Search

A new analytical solution for the thermal-hydraulic coupling process is derived with a 1-D steady state conductive heat flow in the body of hot rock with perpendicular water flow in the single fracture and transient heat transfer from rock to water. The heat produced from the hot rock via water flow in the idealized single fracture is demonstrated by arithmetic equations. The applicability of the analytical solution is verified by numerical calculations and is limited to conditions with fast water flow rates or high water flux and long fluid pathways. The lifetime of an EGS reservoir in these reference conditions is 23.2 years and is confined by the produced water temperature of 150 °C for commercial utilization. The heat recovery factor is 12.4%. With a power plant capacity of 5 Mw installed, the total area for extracting recoverable heat within the projected lifetime of a fracture surface of 1.58 × 106 m2 was determined. The total mass flow rate of water injected into the large fracture was 57 kg/s. The discussion shows the ability of the model to estimate heat production and reservoir scale.

The beginning of 2022 was a time of major changes in the perception of energy availability and security in European countries. The aggression of Russia against Ukraine destabilizing the European energy economy, combined with the withdrawal from fossil fuels which has been going on for a dozen years, has strengthened activities to introduce new energy technologies based on renewable energy sources. One of the most promising and stable sources of renewable energy is geothermal energy, in particular enhanced geothermal systems (EGS) in hot dry rocks (HDR). These deposits occur at a great depth in almost every place on Earth, but due to their low permeability, they require hydraulic fracturing, which results in high investment costs. This technology has been developed for several decades. The current situation in Europe seems to confirm that its rapid development to a level that guarantees stable and profitable operation is crucial. This is of particular importance in the case of former member states of the economic zone of the Council for Mutual Economic Assistance, which until recently were heavily dependent on Russian energy. This review, based on the latest available data, covers potential HDR prospective areas in the countries of the south-eastern Baltic basin, including Lithuania, Latvia, Estonia and Poland. It is specific to this region that the original heat flux density is lower as a result of the paleoclimatic effect associated with the youngest ice age; however, thermal conditions do not deviate too much compared to western Europe, especially Rhine Graben, and significantly exceed the conditions of Finland, where an EGS project is currently being operated. In Lithuania, the most prospective area is the ZNI intrusion (south of Klaipeda), characterized by a geothermal gradient of up to 40 °C/1000 m. In addition, the Precambrian batholith south of Liepāja (Latvia) and the Rapakivi granites in the north and center of Estonia are promising EGS sites. Poland has relatively the most explored EGS potential, in both volcanic, crystalline and sedimentary rocks, especially in the area of the Szczecin Trough, Gorzów Block, Moglino-Łódź Trough and Karkonosze Mountains. Unfortunately, local tectonic conditions, in particular the development of faults and natural fracture zones that affect the directions of fracture propagation during hydraulic fracturing, have not been sufficiently recognized, which is one of the main barriers to the expansion of EGS pilot projects in these countries. These issues present challenges for the researchers, especially in terms of petrophysical analyses of rocks in target zones and local stress conditions, which have a key impact on fracturing operations and profitability of the systems. Despite high investment costs on the one hand and a significant slowdown in the global economy in 2022 on the other, it remains hopeful that the authorities of individual countries will decide to accelerate research work, leading to the implementation of pilot projects of EGS installations, and that this technology will be further improved to ensure a stable clean energy supply.

Hot dry rock (HDR) geothermal energy, as a clean and renewable energy, has potential value in meeting the rapid demand of the social economy. Predicting the temperature distribution of a subsurface target zone is a fundamental issue for the exploration and evaluation of hot dry rock. Numerical finite–element simulation is currently the mainstream method used to study the variation in underground temperature fields. However, it has difficulty in dealing with multiple geological elements of deep and complex hot dry rock models. A Unity networking for hot dry rock temperature (HDRT–UNet) is proposed in this study that incorporates the matrix rock temperature field equation for relating the three parameters of density, specific heat capacity and thermal conductivity. According to the numerical geological structures and rock parameters of cap rocks, faults and magma intrusions, a new dataset simulated by the finite element method was created for training the HDRT–UNet. The temperature simulation results in the Gonghe basin show that the predicted temperatures within faults and granites were higher than their surrounding rocks, while a lower thermal conductivity of the cap rocks caused the temperature of overlying strata to be smaller than their surrounding temperature field. The simulation results also prove that our proposed HDRT–UNet can provide a certain evolutionary knowledge for the prediction and development of geothermal reserves.

The paper describes application of the cross-impact method in the process of selecting locations and technologies used in a geothermal system based on energy accumulated in a dry rock formation, where CO2 is used as the working medium. The survey is based on the opinion of a group of 20 experts representing different fields of earth and technical sciences. They represent Norway and Poland, where the location of such a system is considered. Based on experts’ experience and opinions, all factors that seem to be significant were classified into the following groups: targets, key factors, results, determiners, motor and brakes, regulating factors, external factors, auxiliary factors, and autonomous factors. Direct influences between variables were indicated. Due to major differences in geological conditions in Poland and Norway, the factor of on- or offshore technology was pointed out as the primary determiner. Among key factors, the system operation’s long-term safety and level of technological readiness were indicated. As a target factor, an interest of local authority was pointed out. Among the variables that are important when selecting locations for this type of system, nine are essential: (1) Formal constraints related to local nature protection areas—this variable is essential in the case of an onshore system; (2) Availability of CO2 sources; (3) Level of geological recognition; (4) The distance of the CO2-EGS from a thermal energy user and electricity grid; (5) Existing wells and other infrastructure; (6) Depth of the EGS system; (7) Water depth if offshore, this variable is only important when offshore systems are involved; (8) Physical parameters of reservoir rocks; (9) Reservoir temperature.