Search

Metal foams are newly developed engineered materials with attractive mechanical properties such as lightness, high resistance-to-weight ratio, and insulation capabilities. Lately, applications of these technologies have demonstrated the possibility of obtaining high-performance sandwich panels with steel skins and metal foam core, with potential applications across various fields. Within this framework, this work aims to assess the response of sandwich panels made of steel and aluminium foam to develop a new system of dry-assembled composite floors. The present study investigates a novel screwed steel–aluminium foam–steel (SSAFS) sandwich panel. This paper mainly describes and discusses the results of experimental tests devoted to evaluating the structural performance, mechanical properties, and suitability for practical applications of SSAFS. The fabrication process and the detailing of the steel skins and aluminium foam core assembly are also described. The results from the experimental tests revealed the potentialities of using SSAFS sandwich panels in terms of strength and stiffness, thus making them suitable for lightweight structural systems.

This manuscript explores the stiffness and strength of Square Hollow Section (SHS) tubes subjected to localised transverse actions applied to the open side of a rectangular hole created using 3D laser cutting technology (3D-LCT). Understanding the behaviour of this specific detail is crucial as it is a key component in the connections between SHS columns and passing-through IPE beams. The methodology employed in this manuscript involved developing analytical equations to predict both stiffness and strength of this structural element. The provided equations are presented in a straightforward manner and were deduced by applying elasticity principles to structural components. To validate these equations, a parametric analysis was conducted, simulating the response of 27 distinct geometric configurations of the analysed structural detail thanks to the Finite Element (FE) software. Their accuracy was confirmed by comparing the results of these simulations with the outcomes derived from the formulated equations. The primary findings indicated that the proposed equations could predict the stiffness and strength of the studied detail with an average ratio close to 1 when comparing predicted and numerical results, and a coefficient of variation of approximately 10%.

An innovative, simplified, and accurate model is proposed and developed to enable simplified yet realistic time history analysis of multi-storey buildings with moment resisting connections using friction energy dissipaters in the commonly used structural analysis and design program, SAP2000. The analyses are rapid to undertake, thereby enabling detailed study of the influence of many building system effects on the overall response. This paper presents the outcome of dynamic analysis of a complete 13-storey moment resisting steel building with Sliding Hinge Joints as the beam-column connections, considering the influential self-centring factors such as MRF and gravity columns continuity as well as column base and diaphragm flexibilities. The building is one of the Te-Puni towers, which are structural steel apartment buildings with steel-concrete composite floors, designed according to the low damage design philosophy, built in Wellington, New Zealand in 2008 and which have already been subjected to two significant earthquakes. The key objectives of the research have been to take the design of the 13-storey building and convert that into the proposed simplified model required for time history seismic analysis, to undertake analysis under scaled El-Centro earthquake record, investigate the peak inter-storey drift and the residual drift of the building, and determine the influence of column base rotational stiffness, floor slab out of horizontal plane displacement, type of friction damper, and MRF and gravity column continuity. It is concluded that the response of the building is stable and predictable, as expected, and that the post-earthquake state of the building, particularly from the self-centring point of view, is well within the limits for maintaining operational continuity following an ULS level design earthquake.