Search

In this study, the effects of adding glutamate (Glu), glutamine (Gln), aspartate (Asp), and asparagine (Asn) on the flavor formation of Huangjiu were investigated, and the effect of Gln concentration on the quality, microbial community structure, and flavor development of Huangjiu was further explored. Varied Gln concentrations influenced yeast growth, sugar utilization, microbial communities, and quality attributes. Additional Gln promoted yeast cell counts and sugar depletion. It increased the complexity of bacterial co-occurrence networks and reduced the impact of stochastic processes on assembly. Correlation analysis linked microorganisms to flavor compounds. Isolation experiments verified the role of Saccharomyces cerevisiae, Aspergillus chevalieri, Bacillus altitudinis, and Lactobacillus coryniformis in flavor production under Gln conditions. This research elucidated the microbiological mechanisms by which amino acid supplementation, especially Gln, enhances Huangjiu quality by modulating microbial metabolic functions and community dynamics during fermentation. This research is significant for guiding the production of Huangjiu and enhancing its quality.

Cordycepin is considered a major bioactive component in Cordyceps militaris extract. This study was performed to evaluate the ameliorative effect of Cordyceps militaris extract (CME) and cordycepin (CPN) supplementation on intestinal damage in LPS-challenged piglets. The results showed that CPN or CME supplementation significantly increased the villus height (p < 0.01) and villus height/crypt depth ratio (p < 0.05) in the jejunum and ileum of piglets with LPS-induced intestinal inflammation. Meanwhile, CPN or CME supplementation alleviated oxidative stress and inflammatory responses by reducing the levels of MDA (p < 0.05) and pro-inflammatory cytokines in the serum. Additionally, supplementation with CPN or CME modulated the structure of the intestinal microbiota by enriching short-chain fatty acid-producing bacteria, and increased the level of butyrate (p < 0.05). The RNA-seq results demonstrated that CME or CPN altered the complement and coagulation-cascade-related genes (p < 0.05), including upregulating gene KLKB1 while downregulating the genes CFD, F2RL2, CFB, C4BPA, F7, C4BPB, CFH, C3 and PROS1, which regulate the complement activation involved in inflammatory and immune responses. Correlation analysis further demonstrated the potential relation between the gut microbiota and intestinal inflammation, oxidative stress, and butyrate in piglets. In conclusion, CPN or CME supplementation might inhibit LPS-induced inflammation and oxidative stress by modulating the intestinal microbiota and its metabolite butyrate in piglets.

The maturation of wireless connectivity, blockchain (distributed ledger technologies), and intelligent systems has fostered a comprehensive ecosystem for the Internet of Things (IoT). However, the growing volume of data generated by IoT devices creates substantial pressure on blockchain storage and computation capabilities, impeding the further development of the IoT ecosystem. Decentralizing data storage across multiple chains and utilizing cross-chain technology for data exchange eliminates the need for expensive centralized infrastructure, lowers data transfer costs, and improves accessibility. Hence, the issue of computational and storage pressure in blockchain can be improved. Nonetheless, the data of IoT devices are constantly updating, and ensuring consistency for dynamic data across heterogeneous chains remains a significant challenge. To address the aforementioned challenge, we propose a blockchain-based distributed and lightweight data consistency verification model (BDCA), which leverages a batch verification dynamic Merkle hash tree (BV-MHT) and an advanced gamma multi-signature scheme (AGMS) to enable consistent verification of dynamic data while ensuring secure and private data transmission. The AGMS scheme is reliable and robust based on security analysis while the dependability and consistency of BDCA are verified through inductive reasoning. Experimental results indicate that BDCA outperforms CPVPA and Fortress in communication and computation overhead for data preprocessing and auditing in a similar condition, and the AGMS scheme exhibits superior performance when compared to other widely adopted multi-signature schemes such as Cosi, BLS, and RSA. Furthermore, BDCA provides up to 99% data consistency guarantees, demonstrating its practicality.

A two-motor power-split dedicated hybrid transmission (DHT) with two planetary gears is proposed for the applications of a hybrid electric vehicle (HEV) and plug-in HEV (PHEV). The proposed DHT can provide electronically controlled continuous variable transmission (eCVT) with two different gear ratios. One of two electric motors is employed to act as a speeder for splitting the input power of internal combustion engine (ICE) and the other acts as a torquer to assist ICE for boosting. Assisted by an electric motor, ICE can always be enhanced to operate at its efficient area for the benefits of fuel economy improvement. The maximum ICE torque is viable to be mechanically transmitted to vehicle wheels from standstill with two different gear ratios. This feature can help reduce the traction motor torque and power sizing significantly. The paper presents detailed theoretical analyses of the proposed eCVT. Comprehensive simulation demonstrations for a pickup truck HEV application are given to address that the vehicle fuel consumption can be considerably reduced without compromising acceleration performance.

Rotating blade vibration measurements are very important for any turbomachinery research and development program. The blade tip timing (BTT) technique uses the time of arrival (ToA) of the blade tip passing the casing mounted probes to give the blade vibration. As a non-contact technique, BTT is necessary for rotating blade vibration measurements. The higher accuracy of amplitude and vibration frequency identification has been pursued since the development of BTT. An improved circumferential Fourier fit (ICFF) method is proposed. In this method, the ToA is not only dependent on the rotating speed and monitoring position, but also on blade vibration. Compared with the traditional circumferential Fourier fit (TCFF) method, this improvement is more consistent with reality. A 12-blade assembly simulator and experimental data were used to evaluate the ICFF performance. The simulated results showed that the ICFF performance is comparable to TCFF in terms of EO identification, except the lower PSR or more number probes that have a more negative effect on ICFF. Besides, the accuracy of amplitude identification is higher for ICFF than TCFF on all test conditions. Meanwhile, the higher accuracy of the reconstruction of ICFF was further verified in all measurement resonance analysis.

Aiming at the application demand in underwater noise monitoring, observation of marine animal, antisubmarine and underwater target localization, a high-SNR underwater acoustic signal acquisition (UASA) node that combines a self-contained acquisition system and floating platform is designed to improve the acquisition performance of a single UASA node, and a high-accuracy synchronization sampling method among multiple distributed UASA nodes based on master-slave dual phase-locked loops (MSDPLL) is proposed to improve the synchronization sampling accuracy. According to the equivalent model of hydrophone and application requirements, low noise signal conditioning circuit and large-capacity data storage modules are designed. Based on the long-term monitoring requirements for underwater acoustic signal and distributed positioning requirements for underwater targets, the structure of a single UASA node is designed and MSDPLL is developed for high-accuracy synchronization sampling among multiple UASA nodes. Related experimental results verified the performance of the UASA node and the synchronization sampling method.

Motion control of unmanned surface vehicles (USVs) is a crucial issue in sailing performance and navigation costs. The actuators of USVs currently available are mostly a combination of thrusters and rudders. The modeling for USVs with rudderless double thrusters is rarely studied. In this paper, the three degrees of freedom (DOFs) dynamic model and propeller thrust model of this kind of USV were derived and combined. The unknown parameters of the propeller thrust model were reduced from six to two. In the three-DOF model, the propulsion of the USV was completely provided by the resultant force generated by double thrusters and the rotational moment was related to the differential thrust. It combined the propeller thrust model to represent the thrust in more detail. We performed a series of tests for a 1.5 m long, 50 kg USV, in order to obtain the model parameters through system identification. Then, the accuracy of the modeling and identification results was verified by experimental testing. Finally, based on the established model and the proportional derivative+line of sight (PD+LOS) control algorithm, the path-following control of the USV was achieved through simulations and experiments. All these demonstrated the validity and practical value of the established model.

It is important to obtain accurate dynamic vibrations of steam turbine blades for safe operation. Strain gauge (SG) measurements cannot fully obtain vibrations of all blades and nodal diameter (ND) details. The blade tip timing (BTT) technique could resolve this problem because it has the advantage of measuring all blades’ vibrations. This article proposed an improved BTT technique for measuring synchronous vibrations of shrouded blades in a steam turbine based on fiber optical sensors with lenses. The newly developed sensor was equipped with a Plano-convex lens, and the optical path was specifically designed to collimate the beam within a large working distance from 4 to 19 mm and improve the measuring accuracy. A method to search the spectra of all peak vibration amplitudes of all the blades was proposed to obtain the ND details of synchronous vibration. Experimental results validated the efficiency and accuracy of the proposed methods and sensors. Comparison results of BTT measurements with SG measurements showed that the relative errors of normalized frequency and strain were small and acceptable.

In this paper, an online to offline (O2O) method based on visible light communication (VLC) is proposed, which is different from the traditional VLC with modulation and demodulation. It is a new VLC with modulation and recognition. We use RGB light emitting diode (RGB-LED) as the transmitter, and use Pulse Width Modulation (PWM) to modulate the signal to make it flicker at high frequency. Therefore, several features are created. At the receiver, the complementary metal-oxide-semiconductor (CMOS) image sensor is applied to our system to capture LED images with stripes. A convolution neural network (CNN) is then introduced in our system as a classifier. By offline training for the classifiers and online recognition of LED-ID, the scheme proposed could improve the speed of LED-ID (the unique identification of each different LED) identification and improve the robustness of the system. This is the first application of CNN in the field of VLC.

The blade tip timing (BTT) technique has been widely used in rotation machinery for non-contact blade vibration measurements. As BTT data is under-sampled, it requires complicated algorithms to reconstruct vibration parameters. Before reconstructing the vibration parameters, the right data segment should first be extracted from the massive volumes of BTT data that include noise from blade vibration events. This step requires manual intervention, is highly dependent on the skill of the operator, and has also made it difficult to automate BTT technique applications. This article proposes an included angle distribution (IAD) correlation method between adjacent revolutions to identify blade vibration events automatically in real time. All included angles of the rotor between any two adjacent blades were accurately detected by only one fiber optical tip timing sensor. Three formulas for calculating IAD correlation were then proposed to identify three types of blade vibration events: the blades’ overall vibrations, vibration of the adjacent two blades, and vibration of a specific blade. Further, the IAD correlation method was optimized in the calculating process to reduce computation load when identifying every blade’s vibration events. The presented IAD correlation method could be used for embedded, real-time, and automatic processing applications. Experimental results showed that the proposed method could identify all vibration events in rotating blades, even small events which may be wrongly identified by skillful operators.

The covertness of the active sonar is a very important issue and the sonar signal waveform design problem was studied to improve covertness of the system. Many marine mammals produce call pulses for communication and echolocation, and existing interception systems normally classify these biological signals as ocean noise and filter them out. Based on this, a bio-inspired covert active sonar strategy was proposed. The true, rather than man-made sperm whale, call pulses were used to serve as sonar waveforms so as to ensure the camouflage ability of sonar waveforms. A range and velocity measurement combination (RVMC) was designed by using two true sperm whale call pulses which had excellent range resolution (RR) and large Doppler tolerance (DT). The range and velocity estimation methods were developed based on the RVMC. In the sonar receiver, the correlation technology was used to confirm the start and end time of sonar signals and their echoes, and then based on the developed range and velocity estimation method, the range and velocity of the underwater target were obtained. Then, the RVMC was embedded into the true sperm whale call-train to improve the camouflage ability of the sonar signal-train. Finally, experiment results were provided to verify the performance of the proposed method.

Blade tip timing is an effective method for blade vibration measurements in turbomachinery. This method is increasing in popularity because it is non-intrusive and has several advantages over the conventional strain gauge method. Different kinds of sensors have been developed for blade tip timing, including optical, eddy current and capacitance sensors. However, these sensors are unsuitable in environments with contaminants or high temperatures. Microwave sensors offer a promising potential solution to overcome these limitations. In this article, a microwave sensor-based blade tip timing measurement system is proposed. A patch antenna probe is used to transmit and receive the microwave signals. The signal model and process method is analyzed. Zero intermediate frequency structure is employed to maintain timing accuracy and dynamic performance, and the received signal can also be used to measure tip clearance. The timing method uses the rising and falling edges of the signal and an auto-gain control circuit to reduce the effect of tip clearance change. To validate the accuracy of the system, it is compared experimentally with a fiber optic tip timing system. The results show that the microwave tip timing system achieves good accuracy.