Search

The development of UAV sensors has made it possible to obtain a diverse array of spectral images in a single flight. In this study, high-resolution UAV-derived images of urban areas were employed to create land cover maps, including car-road, sidewalk, and street vegetation. A total of nine orthoimages were produced, and the variables effective in producing UAV-based land cover maps were identified. Based on analyses of the object-based images, 126 variables were derived by computing 14 statistical values for each image. The random forest (RF) classifier was used to evaluate the priority of the 126 variables. This was followed by optimizing the RF through variable reduction and by comparing the initial and optimized RF, the utility of the high-priority variable was evaluated. Computing variable importance, the most influential variables were evaluated in the order of normalized digital surface model (nDSM), normalized difference vegetation index (NDVI), land surface temperature (LST), soil adjusted vegetation index (SAVI), blue, green, red, rededge. Finally, no significant changes between initial and optimized RF in the classification were observed from a series of analyses even though the reduced variables number was applied for the classification.

Since outdoor compost piles (OCPs) contain large amounts of nitrogen and phosphorus, they act as a major pollutant that deteriorates water quality, such as eutrophication and green algae, when the OCPs enter the river during rainfall. In South Korea, OCPs are frequently used, but there is a limitation that a lot of manpower and budget are consumed to investigate the current situation, so it is necessary to efficiently investigate the OCPs. This study compared the accuracy of various machine learning techniques for the efficient detection and management of outdoor compost piles (OCPs), a non-point pollution source in agricultural areas in South Korea, using unmanned aerial vehicle (UAV) images. RGB, multispectral, and thermal infrared UAV images were taken in August and October 2019. Additionally, vegetation indices (NDVI, NDRE, ENDVI, and GNDVI) and surface temperature were also considered. Four machine learning techniques, including support vector machine (SVM), decision tree (DT), random forest (RF), and k-NN, were implemented, and the machine learning technique with the highest accuracy was identified by adjusting several variables. The accuracy of all machine learning techniques was very high, reaching values of up to 0.96. Particularly, the accuracy of the RF method with the number of estimators set to 10 was highest, reaching 0.989 in August and 0.987 in October. The proposed method allows for the prediction of OCP location and area over large regions, thereby foregoing the need for OCP field measurements. Therefore, our findings provide highly useful data for the improvement of OCP management strategies and water quality.

Water quality deterioration due to outdoor loading of livestock manure requires efficient management of outside manure piles (OMPs). This study was designed to investigate OMPs using unmanned aerial vehicles (UAVs) for efficient management of non-point source pollution in agricultural areas. A UAV was used to acquire image data, and the distribution and cover installation status of OMPs were identified through ortho-images; the volumes of OMP were calculated using digital surface model (DSM). UAV- and terrestrial laser scanning (TLS)-derived DSMs were compared for identifying the accuracy of calculated volumes. The average volume accuracy was 92.45%. From April to October, excluding July, the monthly average volumes of OMPs in the study site ranged from 64.89 m3 to 149.69 m3. Among the 28 OMPs investigated, 18 were located near streams or agricultural waterways. Establishing priority management areas among the OMP sites distributed in a basin is possible using spatial analysis, and it is expected that the application of UAV technology will contribute to the efficient management of OMPs and other non-point source pollutants.

In this study, aquatic plants in a small reservoir were detected using multispectral UAV (Unmanned Aerial Vehicle) imagery and various vegetation indices. A Firefly UAV, which has both fixed-wing and rotary-wing flight modes, was flown over the study site four times. A RedEdge camera was mounted on the UAV to acquire multispectral images. These images were used to analyze the NDVI (Normalized Difference Vegetation Index), ENDVI (Enhance Normalized Difference Vegetation Index), NDREI (Normalized Difference RedEdge Index), NGRDI (Normalized Green-Red Difference Index), and GNDVI (Green Normalized Difference Vegetation Index). As for multispectral characteristics, waterside plants showed the highest reflectance in Rnir, while floating plants had a higher reflectance in Rre. During the hottest season (on 25 June), the vegetation indices were the highest, and the habitat expanded near the edge of the reservoir. Among the vegetation indices, NDVI was the highest and NGRDI was the lowest. In particular, NGRDI had a higher value on the water surface and was not useful for detecting aquatic plants. NDVI and GNDVI, which showed the clearest difference between aquatic plants and water surface, were determined to be the most effective vegetation indices for detecting aquatic plants. Accordingly, the vegetation indices using multispectral UAV imagery turned out to be effective for detecting aquatic plants. A further study will be accompanied by a field survey in order to acquire and analyze more accurate imagery information.

The accuracy of land surface temperatures (LSTs) acquired by an unmanned aerial vehicle (UAV) was verified by comparison with in-situ LSTs of various land cover materials at the Changwon National University Campus, Changwon City, South Korea. UAV imaging and in-situ measurements were performed on 31 July and 2 August 2019. During the in-situ measurements, LST was measured at 160 points using an infrared thermometer. The linear regression model between the UAV and in-situ measurements exhibited a very high correlation on both days, with R2 values greater than 0.7004. The root mean square error (RMSE), however, was 4.030 °C on 31 July and 5.446 °C on 2 August and it also varied depending on the land cover type. These results may depend on various factors, such as the field of view and performance of the TIR (Thermal infrared radiance) camera, as well as the weather and atmospheric conditions. Accurately diagnosing the thermal characteristics of urban areas based on the spatial elements can be used to accurately analyze the thermal characteristics of urban areas and to make effective policy decisions. Techniques for verifying and improving the accuracy of UAV TIR LST data for various land cover materials are required to enable precise investigation of the thermal characteristics of urban areas.