Search

The necessity for the aquatic ecological risk assessment for benzophenone-3 (BP-3) is increasing due to its high toxic potential and high detection frequency in freshwater. The initial step in the ecological risk assessment is to determine predicted no-effect concentration (PNEC). This study derived PNEC of BP-3 in freshwater using a species sensitivity distribution (SSD) approach, whilst existing PNECs are derived using assessment factor (AF) approaches. A total of eight chronic toxicity values, obtained by toxicity testing and a literature survey, covering four taxonomic classes (fish, crustaceans, algae, and cyanobacteria) were used for PNEC derivation. Therefore, the quantity and quality of the toxicity data met the minimum requirements for PNEC derivation using an SSD approach. The PNEC derived in this study (73.3 μg/L) was far higher than the environmental concentration detected in freshwater (up to 10.4 μg/L) as well as existing PNECs (0.67~1.8 μg/L), mainly due to the difference in the PNEC derivation methodology (i.e., AF vs. SSD approach). Since the SSD approach is regarded as more reliable than the AF approach, we recommend applying the PNEC value derived in this study for the aquatic ecological risk assessment of BP-3, as the use of the existing PNEC values seems to unnecessarily overestimate the potential ecological risk of BP-3 in freshwater.

The objective of this study was to investigate the behavior of zinc incorporation into newly forming fuel deposits and pre-formed deposits in a simulated pressurized water reactor coolant including 1000 ppm of boron and 2 ppm of lithium at 328 &deg, C. Zinc was incorporated into fuel deposits that were being newly nucleated and grown on nuclear fuel cladding tubes in a zinc-containing coolant. The zinc incorporation resulted in a decrease in the lattice constant of the deposits, which was attributed to the decrease in larger iron content and the corresponding incorporation of smaller zinc in the deposits. However, zinc incorporation was not found, even after the fuel deposits pre-formed before zinc addition were subsequently exposed to the 60 ppb of zinc coolant for 500 h.

Nitrogen oxide (NOx) emissions from the South Korean cement industry are investigated with remote-sensing measurements, surface observations, and in situ aircraft measurements. In the Yeongwol, Danyang, and Jecheon regions of central South Korea, six closely located cement factories produce 31 million tons of cement annually. Their impact on the regional environment has been a public-policy issue, but their pollutants have not been continuously monitored nor have emissions inventories been fully verified. Using a newly developed downscaling technique, remote-sensing analyses show that Ozone Monitoring Instrument (OMI) NO2 column densities over the cement kilns have more than twice the modeled concentrations, indicating that the kilns are one of the most dominant NOx emission point sources in South Korea. Observed NOx emissions are stronger in the spring, suggesting that these sources play an important role in the formation of surface ozone and secondary particulate matter. These emissions also slightly increased in recent years, even while most major South Korean cities posted a declining trend in NOx emissions. Photochemical models (during May to July 2015) demonstrate that emissions from the South Korean cement industry have significant environmental impacts, both on surface ozone (up to approximately 4 ppb) and PM2.5 (up to approximately 2 &micro, g/m3).