in the processing of quarry rocks, besides coarser ore preparation in several mineral processing plants. This is particularly true in the case of Itabirite iron ore preparation plants in Brazil, so optimizing their performance is of central importance for reaching maximum productivity of the circuit. The work presents results of modeling the HP500 cone crusher in operation in an industrial plant in Brazil (Minas Rio), from surveys carried out over a few years with different feeds and crushing conditions. A version of the Andersen–Whiten cone crusher model was implemented in the Integrated Extraction Simulator featuring a non-normalizable breakage response and a fit-for-purpose throughput model. The results demonstrate the good ability of the model to predict crusher performance when dealing with different closed-side settings and feed size distributions.

In this paper, the process of solid-state metalized reduction and magnetic separation was investigated for preparation of nickel–iron concentrate from a low-grade laterite nickel ore. The effects of reduction temperature, reduction time, amount of dosages, and magnetic field strength on grades and recoveries of nickel and iron were studied. The results showed that nickel–iron concentrate with a nickel grade of 7.32%, nickel recovery of 81.84%, iron grade of 78.74%, and iron recovery of 69.78% were obtained under the conditions of a reduction temperature of 1200 °C, reduction time of 120 min, calcium fluoride addition of 12%, ferric oxide addition of 10%, coal addition of 12%, and magnetic field strength of 170 kA/m.

Coal extraction in China is increasingly moving towards colder regions such as Xinjiang and Inner Mongolia. However, these mines face land restoration challenges due to a scarcity of fertile topsoil. This study explores the potential of coal gangue, a mining byproduct, as a viable substitute for topsoil. The study examines the effects of humidity fluctuations and freeze–thaw cycles, both individually and in combination, on the weathering disintegration of coal gangue. Coal gangue samples were subjected to controlled laboratory conditions simulating environmental factors. Fourteen interventions were analyzed, and the findings indicated that the combined application of humidity and freeze–thaw cycles significantly accelerated the disintegration process, outperforming the individual interventions. In addition, it was found that significant temperature variations caused the moisture and salts within the gangue to expand, which affected the rate of disintegration. The study showed that the rate of weathering disintegration was significantly higher in conditions of saturated humidity–freeze–thaw cycles compared to unsaturated humidity conditions. This highlights the essential role of ice crystals in accelerating the weathering process during temperature fluctuations. This study highlights the importance of humidity over temperature in the weathering and disintegration of coal gangue. It also suggests that freeze–thaw cycles can enhance this process. The study provides valuable insights for the management and utilization of coal gangue in cold and arid regions.

In order to examine further the characteristics of micropore-throat structures of the tight oil reservoir in the Jiufotang Formation in the Houhe region, this study used whole rock X-ray diffraction, routine physical property analysis, and routine thin section observations to analyze the material composition and physical properties of the tight oil reservoir. CT scanning, high-pressure mercury infiltration, and other test methods were employed to analyze the characteristics of the pore-throat structures in the tight oil reservoir. In addition, the Pearson correlation coefficients quantified the relationships between nine parameters and pore-throat structures. The parameters with high correlations were optimized for analysis, and a comprehensive classification scheme for micropore-throat structures in the tight oil reservoir in the study area was established. The results show that the reservoir in the Jiufotang Formation in the Houhe region is composed of feldspathic and lithic arkosic sandstone, with feldspar and clast pore dissolution pores as the main type of reservoir pore space. The tight oil reservoir has small pore-throat radius, complex structures, poor connectivity, and high heterogeneity. It generally contains micron-sized pores with submicron to nanometer throat widths and small- and medium-sized pores to fine micropore-throat structures. Porosity, permeability, coefficient of variation, skewness coefficient, and average pore-throat radius, were selected for k-means cluster analysis. The micropore-throat structures of the tight oil reservoir were divided into three categories: classes I, II, and III. The study area is dominated by class II pore throats, accounting for 58%. Diagenesis mainly controls the pore-throat structure. These results provide an effective reference for the identification and evaluation of favorable sweet spots in tight oil reservoirs in similar blocks in China.

A high-resolution seismic survey (HRSS) is often used in coal exploration to bridge the data gap between two consecutive boreholes and avoid ambiguity in geological interpretation. The application of high-resolution seismic surveys in the Indian context is challenging as the delineation of thin non-coal layers within the coal layer requires a very high seismic data resolution. However, conventional seismic processing techniques fail to resolve thin coal/non-coal layers and faults, which is crucial for the precise estimation of coal resources and mine economics. To address these issues, we applied the inverse continuous wavelet transform deconvolution (ICWT-Decon) technique to post-stack depth-migrated seismic sections. We examined the feasibility of the ICWT-Decon technique in both a synthetic post-stack depth-migrated model and 2D/3D seismic data from the North Karanpura and Talcher Coalfields in Eastern India. The results offered enhanced seismic sections, attributes (similarity and sweetness), and acoustic inversion that aided in the precise positioning of faults and the delineation of a thin non-coal layer of 4.68 m within a 16.7 m coal seam at an approximate depth of 450 m to 550 m. This helped in the refinement of the resource estimation from 74.96 MT before applying ICWT-Decon to 55.92 MT afterward. Overall, the results of the study showed enhancements in the seismic data resolution, the better output of seismic attributes, and acoustic inversion, which could enable more precise lithological and structural interpretation.

Gold grains are observed in a variety of forms, such as coarse-liberated native gold grains, and ultra-fine grains associated with sulfide or non-sulfide mineral particles, in the form of solid solution in sulfide minerals, mainly pyrite. In the flotation of gold ores, bulk sulfide mineral flotation is generally applied to maximize gold recovery. This approach gives high gold recoveries, but it also causes the recovery of barren sulfide minerals (i.e., sulfide mineral particles with no gold content), which increases concentrate tonnage and transportation costs and reduces the grade sometimes to below the saleable limit (approx. 10 g/t Au). This study addresses the differences between gold-bearing and barren pyrite particles taken from various ore deposits and utilizes these differences for the selective flotation of gold-bearing pyrite. The laboratory scale flotation tests conducted on three pyrite samples having different cyanide soluble gold contents show that a selective separation between gold-bearing pyrite and barren pyrite particles could be achieved under specific flotation conditions. Gold recovery is correlated directly with the cyanide-soluble gold in the ore samples. Electrochemical experiments were conducted to elucidate the differences in surface properties of the two types of pyrite. The barren pyrite particles were more cathodic and prone to cathodic reduction of OH− and depressant ions on the surface, and they could be depressed effectively without significantly affecting the gold-bearing particles.

Layered cemented filling leads to a layered composite structure of cemented tailings backfill (CTB) composed of high-strength top and bottom layers, as well as a low-strength middle layer. To solve the problem of the low mechanical properties of the middle layer caused by layered filling, this study proposes the concept of an enhance layer, that is, an enhance layer is added to the middle weak layer to improve its overall mechanical properties. To explore the characteristics of strength, failure modes, energy dissipation, and progressive damage of stratified cemented tailings backfill (SCTB) with varying layered structures, the uniaxial compressive tests of SCTB specimens with enhance layers c/t of 1:15, 1:10, and 1:6, as well as height proportions of 0.1, 0.2, and 0.3, are examined. The results show that the elastic modulus and uniaxial compressive strength (UCS) of SCTB samples increase with the height ratio and cement-to-tailings ratio of the enhance layer. The elastic modulus and strength of SCTB specimens is more sensitive to the height ratio of the enhance layer than the c/t ratio. Moreover, the SCTB specimens mainly manifested as tensile failure of the upper layer and lower layer, but they did not penetrate the entire specimen. The propagation of cracks is limited by the addition of the enhance layer. The SCTB specimens have stronger plastic deformation ability, and a large part of the all-strain energy is dissipated in the shape of plastic failure. In addition, a constitutive model for damage in SCTB samples has been developed. The SCTB samples with a reasonable structure can also achieve sufficient strength compared to directly increasing the c/t ratio of CTB specimens while reducing the cost of cemented tailings backfill preparation. This approach reduces the carbon footprint of the mining industry and improved the overall mechanical properties and stability of the stratified cemented tailings backfill. This study provides a new approach for high-stage subsequent stope backfilling. The findings will offer guidance for the design of a layered filling mining method.

Froth flotation, a widely used mineral beneficiation technique, generates substantial volumes of data, offering the opportunity to extract valuable insights from these data for production line analysis. The quality of flotation data is critical to designing accurate prediction models and process optimisation. Unfortunately, industrial flotation data are often compromised by quality issues such as outliers that can produce misleading or erroneous analytical results. A general approach is to preprocess the data by replacing or imputing outliers with data values that have no connection with the real state of the process. However, this does not resolve the effect of outliers, especially those that deviate from normal trends. Outliers often occur across multiple variables, and their values may occur in normal observation ranges, making their detection challenging. An unresolved challenge in outlier detection is determining how far an observation must be to be considered an outlier. Existing methods rely on domain experts’ knowledge, which is difficult to apply when experts encounter large volumes of data with complex relationships. In this paper, we propose an approach to conduct outlier analysis on a flotation dataset and examine the efficacy of multiple machine learning (ML) algorithms—including k-Nearest Neighbour (kNN), Local Outlier Factor (LOF), and Isolation Forest (ISF)—in relation to the statistical 2σ rule for identifying outliers. We introduce the concept of “quasi-outliers” determined by the 2σ threshold as a benchmark for assessing the ML algorithms’ performance. The study also analyses the mutual coverage between quasi-outliers and outliers from the ML algorithms to identify the most effective outlier detection algorithm. We found that the outliers by kNN cover outliers of other methods. We use the experimental results to show that outliers affect model prediction accuracy, and excluding outliers from training data can reduce the average prediction errors.

The aim is to explore new depressants for achieving the efficient separation of apatite and dolomite. In this work, fucoidan (FD) was examined as an eco-friendly dolomite depressant to separate dolomite from apatite. The depression ability and adsorption mechanisms were investigated. The flotation results indicated that FD selectively depressed dolomite. The flotation difference between dolomite and apatite reached 70% approximately at an FD concentration of 75 mg/L. Meanwhile, the recovery and grade of P2O5 reached 89.84% and 32.88% and that of MgO decreased to 1.64% and 34.24% in the artificially mixed minerals test. Wettability, zeta potential, and Fourier transform infrared spectroscopy (FTIR) results revealed that FD tended to adsorb onto dolomite, impeding the interaction of sodium oleate (NaOL) with dolomite, but barely affected that on apatite. Microcalorimetry analysis indicated that the adsorption heat of FD on dolomite was much higher and less time was required to achieve equilibrium. X-ray photoelectron spectroscopy (XPS) results proved that the sulfonic acid radicals within FD chemically interacted with Mg atoms on dolomite while it weakly adsorbed on apatite.

The Qiushuwan Cu-Mo deposit, situated in the East Qinling molybdenum belt, is a notable mining site renowned for its considerable quantities of medium-sized molybdenum. The goal of this study is to improve comprehension and identify additional mineral resources by conducting a thorough examination of the mine using the spread spectrum-induced polarization (SSIP) technique. Gathering SSIP data, conducting geological investigations, and examining the electrical characteristics of rock and mineral samples along Profile-80 led to significant discoveries. The investigation identified two significant ore bodies with high conductivity: C2, linked to granite porphyry and molybdenum veins, and C4, associated with a skarn deposit containing a concentrated amount of copper ore. This study used resistivity models created from SSIP data to find out how conductivity changed in different parts of the research area. Additional drill verifications validated these findings, indicating the presence of potential mineral resources. The petrographic analysis of core samples showed that minerals like pyrite, molybdenite, chalcopyrite, epidote, calcite, and garnet were present. Notably, the samples frequently contained both pyrite and molybdenite together. Sample 04-2 contained substantial quantities of molybdenite and pyrite; Sample 05-1 had occasional pyrite; and Sample 07-4 included both pyrite and chalcopyrite. These findings offer useful insights for evaluating the magnitude and economic feasibility of the mineral deposits; however, additional investigation is required to completely comprehend the scope of the resources. The integration of borehole data and the alignment of geological sections with inversion models confirmed the validity of the conclusions. The core samples that were retrieved show a lot of different minerals, including valuable ores and minerals that have been changed. Pyrite and molybdenite are always found together. These findings establish a solid basis for further investigation and the sustainable management of resources. This study contributes to the understanding of the Qiushuwan Cu-Mo deposit and advances exploration techniques using the spread spectrum-induced polarization (SSIP) method. It provides useful information for geologists, mining professionals, and stakeholders involved in resource usage.

A unique Li–Na metasomatic rock from Iwagi Islet in Southwest (SW) Japan is an episyenite that contains new Li-rich minerals, including sugilite, katayamalite, murakamiite, and ferro-ferri-holmquistite. We present petrographical, mineralogical, and geochronological data for the protoliths and episyenite. We classified the metasomatic rocks based on the mineral assemblages, from the protolith biotite granite to albitized granite, quartz albitite, hedenbergite albitite, aegirine albitite, sugilite albitite, and katayamalite albitite. The protolith of hedenbergite albitites may have been metasomatic granite that has been subjected to calcic skarnization. Albitites are formed related to fractures and shear zones that focused the fluid flow and metasomatism. Extensive albitization and formation of abundant Li minerals requires involvement of external Li-Na-Cl-rich fluids, which might be related to deep high-temperature Arima-like brines derived from dehydration of the subducted oceanic slab. Formation of the albitites began with quartz dissolution and vug formation, and record interface-coupled dissolution–reprecipitation processes in an open system. The 40Ar/39Ar age of 91.5 ± 0.3 Ma determined for the katayamalite is slightly younger than the protolith zircon U–Pb age of 93.5 ± 1.7 Ma (Turonian), reasonably explaining the timing of Li–Na metasomatism after the petrogenesis of host granites.

The ion-adsorption-type rare earth element (iREE) deposits dominantly supply global resources of the heavy rare earth elements (HREEs), which have a critical role in a variety of advanced technological applications. The initial enrichment of REEs in the parent granites controls the formation of iREE deposits. Many Mesozoic and Cenozoic granites are associated with iREE mineralization in the Tengchong block, Southwest China. However, it is unclear how vital the mineralogical and geochemical characteristics of these granites are to the formation of iREE mineralization. We conducted geochronology, geochemistry, and Hf isotope analyses of the Yingpanshan–Damanbie granitoids associated with the iREE deposit in the Tengchong block with the aims to discuss their petrogenesis and illustrate the process of the initial REE enrichment in the granites. The results showed that the Yingpanshan–Damanbie pluton consists of syenogranite and monzogranite, containing REE-bearing accessory minerals such as monazite, xenotime, apatite, zircon, allanite, and titanite, with a high REE concentration (210–626 ppm, mean value is 402 ppm). The parent granites have Zr + Nb + Ce + Y (333–747 ppm) contents and a high FeOT/MgO ratio (5.89–11.4), and are enriched in Th (mean value of 43.6 ppm), U (mean value of 4.57 ppm), Zr (mean value of 305 ppm), Hf (mean value of 7.94 ppm), Rb (mean value of 198 ppm), K (mean value of 48,902 ppm), and have depletions of Sr (mean value of 188 ppm), Ba (mean value of 699 ppm), P (mean value of 586 ppm), Ti (mean value of 2757 ppm). The granites plot in the A-type area in FeOT/MgO vs. Zr + Nb + Ce + Y and Zr vs. 10,000 Ga/Al diagrams, suggesting that they are A2-type granites. These granites are believed to have formed through the partial melting of amphibolites at a post-collisional extension setting when the Tethys Ocean closed. REE-bearing minerals (e.g., apatite, titanite, allanite, and fluorite) and rock-forming minerals (e.g., potassium feldspar, plagioclase, biotite, muscovite) supply rare earth elements in weathering regolith for the Yingpanshan–Damanbie iREE deposit.

Variations in the recovery of platinum group metals (PGMs) are often attributed to mineralogical and other natural ore-type variations. To increase the recovery of PGMs by the flotation process, a comprehensive understanding of gangue and valuable minerals is essential for optimising the extraction and processing of metals. Recoveries may be improved if the questions of how, where, and why losses occur can be answered with a certain degree of confidence. A requirement is the availability of statistically reliable mineralogical data. The PGMs of MG-1–4 chromite tailings dumps of the western limb of the Bushveld complex (BC) were studied in detail to unravel the PGMs and the nature of the platinum group minerals in the sample. Characterisation of the chromite tailings via deportment analysis revealed that the sample contained a significant amount of 3E PGM + Au (Pt, Pd, Ru, and Au) and was concentrated in the -25 µm fraction. The results of automated mineralogical analysis showed that the sample was composed of the PGE-sulphides group, comprising 63.6 vol%, PGE-sulfarsenides 10.4 vol%, PGE-arsenides 1.3 vol%, PGE-bismuth tellurides 3.3 vol%, PGMs-alloy 4.1 vol%, and Laurite comprising 17.3 vol% of the total PGE population. The sample was composed of 66.5 vol% of liberated PGMs, 0.2 vol% attached to liberated BMS, 27.3 vol% of PGMs attached to or locked within silicate or oxide gangue composite particles, 0.2 vol% of PGMs associated with BMS attached to silicate or oxide gangue particles, and a low proportion (5.8 vol%) of PGMs reported being locked within gangue or oxide particles. The majority of PGM grains observed were reported in the fast-floating category (64.4 vol%), 27.6 vol% in the slow-floating 1 category, 2.2 vol% in the slow-floating 2 category, and 5.8 vol% to the non-floating category. The results of the study revealed that the PGMs of MG 1–4 chromite tailings were liberated; however, the low liberation index (

Carbonado is a specific variety of diamonds, typical representatives of which are distributed in the diamond placers of Central Africa, Brazil, and Venezuela. Carbonado consists of the microcrystalline aggregates of diamonds, with inclusions of mineral matter. These aggregates appear as fragments that are rounded to varying degrees. Carbonado has been known for a long time, but its primary sources have not been found and its genesis remains unclear. We have substantiated the hypothesis that the most probable precursor of carbonado is shungite. Shungite is a specific form of non-crystalline, non-graphitic, fullerene-like carbon. Shungite rocks, currently known in Karelia (Russia), are natural microdispersed composite materials containing shungite—carbonaceous matter and mineral components of different compositions. The content of carbonaceous matter in shungite rocks is from less than 10% to 98%. The carbon isotopic composition of shungite is light ẟ13C from −25‰ to −40‰. The age of shungite rock is more than 2 billion years old, but earlier shungite was probably much more widespread. Known shungite rocks are more than 2 billion years old, but earlier shungite was probably much more widespread. Shungite rocks could recrystallize into diamond rock upon subduction to high pressure and temperature. The diamond rocks could then be exhumed to the Earth’s surface, where they could undergo disruption and reworking with formation of those very fragments that are known as “carbonado”.

The issues of the same material with different spectra and the same spectra for different materials pose challenges in hyperspectral rock classification. This paper proposes a multidimensional feature network based on 2-D convolutional neural networks (2-D CNNs) and recurrent neural networks (RNNs) for achieving deep combined extraction and fusion of spatial information, such as the rock shape and texture, with spectral information. Experiments are conducted on a hyperspectral rock image dataset obtained by scanning 81 common igneous and metamorphic rock samples using the HySpex hyperspectral sensor imaging system to validate the effectiveness of the proposed network model. The results show that the model achieved an overall classification accuracy of 97.925% and an average classification accuracy of 97.956% on this dataset, surpassing the performances of existing models in the field of rock classification.

The article describes the results of a comprehensive study of the extra-framework components of scapolites using quantum–chemical calculations, electronic and vibrational spectroscopy, and single-crystal X-ray diffraction and crystal structure refinement. The ab initio calculations were performed using an embedded-cluster approach of extra-framework components in various cation surroundings. As a result, through comparing the experimental and ab initio calculation results, the energies of the electronic and vibrational transitions of various extra-framework components (CO3)2−, (CO3)·−, S3·−, S2·−—as well as the role of these components in the process of the lowering of the symmetry—were determined for scapolites belonging to the marialite–meionite solid–solution series. The nature of the various colors of the scapolites has also been established. Colors from purple to blue are a result of the presence of radiation-induced pairs of defects: carbonate radical anions (CO3)·− and F-centers. However, polysulfide S3·− radical anions are found in some violet scapolites.

With the increasing depletion of shallow resources, mining has gradually shifted to deeper levels, and the high-temperature problem of deep mining has restricted the efficient and safe development of mining. In this study, five types of thermal insulation materials for surrounding rocks with different ratios were produced using tailings, P.O.32.5 clinker, aluminum powder, glass beads, quick lime, and slaked lime as test materials. Based on the uniaxial compression test, the thermal constant analysis test, and numerical simulation analysis technology, the change rule of mortar compressive strength and thermal conductivity was analyzed, and the cooling effect of surrounding-rock thermal insulation materials with different ratios was discussed. The results showed that the compressive strength of the surrounding-rock thermal insulation materials ranged from 0.39 to 0.53 MPa, and the thermal conductivity ranged from 0.261 to 0.387 W/(K·m), with the compressive strength of ratio E being the largest and the thermal conductivity of ratio A being the lowest. In the numerical simulation analysis results, the thermal insulation layer thickness was taken as a value of 10 cm when, at this time, the best thermal insulation effect and economic benefits involved a temperature reduction of 0.9 K. In the case of changing the thermal conductivity and inlet wind speed, the original temperature of the rock temperature reduction was also very clear, with maximum reductions of 0.92 K, 0.92 K, and 1.42 K.

Extensional tectonics along NE-trending faults, coupled with diapirism, created paleo-highs and subsiding basins, providing the structural framework for subsequent mineralization processes. The preservation of organic matter within the Fahdene and Bahloul Cretaceous formations during the Anoxic Oceanic Events (AOE-1 and AOQ-2) facilitated the extraction of metals from seawater. The association of metals with organic matter, Fe-Mg oxides, and pyrite is revealed by principal component analysis (PCA). The subsequent maturation of organic matter generated hydrocarbons, with thermal cracking leading to the incorporation of organo-metallic ligands into mobile hydrocarbons. Oilfield brines form as a byproduct of this catagenesis. The metal-rich hydrocarbons and basinal brines invaded SO4−2-rich fluids from Triassic evaporites, resulting in the precipitation of sulfates (barite and celestite) and the bacteriogenic (BSR) and/or thermal (TSR) reduction of sulfate to reduced sulfur, which combined with metals to form sulfide ores. This study examines the role of hydrocarbons in the genesis of ore deposits within the diapiric zone, drawing upon a synthesis of literature and geological data. It highlights the interplay between basinal evolution, the organic matter-rich Cretaceous formations (Fahdene and Bahloul), diapiric paleo-highs, and the Alpine orogeny, which are identified as crucial factors in ore genesis in the diapiric zone.

A new occurrence of the Mn-Ba ore mineral, romanechite, has been discovered in a small paleo-doline of the Apulian karst on Mesozoic carbonate rock successions, characterized by reddish incrustations and nodules made essentially by Fe-bearing calcite. The conditions under which Mn-Ba ore minerals form represent an intriguing area of research, as these minerals can act as scavengers for heavy elements, impacting soils, surface sediments, and even associated aquatic systems. The genesis of romanechite is linked to the progressive interaction of silicate aqueous solutions enriched in Al, Si, and Fe with the limestone substrate. The findings provide new insights into the genetic processes responsible for the formation of reddish Mn incrustations, supporting their polygenetic origin because of the chemical alteration of limestone and allochthonous siliciclastic muds.

The Dashigou deposit is one of the most representative carbonatite-type Mo-REE deposits in the East Qinling metallogenic belt of China, with a molybdenum resource of more than 180 kt and a rare earth resource of 37.8 kt. Recent exploration has revealed a considerable scale of uranium mineralization within this deposit. Therefore, this study conducted detailed mineralogical and EPMA U-Th-Pb chemical dating on the uranium mineralization in the Dashigou deposit. The results indicate that the U-ore body in the Dashigou deposit mainly consists in carbonatite veins, and principally as anhedral, mesh-like uraninite. The mineral assemblage is characterized by uraninite + rutile + bastnasite + parisite or brannerite. The uraninite displays geochemical compositions of high Y and Ce and low Si, Ti, and Mg. The EPMA U-Th-Pb chemical dating is 144 ± 3.1 Ma, representing the Yanshanian uranium mineralization age in the region. The newly discovered uranium mineralization age indicates that the deposit experienced a uranium remobilization event during the Cretaceous and was formed in an intracontinental orogenic and extensional environment post-collision orogeny.

The East Kunlun Orogenic Belt is an essential part of the Qin-Qikun composite orogenic system, the most crucial orogenic belt in Qinghai Province, and an important gold ore-producing area in China. The Gouli gold field in its eastern section is one of the most important gold fields discovered in the belt in recent years. The Mailong mining area is an important gold mining area in the Gouli ore-concentrated area. The area has experienced frequent and intense magmatic activity, with intrusive rock bodies extensively exposed and intersected by a complex network of fault structures, providing excellent geological conditions for the formation of gold deposits. However, it is difficult to explore due to high altitude, poor transportation, and shallow coverage. This study used an audio magnetotelluric sounding method to track the deep direction and inclination of known mineral belts in the Mailong mining area, and identified mineral exploration targets, providing a basis for mineral exploration. Subsequently, a gold ore body was discovered through drilling verification, achieving a breakthrough in deep mineral exploration. The electromagnetic exploration method works well for exploring structurally altered rock-type gold deposits in plateau desert areas, and combined with the results of this electromagnetic exploration, a metallogenic geological model and genesis process of the Mailong mining area has been constructed.

Low-maturity shale oil predominates in shale oil resources. China’s onshore shale oil, particularly the Cretaceous Nenjiang Formation in the Songliao Basin, holds significant potential for low-maturity shale oil, presenting promising exploration and development prospects. This study delves into the hydrocarbon generation conditions, reservoir characteristics, and oil-bearing property analysis of the mud shale from the Nen-1 and Nen-2 sub-formations of the Nenjiang Formation to pinpoint favorable intervals for shale oil exploration. Through the integration of lithology, pressure, and fracture distribution data in the study area, favorable zones were delineated. The Nen-1 sub-formation is widely distributed in the Changling Depression, with mud shale thickness ranging from 30 to 100 m and a total organic content exceeding 2.0%. Type I kerogen predominated as the source rock, while some samples contained type II kerogen. Organic microcomponents primarily comprised algal bodies, with vitrinite reflectance (Ro) ranging from 0.5% to 0.8%. Compared to Nen-1 shale, Nen-2 shale exhibited less total organic content, kerogen type, and thermal evolution degree, albeit both are conducive to low-maturity shale oil generation. The Nen-1 and Nen-2 sub-formations predominantly consist of clay, quartz, feldspar, calcite, and pyrite minerals, with minor dolomite, siderite, and anhydrite. Hydrocarbons primarily reside in microfractures and micropores, including interlayer micropores, organic matter micropores, intra-cuticle micropores, and intercrystalline microporosity, with interlayer and intra-cuticle micropores being dominant. The free oil content (S1) in Nen-1 shale ranged from 0.01 mg/g to 5.04 mg/g (average: 1.13 mg/g), while in Nen-2 shale, it ranged from 0.01 mg/g to 3.28 mg/g (average: 0.75 mg/g). The Nen-1 and Nen-2 sub-formations are identified as potential intervals for shale oil exploration. Considering total organic content, oil saturation, vitrinite reflectance, and shale formation thickness in the study area, the favorable zone for low-maturity shale oil generation is primarily situated in the Heidimiao Sub-Depression and its vicinity. The Nen-2 shale-oil-enriched zone is concentrated in the northwest part of the Heidimiao Sub-Depression, while the Nen-1 shale-oil-enriched zone lies in the northeast part.

The formation of Paleozoic silica–iron-rich sedimentary rocks in the Urals volcanic-hosted massive sulfide (VHMS) deposits is considered a result of seafloor alteration of hyaloclastites mixed with calcareous/organic or sulfide material. These rocks host various Ti mineral phases pointing to the transformation of precursor metacolloidal TiO2 phases to disordered anatase during seafloor alteration of hyaloclastites, which was later converted to globules and clusters and further to diagenetic rutile. The LA-ICP-MS analysis showed that the Ti content of hyaloclasts partly replaced by finely dispersed Si–Fe aggregates increases to 540–2950 ppm and decreases (

The manganese deposits at the Kato Nevrokopi area are located in the Drama Basin (Northern Greece) and belong to the Rhodope Metamorphic Province. The deposits were previously exploited for several supergene Mn-oxide ore bodies of massive, battery-grade nsutite, spatially associated with fault zones in the vicinity of Oligocene granitic intrusions. We conducted detailed geological, mineralogical, and geochemical investigations at the Mavro Xylo deposit, which led to the identification of Ag-rich Mn-Zn±Pb vein-type mineralization. The studied paragenesis appears to have developed during two hydrothermal stages: stage I, characterized by the mineral assemblage rhodonite–quartz–rhodochrosite–pyrophanite–pyrite–galena–Te bearing argentite–sphalerite–wurtzite–alabandite, and stage II, dominated by Ag-rich, Mn-Zn±Pb oxides in the form of fracture-fills along a high-angle NE-SW fault zone in brecciated marbles. Bulk analyses of the stage-II oxide assemblage yielded concentrations of Ag up to 0.57 wt.%. In the veins, wurtzite is present in bands, succeeded by manganese oxides, while calcite and quartz are the main gangue minerals. We placed particular emphasis on the occurrence of Ag in high concentrations within distinct manganese oxides. Major silver carriers include Zn-bearing todorokite, chalcophanite, and hydrous Pb-Mn oxide. The vein-type mineralization at Mavro Xylo shares many characteristics with other intermediate-sulfidation epithermal precious metal-rich deposits associated with high Mn concentrations. The evolution of the mineral paragenesis indicates a change in the physicochemical attributes of the ore-forming fluids, from initially reducing (stage I) to oxidizing (stage II). Although the origin of the initial ore-forming fluid remains to be constrained, the above redox change is tentatively attributed to the increasing incursion of meteoric waters over time.

The Hongnipo deposit, a newly discovered large copper deposit in the Kangdian Fe-Cu metallogenic belt of southwest China, is hosted in the Paleoproterozoic metavolcanic and metasedimentary rocks of the Hekou group. The deposit comprises five strata-bound ore bodies and is associated with sporadically distributed gabbroic intrusions. Four stages of mineralization and alteration have been identified: sodic alteration (I), banded sulfide (II), magnetite (III), and sulfide vein/stockwork (IV). Extensive sodic alteration of stage I is confirmed by the composition of feldspars. Trace element analysis of magnetite suggests a formation temperature of 400 ± 50 °C and has a characteristic of IOCG deposits, while high δ18O values (8.3–11.0‰) of fluids from stage III indicate a magmatic water origin. Sulfide δ34SVCDT values from stages II and IV range from −2.6 to 10.9‰ and −1.5 to 9.9‰, respectively, suggesting a mixed sulfur source from magmatic H2S and reduced seawater sulfate. Chalcopyrite from Hongnipo shows a narrow δ65Cu range of −0.135 to 0.587‰, indicating formation at high temperatures. The lack of correlation between δ65Cu and δ34SVCDT values suggests distinct geochemical behaviors in mineralization. In summary, the Hongnipo deposit is classified as a Cu-rich section of a typical IOCG deposit.

With the escalating demand for advanced and eco-friendly processing technologies in mining engineering, the potential applications of microwave heating technology in the treatment of cement tailings backfill (CTB) are expanding significantly. This research comprehensively investigates the mechanisms through which microwave irradiation duration and power influence the mechanical properties of CTB with varying concentrations and cement-to-sand ratios. The aim is to reveal the influencing patterns through experimental methods, providing scientific evidence for optimizing CTB treatment processes. This paper conducted microwave heating tests, uniaxial compression tests, and SEM-EDS tests on CTB. The research results indicate that heating time and power significantly enhance the early strength of CTB, with a more pronounced effect on CTB with higher concentrations and higher cement–sand ratios. When the heating time is 7 min and the heating power is 340 W, the cement hydration reaction is maximally promoted, thereby increasing the density and strength growth rate of CTB. However, excessively long heating time or overly high heating power may cause microcracks or thermal stress concentration within the CTB, adversely affecting the strength growth rate of CTB. Optimal thermal exposure duration and microwave power settings facilitate the activation of cementitious materials and the nucleation of calcium-silicate-hydrate (C-S-H) phases, thereby accelerating the compressive strength evolution of cemented tailings backfill (CTB). The outcomes of this research offer valuable insights into the deployment of microwave heating methodologies in underground mine backfilling, which are pivotal for augmenting the economic viability and environmental sustainability of mining operations.

Mesozoic granitoid formations offer crucial insights into the tectonic history of the North China Craton. New zircon U-Pb ages of two Mesozoic granitoids in the Huai’an terrane yield ages of 226.4 ± 1.1 Ma for the Yihe (YH) granite and 156.3 ± 2.9 Ma for the Zhujiagou (ZJG) granodiorite. The negative Nb, Ta, and Ti anomalies; high Nb/Ta ratios (20.4 to 24.1); high (La/Yb)N (30–84); low initial 87Sr/86Sr ratios (0.707725–0.708188); and negative ƐNd(t) values of the Yihe complex suggest that it originated from the partial melting of the lower crust and lithospheric mantle. However, the geochemical and Sr-Nd isotopic results of the ZJG granodiorite are characterized by I-type granites: Na2O + K2O values of 7.27 to 7.94 wt%, negative Nb anomalies, positive Pb anomalies, higher initial 87Sr/86Sr ratios (0.710979–0.714841), and much lower ƐNd(t) values (−27.1 to −30.1). The Late Jurassic Zhujiagou complex was derived from partial melting of a thickened low crust, and during the Late Triassic, magmatic rocks were formed under a post-collisional extensional regime. Multiple upwellings of the asthenosphere facilitated the mixing of magmas derived from partial melting of the lithospheric mantle and lower crust. These mixed magmas then ascended to the upper crust after undergoing fractional crystallization, leading to the formation of the YH complex. In the Late Jurassic, the tectonic regime of the NCC shifted from compression to extension. The Late Jurassic intrusion identified in this study developed within a compressional setting linked to the subduction of the Paleo-Pacific Ocean.

This article focuses on zircon U-Pb isotope dating and a whole-rock elemental analysis of granodiorites, monzonitic granites, granodioritic porphyries, and alkali feldspar granites in the Yangmugang area of the Lesser Xing’an–Zhangguangcai Range. The zircon U-Pb isotope-dating results revealed that these granitic rocks formed during the late Early Jurassic period (182.9–177.2 Ma). Their geochemical characteristics and zircon saturation temperatures suggest that the granodiorites are moderately differentiated I-type granites and the monzonitic granite, granodioritic porphyries, and alkali feldspar granites are highly differentiated I-type granites. The degree of magma differentiation progressively increased from granodiorites to alkali feldspar granites. By combining the regional Nd and Hf isotope compositions, it was inferred that the magma source involved the melting of lower crustal material from the Mesoproterozoic to the Neoproterozoic eras. By integrating these findings with contemporaneous intrusive rock spatial variations, it was indicated that the late Early Jurassic granitoids in the Lesser Xing’an–Zhangguangcai Range formed within an extensional tectonic setting after the collision and closure of the Songnen–Zhangguangcai Range and Jiamusi blocks. Additionally, this study constrains the closure of the Mudanjiang Ocean to the late Early Jurassic period (177.2 Ma).

The surface and subsurface karst features of the Eocene limestone plateaus along the Middle Nile Valley in Egypt were formerly believed to be epigene in origin and to have developed during post-Eocene pluvial periods. However, the morphology of the caves and their restriction to particular stratigraphic intervals suggests that they are hypogene. The geochemistry and mineralogy of the soft, thick-bedded, brown/black cave infills shows that these sediments originated from hydrothermal processes, as evidenced by their Fe, Mn, Co, Ni, and Cu concentrations. Thus, the karst features are hypogene and probably formed during the opening of the Red Sea Rift at the end of the Oligocene and early Miocene. At this time, there was abundant volcanic activity, as shown by basalt lavas ~70 km northwest of Assiut; this triggered the release of large amounts of CO2 that made the hydrothermal waters acidic and dissolved the caves.

Developments in scanning electron microscopy (SEM) have introduced instant live coloured SEM images based on elemental composition. Here, we use a technique utilising a Unity BEX detector system, with collection speeds up to 100 times faster than typical standard energy-dispersive X-ray (EDX) analysis systems, to obtain large area backscattered and elemental composition maps of heavy mineral (HM) suites from a sample from an Oligocene fluvio-deltaic system in the Central Myanmar Basin. The fast X-ray collection rate and a high-resolution backscattered (BSE) detector allow for rapid imaging of polished blocks, thin sections, and stubs. Individual HM species can be rapidly classified, allowing for the subsequent collection of compositional and morphological metrics. In addition, the identification of grains such as zircon and apatite allow for further analysis by cathodoluminescence (CL) to identify and record the presence of growth zonation, which is critical for further U-Pb geochronology and thermochronology, using fission track analysis of apatite, zircon, and titanite. The sample used in this study contains a diverse heavy mineral suite due to the complex tectonic history of Myanmar, juxtaposing multiple metamorphic basement terranes alongside volcanic arcs and obducted ophiolites. This, along with the textural and mineralogical immaturity of the sediments themselves (governed by short transport systems and the rapid weathering of the sources), means that a wide variety of heavy mineral species can be identified and tested using this new technique, which provides a time-efficient method in comparison to traditional optical techniques. As the Unity BEX detector is located at the polepiece, it is relatively insensitive to working distance; in addition, the geometry of paired X-ray detectors on either side of the polepiece (at 180°) means that the system is also capable of fully characterising individual particles, on uncut and unpolished grain mounts, without artefacts such as particle shadowing. The development of a more comprehensive heavy mineral EDX database (library) will improve the accuracy of this new technique, as will the correlation with other techniques such as Raman spectroscopy.

The thick ore bodies in the Xianglushan tungsten mine have been irregularly mined, forming a super large, connected irregular goaf group and tall, isolated irregular pillars inside. At the same time, there is a production capacity task of recovering residual and dangerous ore bodies. This poses the potential for serious ground-pressure disasters, such as roof caving, pillar collapse, and large-scale goaf collapse during mining. Based on the actual needs of the site, we established a microseismic monitoring system. After analyzing the mining and filling processes and their relationships, and, combined with the distribution characteristics of microseismic multiple parameters, we constructed a ground-pressure disaster warning mode and mechanism. We analyzed the stability of the goaf, further formed a warning system, and achieved disaster warning. In response to the current situation of the difficulty of early warning of ground pressure in the Xianglushan tungsten mine, continuous on-site monitoring of existing goaves, point pillars, and strip pillars, as well as analysis of stress changes during dynamic mining and filling processes, we explored scientific and reasonable early warning mechanisms and models, understanding the relationship between the changes in microseismic parameters during dynamic mining and filling processes and ground pressure, studying and improving the reliability of underground microseismic monitoring and early warning, and achieved the internal connection between building early warning systems and the prevention of ground-pressure disasters. The results indicate that the mining and filling process of the ore body is the main factor in maintaining a stable and balanced distribution of underground ground pressure in mining engineering. Microseismic monitoring can invert the evolution of ground pressure and form a feedback system with ground-pressure warning, achieving mine safety management.