Search

Healthcare facility staff use a wide variety of cleaning and disinfecting products during their daily operations, many of which are associated with respiratory or skin irritation or sensitization with repeated exposure. The objective of this study was to characterize the prevalence of cleaning and disinfection product use, glove use during cleaning and disinfection, and skin/allergy symptoms by occupation and identify the factors influencing glove use among the healthcare facility staff. A questionnaire was administered to the current employees at a midwestern Veterans Affairs healthcare facility that elicited information on cleaning and disinfection product use, glove use during cleaning and disinfection, skin/allergy symptoms, and other demographic characteristics, which were summarized by occupation. The central supply/environmental service workers (2% of the total survey population), nurses (26%,), nurse assistants (3%), and laboratory technicians (5%) had the highest prevalence of using cleaning or disinfecting products, specifically quaternary ammonium compounds, bleach, and alcohol. Glove use while using products was common in both patient care and non-patient care occupations. The factors associated with glove use included using bleach or quaternary ammonium compounds and using cleaning products 2–3 or 4–5 days per week. A high frequency of glove use (≥75%) was reported by workers in most occupations when using quaternary ammonium compounds or bleach. The use of alcohol, bleach, and quaternary ammonium compounds was associated with skin disorders (p < 0.05). These research findings indicate that although the workers from most occupations report a high frequency of glove use when using cleaning and disinfection products, there is room for improvement, especially among administrative, maintenance, and nursing workers. These groups may represent populations which could benefit from the implementation of workplace interventions and further training regarding the use of personal protective equipment and the potential health hazards of exposure to cleaning and disinfecting chemicals.

Vat photopolymerization (VP), a type of additive manufacturing process that cures resin to build objects, can emit potentially hazardous particles and gases. We evaluated two VP technologies, stereolithography (SLA) and digital light processing (DLP), in three separate environmental chambers to understand task-based impacts on indoor air quality. Airborne particles, total volatile organic compounds (TVOCs), and/or specific volatile organic compounds (VOCs) were monitored during each task to evaluate their exposure potential. Regardless of duration, all tasks released particles and organic gases, though concentrations varied between SLA and DLP processes and among tasks. Maximum particle concentrations reached 1200 #/cm3 and some aerosols contained potentially hazardous elements such as barium, chromium, and manganese. TVOC concentrations were highest for the isopropyl alcohol (IPA) rinsing, soaking, and drying post-processing tasks (up to 36.8 mg/m3), lowest for the resin pouring pre-printing, printing, and resin recovery post-printing tasks (up to 0.1 mg/m3), and intermediate for the curing post-processing task (up to 3 mg/m3). Individual VOCs included, among others, the potential occupational carcinogen acetaldehyde and the immune sensitizer 2-hydroxypropyl methacrylate (pouring, printing, recovery, and curing tasks). Careful consideration of all tasks is important for the development of strategies to minimize indoor air pollution and exposure potential from VP processes.

The potential benefits of biochar, a carbon-rich substance derived from biomass, for enhancing agricultural yield and soil health have drawn increasing interest. Nevertheless, owing to the lack of specialized studies, the role of its poly-spatial structure in the success of fostering plant growth remains unclear. This study aimed to assess the effects of various biochar pore shapes on tobacco growth and the underlying microbiological processes. Three pyrolysis temperatures (250 °C, 400 °C, and 550 °C) were used to produce biochar from tobacco stems, resulting in different pore structures (T3 > T2 > T1). We then used BET-specific surface area (BET), t.Plot micropore specific surface area (t.Plot), mesopore specific surface area (MSSA), specific pore volume (SPV), average pore size (AP), and mesopore pore volume (MPV) measurements to evaluate the effects of these biochars on tobacco growth and biomass accumulation, and microbial analyses were performed to investigate the underlying mechanisms. When applied to plants, biochar increased their growth compared to untreated controls. The most notable improvement in tobacco growth was observed in the biochar produced at 400 °C (T3), which possessed the largest and most advantageous pore structure among all treatments. Further studies demonstrated that biochars with greater specific surface areas (BET, t.Plot, and MSSA) positively altered the abundance of key microbial taxa (e.g., Stenotrophobacter, Ensifer, Claroideoglomus) and community composition, thereby encouraging plant development and biomass accumulation. Conversely, greater pore volumes (SPV, AP, and MPV) inhibited microbial activity and significantly affected growth and biomass accumulation. Structural equation modeling further demonstrated that the pore structure of biochar greatly affected plant growth by changing the relative abundance and community composition of soil microbes. Maximizing the benefits of biochar in stimulating plant growth and improving soil microbial communities depends on optimizing the material’s pore structure, particularly by increasing the specific surface area. These findings will help expand the use of biochar in sustainable agriculture.

Existing machine learning (ML) models often encounter challenges in accurately predicting the shear strength of steel fiber reinforced concrete (SFRC) beams, mainly due to a lack of generalization. This study introduces an advanced stacked ensemble ML architecture to overcome this limitation by utilizing a comprehensive data set of 394 experimental observations and a 20-feature matrix. The model exhibits exceptional performance with a mean absolute error of 0.391 and a correlation coefficient (R2) of 93.7%, and surpasses traditional ML algorithms. Furthermore, a sensitivity analysis of the developed model yields that shear strength is highly responsive to the shear span-to-effective depth ratio, with an increase from 1 to 4 resulting in a significant reduction (about 50%) in strength. Increasing the percentage of longitudinal steel from 1 to 2% leads to a 14.6% gain, whereas doubling its yield strength has a more modest 3.7% effect. Increasing the compressive strength of concrete from 25 to 50 MPa, notably increases the shear strength by 19.6%. Fiber length, diameter, and aspect ratio exhibit varying impacts, with shear strength most influenced by the fiber volume fraction, which leads to a peak enhancement of 30.7% at 2% fibrous volume; however, the tensile strength of fibers minimally affects the shear strength. Additionally, this research presents a simplified empirical model to predict the shear strength of SFRC beams based on the key determinants. This model employs the iterative Gauss–Newton algorithm, demonstrates reasonable predictive capability, and boasts an R2 of 83.3% and mean prediction-tested strengths of around 1.039. The practical implications of these findings are substantial for the construction industry as they enable a more accurate and reliable design of SFRC beams, optimize material usage, and potentially reduce construction costs as well as enhance structural safety.

Delayed hypersensitivity reactions (DHRs) have been reported in association with COVID-19 vaccines, particularly those that are mRNA-based. Classic DHRs result in induration, erythema, tenderness, and urticaria. However, soft tissue mass is an uncommon complication of a COVID-19 vaccination-associated DHR and is rarely reported in the literature. We present a case of a 49-year-old male who recognized a mildly painful, firm soft tissue mass within the biceps mimicking neoplasm six months after receiving the booster dose of the Moderna vaccine. Non-operative conservative treatment modalities, including heating pads, ice packs, acetaminophen, and ibuprofen, failed to improve the patient’s mass. The mass, which proved histologically to be an inflammatory pseudo-tumor, did not recur after complete excision. While there have been many reported cases of DHRs following COVID-19 vaccinations, we present this case to raise awareness of the development of pseudo-tumors as a possible, yet rare, clinical manifestation of DHRs following vaccination.

A novel ligand, namely, (N’,N’’’-((1E,2E)-1,2-diphenylethane-1,2-diylidene)bis(3-allyl-2-hydroxybenzohydrazide) (H2DBAZ), was designed and synthesized. This ligand demonstrated the ability to successfully interact with Tb(III) ions, resulting in the formation of a chemosensor that exhibited luminescent properties. The novel ligand was produced and subsequently subjected to characterization with several analytical techniques, including mass spectroscopy, elemental analysis, Fourier-transform infrared spectroscopy (FTIR), and proton nuclear magnetic resonance spectroscopy (1H NMR). The postulated chemical structure of the Tb(III)–(DBAZ) complex was assessed utilizing a molar ratio approach. The chemosensor exhibited both selectivity and sensitivity towards malathion when compared to other nine organophosphorus pesticides that were investigated in methanol. The method was based on the phenomenon of luminescence static quenching shown by the complex subsequent to its interaction with the malathion pesticide. A linear Stern–Volmer plot was seen and, subsequently, utilized to generate the calibration curve. The observed linear range spanned from 0.39 to 60 µM, with a strong correlation coefficient of 0.999. Additionally, the limit of detection (LOD) was determined to be 0.118 µM. This methodology was successfully employed to measure the presence of malathion in various water samples. This particular complex exhibited promising potential for application in the development of a chemosensor utilizing the molecularly imprinted polymer approach.

The effect of macro synthetic polyolefin fibers on the bond strength of tension lap splices in reinforced concrete (RC) beams is investigated in this study. The bond between the reinforcement and concrete plays a vital role in the strength of RC beams. The presence of polyolefin fibers in the lap splice zone confines the concrete and enhances the bond strength of the steel bars. The use of synthetic fibers is preferable to steel ones since steel suffers from corrosion over time. Tests were conducted on 12 full-scale beam specimens to determine the effect of fiber volume fraction (Vf), bar diameter (db) and concrete cover-to-bar diameter (c/db) on the response. Four volume fractions (Vf = 0, 0.5, 1 and 1.5%) of polyolefin fibers and three bar sizes (db = 16, 20 and 25 mm) with the corresponding (c/db = 2.31, 1.75 and 1.30) were considered to evaluate the bond strength. The test results demonstrated that the polyolefin fibers noticeably enhanced the bond strength and ductility of spliced tension bars. Experimental results were compared with those obtained from two theoretical methods including ACI Committee 318 design provisions. The results showed that the equation proposed by the ACI Committee overestimates the bond strength.

The long-term immunoglobulin responses of COVID-19 vaccinations is important to determine the efficacy of these vaccinations. This study aimed to investigate and compare the long-term immunoglobulin response of COVID-19 vaccination recipients, using anti-S IgG, anti-N IgG, and IgM titer levels. This study included 267 participants, comprising individuals who tested positive for COVID-19 through PCR testing (n = 125), and those who received the Pfizer (n = 133), Sinopharm (n = 112), AstraZeneca (n = 20), or Sputnik (n = 2) vaccines. Female participants comprised the largest share of this study (n = 147, 55.1%). This study found that most participants had positive IgG antibodies, with 96.3% having anti-S IgG and 75.7% having anti-N IgG. Most participants (90.3%) tested negative for anti-N IgM antibodies. Sinopharm-vaccinated individuals exhibited a notably lower rate of positive anti-S IgG (93.8%) and a significantly higher rate of positive anti-N IgG antibodies (91%). Anti-N IgG levels were significantly correlated with the number of prior COVID-19 infections (p = 0.015). Specifically, individuals with a history of four COVID-19 infections had higher anti-N IgG titers (14.1 ± 1.4) than those with only one experience of COVID-19 infection (9.4 ± 7.2). Individuals who were infected with COVID-19 after receiving the vaccine demonstrated higher levels of anti-N IgG, exhibiting a 25% increase in mean titer levels compared to those who were infected prior to vaccination. There was a statistically significant association between anti-N IgG positivity with age (p = 0.034), and smoking status (p = 0.006) of participants. Participants younger than 20 and older than 60 showed the highest positivity rate of anti-N (>90%). Smokers had a low positivity rate of anti-N (68.8%) compared to nonsmokers (83.6%). In conclusion, this study demonstrated that most COVID-19 vaccination recipients had positive IgG antibodies, with differences in the long-term immunoglobulin response depending on the type of vaccine administered and occurrence of COVID-19 infection.

The complex [Ni3L6]•1.56CH2Cl2 (HL = (E)-2-(((3,4-dimethylphenyl)imino)methyl)phenol) was isolated in the monoclinic C 2/c space group. All nickel atoms are six-coordinate with a nickel atom bound to only O-phenol atoms, while the two terminal cations are surrounded by N3O3 atoms. This complex and its ligand (20 mg/mL in DMSO) were tested as antimicrobials. Against two fungi, the complex and amphotericin B caused 13 and 21 mm inhibition diameters, respectively, in Candida albicans plates. Against four bacteria, the ligand inhibited only Staphylococcus aureus with a 10 mm diameter, and the complex induced inhibitions with 10–13 mm (ampicillin afforded 21–26 mm inhibitions). Against cancer (MCF-7) and normal (BHK) cells, the ligand provided virtual inactivity, but great activities (IC50 = 5.44 and 11.61 μM, respectively) were shown by the complex. Doxorubicin afforded activities with IC50 = 9.66 and 36.42 μM in these cells, respectively. The ligand and its complex offered 100% germination of a drought-sensitive wheat cultivar (90% for control), but, under drought, the complex, ligand and control gave germination with 85, 75 and 95%, respectively. Under normal irrigation and drought, the control and complex afforded 100% germination, and the ligand afforded 95% germination for a drought-resistive wheat cultivar.

Surface coating has become an effective approach to improve the electrochemical performance of Ni-rich cathode materials. In this study, we investigated the nature of an Ag coating layer and its effect on electrochemical properties of the LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode material, which was synthesized using 3 mol.% of silver nanoparticles by a facile, cost-effective, scalable and convenient method. We conducted structural analyses using X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy, which revealed that the Ag nanoparticle coating did not affect the layered structure of NCM811. The Ag-coated sample had less cation mixing compared to the pristine NMC811, which could be attributed to the surface protection of Ag coating from air contamination. The Ag-coated NCM811 exhibited better kinetics than the pristine one, which is attributed to the higher electronic conductivity and better layered structure provided by the Ag nanoparticle coating. The Ag-coated NCM811 delivered a discharge capacity of 185 mAh·g−1 at the first cycle and 120 mAh·g−1 at the 100th cycle, respectively, which is better than the pristine NMC811.

The growth and quality of medicinal plants are greatly affected by environmental stress, with over half of the world’s agricultural land facing water shortages. This research was conducted over two seasons in 2018 and 2019 and aimed to investigate the influence of varying irrigation intervals and partial replacement of mineral fertilizers with biofertilizer (yeast) on the growth, yield, and essential oil content of lemongrass. The study also looked at the effect of the partial substitution of NPK fertilizer with yeast on lemongrass’s ability to withstand water deficit stress. The results showed that water deficit and reducing NPK levels led to a decline in growth characteristics and relative leaf greenness, which was accompanied by an increase in proline content and essential oil percentage. These findings suggest that lemongrass is sensitive to drought and requires adequate nitrogen fertilization. However, extending the irrigation intervals led to an improvement in essential oil content. To achieve high essential oil yield and maintain productivity while considering environmental factors, it is recommended to reduce mineral fertilizer to 50–75% NPK combined with biofertilizer, and space irrigation intervals every 10–15 days. Further research is needed to improve the growth of lemongrass in water-deficient conditions, particularly on newly reclaimed soils.

The ongoing coronavirus disease 2019 (COVID-19) pandemic may result in cardiovascular complications such as myocarditis, while encephalitis is a potentially life-threatening COVID-19-associated central nervous system complication. This case illustrates the possibility of developing severe multisystem symptoms from a COVID-19 infection, despite having received the COVID-19 vaccine within the year. Delay in treatment for myocarditis and encephalopathy can lead to permanent and possibly fatal damage. Our patient, a middle-aged female with a complicated medical history, initially came in without characteristic manifestations of myocarditis such as shortness of breath, chest pain, or arrhythmia, but with an altered mental status. Through further laboratory tests, the patient was diagnosed with myocarditis and encephalopathy, which were resolved within weeks through medical management and physical/occupational therapy. This case presentation describes the first reported case of concomitant COVID-19 myocarditis and encephalitis after receiving a booster dose within the year.

This work aims to determine the impact of dietary supplementation of polysaccharide, extracted from brown seaweeds Sargassum dentifolium on growth indices, feed utilization, biochemical compositions, microbial abundance, expressions of growth and immunity-related genes, and stress genes of the Pacific Whiteleg shrimp Litopenaeus vannamei. A total of 360 post-larvae of L. vannamei were randomly distributed into a 12-glass aquarium (40 L of each) at a stocking density of 30 shrimp with an initial weight of (0.0017 ± 0.001 g). During the 90-day experiment trial, all shrimp larvae were fed their respective diets at 10% of total body weight, three times a day. Three experimental diets were prepared with different seaweed polysaccharide (SWP) levels. The basal control diet had no polysaccharide level (SWP0), while SWP1, SWP2, and SWP3 contained polysaccharides at concentrations of 1, 2, and 3 g kg−1 diet, respectively. Diets supplemented with polysaccharide levels showed significant improvements in weight gain and survival rate, compared to the control diet. Whole-body biochemical composition and the microbial abundance (the total count of heterotrophic bacteria and Vibrio spp.) of L. vannamei showed significant differences among polysaccharide-treated diets compared to the control. At the end of the feeding experiment, the dietary supplementation of polysaccharide levels enhanced the expression of growth-related genes (Insulin-like growth factors (IGF-I, IGF-II), immune-related genes (β -Glucan-binding protein (β-Bgp), Prophenoloxidase (ProPO), Lysozyme (Lys), and Crustin), and stress genes (Superoxide dismutase (SOD) and Glutathione peroxidase (GPx) in the muscle tissue of L. vannamei. However, the current study concluded that the inclusion rate of 2 g kg–1 of polysaccharide as a dietary additive administration enhanced both weight gain and survival rate of L. vannamei, while the incorporation level of 3 g kg–1 reduces the abundance of pathogenic microbes and enhances the growth-, immunity- and stress-related gene expressions of L. vannamei.

Anaerobic digestion (AD) involves the breakdown of a substrate by mixed microbial communities in the absence of free oxygen. This process has many benefits leading to the production of bioenergy (biogas) and fertilizers (bio-fertilizers). Unfortunately, the bio-fertilizer made using AD may be contaminated with weed seeds and may have the potential of infesting the fields to which it is applied. Thus, the goal of this study is to determine the effects of AD on seed germination and viability of two undesirable crop plants (Triticum aestivum and Sorghum bicolor) and four weed species of reclaimed agricultural land near Qena, Egypt (Schouwia purpurea, Polygonum equisetiforme, Amaranthus viridis, and Lotus arabicus). Vegetative biomass of T. aestivum was used as the substrate, and cattle rumen fluid was used as the inoculum. The seeds of the six plants were placed in culture bottles and subjected to AD at 37 ± 2 °C for up to 16 days. Time to first germination (the time required for the first seed to germinate) and the percentage of seeds that germinated varied among the six species. The percentage germination of all six species decreased with increasing duration of AD, with no seeds germinating at 12 or 16 days of incubation. Seeds of T. aestivum and S. bicolor experienced a rapid and significant decrease in the percentage of viable seeds and an increase in the percentage of non-viable seeds. In contrast, even though they did not germinate, some seeds of the other four weed species remained viable, even after 16 days of incubation. Approximately 32% of S. purpurea seeds remained viable at 16 days of incubation. Overall, our results suggested that the application of anaerobic digestate in the reclaimed agricultural lands near Qena, Egypt, is not likely to exacerbate weed infestations in these fields.

Dietary cholesterol accelerates oxidative and pro-inflammatory processes, causing hypercholesterolemia and cardiovascular diseases. Thus, the purpose of the current study is to compare the protective effects of thymoquinone (TQ) alone or in combination with losartan (LT) against the heart damage caused by a high-cholesterol diet (HCD). HCD-fed rat groups revealed an elevated activity of indicators of cardiac enzymes in the serum. Serum and cardiac lipids were also found to be significantly higher in HCD-fed rat groups. Cardiac pro-inflammatory and oxidative markers were also increased in HCD-fed rat groups, whereas antioxidant indicators were decreased. However, all of these biochemical, inflammatory, antioxidant, and oxidative change indicators returned to levels similar to those of normal rats after treatment with TQ alone or in combination with LT administered to HCD-fed rat groups. Hypercholesterolemia considerably induced the lipid peroxidation product, thiobarbituric acid reaction substances (TBARs), and oxidative radicals in cardiac cells, which were attenuated by QT and LT treatments, particularly when combined. Finally, QT, LT, and their combination were able to reduce the histological changes changes brought on by cholesterol excess in cardiac tissues. In conclusion, administration of TQ in a combination with LT which has a better protective effect, significantly reduced the hypercholesterolemic-induced oxidative and inflammatory changes that occurred in cardiac tissue.

A novel derivative of ibuprofen and salicylaldehyde N′-(4-hydroxybenzylidene)-2-(4-isobutylphenyl) propane hydrazide (HL) was synthesized, followed by its complexation with Cu, Ni, Co, Gd, and Sm. The compounds obtained were characterized by 1HNMR, mass spectrometry, UV-Vis spectroscopy, FT-IR spectroscopy, thermal analysis (DTA and TGA), conductivity measurements, and magnetic susceptibility measurements. The results indicate that the complexes formed were [Cu(L)(H2O)]Cl·2H2O, [Ni(L)2], [Co(L)2]·H2O, [Gd(L)2(H2O)2](NO3)·2H2O and [Sm(L)2(H2O)2](NO3)·2H2O. The surface characteristics of the produced compounds were evaluated by DFT calculations using the MOE environment. The docking was performed against the COX2 targeting protein (PDB code: 5IKT Homo sapiens). The binding energies were −7.52, −9.41, −9.51, −8.09, −10.04, and −8.05 kcal/mol for HL and the Co, Ni, Cu, Sm, and Gd complexes, respectively, which suggests the enhancement of anti-inflammatory behaviors compared with the binding energy of ibuprofen (−5.38 kcal/mol). The anti-inflammatory properties of the new compounds were assessed in vitro using the western blot analysis method and the enzyme-linked immunosorbent assay (ELISA), consistent with the outcomes obtained from docking. The half-maximal inhibitory concentration (IC50) values are 4.9, 1.7, 3.7, 5.6, 2.9, and 2.3 µM for HL and the Co, Ni, Cu, Sm, and Gd complexes, respectively, showing that they are more effective inhibitors of COX2 than ibuprofen (IC50 = 31.4 µM). The brain or intestinal estimated permeation method (BOILED-Egg) showed that HL and its Co complex have high gastrointestinal absorption, while only the free ligand has high brain penetration. The binding constants of Co, Cu, and Gd complexes with DNA were recorded as 2.20 × 104, 2.27 × 106, and 4.46 × 103 M−1, respectively, indicating the intercalator behavior of interaction. The newly synthesized ibuprofen derivative and its metal complexes showed greater anti-inflammatory activity than ibuprofen.

Two antimony complexes {[Sb(L1)Cl2] C1 and [Sb(L2)Cl2] C2} with the thiosemicarbazone ligands {HL1 = 4-(2,4-dimethylphenyl)-1-((pyridin-2-yl)methylene)thiosemicarbazide and HL2 = 4-(2,5-dimethoxyphenyl)-1-((pyridin-2-yl)methylene)thiosemicarbazide} were introduced. The structures were elucidated on the basis of a CHNS analysis, spectroscopic techniques (UV-Vis and FT-IR), and DMF solution electrical conductivities. Single crystal X-ray diffraction analysis of complex C1 assigned the complex pseudo-octahedral geometry and triclinic P-1 space group. Only the ligand HL1 and its derived complex C1 displayed antifungal activities against Candida albicans and this activity was enhanced from 10 mm to 21 mm for the respective complex, which is the same activity given by the drug “Amphotericin B”. The ligands HL1 and HL2 gave inhibitions, respectively, of 14 and 10 mm against Staphylococcus aureus and 15 and 10 mm against Escherichia coli; however, complexes C1 and C2 increased these inhibitions to 36 and 32 mm against Staphylococcus aureus and 35 and 31 mm against Escherichia coli exceeding the activities given by the ampicillin standard (i.e., 21 mm against Staphylococcus aureus and 25 mm against Escherichia coli). Against MCF-7 human breast cancer cells, the IC50 values of HL1 (68.9 μM) and HL2 (145.4 μM) were notably enhanced to the values of 34.7 and 37.4 μM for both complexes, respectively. Further, the complexes induced less toxicity in normal BHK cells (HL1 (126.6 μM), HL2 (110.6 μM), C1 (>210.1 μM), and C2 (160.6 μM)). As a comparison, doxorubicin gave an IC50 value of 9.66 μM against MCF-7 cells and 36.42 μM against BHK cells.

The present study evaluated the influence of different commercial agricultural by-products as a carbon source in a bifloc-based (BFT) culture system on growth performance, whole-body proximate composition, digestive enzyme activities, gut microbial abundance, and hepatopancreas histology of Pacific whiteleg shrimp, Litopenaeus vannamei post larvae (Pls). Three groups were designed, the first group was the control group, where the shrimp was reared in clear water (without carbon source addition and water exchange rate of 100% two times a week) and fed with a commercial diet, in the second and third groups shrimp were reared in BFT systems using two different carbon sources, sugarcane bagasse (SB) and rice bran (RB) without additional feeding or water exchange. The initial stocking density was 16 Pls/liter with an average individual shrimp weight of 0.01 ± 0.002 g and age (PL20). The experiment lasted 90 days. The water quality parameters were maintained at optimum levels during the experiment. The final body weight and specific growth rate of shrimp were significantly (p ≤ 0.01) higher in the control group than those reared in both SB and RB-based BFT. Meanwhile, the survival rate was significantly (p < 0.05) higher in BFT groups than in the control. The protease activity in shrimp stomach did not differ significantly. Meanwhile, protease, lipase, and amylase in the intestine showed a significant increase (p < 0.01) in BFT groups than those obtained in the control group. The total heterotrophic bacteria were significantly (p < 0.05) higher in BFT groups. Furthermore, the hepatopancreas histological status of shrimp reared in the SB-based BFT group showed an increase in the hepatopancreas tubules in the distal and B-cell zones (blister-like cells) by 16.83 and 34.89%, respectively, compared to the control. This study revealed that BFT could be used as a natural feed without artificial diets, which influenced the gut microbiota of shrimp, increased digestive enzyme activities, as well as improved the histological structure of the hepatopancreas of shrimp. However, the success of this conditions under high stocking density still needs more investigation.

New complexes of trivalent cobalt with substituted thiosemicarbazone ligands having an NNS donor system {HL1 = 4-(4-nitrophenyl)-1-((pyridin-2-yl)methylene)thiosemicarbazide and HL2 = 4-(2,5-dimethoxyphenyl)-1-((pyridin-2-yl)methylene)thiosemicarbazide} were synthesized via the in situ oxidation of divalent cobalt chloride accompanying its addition to the ligands. The complexes C1 and C2 were characterized via elemental (CHNS) analysis and 1H NMR, FT-IR and UV-Vis. spectroscopic data. Further, conductometric studies on the DMF solutions of the complexes indicated their 1:1 nature, and their diamagnetism revealed the low-spin trivalent oxidation state of the cobalt in the complexes. The X-ray diffraction analysis of complex C1 indicated that it crystallizes in the triclinic space group P-1. The metal exhibits an octahedral environment built by two anionic ligands bound via pyridine nitrogen, imine nitrogen and thiol sulfur atoms. The complex is counterbalanced by a chloride ion. In addition, two lattice water molecules were detected in the asymmetric unit of the unit cell. The ligand HL2 (20 mg/mL in DMSO) displayed inhibition zones of 10 mm against both S. aureus and E. coli, and the same concentration of the respective complex raised this activity to 15 and 12 mm against these bacterial strains, respectively. As a comparison, ampicillin inhibited these bacterial strains by 21 and 25 mm, respectively. Screening assay by HL1 on four human cancer cells revealed the most enhanced activity against the breast MCF-7 cells. The induced growth inhibitions in the MCF-7 cells by all compounds (0–100 μg/mL) have been detected. The ligands {HL1 and HL2} and complex C2 gave inhibitions with IC50 values of 52.4, 145.4 and 49.9 μM, respectively. These results are more meaningful in comparison with similar cobalt complexes, but less efficient compared with the inhibition with IC50 of 9.66 μM afforded by doxorubicin. In addition, doxorubicin, HL1 and HL2 induced cytotoxicity towards healthy BHK cells with IC50 values of 36.42, 54.8 and 110.6 μM, but surviving fractions of 66.1% and 62.7% of these cells were detected corresponding to a concentration of 100 μg/mL of the complexes (136.8 μM of C1 and 131.4 μM of C2).

The development of new, safe, and effective methods of managing fungal pathogens is required. This study was conducted to perform an initial in vitro assessment of the antifungal activity of water-based plant extracts from three plants which are invasive in Egypt: Prosopis juliflora, Ipomoea carnea, and Leucaena leucocephala. These extracts were tested against three pathogenic fungi species that cause high crop losses in Egypt: Fusarium solani, Alternaria solani, and Colletotrichum circinans. Three extract concentrations, 10%, 20%, and 30%, were tested using a completely randomized design, with three replicates per treatment. Antifungal activity was determined based on the effects of plant extracts on fungal radial growth inhibition, average daily growth of fungi, spore formation, spore germination, and total biomass. Inhibition of the growth of fungal strains increased with increasing plant extract concentration, with the highest inhibitory rate at the 30% extract concentration. In addition, spore density, spore germination, and total biomass decreased significantly with increasing extract concentration. The three fungal pathogens differed in their inhibition and their response to these plant extracts. Prosopis juliflora had the highest inhibitory effect on the three fungal pathogens, compared to the extracts from the other two invasive plants. The results of this feasibility study indicate that P. juliflora extracts have high antifungal activity and follow-up in vivo assays should be conducted to determine their efficacy in the safe and sustainable management of these and other fungal pathogens.

With an increasing demand for industrial dyes in our daily lives, water conditions have become worse. Recently, the removal of such environmentally hazardous pollutants from wastewaters through photocatalytic degradation has been drawing increased attention. Three mesoporous nanophases of BiFeVOx.y as (Bi2FeIIIV1−yO5.5−y) visible light photocatalysts were synthesized in this study using ethylene glycol-citrate sol-gel synthesis combined with microwave- assisted calcination. X-ray diffraction (XRD), differential thermal analysis (DTA), FTIR spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy coupled with energy dispersive X-ray spectrometry (SEM-EDS), nitrogen adsorption-desorption isotherms, and UV-Vis diffuse reflectance spectrophotometry (UV-Vis/DRS) were used to characterize the BiFeVOx.y photocatalysts. The visible light-induced photocatalytic activities of the BiFeVOx.y phases were evaluated by the degradation of methylene blue (MB) dye in aqueous solution at pH ~10.0. The results of this study show that the combination of doping strategy with the utilization of advanced synthesis methods plays an important role in improving the structure and surface properties of BiFeVOx.y phases, and thereby enhancing their adsorption and photocatalytic efficiencies. The synthesized mesoporous tetragonal γ-BiFeVOx.y nanophase has been proven to be a potential visible-light photocatalyst for the degradation of organic dyes.

This paper presents the influence of polyolefin fiber on the flexural and shear attitude on the flat slabs. Three slab sets (80 cm × 80 cm) were tested, each with a thickness of 10 cm. In the first set (S1), the effect of fiber content on the flexural behavior of the flat slab was considered. Therefore, four slab specimens were cast, one of which was considered as a control specimen with no fiber content, while the other three included fibers at 0.5, 1, and 1.5 percent of the total concrete volume. The second series of experiments studied the flexural behavior of flat slabs (S2) with an opening of 15 cm × 15 cm. The first specimen contained nil polyolefin, while the second included 1% polyolefin. In the third set (S3), consideration was taken for 0 and 1% of Polyolefin to realize the shear behavior of the flat slab. The increase in polyolefin fiber content from 0 to 1.5% (for slab set 1) will decrease the deflection from 4.5 mm to 2.3 mm, with an average of 3.58 mm, which is close to the deflection of a 1% polyolefin fiber specimen. Three dimensional models for the tested slabs were simulated numerically via ABAQUS software program. The ratio of the maximum deflection between the experimental and the numerical outcomes were varied with a range of 1.01 to 1.28, with an average of 1.14.

Combining fiber with concrete mixes has become essential and its widespread use improves the strength of structural concrete elements. This research conducted an experiment into the structural performance of flat slabs with and without a square opening using four types of fiber (hooked-end, straight, corrugated steel fiber and polyolefin fiber) to gain a better understanding of how the variance of fiber type and shape effects the flexural behaviors of two-way slabs. The test program involved (a) testing the properties of hardened concrete, such as compressive properties, modulus of rupture and splitting tensile strength, and (b) testing the flexural behavior of two-way slabs. Ten slabs were divided into five pairs, including two specimens used as reference specimens (with and without openings), and eight other specimens with different types of fibers. Results revealed that the existing fiber in concrete improved the mechanical properties of hardened concrete mix, and the compressive strength test showed higher improvement in specimens with hooked and straight steel fiber. The flexural behavior of reinforced concrete slab was significantly enhanced, and the flexural strength capacity was especially improved for the slabs strengthened with hooked-end and corrugated steel fiber. Polyolefin fiber showed a slight enhancement of mechanical properties and good improvement in flexural capacity. Generally, the highest increments in compressive strength and modulus of rupture were 24.8%, 20% and 11%, and the ultimate load-carrying capacity of slabs was 39%, 13% and 19% for specimens with steel hooked, steel corrugated and polyolefin fibers, respectively, compared with control specimens.

This paper reports on the manufacture of ZnO nanoparticles (ZnO NPs) from Prosopis juliflora leaf extracts. Various methods of characterization were used, including X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), and transmission electron microscope TEM. ZnO NPs has a hexagonal wurtzite structure with a preferred orientation of 101 planes, according to XRD. The functional groups found in ZnO NPs isolated from leaves are responsible for the FT-IR peaks that correspond to them. The morphology of the produced nanoparticles is a sphere-like form, as shown in the SEM pictures. TEM examination revealed ZnO NPs with a size of 50–55 nm. These ZnO NPs were used to remediate pollutants in paper mill effluents, and they were able to remove 86% of the organic pollutants from the sample at 0.05 mg/L dose and reduce 89% of the organic pollutants during a 5-h reflex time. Meanwhile, for the photocatalysis of paper mill effluents, it has been noted that COD was removed by 74.30%, 63.23%, and 57.96% for the first, second, and third cycles, respectively.

This study was carried out in order to study the flexural behavior of fiber-reinforced ultra-high-performance concrete (UHPC) containing hybrid microsteel straight fibers and natural fine aggregates under four-point flexural loading. The experimental results revealed that the fiber pullout mechanism had a progressive pullout (collapse) mode. A highly flexural crack developed when the fiber pulling mechanism was explicitly triggered, leading to the failure of most beams. The maximum load in beams reinforced by 1.2, 1.6, and 2.0% exceeded that in beams without longitudinal reinforcement by 56, 73, and 94%, respectively. Further, bar reinforcements at 125, 115, 95, 85, and 75 mm depths led to increases of 56, 55, 73, 96, and 94% in beam load capacity, respectively. In addition, bar reinforcement at 115, 95, 85, and 75 mm depths reduced the beams’ ductility by 40, 23, 35, and 39% compared to those with 125 mm depth. All studied UHPC beams had an uncracked phase that extended to a curvature of about 7.5 × 10−6 rad, which occurred at about 10 kNm. The use of the design of experiments was exploited in this investigation to develop a prediction model for the ultimate moment capacity of UHPC beams. This prediction model took into account the sectional and material properties of UHPC beams. To carry out this analysis, a database of 25 beams, developed by other investigators, as well as the present authors, was utilized. With a mean prediction-to-test ratio of 0.92, this prediction model had a reasonable performance capacity. In turn, this model was used to generate isoresponsive surface contours that could be used for UHPC beam design.

In the present work, the structural responses of 12 UHPC beams to four-point loading conditions were experimentally and analytically studied. The inclusion of a fibrous system in the UHPC material increased its compressive and flexural strengths by 31.5% and 237.8%, respectively. Improved safety could be obtained by optimizing the tensile reinforcement ratio (ρ) for a UHPC beam. The slope of the moment–curvature before and after steel yielding was almost typical for all beams due to the inclusion of a hybrid fibrous system in the UHPC. Moreover, we concluded that as ρ increases, the deflection ductility exponentially increases. The cracking response of the UHPC beams demonstrated that increasing ρ notably decreases the crack opening width of the UHPC beams at the same service loading. The cracking pattern the beams showed that increasing the bar reinforcement percentages notably enhanced their initial stiffness and deformability. Moreover, the flexural cracks were the main cause of failure for all beams; however, flexure shear cracks were observed in moderately reinforced beams. The prediction efficiency of the proposed analytical model was established by performing a comparative study on the experimental and analytical ultimate moment capacity of the UHPC beams. For all beams, the percentage of the mean calculated moment capacity to the experimentally observed capacity approached 100%.