Search

Background/Objectives: Alzheimer’s disease (AD) is an age-related degenerative brain disorder characterized by a progressive decline in cognitive function and memory. This study aimed to evaluate whether rutin hydrate (RH) has neuroprotective effects in an AD-like learning and memory impairment rat model induced by scopolamine (SCO). Methods: The rats were administered with RH (100 mg/kg) and SCO (1.5 mg/kg) and underwent behavioral tests, including the Morris water maze test, Y-maze test, and passive avoidance test, to evaluate their learning and memory abilities. Additionally, long-term potentiation (LTP) was induced to observe changes in the field excitatory postsynaptic potential (fEPSP) activity. Results: RH treatment attenuated the SCO-induced shortening of step-through latency in the passive avoidance (PA) test, increased the percentage of alternation in the Y-maze, and increased the time spent in the target zone in the Morris water maze (MWM). Moreover, RH increased the total activity of fEPSP following theta burst stimulation and attenuated the SCO-induced blockade of fEPSP. RH also ameliorated the SCO-induced decrease in the expression levels of the BDNF, TrkB, ERK, CREB, and Bcl-2 proteins and the increase in the Bax protein level in the rat hippocampus. This demonstrates that RH has beneficial neuroprotective effects in the brain, improving learning, memory, and synaptic plasticity in rats. Conclusions: Our results highlight the molecular and cellular mechanisms through which RH exerts its neuroprotective effects in the prevention and treatment of learning and memory deficit disorders. RH could potentially be used as a therapeutic strategy for the restoration of learning and memory function and the prevention of the progression of AD.

Functional vinegar with high γ-aminobutyric acid (GABA) content was manufactured through a two-stage serial co-fermentation of rice wine lees, a by-product of Korean rice wine, using lactic acid bacteria (LAB) and acetic acid bacteria (AAB). The first LAB fermentation elevated GABA content by utilizing monosodium glutamate (MSG) as a precursor. Lactiplantibacillus plantarum KS2020 converted up to 10% of MSG into GABA and indicated a GABA content of 65.49 mg/g. The concentration of LAB-fermented rice wine lees was then optimized for the second co-fermentation, and Acetobacter aceti was used to produce vinegar. Co-fermentation using 40% first LAB-fermented rice wine lees yielded vinegar with 55.34 mg/g acetic acid and 22.61 mg/g GABA. The temperature-dependent reduction in GABA in GABA-enriched vinegar followed the Arrhenius relationship during storage, with an activation energy of 9.94 kcal/mol (20–35 °C, R2 = 0.99). The GABA present in the vinegar showed evidence of a temperature-/time-dependent decrease, decreasing by 40% over five months. This study first proved the higher GABA-enriched vinegar production from rice wine lees using Lb. plantarum KS2020 and A. aceti.

Autosomal recessive spastic ataxia in Charlevoix-Saguenay (ARSACS) is a neurodegenerative disorder caused by mutations in the sacsin molecular chaperone protein (SACS) gene. Since the first report from Quebec in 1978, many pathogenic ARSACS variants with significantly reduced chaperone activities have been reported worldwide in adolescents, with presumably altered protein folding. In this study, a novel SACS mutation (p.Val1335IIe, Heterozygous) was identified in a Korean patient in their 50s with late-onset ARSACS characterized by cerebellar ataxia and spasticity without peripheral neuropathy. The mutation was confirmed via whole exome sequencing and Sanger sequencing and was predicted to likely cause disease using prediction software. RT-PCR and ELISA showed decreased SACS mRNA expression and sacsin protein concentrations in the proband, supporting its implications in diseases with pathogenicity and reduced chaperone function from haploinsufficiency. Our results revealed the pathogenicity of the SACS Val1335IIe mutation in the proband patient’s disease manifestation, even though the symptoms had a limited correlation with the typical ARSACS clinical triad, which could be due to the reduced chaperon function from haploinsufficiency. Furthermore, our study suggests that variants of SACS heterozygosity may have diverse symptoms, with a wide range of disease onsets for late-onset sacsinopathy.

This study aimed to evaluate the enhancement of A. gossypii control by A. colemani when Z. elegans was planted as a companion crop in cucumber greenhouses. The density and spatial distribution of A. gossypii and parasitized mummies were investigated across three treatment plots: (1) the simultaneous application of A. colemani and cultivation of Z. elegans (parasitoid-zinnia plot); (2) the application of A. colemani alone (parasitoid plot); and (3) a control plot (no application of both). A. gossypii maintained low densities in the parasitoid–zinnia plots, while its densities in the parasitoid plots initially decreased but rapidly increased thereafter. The spatial distribution patterns of A. gossypii and parasitized mummies showed similar trends across treatments. However, the parasitism rate of A. gossypii exhibited random distribution in parasitoid and control plots, while showing uniform distribution in the parasitoid–zinnia treatment. These results supported the idea that cultivating Z. elegans alongside cucumber could enhance the effectiveness of A. colemani as a biocontrol agent against A. gossypii, highlighting the importance of such companion planting in pest management strategies.

Waterborne polyurethane (WPU) often suffers from poor water resistance and mechanical properties due to hydrophilic emulsifiers. To address these issues, this study introduces glycidyl carbamate (GC) as a crosslinker to improve WPU performance. Three types of GC were synthesized using aliphatic, cycloaliphatic, and aromatic isocyanates, respectively. The crosslinked network was established through a reaction between the epoxide group of GC and the carboxylic acid and amine groups of WPU. Among these, the WPU film utilizing aromatic isocyanate-based GC exhibited the highest crosslink density, modulus, hardness, and water resistance, due to the rigidity of the aromatic molecular structure. However, the film displayed excessive brittleness, resulting in reduced tensile strength, along with yellowing typically associated with aromatic compounds. The WPU crosslinked with cycloaliphatic GC demonstrated the next best mechanical properties and water resistance, with a 2.7-fold increase in tensile strength, a 1.5-fold increase in hardness, and a 66% reduction in the water swelling ratio compared to neat WPU. This study presents a novel and effective strategy to enhance the water resistance and mechanical properties of WPU films, making them suitable for advanced coating applications.

The chirality of a chemical differentiates it from its mirror-image counterpart. This unique property has significant implications in chemistry, biology, and drug discovery, where chiral chemicals display high selectivity and activity in achieving target specificity and reducing attrition rates in drug development. Stress granules (SGs) are dynamic assemblies of proteins and RNA that form in the cytoplasm of cells under stress conditions. Modulating their formation or disassembly could offer a novel approach to treating a wide range of diseases. This has led to significant interest in SGs as potential therapeutic targets. This study examined the NTF2-like domain of G3BP1 as a possible target for SG modulation. Molecular docking was used to simulate the interactions of compounds with the domain, and a potential candidate with a chiral structure was identified. The experiments showed that the compound induced the formation of SG-like granules. Importantly, the ability of this compound to modulate SG offers valuable insights into a new mechanism underlying the dynamics and promoting the assembly of SGs, and this new mechanism, in turn, holds potential for the development of drugs with diverse mechanisms of action and potentially synergistic effects.

One of the major challenges in QLED research is improving the stability of the devices. In this study, we fabricated all inorganic quantum-dot light emitting diodes (QLEDs) using hafnium oxide (HfOx) as the hole transport layer (HTL), a material commonly used for insulator. Oxygen vacancies in HfOx create defect states below the Fermi level, providing a pathway for hole injection. The concentration of these oxygen vacancies can be controlled by the annealing temperature. We optimized the all-inorganic QLEDs with HfOx as the HTL by changing the annealing temperature. The optimized QLEDs with HfOx as the HTL showed a maximum luminance and current efficiency of 66,258 cd/m2 and 9.7 cd/A, respectively. The fabricated all-inorganic QLEDs exhibited remarkable stability, particularly when compared to devices using organic materials for the HTL. Under extended storage in ambient conditions, the all-inorganic device demonstrated a significantly enhanced operating lifetime (T50) of 5.5 h, which is 11 times longer than that of QLEDs using an organic HTL. These results indicate that the all-inorganic QLEDs structure, with ITO/MoO3/HfOx/QDs/ZnMgO/Al, exhibits superior stability compared to organic-inorganic hybrid QLEDs.

Heavy metals have serious negative effects on various aquatic organisms, and therefore rapid and accurate ecotoxicological assessments of heavy metals are necessary. Fish-derived cells sensitive to heavy metals have been used as valuable tools for ecotoxicological assessments. However, this method requires a minimum toxicity treatment time of 96 h, which limits its use when rapid ecotoxicological assessments are required or ecotoxicological assessments of a large number of toxicants are performed. In this study, these limitations were overcome by adjusting parameters including the concentration of fetal bovine serum (FBS) in the medium and the treatment time of the toxicant. Specifically, we found that the maximum time for fish cells to remain unstarved was 6 h when using a medium containing 1% FBS. We applied both parameters to the ecotoxicological assessment (using a medium containing 1% FBS for the toxicity assessment and treating the toxicant for only 6 h). Surprisingly, these adjusted parameters allowed us to obtain faster and more accurate data than the traditional assessment. This improvement was due to the new assessment conditions that minimized the possibility that the growth-inducing effects of nutrients present in excess in the medium could interfere with the cellular response to the toxicant. The accuracy of this assessment was not limited to measuring the toxicity of heavy metals. In conclusion, we have established an ecotoxicity assessment that can generate rapid and accurate data on heavy metals. This new platform will become the cornerstone of rapid and accurate ecotoxicity assessments of heavy metals.

Natural products with high antioxidant activity are considered as innovative prevention strategies to effectively prevent age-related macular degeneration (AMD) in the early stage because the generation of reactive oxygen species (ROS) leading to the development of drusen is reported as an important cause of this disease. To investigate the prevention effects of the methanol extracts of Euphorbia heterophylla L. (MEE) on AMD, its effects on the antioxidant activity, inflammatory response, apoptosis pathway, neovascularization, and retinal tissue degeneration were analyzed in N-retinylidene-N-retinylethanolamine (A2E)-landed spontaneously arising retinal pigment epithelia (ARPE)-19 cells and BALB/c mice after exposure to blue light (BL). The MEE contained 10 active components and showed high free radical scavenging activity against 2,2-diphenyl-1-picrylhydrazyl (DPPH), 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), and nitric oxide (NO) radicals. The pretreatments of high-dose MEE remarkably suppressed the production of intracellular ROS (88.2%) and NO (25.2%) and enhanced (SOD) activity (84%) and the phosphorylation of nuclear factor erythroid 2–related factor 2 (Nrf2) in A2E + BL-treated ARPE-19 cells compared to Vehicle-treated group. The activation of the inducible nitric oxide synthase (iNOS)-induced cyclooxygenase-2 (COX-2) mediated pathway, inflammasome activation, and expression of inflammatory cytokines was significantly inhibited in A2E + BL-treated ARPE-19 cells after the MEE pretreatment. The activation of the apoptosis pathway and increased expression of neovascular proteins (36% for matrix metalloproteinase (MMP)-9) were inhibited in the MEE pretreated groups compared to the Vehicle-treated group. Furthermore, the thickness of the whole retina (31%), outer nuclear layer (ONL), inner nuclear layer (INL), and photoreceptor layer (PL) were significantly increased by the MEE pretreatment of BALB/c mice with BL-induced retinal degeneration. Therefore, these results suggest that the MEE, with its high antioxidative activity, protects against BL-induced retinal degeneration through the regulation of the antioxidative system, inflammatory response, apoptosis, and neovascularization in the AMD mouse model.

Hemp seed protein (HSP), a by-product of hemp oil processing, was converted into a functional protein ingredient enriched with γ-aminobutyric acid (GABA) and peptides through a two-step microbial fermentation process. To enhance peptide and free amino acid production from HSP, it was hydrolyzed using alkaline protease produced by Bacillus subtilis HA. The HSP was hydrolyzed at a degree of 40% at 55 °C for 24 h, yielding a pH of 6.55, an acidity of 1.22%, and 205.45 mg% tyrosine equivalents. This process resulted in the production of low molecular-weight peptides. (Lb. plantarum KS2020. This serial co-fermentation process, combining proteolysis and lactic acid fermentation, not only increased the peptide content but also promoted GABA accumulation, positioning HSP hydrolysate as a promising candidate for functional foods with potential health benefits.

Complement component 3 (C3) deficiency has recently been reported as one of the novel causes of constipation. To identify a unique gene specific to constipation caused by C3 deficiency, the total RNA extracted from the mid colon of C3 knockout (C3 KO) mice was hybridized to oligonucleotide microarrays, and the function of the candidate gene was verified in in vitro and in vivo models. C3 KO mice used for microarrays showed definite phenotypes of constipation. Overall, compared to the wild type (WT), 1237 genes were upregulated, and 1292 genes were downregulated in the C3 KO mice. Of these, the major genes included were lysine (K)-specific demethylase 5D (KDM5D), olfactory receptor 870 (Olfr870), pancreatic lipase (PNLIP), and alkaline phosphatase intestinal (ALPI). Specifically, the ALPI gene was selected as a novel gene candidate based on alterations during loperamide (Lop)-induced constipation and intestinal bowel disease (IBD). The upregulation of ALPI expression treated with acetate recovered the expression level of mucin-related genes in primary epithelial cells of C3 KO mice as well as most phenotypes of constipation in C3 KO mice. These results indicate that ALPI plays an important role as the novel gene associated with C3 deficiency-induced constipation.

As cellular senescence, reactive oxygen species (ROS) accumulate excessively, causing cellular damage. Flavonoids derived from natural products are known for their antioxidant effects and their ability to delay cellular senescence. Previous studies have attempted to mitigate cellular senescence using flavonoids from natural sources. However, the detailed mechanisms and regulatory targets of some flavonoids exhibiting antioxidant effects have not been fully elucidated. Therefore, we screened a library of flavonoids for antioxidant properties. Isoschaftoside, a glycosidic flavonoid, significantly reduced ROS levels in senescent cells. It was found that mitochondrial function was restored, and dependence on glycolysis was reduced in senescent cells treated with isoschaftoside. Additionally, we identified that isoschaftoside suppresses ROS by reducing the expression of RAC2 and LINC00294 in senescent cells. Taken together, this study establishes a novel mechanism for ROS inhibition and the regulation of cellular senescence by isoschaftoside. Our findings contribute important insights to antioxidant and anti-senescence research.

Additive manufacturing (AM) is not necessarily a new process but an advanced method for manufacturing complex three-dimensional (3D) parts. Among the several advantages of AM are the affordable cost, capability of building objects with complex structures for small-batch production, and raw material versatility. There are several sub-categories of AM, among which is fused filament fabrication (FFF), also commonly known as fused deposition modeling (FDM). FFF has been one of the most widely used additive manufacturing techniques due to its cost-efficiency, simplicity, and widespread availability. The FFF process is mainly used to create 3D parts made of thermoplastic polymers, and complex physical phenomena such as melt flow, heat transfer, solidification, crystallization, etc. are involved in the FFF process. Different techniques have been developed and employed to analyze these phenomena, including experimental, analytical, numerical, and finite element analysis (FEA). This study specifically aims to provide a comprehensive review of the developed numerical models and simulation tools used to analyze melt flow behavior, heat transfer, crystallization and solidification kinetics, structural analysis, and the material characterization of polymeric components in the FFF process. The strengths and weaknesses of these numerical models are discussed, simplifications and assumptions are highlighted, and an outlook on future work in the numerical modeling and FE simulation of FFF is provided.

The effects of aging on the healing capacity of maxillofacial bone defects have not been studied. The aim of this study was to evaluate the effects of aging on the regeneration of round bony defects in the mandible. We created a round-shaped bony defect in the mandibular angle area in rats of different ages (2-[2 M], 10-[10 M], and 20-month-old [20 M]) and evaluated new bone regeneration in these groups. Changes in bone turnover markers such as alkaline phosphatase, procollagen type I N-terminal propeptide (PINP), cross-linked C-telopeptide of type I collagen, and tartrate-resistant acid phosphatase 5B (TRAP5b) were investigated. The bone volume/total volume and bone mineral density of the 20 M group were significantly higher than those of the 2 M group (p = 0.029, 0.019). A low level of the bone formation marker PINP was observed in the 20 M group, and a high level of the bone resorption marker TRAP5b was observed in the 10 M and 20 M groups. Micro-computed tomography (µ-CT) results showed that older rats had significantly higher bone formation than younger rats, with lower serum levels of PINP and higher levels of TRAP5b. The local environment of the old rat bone defects, surrounded by thickened bone, may have affected the results of our study. In conclusion, old rats showed greater new bone regeneration and healing capacity for round mandibular bone defects. This result was related to the fact that the bone defects in the 20 M rat group provided more favorable conditions for new bone regeneration.

As engine monitoring data has become more complex with an increasing number of sensors, fault prediction based on artificial intelligence (AI) has emerged. Existing fault prediction models using AI significantly improve the accuracy of predictions by effectively handling such complex data, but at the same time, the problem arises that the AI-based models cannot explain the rationale of their predictions to users. To address this issue, we propose a time-series explanatory fault prediction framework to provide an explainability even when using AI-based fault prediction models. It consists of a data feature reduction process, a fault prediction model training process using long short-term memory, and an interpretation process of the fault prediction model via an explainable AI method. In particular, the proposed framework can explain a fault prediction based on time-series data. Therefore, it indicates which part of the data was significant for the fault prediction not only in terms of sensor type but also in terms of time. Through extensive experiments, we evaluate the proposed framework using various fault data by comparing the prediction performance of fault prediction and by assessing how well the main pre-symptoms of the fault are extracted when predicting a fault.

Sarcopenia, the age-related decline in muscle mass and function, poses a significant health challenge as the global population ages. Mitochondrial dysfunction is a key factor in sarcopenia, as evidenced by the role of mitochondrial reactive oxygen species (mtROS) in mitochondrial biogenesis and dynamics, as well as mitophagy. Resistance exercise training (RET) is a well-established intervention for sarcopenia; however, its effects on the mitochondria in aging skeletal muscles remain unclear. This review aims to elucidate the relationship between mitochondrial dynamics and sarcopenia, with a specific focus on the implications of RET. Although aerobic exercise training (AET) has traditionally been viewed as more effective for mitochondrial enhancement, emerging evidence suggests that RET may also confer beneficial effects. Here, we highlight the potential of RET to modulate mtROS, drive mitochondrial biogenesis, optimize mitochondrial dynamics, and promote mitophagy in aging skeletal muscles. Understanding this interplay offers insights for combating sarcopenia and preserving skeletal muscle health in aging individuals.

In recent years, there has been increasing interest in exploring the potential therapeutic advantages of Citrullus mucosospermus extracts (CME) for nonalcoholic steatohepatitis (NASH). In this study, we investigated the therapeutic effects of CME on NASH using a mice model. High-performance liquid chromatography (HPLC) was employed to identify cucurbitacin E and cucurbitacin E-2-O-glucoside from the CME. Although CME did not significantly alter the serum lipid levels in methionine- and choline-deficient (MCD) mice, it demonstrated a protective effect against MCD diet-induced liver damage. CME reduced histological markers, reduced alanine transaminase (ALT) and aspartame transaminase (AST) levels, and modulated key NASH-related genes, including C/EBPα, PPARγ, Fas, and aP2. In addition, CME was found to restore hormone-sensitive lipase (HSL) and adipose triglyceride lipase (ATGL) activity, both crucial for fat catabolism, and reduced the levels of pro-inflammatory cytokines. Furthermore, CME demonstrated the potential to mitigate oxidative stress by maintaining or enhancing the activation and expression of nuclear factor erythroid 2-related factor 2 (Nrf2) and superoxide dismutase (SOD), both pivotal players in antioxidant defense mechanisms. These findings underscore the promising therapeutic potential of CME in ameliorating liver damage, inflammation, and oxidative stress associated with NASH.

Objectives: This study aimed to analyze the association between alcohol use disorder (AUD) and suicidal ideation (SI) in the general Korean population. Methods: The 2022 Mental Health Awareness Survey was collected from the Chungcheongnam-do Mental Health Welfare Center (CHMHC). Before Propensity Score Matching (PSM), 823 participants were included in this study. After 1:4 PSM, the 255 participants were analyzed using the chi-square test and matched conditional logistic regression. Results: The AUD group had higher odds of experiencing SI than the non-AUD (adjusted odds ratio [AOR]: 2.40, 95% confidence intervals [CI]: 1.10–5.22). Stratified matched conditional logistic regression showed that, among the female, Conclusions: Through this study, we found a strong association between the AUD group and SI. This association was particularly strong among female,

Actin, which plays a crucial role in cellular structure and function, interacts with various binding proteins, notably myosin. In mammals, actin is composed of six isoforms that exhibit high levels of sequence conservation and structural similarity overall. As a result, the selection of actin isoforms was considered unimportant in structural studies of their binding with myosin. However, recent high-resolution structural research discovered subtle structural differences in the N-terminus of actin isoforms, suggesting the possibility that each actin isoform may engage in specific interactions with myosin isoforms. In this study, we aimed to explore this possibility, particularly by understanding the influence of different actin isoforms on the interaction with myosin 7A. First, we compared the reported actomyosin structures utilizing the same type of actin isoforms as the high-resolution filamentous skeletal α-actin (3.5 Å) structure elucidated using cryo-EM. Through this comparison, we confirmed that the diversity of myosin isoforms leads to differences in interaction with the actin N-terminus, and that loop 2 of the myosin actin-binding sites directly interacts with the actin N-terminus. Subsequently, with the aid of multiple sequence alignment, we observed significant variations in the length of loop 2 across different myosin isoforms. We predicted that these length differences in loop 2 would likely result in structural variations that would affect the interaction with the actin N-terminus. For myosin 7A, loop 2 was found to be very short, and protein complex predictions using skeletal α-actin confirmed an interaction between loop 2 and the actin N-terminus. The prediction indicated that the positively charged residues present in loop 2 electrostatically interact with the acidic patch residues D24 and D25 of actin subdomain 1, whereas interaction with the actin N-terminus beyond this was not observed. Additionally, analyses of the actomyosin-7A prediction models generated using various actin isoforms consistently yielded the same results regardless of the type of actin isoform employed. The results of this study suggest that the subtle structural differences in the N-terminus of actin isoforms are unlikely to influence the binding structure with short loop 2 myosin 7A. Our findings are expected to provide a deeper understanding for future high-resolution structural binding studies of actin and myosin.

Methods and means of remote control of the ecological state of the atmosphere are constantly improving. Lidar sensing allows obtaining up-to-date information about natural and technogenic sources of atmospheric pollution. There is a wide range of problems in ecological control, where the deployment of an inexpensive mobile lidar network is required. For this purpose, it is suggested to use Q-switch and MOPA fiber lasers in lidars. Q-switch fiber lasers have a simpler design and are more practical to use. However, pulses from Q-switch lasers have long full-pulse durations. In the present work, a lidar signal inversion method (LSIM) is proposed for solving this problem. Verification and outdoor experimentation of the LSIM was carried out with the reference signal method (RSM). The advantage of the proposed RSM is the minimum number of controllable parameters necessary for LSIM verification and approbation. As a result, the accuracy of the obtained results increased. Thus, the possibility of application of the Q-switch fiber lasers for lidar sensing is shown both theoretically and experimentally.

Due to their high surface area and low weight, silica aerogels are ideally suited for several uses, including drug delivery, catalysis, and insulation. Oil–water–oil (OWO) double emulsion is a simple and regulated technique for encasing a volatile oil phase in a silica shell to produce hollow silica (SiO2) aerogel particles by using hydrophilic and hydrophobic emulsifiers. In this study, the oil–water–oil (OWO) double emulsion method was implemented to synthesize surface-modified hollow silica (SiO2) aerogel particles in a facile and effective way. This investigation mainly focused on the influence of the N-hexane-to-water glass (OW) ratio (r) in the first emulsion, silica (water glass) content concentration (x), and surfactant concentration (s) variations. Furthermore, surface modification techniques were utilized to customize the aerogel’s characteristics. The X-ray diffraction (XRD) patterns showed no imprints of impurities except SiO2. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images highlight the hollow microstructure of silica particles. Zeta potential was used to determine particle size analysis of hollow silica aerogel particles. The oil–water–oil (OWO) double emulsion approach was successfully employed to synthesize surface-modified hollow silica (SiO2) aerogel particles, providing precise control over the particle characteristics. By the influence of the optimization condition, this approach improves the aerogel’s potential applications in drug delivery, catalysis, and insulation by enabling surface modifications.

Small amounts of thermally conductive graphene oxide (GO) and modified GO are systematically introduced as a second filler to thermal interface materials (TIMs) consisting of alumina (Al2O3) particles and polydimethylsiloxane (PDMS). The surface of GO is covalently linked with an organic moiety, octadecylamine (ODA), to significantly improve the miscibility and dispersity of GO across the TIM matrix. Subsequently, two series of PDMS-Al2O3 composite TIMs are manufactured as a function of GO and ODA-GO content (0.25 wt%–2.5 wt%) to understand the effect of these second additives. The incorporation of GO into the Al2O3-PDMS composite materials generally increases the thermal conductivity (TC), ranging from 18% to 29%. Conversely, the use of ODA-GO further enhances the overall performance of TIMs (22–54%) by facilitating the dispersion degree of GO across the composite matrix. The great improvement in TC is presumably related to the formation of conductive pathways by uniformly integrating 2D-type GO flakes across spherical Al2O3 particle networks. The ability to simply regulate the polarity of the thermally conductive second filler can provide an idea for designing cost-effective and practical TIM-2-type pads that can be commercially applicable in between an integrated heat spreader and a heat sink.

This retrospective study aimed to evaluate the impact of radiation dose on the outcomes of stereotactic radiosurgery (SRS) for benign meningiomas and determine an optimal dosing strategy for balancing tumor control and treatment-related toxicity. Clinical data of 147 patients with 164 lesions treated between 2014 and 2022 were reviewed. Primary outcomes included progression-free survival (PFS), local control rate (LCR), and radiation-induced toxicity, with secondary outcomes focusing on LCR and radiation-induced peritumoral edema (PTE) in two dose groups (≥14 Gy and p = 0.628), while Group 2 (p = 0.039). This study concludes that SRS with a radiation dose < 14 Gy demonstrates comparable tumor control with reduced toxicity, advocating consideration of such dosing to achieve a balance between therapeutic efficacy and safety.

The devastating effects of COVID-19 have highlighted the importance of prophylactic and therapeutic strategies to combat respiratory diseases. Stimulator of interferon gene (STING) is an essential component of the host defense mechanisms against respiratory viral infections. Although the role of the cGAS/STING signaling axis in the innate immune response to DNA viruses has been thoroughly characterized, mounting evidence shows that it also plays a key role in the prevention of RNA virus infections. In this study, we investigated the role of STING activation during Influenza virus (IFV) infection. In both mouse bone marrow-derived macrophages and monocytic cell line THP-1 differentiated with PMA, we found that dimeric amidobenzimidazole (diABZI), a STING agonist, had substantial anti-IFV activity against multiple strains of IFV, including A/H1N1, A/H3N2, B/Yamagata, and B/Victoria. On the other hand, a pharmacological antagonist of STING (H-151) or the loss of STING in human macrophages leads to enhanced viral replication but suppressed IFN expression. Furthermore, diABZI was antiviral against IFV in primary air–liquid interface cultures of nasal epithelial cells. Our data suggest that STING agonists may serve as promising therapeutic antiviral agents to combat IFV.

As the use of stretchable electronic devices increases, the importance of flexible electromagnetic interference (EMI) shielding films is emerging. In this study, a highly flexible shielding film was fabricated using poly(styrene-co-butyl acrylate) (p(St-co-BA)) latex as a matrix and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) as a conductive filler, and then the mechanical properties and EMI shielding performance of the film were examined. Styrene and butyl acrylate were copolymerized to lower the high glass transition temperature and increase the ductility of brittle polystyrene. The latex blending technique was used to produce a shielding film in which the aqueous filler dispersion was uniformly dispersed in the emulsion polymerized resin. To determine the phase change in the copolymer matrix with temperature, the storage modulus was measured, and a time–temperature superposition master curve was constructed. The drying temperature of water-based copolymer resin suitable for film fabrication was set based on this curve. The glass transition temperature and flexibility of the blends were determined by evaluating the thermomechanical analysis and tensile tests. The EMI shielding effectiveness (SE) of the films was analyzed at frequencies from 50 MHz to 1.5 GHz, covering the VHF and UHF ranges. As the filler content increased, the SE of the blend film increased, but the elongation increased until a certain content and then decreased. The optimal content of PEDOT:PSS that satisfied both the ductility and shielding performance of the film was found to be 10 wt%. In this case, the elongation at break reached 300%, and the SE of a 1.6 mm thick film was about 35 dB. The film developed in this study can be used as an EMI shielding material that requires high flexibility.

This paper describes the development of an in-pipe inspection robot system designed for large-diameter water pipes. The robot is equipped with a Magnetic Flux Leakage (MFL) sensor module. The robot system is intended for pipes with diameters ranging from 900 mm to 1200 mm. The structure of the in-pipe inspection robot consists of the front and rear driving parts, with the inspection module located centrally. The robot is powered by 22 motors, including eight wheels with motors positioned at both the bottom and the top for propulsion. To ensure that the robot’s center aligns with that of the pipeline during operation, lifting units have been incorporated. The robot is equipped with cameras and LiDAR sensors at the front and rear to monitor the internal environment of the pipeline. Pipeline inspection is conducted using the MFL inspection modules, and the robot’s driving mechanism is designed to execute spiral maneuvers while maintaining contact with the pipeline surface during rotation. The in-pipe inspection robot is configured with wireless communication modules and batteries, allowing for wireless operation. Following its development, the inspection robot underwent driving experiments in actual pipelines to validate its performance. The field test bed used for these experiments is approximately 1 km in length. Results from the driving experiments on the field test bed confirmed the robot’s ability to navigate various curvatures and obstacles within the pipeline. It is posited that the use of the developed in-pipe inspection robot can reduce economic costs and enhance the safety of inspectors when examining aging pipes.

IR-783, a commercially available near-infrared (NIR) heptamethine cyanine dye, has been used for selective tumor imaging in breast, prostate, cervical, and brain cancers in vitro and in vivo. Although the molecular mechanism behind the structure-inherent tumor targeting of IR-783 has not been well-demonstrated, IR-783 has unique properties such as a good water solubility and low cytotoxicity compared with other commercial heptamethine cyanine dyes. The goal of this study is to evaluate the phototherapeutic efficacy of IR-783 as a tumor-targeted photothermal agent in human colorectal cancer xenografts. The results demonstrate that IR-783 shows both the subcellular localization in HT-29 cancer cells and preferential accumulation in HT-29 xenografted tumors 24 h after its intravenous administration. Furthermore, the IR-783 dye reveals the superior capability to convert NIR light into heat energy under 808 nm NIR laser irradiation in vitro and in vivo, thereby inducing cancer cell death. Taken together, these findings suggest that water-soluble anionic IR-783 can be used as a bifunctional phototherapeutic agent for the targeted imaging and photothermal therapy (PTT) of colorectal cancer. Therefore, this work provides a simple and effective approach to develop biocompatible, hydrophilic, and tumor-targetable PTT agents for targeted cancer phototherapy.

Background and objectives: Hepatocellular carcinoma (HCC) is one of the most common malignancies worldwide and is caused by multiple factors. To explore novel targets for HCC treatment, we comprehensively analyzed the expression of HomeoboxB13 (HOXB13) and its role in HCC. Materials and Methods: The clinical significance of HCC was investigated using open gene expression databases, such as TIMER, UALCAN, KM, OSlihc, and LinkedOmics, and immunohistochemistry analysis. We also analyzed cell invasion and migration in HCC cell lines transfected with HOXB13-siRNA and their association with MMP9, E2F1, and MEIS1. Results: HOXB13 expression was higher in fibrolamellar carcinoma than in other histological subtypes. Its expression was associated with lymph node metastasis, histological stage, and tumor grade. It was positively correlated with immune cell infiltration of B cells (R = 0.246), macrophages (R = 0.182), myeloid dendritic cells (R = 0.247), neutrophils (R = 0.117), and CD4+ T cells (R = 0.258) and negatively correlated with immune cell infiltration of CD8+ T cells (R = −0.107). A positive correlation was observed between HOXB13, MMP9 (R = 0.176), E2F1 (R = 0.241), and MEIS1 (R = 0.189) expression (p < 0.001). The expression level of HOXB13 was significantly downregulated in both HepG2 and PLC/PFR/5 cell lines transfected with HOXB13-siRNA compared to that in cells transfected with NC siRNA (p < 0.05). Additionally, HOXB13 significantly affected cell viability and wound healing. Conclusions: HOXB13 overexpression may lead to poor prognosis in patients with HCC. Additional in vivo studies are required to improve our understanding of the biological role and the exact mechanism of action of HOXB13 in HCC.

Wafer-scale blue micro-light-emitting diode (micro-LED) arrays were fabricated with a pixel size of 12 μm, a pixel pitch of 15 μm, and a pixel density of 1692 pixels per inch, achieved by optimizing the properties of e-beam-deposited and sputter-deposited indium tin oxide (ITO). Although the sputter-deposited ITO (S-ITO) films exhibited a densely packed morphology and lower resistivity compared to the e-beam-deposited ITO (E-ITO) films, the forward voltage (VF) values of a micro-LED with the S-ITO films were higher than those with the E-ITO films. The VF values for a single pixel and for four pixels with E-ITO films were 2.82 V and 2.83 V, respectively, while the corresponding values for S-ITO films were 3.50 V and 3.52 V. This was attributed to ion bombardment damage and nitrogen vacancies in the p-GaN layer. Surprisingly, the VF variations of a single pixel and of four pixels with the optimized E-ITO spreading layer from five different regions were only 0.09 V and 0.10 V, respectively. This extremely uniform VF variation is suitable for creating micro-LED displays to be used in AR and VR applications, circumventing the bottleneck in the development of long-lifespan and high-brightness organic LED devices for industrial mass production.

Tumor necrosis factor receptor-associated factor (TRAF) proteins play pivotal roles in a multitude of cellular signaling pathways, encompassing immune response, cell fate determination, development, and thrombosis. Their involvement in these processes hinges largely on their ability to interact directly with diverse receptors via the TRAF domain. Given the limited binding interface, understanding how specific TRAF domains engage with various receptors and how structurally similar binding interfaces of TRAF family members adapt their distinct binding partners has been the subject of extensive structural investigations over several decades. This review presents an in-depth exploration of the current insights into the structural and molecular diversity exhibited by the TRAF domain and TRAF-binding motifs across a range of receptors, with a specific focus on TRAF1.

The utilization of triboelectric materials has gained considerable attention in recent years, offering a sustainable approach to energy harvesting and sensing technologies. Biomass-derived materials, owing to their abundance, renewability, and biocompatibility, offer promising avenues for enhancing the performance and versatility of triboelectric devices. This paper explores the synthesis and characterization of biomass-derived materials, their integration into triboelectric nanogenerators (TENGs), and their applications in energy harvesting, self-powered sensors, and environmental monitoring. This review presents an overview of the emerging field of advanced triboelectric applications that utilize the unique properties of biomass-derived materials. Additionally, it addresses the challenges and opportunities in employing biomass-derived materials for triboelectric applications, emphasizing the potential for sustainable and eco-friendly energy solutions.

This study presents a comprehensive approach for simulating the additive manufacturing process of semi-crystalline composite polymers using Fused Deposition Modeling (FDM). By combining thermomechanical Finite Element Analysis (FEA) with experimental validation, our main objective is to comprehend and model the complex behaviors of 50 wt.% carbon fiber-reinforced Polyphenylene Sulfide (CF PPS) during FDM printing. The simulations of the FDM process encompass various theoretical aspects, including heat transfer, orthotropic thermal properties, thermal dissipation mechanisms, polymer crystallization, anisotropic viscoelasticity, and material shrinkage. We utilize Abaqus user subroutines such as UMATHT for thermal orthotropic constitutive behavior, UEPACTIVATIONVOL for progressive activation of elements, and ORIENT for material orientation. Mechanical behavior is characterized using a Maxwell model for viscoelastic materials, incorporating a dual non-isothermal crystallization kinetics model within the UMAT subroutine. Our approach is validated by comparing nodal temperature distributions obtained from both the Abaqus built-in AM Modeler and our user subroutines, showing close agreement and demonstrating the effectiveness of our simulation methods. Experimental verification further confirms the accuracy of our simulation techniques. The mechanical analysis investigates residual stresses and distortions, with particular emphasis on the critical transverse in-plane stress component. This study offers valuable insights into accurately simulating thermomechanical behaviors in additive manufacturing of composite polymers.

Copper-based nanomaterials have been employed as therapeutic agents for cancer therapy and diagnosis. Nevertheless, persistent challenges, such as cellular toxicity, non-uniform sizes, and low photothermal efficiency, often constrain their applications. In this study, we present Cu2+-loaded silica nanoparticles fabricated through the chelation of Cu2+ ions by silanol groups. The integration of Cu2+ ions into uniformly sized silica nanoparticles imparts a photothermal therapy effect. Additionally, the amine functionalization of the silica coating facilitates the chemical conjugation of tumor-specific fluorescence probes. These probes are strategically designed to remain in an ‘off’ state through the Förster resonance energy transfer mechanism until exposed to cysteine enzymes in cancer cells, inducing the recovery of their fluorescence. Consequently, our Cu2+-loaded silica nanoparticles demonstrate an efficient photothermal therapy effect and selectively enable cancer imaging.

Additive manufacturing (AM) also commonly known as 3D printing is an advanced technique for manufacturing complex three-dimensional (3D) parts by depositing raw material layer by layer. Various sub-categories of additive manufacturing exist including directed energy deposition (DED), powder bed fusion (PBF), and fused deposition modeling (FDM). FDM has gained widespread adoption as a popular method for manufacturing 3D parts, even for heavy-duty industrial applications. However, challenges remain, particularly regarding part quality. Print parameters such as print speed, nozzle temperature, and flow rate can significantly impact the final product’s quality. To address this, implementing a closed-loop quality control system is essential. This system consistently monitors part surface quality during printing and adjusts print parameters upon defect detection. In this study, we propose a simple yet effective image analysis-based closed-loop control system, utilizing serial communication and Python v3.12, a widely accessible software platform. The system’s accuracy and robustness are evaluated, demonstrating its effectiveness in ensuring FDM-printed part quality. Notably, this control system offers superior speed in restoring part quality to normal upon defect detection and is easily implementable on commercially available FDM 3D printers, fostering decentralized quality manufacturing.

Myosin, a superfamily of motor proteins, obtain the energy they require for movement from ATP hydrolysis to perform various functions by binding to actin filaments. Extensive studies have clarified the diverse functions performed by the different isoforms of myosin. However, the unavailability of resolved structures has made it difficult to understand the way in which their mechanochemical cycle and structural diversity give rise to distinct functional properties. With this study, we seek to further our understanding of the structural organization of the myosin 7A motor domain by modeling the tertiary structure of myosin 7A based on its primary sequence. Multiple sequence alignment and a comparison of the models of different myosin isoforms and myosin 7A not only enabled us to identify highly conserved nucleotide binding sites but also to predict actin binding sites. In addition, the actomyosin-7A complex was predicted from the protein–protein interaction model, from which the core interface sites of actin and the myosin 7A motor domain were defined. Finally, sequence alignment and the comparison of models were used to suggest the possibility of a pliant region existing between the converter domain and lever arm of myosin 7A. The results of this study provide insights into the structure of myosin 7A that could serve as a framework for higher resolution studies in future.

Many efforts have been made to develop near-infrared (NIR) fluorescent dyes with high efficiency for the NIR laser-induced phototherapy of cancer. However, the low tumor targetability and high nonspecific tissue uptake of NIR dyes in vivo limit their applications in preclinical cancer imaging and therapy. Among the various NIR dyes, squaraine (SQ) dyes are widely used due to their high molar extinction coefficient, intense fluorescence, and excellent photostability. Previously, benzoindole-derived SQ (BSQ) was prepared by incorporating carboxypentyl benzoindolium end groups into a classical SQ backbone, followed by conjugating with cyclic RGD peptides for tumor-targeted imaging. In this study, we demonstrate that the structure-inherent tumor-targeting BSQ not only shows a high fluorescence quantum yield in serum but also exhibits superior reactive oxygen species (ROS) generation capability under the 671 nm laser irradiation for effective photodynamic therapy (PDT) in vitro and in vivo. Without targeting ligands, the BSQ was preferentially accumulated in tumor tissue 24 h post-injection, which was the optimal timing of the laser irradiation to induce increments of ROS production. Therefore, this work provides a promising strategy for the development of photodynamic therapeutic SQ dyes for targeted cancer therapy.

Nanocrystalline cellulose (NCC) can be converted into carbon materials for the fabrication of lithium-ion batteries (LIBs) as well as serve as a substrate for the incorporation of transition metal oxides (TMOs) to restrain the volume expansion, one of the most significant challenges of TMO-based LIBs. To improve the electrochemical performance and enhance the longer cycling stability of LIBs, a nanocrystalline cellulose-supported iron oxide (Fe2O3) composite (denoted as NCC–Fe2O3) is synthesized and utilized as electrodes in LIBs. The obtained NCC–Fe2O3 electrode exhibited stable cycling performance, better capacity, and high-rate capacity, and delivered a specific discharge capacity of 576.70 mAh g−1 at 100 mA g−1 after 1000 cycles. Moreover, the NCC–Fe2O3 electrode was restored and showed an upward trend of capacity after working at high current densities, indicating the fabricated composite is a promising approach to designing next-generation high-energy density lithium-ion batteries.

Vacuum-assisted breast biopsy (VABB) has been replacing excisional biopsy in the treatment of benign breast lesions. Complete surgical excision is still needed for the lesions occasionally diagnosed with breast cancer after VABB. We aimed to characterize residual tumors after VABB and define a subset of patients who do not need surgical excision after VABB. From a retrospective database, we identified patients diagnosed with breast cancer after VABB guided with ultrasonography. Patients who underwent stereotactic biopsies were excluded. We reviewed clinicopathologic data and radiologic findings of the sample. We identified 48 patients with 49 lesions. After surgical excision, the residual tumors were identified in 40 (81.6%) lesions, and there was no residual tumor in nine (18.3%) patients. Imaging studies could not accurately locate residual tumors after VABB. A small tumor size on a VABB specimen was associated with no residual tumor on final pathology. However, residual tumors were identified in four (40%) of 10 lesions with a pathologic tumor size less than 0.5 cm. In conclusion, complete surgical excision remains the primary option for most of the patients diagnosed with breast cancer after VABB. Imaging surveillance without surgery should be carefully applied for selected low-risk patients.

Visible light photodetectors are extensively researched with transparent metal oxide holes/electron layers for various applications. Among the metal oxide transporting layers, nickel oxide (NiO) and zinc oxide (ZnO) are commonly adopted due to their wide band gap and high transparency. The objective of this study was to improve the visible light detection of NiO/ZnO photodiodes by introducing an additional quantum dot (QD) layer between the NiO and ZnO layers. Utilizing the unique property of QDs, we could select different sizes of QDs and responsive light wavelength ranges. The resulting red QDs utilized device that could detect light starting at 635 nm to UV (Ultra-violet) light wavelength and exhibited a photoresponsivity and external quantum efficiency (EQE) of 14.99 mA/W and 2.92% under 635 nm wavelength light illumination, respectively. Additionally, the green QDs, which utilized a device that could detect light starting at 520 nm, demonstrated photoresponsivity values of 8.34 mA/W and an EQE of 1.99% under 520 nm wavelength light illumination, respectively. In addition, we used X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS) to investigate the origin of the photocurrents and the enhancement of the device’s performance. This study suggests that incorporating QDs with metal oxide semiconductors is an effective approach for detecting visible light wavelengths in transparent optoelectronic devices.

A spirometer is a medical device frequently used clinically for the diagnosis and prediction of lung disease. This study aimed to investigate the clinical usefulness of a hand-held spirometer (The Spirokit), compared with conventional spirometry in patients with chronic obstructive pulmonary disease (COPD). This study was conducted from February 2022 to October 2022. Measurements from 80 patients with COPD (male: 53, female: 27) were obtained using The Spirokit and PC-based pulmonary function test equipment, and the resulting values were compared and analyzed. For the concurrent validity comparison of The Spirokit, the intra-class correlation (ICC 2, 1), coefficients of variation (CVME), 95% limits of agreement (95% LOA), and Cohen’s Kappa Index were analyzed. The Spirokit showed high agreement (ICC: 0.929–0.989; 95% LOA: −0.525 to 2.559; and CVME: 0.05–0.08) with the PC-based pulmonary function tester. Using the Cohen’s kappa coefficients, the device showed high sensitivity, specificity, and accuracy scores of Pa: 0.90, Pc: 0.52, and K: 0.79, respectively, indicating considerable agreement. The Spirokit, a portable pulmonary function test device, is a piece of equipment with high validity and portability, with high potential for replacing PC-based pulmonary function test equipment.

Severe volumetric expansion (~400%) limits practical application of silicon nanoparticles as anode materials for next-generation lithium-ion batteries (LIBs). Here, we describe the fabrication and characterization of a conformal polydopamine carbon shell encapsulating rattle-type silica@silicon nanoparticles (PDA–PEI@PVP–SiO2@Si) with a tunable void structure using a dual template strategy with TEOS and (3-aminopropyl)triethoxysilane (APTES) pretreated with polyvinylpyrrolidone (PVP K30) as SiO2 sacrificial template via a modified Stöber process. Polyethylene imine (PEI) crosslinking facilitated the construction of an interconnected three-dimensional bubble wrap-like carbon matrix structure through hydrothermal treatment, pyrolysis, and subsequent surface-protected etching. The composite anode material delivered satisfactory capacities of 539 mAh g−1 after 100 cycles at 0.1 A g−1, 512.76 mAh g−1 after 200 cycles at 1 A g−1, and 453 mAh g−1 rate performance at 5 A g−1, respectively. The electrochemical performance of PDA–PEI@PVP–SiO2@Si was attributed to the rattle-type structure providing void space for Si volume expansion, PVP K30-pretreated APTES/TEOS SiO2 seeds via catalyst-free, hydrothermal-assisted Stöber protecting Si/C spheres upon etching, carbon coating strategy increasing Si conductivity while stabilizing the solid electrolyte interface (SEI), and PEI carbon crosslinks providing continuous conductive pathways across the electrode structure. The present work describes a promising strategy to synthesize tunable yolk shell C@void@Si composite anode materials for high power/energy-density LIBs applications.

Hypoxia-induced neuronal death is a major cause of neurodegenerative diseases. Pyroptosis is a type of inflammatory programmed cell death mediated by elevated intracellular levels of reactive oxygen species (ROS). Therefore, we hypothesized that hypoxia-induced ROS may trigger pyroptosis via caspase-dependent gasdermin (GSDM) activation in neuronal cells. To test this, we exposed SH-SY5Y neuronal cells to cobalt chloride (CoCl2) to trigger hypoxia and then evaluated the cellular and molecular responses to hypoxic conditions. Our data revealed that CoCl2 induced cell growth inhibition and the expression of hypoxia-inducible factor-1α in SH-SY5Y cells. Exposure to CoCl2 elicits excessive accumulation of cytosolic and mitochondrial ROS in SH-SY5Y cells. CoCl2-induced hypoxia not only activated the intrinsic (caspases-3, -7, and -9) apoptotic pathway but also induced caspase-3/GSDME-dependent and NLRP3/caspase-1/GSDMD-mediated pyroptosis in SH-SY5Y cells. Importantly, inhibition of caspase-3 and -1 using selective inhibitors ameliorated pyroptotic cell death and downregulated GSDM protein expression. Additionally, treatment with a ROS scavenger significantly suppressed caspase- and pyroptosis-related proteins in CoCl2-treated SH-SY5Y cells. Our findings indicate that hypoxia-mediated ROS production plays an important role in the activation of both apoptosis and pyroptosis in SH-SY5Y neuronal cells, thus providing a potential therapeutic strategy for hypoxia-related neurological diseases.

Most anesthetics reduce cardiac functions and lower blood pressure (BP), potentially causing excessive BP reduction in dehydrated patients or those with heart conditions, such as coronary artery disease (CAD). Considering the increased prevalence of cardiovascular disease with age, anesthesiologists must be cautious about BP reduction during general anesthesia in older adults. In the present case, a 76-year-old male patient with undiagnosed CAD in a hypovolemic state experienced a significant drop in systolic BP to the fifties during propofol and sevoflurane anesthesia. Despite the use of vasopressors, excessive hypotension persisted, leading to anesthesia suspension. Subsequent cardiac examinations, including computed tomography heart angio and calcium score, and coronary angiogram, revealed a near total occlusion of the proximal left anterior descending coronary artery (pLAD) and the formation of collateral circulation. After 5 days of hydration and anticoagulation medications and confirmation of normovolemic state, general anesthesia was attempted again and successfully induced; a normal BP was maintained throughout the surgery. Thus, it is important to conduct a thorough cardiac evaluation and maintain normovolemia for general anesthesia in older adults.

This study investigates the effects of laser deposition and laser rescanning (LR) on the microstructure and mechanical properties of high-manganese steel (HMnS) deposited by laser-directed energy deposition (L-DED) comprising 24 wt.% Mn. Four types of laser deposition and LR strategies were investigated: unidirectional L-DED scanning without laser rescanning, L-DED scanning with 90° alterations in the laser scanning path on each layer without laser rescanning, unidirectional L-DED with laser rescanning in the same direction, and L-DED with laser rescanning with 90° alterations in the laser scanning path. The L-DED-processed HMnS had only a few small pores and exhibited a microstructure without any serious defects such as cracks. Additionally, a strong fibrous texture along the /building direction of the fully austenite phase was found. The mechanical properties (microhardness and tensile strength) of HMnS were improved by the LR with a grain refinement effect and fine solidification cell size due to the significantly faster solidification rate in LR than that in L-DED.

The combination of aztreonam (ATM) and ceftazidime–avibactam (CAZ-AVI; CZA) has shown therapeutic potential against serine-β-lactamase (SBL)- and metallo-β-lactamase (MBL)-producing Enterobacterales. However, the ability of CZA to restore the antibiotic activity of ATM is severely limited in MBL-producing multidrug-resistant (MDR) Pseudomonas aeruginosa strains because of the myriad of intrinsic and acquired resistance mechanisms associated with this pathogen. We reasoned that the simultaneous inhibition of multiple targets associated with multidrug resistance mechanisms may potentiate the antibiotic activity of ATM against MBL-producing P. aeruginosa. During a search for the multitarget inhibitors through a molecular docking study, we discovered that di-F-Q, the previously reported efflux pump inhibitor of MDR P. aeruginosa, binds to the active sites of the efflux pump (MexB), as well as various β-lactamases, and these sites are open to the 3-O-position of di-F-Q. The 3-O-substituted di-F-Q derivatives were thus synthesized and showed hereto unknown multitarget MDR inhibitory activity against various ATM-hydrolyzing β-lactamases (AmpC, KPC, and New Delhi metallo-β-lactamase (NDM)) and the efflux pump of P. aeruginosa, presumably by forming additional hydrophobic contacts with the targets. The multitarget MDR inhibitor 27 effectively potentiated the antimicrobial activity of ATM and reduced the MIC of ATM more than four-fold in 19 out of 21 MBL-producing P. aeruginosa clinical strains, including the NDM-producing strains which were highly resistant to various combinations of ATM with β-lactamase inhibitors and/or efflux pump inhibitors. Our findings suggest that the simultaneous inhibition of multiple MDR targets might provide new avenues for the discovery of safe and efficient MDR reversal agents which can be used in combination with ATM against MBL-producing MDR P. aeruginosa.

The depletion of reliable energy sources and the environmental and climatic repercussions of polluting energy sources have become global challenges. Hence, many countries have adopted various renewable energy sources including hydrogen. Hydrogen is a future energy carrier in the global energy system and has the potential to produce zero carbon emissions. For the non-fossil energy sources, hydrogen and electricity are considered the dominant energy carriers for providing end-user services, because they can satisfy most of the consumer requirements. Hence, the development of both hydrogen production and storage is necessary to meet the standards of a “hydrogen economy”. The physical and chemical absorption of hydrogen in solid storage materials is a promising hydrogen storage method because of the high storage and transportation performance. In this paper, physical hydrogen storage materials such as hollow spheres, carbon-based materials, zeolites, and metal–organic frameworks are reviewed. We summarize and discuss the properties, hydrogen storage densities at different temperatures and pressures, and the fabrication and modification methods of these materials. The challenges associated with these physical hydrogen storage materials are also discussed.

In this study, we demonstrated the effective separation of charge carriers within the IGZO/IZO heterostructure by incorporating IZO. We have chosen IGZO for its high mobility and excellent on–off switching behavior in the front channel of our oxide–oxide heterostructure. Similarly, for an additional oxide layer, we have selected IZO due to its outstanding electrical properties. The optimized optoelectronic characteristics of the IGZO/IZO phototransistors were identified by adjusting the ratio of In:Zn in the IZO layer. As a result, the most remarkable traits were observed at the ratio of In:Zn = 8:2. Compared to the IGZO single-layer phototransistor, the IGZO/IZO(8:2) phototransistor showed improved photoresponse characteristics, with photosensitivity and photoresponsivity values of 1.00 × 107 and 89.1 AW−1, respectively, under visible light wavelength illumination. Moreover, the electrical characteristics of the IGZO/IZO(8:2) transistor, such as field effect mobility (μsat) and current on/off ratio (Ion/Ioff), were highly enhanced compared to the IGZO transistor. The μsat and Ion/Ioff were increased by about 2.1 times and 2.3 times, respectively, compared to the IGZO transistor. This work provides an approach for fabricating visible-light phototransistors with elevated optoelectronic properties and low power consumption based on an oxide–oxide heterostructure. The phototransistor with improved performance can be applied to applications such as color-selective visible-light image sensors and biometric sensors interacting with human–machine interfaces.

Currently, pest control work using speed sprayers results in increasing numbers of safety accidents such as worker pesticide poisoning and rollover of vehicles during work. To address this, there is growing interest in autonomous driving technology for speed sprayers. To commercialize and rapidly expand the use of self-driving speed sprayers, an economically efficient self-driving speed sprayer using a minimum number of sensors is essential. This study developed an orchard passage map using location data acquired from positioning sensors to generate autonomous driving paths, without installing additional sensors. The method for creating the orchard passage map presented in this study was to create paths using location data obtained by manually driving the speed sprayer and merging them. In addition, to apply the orchard passage map when operating autonomously, a method is introduced for generating an autonomous driving path for the work start point movement path, work path, and return point movement path.

Grease, a type of lubricant, finds applications in various mechanical components due to advantages such as shape stability and sealing. However, grease is classified as a non-Newtonian fluid, and its film formation behavior is not fully understood to date due to variations in the mechanism related to the film formation behavior of grease based on factors like the base oil, bleed oil, thickener, and additives. In this study, the film formation behavior of fluorine-based grease was analyzed through the 3D profile of the grease after a friction test. In particular, the film formation behavior of the grease during sliding motion was analyzed. The experimental equipment used was a reciprocating-motion-type experimental equipment. Variations in the 3D profile were observed based on the speed and the cycle, indicating differences in the film formation behavior corresponding to changes in viscosity. In contrast to numerous studies that have observed the film formation behavior of grease under rolling motion, investigating the film formation behavior during the initial cycles of sliding motion will provide a profound understanding of the grease’s film formation process.

The macroscopic and microscopic anatomical characteristics of wood impact its utilization. This study investigated and compared the anatomical characteristics of six Korean oak wood species: Quercus variabilis, Quercus serrata, Quercus mongolica, Quercus dentata, Quercus aliena, and Quercus acutissima. Microscopic anatomical characteristics were evaluated according to the International Association of Wood Anatomists’ list for hardwood identification. Q. variabilis had a corky bark texture, with a color similar to that of Q. serrata. Flat ridges and shallow-fissured barks were observed in Q. serrata and Q. mongolica. The heartwood color was darker than that of sapwood in all species, with color variations. Q. variabilis had heartwood–sapwood colors similar to those of Q. acutissima, while Q. mongolica and Q. aliena presented similar heartwood–sapwood colors. Concerning microscopic features, Q. variabilis and Q. acutissima exhibited similar latewood vessel arrangements, featuring diagonal and/or radial patterns. In contrast, dendritic-to-diagonal patterns of vessels with angular outlines were observed in Q. serrata, Q. mongolica, Q. dentata, and Q. aliena. Additionally, Q. variabilis and Q. acutissima had vasicentric, confluent, and unilateral paratracheal axial parenchyma in the latewood. In summary, bark morphology, bark color, wood color, and latewood vessel characteristics can be used as identification keys for Korean oak species.