Search

The paper addresses environmental protection by valorizing an important agri-food waste category, namely fruit and vegetables with focusing on the main characteristics regarding consumption, waste quantities, and ways for valorizing these materials. Thus, vast research was undertaken in order to emphasize the main commodities and their potential application as adsorbents for organic and inorganic pollutants. The main methods or treatment techniques applied for the valorization of eco-materials as adsorbents were presented and the principal efficiency results were indicated. The advantages and disadvantages of using these eco-materials as adsorbents in wastewater treatment were revealed and future recommendations were established. According to the international statistics, the most purchased and consumed five commodities were studied regarding waste generations as potential conversion into eco-materials with an adsorbent role for water pollutants. Thus, the performances for adsorbents based on fruit wastes (such as citrus, banana, apples, grapes, mango) and vegetable wastes (such as potatoes, tomatoes, cabbage, carrots, cauliflower, and/or broccoli) were studied and highlighted in this research.

For a given aquatic ecosystem that will be used as a water source, it is necessary to establish the quality of the water from a microbiological point of view by identifying the pathogens present in the water. The aim of this study was to determine and analyze the antimicrobial activity of some biocides derived from garlic (garlic–methanol extract) and lavender (lavender–water extract). Their efficiency was evaluated at different concentrations and contact times. Initially, through specific laboratory analyses, the microbiological characteristics of the river were determined. Biomimetic studies on the antimicrobial activity of biocides based on garlic and lavender in surface waters involved detailed exploration of how the natural antimicrobial properties of these plants can be effectively utilized to treat water contaminated with harmful microorganisms. Both the contact time and the amount of biocide used have a significant effect on the microorganisms of interest. Thus, to describe the degradation rate of coliform bacteria, a pseudo-first-order and zero-order kinetic model was used, r=−(dN/dt)=kobs·t şi r0=kobs·N0=k0, where r is the rate of degradation of microorganisms (CFU/min), N0 is the initial number of microorganisms in the aqueous solution (colony-forming unit, CFU), N is the final number of microorganisms after a contact time t (CFU), kobs is the pseudo-first-order rate constant (min−1), t is the contact time (min), r0 is the initial rate of degradation of microorganisms (CFU/min), and k0 is the pseudo-rate constant zero order (min−1). Following 60 min of treatment with 1 mL of lavender-water biocide, the inhibition rate of pathogenic microorganisms in the water reached 59.09%, whereas, under the same conditions, the garlic–methanol biocide achieved an inhibition rate of 40.86%. This study confirms the antimicrobial activity of both lavender and garlic biocides, highlighting their potential in mitigating water pollution caused by pathogens.

We have developed an innovative thin-film nanocomposite membrane that contains cellulose acetate (CA) with small amounts of TiO2-decorated graphene oxide (GO) (ranging from 0.5 wt.% to 2 wt.%) sandwiched between two polytetrafluoroethylene (PTFE)-like thin films. The PTFE-like films succeeded in maintaining the bulk porosity of the support while increasing the thermal and chemical robustness of the membrane and boosting the catalytic activity of TiO2 nanoparticles. The membranes exhibited a specific chemical composition and bonding, with predominant carbon–oxygen bonds from CA and GO in the bulk, and carbon–fluorine bonds on their PTFE-like coated sides. We have also tested the membranes’ photocatalytic activities on azithromycin-containing wastewaters, demonstrating excellent efficiency with more than 80% degradation for 2 wt.% TiO2-decorated GO in the CA-GO-TiO2/PTFE-like membranes. The degradation of the azithromycin formulation occurs in two steps, with reaction rates being correlated to the amount of GO-TiO2 in the membranes.

Solid activators based on waste glass for the manufacture of one-part alkali-activated fly ash/red mud materials were synthesized, characterized, and tested in this work. The synthesis was carried out via alkaline fusion with sodium hydroxide at different reaction temperatures and at different sodium hydroxide/waste glass mass ratios. The results showed that the reaction temperature decisively influences the properties of the obtained solid activators. Thus, the best results regarding the water solubility of solid activators were obtained for the synthesis temperature of 600 °C, regardless of the sodium hydroxide/waste glass mass ratio. Also, the use of these assortments of solid activators led to obtaining the best compressive strength of one-part alkali-activated fly ash/red mud materials. The best results were obtained for the solid activator synthesized at a temperature of 600 °C and a sodium hydroxide/glass waste mass ratio of two.

In line with the development of industrial society, wastewater has caused multiple environmental problems. Contaminants of emerging concern (CECs) in water and wastewater are persistent, and for this reason they can cause serious problems for human health, animal health, and the whole environment. Therefore, it is absolutely necessary to apply efficient methods for the treatment of wastewater that has a high concentration of organic compounds. Over recent years, the prescribed and non-prescribed consumption of antibiotics has increased significantly worldwide. Large quantities of antibiotics are discharged into wastewater because of their incomplete absorption by living organisms. However, even small concentrations present in aquatic environments represent a major risk to human health and environment protection. This paper presents the main advantages and disadvantages of advanced oxidation processes, and the current state and new perspectives in the field of environment protection. This study summarizes data from the most recent specialized scientific literature that focuses on the topic of advanced oxidation processes, thus bringing all these aspects to the attention of researchers in a single work that adds comments and interpretations related to the presented processes. Advanced oxidation processes (AOPs) are often used in the treatment of different types of wastewater. AOPs are based on physicochemical processes that create significant structural changes in chemical species. The majority of antibiotics may be eliminated using physicochemical processes, such as photo-Fenton oxidation, photolysis, ozonation, electrooxidation, heterogeneous catalysis, and other bioprocesses. In comparison to conventional chemical processes, AOPs provide superior oxidation efficiency, ideal operating costs, and zero secondary pollutants.

The influence of some operating parameters of an UV photocatalytic reactor with TiO2/stainless steel photocatalytic membrane on the photocatalytic oxidation of 2,4-dichlorophenol from aqueous solutions was studied in this paper. It was shown that the pH of the working solution substantially influences the photocatalytic degradation of the organic substrate, with the degradation efficiency increasing with decreasing the pH of the working solution by a maximum corresponding to pH 3. The rate constant of the photocatalytic oxidation process is about twice as high at pH 3 comparative with pH 7 for the same initial concentration of the organic substrate. The molar ratio of hydrogen peroxide/organic substrate also influences the photocatalytic oxidation process of the organic substrate. The results obtained in this paper highlight the fact that a stoichiometric molar ratio is favorable for the photocatalytic degradation of 2,4-dichlorophenol. It has also been shown that the initial concentration of the organic substrate influences the rate of photocatalytic degradation. It appears that the rate of photocatalytic degradation decreases with the increasing of initial concentration of 2,4-dichlorophenol.

Given the known adverse effect of chlorophenols for the aquatic environments which they can reach, the development of efficient methods both technically and economically to remove them has gained increasing attention over time. The combination of photocatalytic oxidation with biological treatment can lead to high removal efficiencies of chlorophenols, while reducing the costs associated with the need to treat large volumes of aqueous solutions. Therefore, the present paper had as its main objective the identification of the minimum photocatalytic oxidation period during which the aqueous solutions of 4-chlorophenol and 2,4-dichlorophenol can be considered as readily biodegradable. Thus, the results of photocatalytic oxidation and biodegradability tests showed that, regardless of the concentration of chlorophenol and its type, the working solutions become readily biodegradable after up to 120 min of irradiation in ultraviolet light. At this irradiation time, the maximum organic content of the aqueous solution is less than 40%, and the biochemical oxygen demand and chemical oxygen demand (BOD/COD) ratio is much higher than 0.4. The maximum specific heterotrophic growth rate of activated sludge has an average value of 4.221 d−1 for 4-chlorophenol, and 3.126 d−1 for 2,4-dichlorophenol. This irradiation period represents at most half of the total irradiation period necessary for the complete mineralization of the working solutions. The results obtained were correlated with the intermediates identified during the photocatalytic oxidation. It seems that, working solutions initially containing 4-chlorophenol can more easily form readily biodegradable intermediates.

New photocatalytic membranes based on polylactic acid (PLA)/TiO2 hybrid nanofibers deposited on fiberglass supports were prepared and tested for the removal of ampicillin from aqueous solutions. The electrospinning technique was used to obtain hybrid nanofibers that were deposited on three types of fiberglass with different structures, resulting in three distinct photocatalytic membranes namely fiberglass fabric plain woven-type membrane, fiberglass mat-type membrane, and fiberglass fabric one-fold edge-type membrane. The results of the photocatalytic tests showed that the highest efficiency of ampicillin removal from aqueous solution is obtained with the fiberglass fabric plain woven-type membrane. Although it has been shown that the rate of photocatalytic degradation of ampicillin is high, being practically eliminated within the first 30 min of photocatalysis, the degree of mineralization of the aqueous solution is low even after two hours of photocatalysis due to the degradation of PLA from the photocatalytic membrane. The instability of PLA in the reactive environment of the photocatalytic reactor, evidenced by morphological, mineralogical and spectroscopic analyzes as well as by kinetic studies, is closely related to the structure of the fiberglass membrane used as a support for PLA/TiO2 hybrid nanofibers.