Search

Background: Psoriasis is a chronic, multisystemic, inflammatory disease affecting approximately 1% of children and significantly reducing their health-related quality of life. Etanercept is a biologic fusion protein-blocking TNF-α and belongs to one of the biologics used among the children population. The purpose of this study was to assess the effectiveness and safety profile of etanercept in paediatric patients with plaque-type psoriasis. Material and methods: The outcome of the treatment was evaluated based on Psoriasis Area and Severity Index (PASI), Body Surface Area (BSA), and Children’s Dermatology Life Quality Index (CDLQI). Achievement of at least PASI75 at week 16 was assessed as an adequate response to therapy, which was the primary endpoint. Results: Forty-three paediatric patients were included in the study, 24 females and 19 males. The average age at inclusion into our study was 13 years. At baseline, the mean PASI score, BSA, and CDLQI were 16.3 ± 6.5, 22.3 ± 12.2%, and 17.4 ± 5.3, respectively. At week 16, 90.7% of patients achieved PASI 50, 79.1% achieved PASI 75, and 46.5% attained PASI 90. There was also a decrease in mean BSA and CDLQI values to 3.5 ± 3.8 and 5.4 ± 5.7, respectively. Conclusions: Etanercept proved to be effective, safe, and well-tolerated among the paediatric population with psoriasis.

Nicotinamide (NA) derivatives play crucial roles in various biological processes, such as inflammation, regulation of the cell cycle, and DNA repair. Recently, we proposed that 4-pyridone-3-carboxamide-1-β-D-ribonucleoside (4PYR), an unusual derivative of NA, could be classified as an oncometabolite in bladder, breast, and lung cancer. In this study, we investigated the relations between NA metabolism and the progression, recurrence, metastasis, and survival of patients diagnosed with different histological subtypes of renal cell carcinoma (RCC). We identified alterations in plasma NA metabolism, particularly in the clear cell RCC (ccRCC) subtype, compared to papillary RCC, chromophobe RCC, and oncocytoma. Patients with ccRCC also exhibited larger tumor sizes and elevated levels of diagnostic serum biomarkers, such as hsCRP concentration and ALP activity, which were positively correlated with the plasma 4PYR. Notably, 4PYR levels were elevated in advanced stages of ccRCC cancer and were associated with a highly aggressive phenotype of ccRCC. Additionally, elevated concentrations of 4PYR were related to a higher likelihood of mortality, recurrence, and particularly metastasis in ccRCC. These findings are consistent with other studies, suggesting that NA metabolism is accelerated in RCC, leading to abnormal concentrations of 4PYR. This supports the concept of 4PYR as an oncometabolite and a potential prognostic factor in the ccRCC subtype.

The effects of physical factors such as radiation (electromagnetic, microwave, infrared, laser, UVC, and X-ray) and high temperature, as well as chemical factors (controlled atmosphere) on the level of global DNA cytosine methylation in C. albicans ATCC 10231 cells were investigated. Prolonged exposure to each type of radiation significantly increased the DNA methylation level. In addition, the global methylation level in C. albicans cells increased with the incubation temperature. An increase in the percentage of methylated DNA was also noted in C. albicans cells cultured in an atmosphere with reduced O2. In contrast, in an atmosphere containing more than 3% CO2 and in anaerobic conditions, the DNA methylation level decreased relative to the control. This study showed that prolonged exposure to various types of radiation and high temperature as well as reduced O2 in the atmosphere caused a significant increase in the global DNA methylation level. This is most likely a response protecting DNA against damage, which at the same time can lead to epigenetic disorders, and in consequence can adversely affect the functioning of the organism.

An experimental analysis of mechanical behaviour for aluminium-based fibre metal laminates under compression after impact was conducted. Damage initiation and propagation were evaluated for critical state and force thresholds. Parametrization of laminates was done to compare their damage tolerance. Relatively low-energy impact had a marginal effect on fibre metal laminates compressive strength. Aluminium–glass laminate was more damage-resistant than one reinforced with carbon fibres (6% vs. 17% of compressive strength loss); however, aluminium–carbon laminate presented greater energy dissipation ability (around 30%). Significant damage propagation before the critical load was found (up to 100 times the initial damaged area). Damage propagation for assumed load thresholds was minor in comparison to the initial damage size. Metal plastic strain and delaminations are dominant failure modes for compression after impact.

Dyes are highly toxic and persistent in the environment. Their presence in water causes environmental and social problems. Dyes must be effectively removed from the water. A UV/ZVI/H2O2 process was applied to decompose two organic dyes, AM E123 and AM ACID. A commercial ZVI product, Ferox Flow, was used, and its properties were determined using SEM and XRF. The zeta potential, surface area, and optical properties of ZVI were also determined. The efficiency of dye removal in optimal conditions was 85.5% and 80.85% for AM E123 and AM ACID, respectively. Complete decolorization was observed in all samples. The decomposition of both dyes occurred according to a modified pseudo-second-order reaction and there was a statistically significant correlation between the TOC decrease, pH, and process time. The catalyst was observed to have high stability, and this was not affected by the performance of the treatment process even after the third cycle, as confirmed by the results of the catalyst surface analysis and iron diffusion test. Slight differences in process efficiency were observed after each cycle. The need for only a small amount of catalyst to decompose AM E123 and AM ACID, coupled with the ability to reuse the catalyst without the need for prior preparation, may reduce catalyst purchase costs.

Two types of lung cells (epithelial cancer lung cells, A-549 and lung fibroblasts MRC-5) were exposed to the clinically established gold drug auranofin at concentrations close to the half-maximal inhibitory drug concentrations (IC50). Collected cells were subjected to speciation analysis using inductively coupled plasma mass spectrometry (ICP-MS). Auranofin showed better affinity toward proteins than DNA, RNA, and hydrophilic small molecular weight compounds. It can bind to proteins that vary in size (~20 kDa, ~75 kDa, and ≥200 kDa) and pI. However, the possibility of dimerization and protein–protein complex formation should also be taken into account. µRPLC/CZE-ESI-MS/MS studies on trypsinized proteins allowed the indication of 76 peptides for which signal intensity was influenced by auranofin presence in cells. Based on it, identity was proposed for 20 proteins. Except for thioredoxin reductase (TrxR), which is directly targeted by gold complex, the proteins were found to be transformed. Five indicated proteins: myosin, plectin, talin, two annexins, and kinase M3K5, are responsible for cell–cell, cell–protein interactions, and cell motility. A wound healing test confirmed their regulation by auranofin as cell migration decreased by 40% while the cell cycle was not interrupted.

Kidney transplantation from a donor with latent BKPyV might be the cause of serious complications, such as BK virus-associated nephropathy. The aim of the study was to determine the prevalence of BKPyV infection in donors after brain death (DBDs), to analyse the molecular variation of BKPyV and to compare clinical and inflammation parameters of DBDs infected with various genotypes of BKPyV. BKPyV was investigated in blood and urine samples of 103 DBDs using PCR followed by sequencing and bioinformatic analysis, and the viral load was assessed by qPCR. Clinical parameters, including cellular markers of inflammation were assessed. The results confirm high prevalence of BKPyV (48%),and genotype IV (49%) over genotype I (43%) and the co-infection with genotypes I and IV in 8.2%. Viral load ranged from 102 to 107 copies/mL, with an average of 1.92 × 106 copies/mL. No specific markers for BKPyV infection were detected among the parameters tested. Infection with genotype I may be associated with the adverse impact on thekidney function, while infection with genotype IV was associated with the anemia Not only the viral load but also the genotype of BKPyV may have an impact on the course of infection.

Two-dimensional compounds with nanostructural features are attracting attention from researchers worldwide. Their multitude of applications in various fields and vast potential for future technology advancements are successively increasing the research progress. Wastewater treatment and preventing dangerous substances from entering the environment have become important aspects due to the increasing environmental awareness, and increasing consumer demands have resulted in the appearance of new, often nonbiodegradable compounds. In this review, we focus on using the most promising 2D materials, such as MXenes, Bi2WO6, and MOFs, as catalysts in the modification of the Fenton process to degrade nonbiodegradable compounds. We analyze the efficiency of the process, its toxicity, previous environmental applications, and the stability and reusability of the catalyst. We also discuss the catalyst’s mechanisms of action. Collectively, this work provides insight into the possibility of implementing 2D material-based catalysts for industrial and urban wastewater treatment.

The BK polyomavirus (BKPyV) is a widespread pathogen in humans. Polymorphism of the region encoding the VP1 protein of BKPyV provides the basis for classifying the virus into types and subtypes, whose frequency varies depending on geographic location. The aim of our study was to determine the frequency of BKPyV in the Polish population and to assess its variation by analysing polymorphism in the typing region. The study was conducted on 168 healthy, Polish volunteers, whose blood (plasma) and urine were sampled. The virus was detected using PCR, products, sequenced and subjected to bioinformatic analysis. In addition, viral load was assessed by qPCR. The presence of the genetic material of the BK virus was noted in 61/168 urine samples but in none of the plasma sample. Sequencing and phylogenetic analysis confirmed that the BKPyV isolates were of types I and IV, dominant in Europe (63.93% and 36.07%, respectively). All isolates from genotype I belonged to subtype Ib-2, showing polymorphism at position 1809 with a frequency of 61.54% (G1809A) and 38.46% (G1809C). To the best of our knowledge, this is the first study of this magnitude on the genetic variation of BKPyV among healthy volunteers in Poland.

In this work, NiTi alloy parts were fabricated using laser powder bed fusion (LBPF) from pre-alloyed NiTi powder and in situ alloyed pure Ni and Ti powders. Comparative research on the corrosive and biological properties of both studied materials was performed. Electrochemical corrosion tests were carried out in phosphate buffered saline at 37 °C, and the degradation rate of the materials was described based on Ni ion release measurements. Cytotoxicity, bacterial growth, and adhesion to the surface of the fabricated coupons were evaluated using L929 cells and spherical Escherichia coli (E. coli) bacteria, respectively. The in situ alloyed NiTi parts exhibit slightly lower corrosion resistance in phosphate buffered saline solution than pre-alloyed NiTi. Moreover, the passive layer formed on in situ alloyed NiTi is weaker than the one formed on the NiTi fabricated from pre-alloyed NiTi powder. Furthermore, in situ alloyed NiTi and NiTi made from pre-alloyed powders have comparable cytotoxicity and biological properties. Overall, the research has shown that nitinol sintered using in situ alloyed pure Ni and Ti is potentially useful for biomedical applications.

In this study, we developed a strategy to determine atto- and femtomolar amounts of metal ions in lysates and mineralizates of cells (human non-small-cell lung carcinoma (NSCLC, A549) and normal lung (MRC-5)) exposed to cytotoxic metallo-drugs: cisplatin and auranofin at concentrations close to the half-maximal inhibitory drug concentrations (IC50). The developed strategy combines data obtained using biological and chemical approaches. Cell density was determined using two independent cell staining assays using trypan blue, calcein AM/propidium iodide. Metal concentrations in lysed and mineralized cells were established employing a mass spectrometer with inductively coupled plasma (ICP-MS) and equipped with a cross-flow nebulizer working in aspiration mode. It allowed for detecting of less than 1 fg of metal per cell. To decrease the required amount of sample material (from 1.5 mL to ~100 µL) without loss of sensitivity, the sample was introduced as a narrow band into a constant stream of liquid (flow-injection analysis). It was noticed that the selectivity of cisplatin accumulation by cells depends on the incubation time. This complex is accumulated by cells at a lower efficiency than auranofin and is found primarily in the lysate representing the cytosol. In contrast, auranofin interacts with water-insoluble compounds. Despite their different mechanism of action, both metallo-drugs increased the accumulation of transition metal ions responsible for oxidative stress.

The combination of fibre metal laminates (FML) and sandwich structures can significantly increase the performance under impact of FMLs. The goal of this work was to create a material that will combine the superior properties of FMLs and foam sandwich structures in terms of the impact resistance and simultaneously have lower density and fewer disadvantages related to the manufacturing. An extensive impact testing campaign has been done using conventional fibre metal laminates (carbon- and glass-based) and in the proposed fibre foam metal laminates to assess and compare their behaviour. The main difference was observed in the energy absorption mechanisms. The dominant failure mechanism for fibre foam laminates is the formation of delaminations and matrix cracks while in the conventional fibre metal laminate the main failure mode is fibre cracking due to high local stress concentrations. The reduction in the fibre cracking leads to a better after-impact resistance of this type of structure improving the safety of the structures manufactured with these materials.

The BK polyomavirus (BKPyV), a representative of the family Polyomaviridae, is widespread in the human population. While the virus does not cause significant clinical symptoms in immunocompetent individuals, it is activated in cases of immune deficiency, both pharmacological and pathological. Infection with the BKPyV is of particular importance in recipients of kidney transplants or HSC transplantation, in which it can lead to the loss of the transplanted kidney or to haemorrhagic cystitis, respectively. Four main genotypes of the virus are distinguished on the basis of molecular differentiation. The most common genotype worldwide is genotype I, with a frequency of about 80%, followed by genotype IV (about 15%), while genotypes II and III are isolated only sporadically. The distribution of the molecular variants of the virus is associated with the region of origin. BKPyV subtype Ia is most common in Africa, Ib-1 in Southeast Asia, and Ib-2 in Europe, while Ic is the most common variant in Northeast Asia. The development of molecular methods has enabled significant improvement not only in BKPyV diagnostics, but in monitoring the effectiveness of treatment as well. Amplification of viral DNA from urine by PCR (Polymerase Chain Reaction) and qPCR Quantitative Polymerase Chain Reaction) is a non-invasive method that can be used to confirm the presence of the genetic material of the virus and to determine the viral load. Sequencing techniques together with bioinformatics tools and databases can be used to determine variants of the virus, analyse their circulation in populations, identify relationships between them, and investigate the directions of evolution of the virus.

Prenatal and postnatal supplementation with β-hydroxy-β-methylbutyrate (HMB) and alpha-ketoglutaric acid (AKG) affects the development and maturation of offspring. Both substances have the potential to stimulate cell metabolism via different routes. However, parity affects development and may alter the effects of dietary supplementation. This study aimed to evaluate the effect of gestational supplementation with HMB and/or AKG to primiparous and multiparous minks on the structure and maturation of the offspring’s small intestine. Primiparous and multiparous American minks (Neovison vison), of the standard dark brown type, were supplemented daily with HMB (0.02 g/kg b.w.) and/or AKG (0.4 g/kg b.w.) during gestation (n = 7 for each treatment). Supplementation stopped when the minks gave birth. Intestine samples were collected from 8-month-old male and female offspring during autopsy and histology and histomorphometry analysis was conducted (LAEC approval no 64/2015). Gestational supplementation had a long-term effect, improving the structure of the offspring’s intestine toward facilitating absorption and passage of intestinal contents. AKG supplementation affected intestinal absorption (enterocytes, villi and absorptive surface), and HMB affected intestinal peristalsis and secretion (crypts and Goblet cells). These effects were strongly dependent on parity and offspring gender. Present findings have important nutritional implications and should be considered in feeding practices and supplementation plans in animal reproduction.

Point-of-use (POU) water treatment systems and devices play an essential role in limited access to sanitary safe water resources. The filtering materials applied in POU systems must effectively eliminate contaminants, be readily produced and stable, and avoid secondary contamination of the treated water. We report an innovative, 2D Ti3C2/Al2O3/Ag/Cu nanocomposite-modified filtration material with the application potential for POU water treatment. The material is characterized by improved filtration velocity relative to an unmodified reference material, effective elimination of microorganisms, and self-disinfecting potential, which afforded the collection of 99.6% of bacteria in the filter. The effect was obtained with nanocomposite levels as low as 1%. Surface oxidation of the modified material increased its antimicrobial efficiency. No secondary release of the nanocomposites into the filtrate was observed and confirmed the stability of the material and its suitability for practical application in water treatment.

This article presents selected aspects of an interlaminar shear strength and failure analysis of hybrid fiber metal laminates (FMLs) consisting of alternating layers of a 2024-T3 aluminium alloy and carbon fiber reinforced polymer. Particular attention is paid to the properties of the hybrid FMLs with an additional interlayer of glass composite at the metal-composite interface. The influence of hygrothermal conditioning, the interlaminar shear strength (short beam shear test), and the failure mode were investigated and discussed. It was found that fiber metal laminates can be classified as a material with significantly less adsorption than in the case of conventional composites. Introducing an additional layer of glass composite at the metal-composite interface and hygrothermal conditioning influence the decrease in the interlaminar shear strength. The major forms of damage to the laminates are delaminations in the layer of the carbon composite, at the metal-composite interface, and delaminations between the layers of glass and carbon composites.

The purpose of the work was the effect of metal volume fraction of fiber metal laminates on damage after dynamic loads based upon the example of innovative hybrid titanium−carbon composite laminates. The subject of the study was metal−fiber hybrid titanium−carbon composite laminates. Four types of hybrid titanium−carbon laminates were designed with various metal volume fraction coefficient but constant thickness. Based on the results, it can be stated that changes in the metal volume fraction coefficient in the range of 0.375−0.6 in constant thickness titanium−carbon composite laminates do not significantly affect their resistance to impacts in the energy range of 5−45 J. It was concluded that there were no significant differences in maximum force values, total contact time, and damage range. Some tendency towards a reduction in the energy accumulation capacity was observed with an increase in thickness of the metal part in relation to the total thickness of the laminate, especially in the lower impact energy range. This can result in the lower bending stiffness of laminates with lower metal content and potential elastic strain of the composite part before the initiation of the fiber damage process.

The aim of the study was to assess the selected properties of a hybrid organic−inorganic silane sol−gel coating (HSG) used in hybrid fiber metal laminates (FML) in a corrosion environment. The HSG coating on the aluminum alloy was produced using 3M™ AC130-2 formulation consisting of 3-glycidoxypropyl-trimethoxysilane (GPTMS) and tetra-n-propoxyzirconium (zirconium(IV) propoxide) (TPOZ). Laminates consisted of aluminum alloy AA2024-T3 sheets, with carbon fiber reinforced polymers (CFRPs) and a glass fiber reinforced metal−composite structure (GFRP). Potentiodynamic and polarization curve and impedance (EIS) tests were carried out on HSG at ambient temperatures after 1 h and 150 h of soaking. Neutral 0.5 M NaCl and 0.8 M NaCl solutions were used for open circuit potential (OCP) and potentiodynamic tests, and 0.5 NaCl was used for the EIS test. A neutral salt spray (NSS) test was applied to laminates with a 12 week exposure period. The results obtained revealed that the HSG coating did not provide sufficient protection against corrosion of the aluminum alloy in direct contact with an aggressive environment but was effective as an interlayer. Local aluminum sheet perforation did not lead to delamination at the metal−composite interface regardless of the type or configuration of the composite. This confirms the durability of HSG used in FMLs.