Search

This article describes an experimental study aimed at investigating the potential use of recycled rubber granulate from waste tires of fractions 0/1 and 1/3 mm in cement composites as a 100% replacement for natural aggregates. The use of waste in the development and production of new building materials represents an important aspect for the sustainability and protection of the environment. This article is focused on the sound-absorbing and thermal-insulating properties of experimental cement composites based on recycled rubber from waste tires. The article describes the grain characteristics of recycled rubber, sound absorption capacity, thermal conductivity and strength characteristics. The results of this research show that the total replacement of natural aggregate with recycled rubber in cement composites is possible. Replacing natural aggregate with recycled rubber has significantly improved the thermal and acoustic properties of the prepared cement composites, however, at the same time; there was also the expected decrease in the strength characteristics due to the elasticity of rubber.

This paper presents the results of research dealing with the use of recycled waste sludge water from a concrete plant (CP) as partial or complete replacement of mixing water in cement mixtures. The need to recycle waste sludge water generated as a by-product (waste sludge water) during the production of fresh concrete in the concrete plant results from the environmental and economic problems associated with the operation of the concrete plant. Mixing water was replaced with recycled waste sludge water in the amount of 25%, 50%, 75%, and 100%. In order to determine the effect of partial or complete replacement of mixing water with waste sludge water from the concrete plant in the production of cement composites, laboratory tests of waste sludge water were carried out to determine whether the waste sludge water complies with the requirements for mixing water defined in CSN EN 1008. The tests also determined the properties of fresh cement mortar and hardened cement composites. These were tests of the beginning and end of cement mortar setting, and the strength characteristics (flexural strength, compressive strength). The results of these tests show that it is possible to replace the mixing water by waste sludge water from the concrete plant in the amount of up to 25% without significantly affecting the tested properties, in comparison with the formula containing pure mixing water.

This article presents the results of a study dealing with the utilization of sludge water from a concrete plant as a partial replacement for mixing water in the production of cement composites. The replacement of mixing water with sludge water from a concrete plant was carried out in the amounts of 20% and 50%. The following tests were carried out in order to determine the effect of the replacement of mixing water with sludge water from a concrete plant on the physical and mechanical properties of the cement composites: cement mortar consistency, beginning and end of setting, strength characteristics (compressive strength and flexural strength), and thermal properties. The measured values of the strength characteristics of the test specimens after 28 days of age confirm the possibility of replacing mixing water with sludge water from a concrete plant without significantly reducing the compressive and flexural strength.