Search

SnTe has emerged as a non-toxic and environmentally friendly alternative to the high-performance thermoelectric material PbTe, attracting significant interest in sustainable energy applications. In our previous work, we successfully synthesized high-quality SnTe with reduced thermal conductivity under high-pressure conditions. Building on this, in this work, we introduced indium (In) doping to further decrease thermal conductivity under high pressure. By incorporating resonance doping into the SnTe matrix, we aimed to enhance the electrical transport properties while maintaining low thermal conductivity. This approach enhances the Seebeck coefficient to an impressive 153 μVK−1 at 735 K, marking a notable enhancement compared to undoped SnTe. Furthermore, we noted a substantial decrease in total thermal conductivity, dropping from 6.91 to 3.88 Wm−1K−1 at 325 K, primarily due to the reduction in electrical conductivity. The synergistic impact of decreased thermal conductivity and heightened Seebeck coefficient resulted in a notable improvement in the thermoelectric figure of merit (ZT) and average ZT, achieving approximately 0.5 and 0.22 in the doped samples, respectively. These advancements establish Sn1−xInxTe as a promising candidate to replace PbTe in thermoelectric applications, providing a safer and more environmentally sustainable option.

Background: This study aims to evaluate the overall and breast cancer-specific survival (BCSS) after breast-conserving surgery (BCS) plus radiotherapy (RT) compared with mastectomy plus RT in resectable breast cancer. Moreover, the aim is to also identify the subgroups who benefit from BCS plus RT and establish a predictive nomogram for stage II patients. Methods: Stage I–III breast cancer patients were identified from the Surveillance, Epidemiology, and End Results (SEER) database between 1990 and 2016. Patients with available clinical information were split into two groups: BCS plus RT and mastectomy plus RT. Kaplan–Meier survival analysis, univariate and multivariate regression analysis, and propensity score matching were used in the study. Hazard ratio (HR) was calculated based on stratified Cox univariate regression analyses. A prognostic nomogram by multivariable Cox regression model was developed for stage II patients, and consistency index (C-index) and calibration curve were used to evaluate the accuracy of the nomogram in the training and validation set. Results: A total of 24,590 eligible patients were enrolled. The difference in overall survival (OS) and BCSS remained significant in stage II patients both before and after PSM (after PSM: OS: HR = 0.8536, p = 0.0115; BCSS: HR = 0.7803, p = 0.0013). In stage II patients, the survival advantage effect of BCS plus RT on OS and BCSS was observed in the following subgroups: any age, smaller tumor size (Conclusions: BCS plus RT significantly improved the survival rates for patients of stage IIA (T2N0, T0–1N1), ER (+). For stage II patients, the nomogram was a good predictor of 5-, 10-, and 15-year BCSS. Our study may help guide treatment decisions and prolong the survival of stage II breast cancer patients.

Maintaining the stability of the surrounding rock is an important prerequisite in ensuring the safe and efficient construction of underground mines—in particular, the surrounding rock of the cross-layer roadway, which is a combination of different media with different lithologies. Numerical models were established to investigate the effects of the different lateral pressure coefficients (λ), the angle (α) between the roadway and the maximum horizontal principal stress, and typical lithological combinations on the deformation of the surrounding rock of weakly cemented roadways. The main outcomes obtained from our research indicated the following: (1) under the action of tectonic stress, the focus should be on strengthening the roof of the roadway support of the slab, which is conducive to the stability of the surrounding rock; (2) roadway deformation and failure for the cases λ < 1.5 are approximately symmetrically distributed, whereas those for the cases λ > 1.5 are asymmetric; (3) roadway deformation and failure for the cases α < 45° are approximately symmetrically distributed, whereas those for the cases α > 45° are asymmetric; (4) tectonic stress has an important influence on stress redistribution, deformability, and damage in cross-layer roadways; and (5) when excavating cross-layer roadways under the action of tectonic stress, the concentrated stress around the end of the working face (especially the bottom corner) should be reduced. The research results provide insights for the roadway layout through coal seam and cross-layer excavation and deepen the understanding of the deformation mechanism of weakly cemented cross-layer roadway under tectonic stress.

Application of modern delivery techniques to natural bioactive products improves their permeability, bioavailability, and therapeutic efficacy. Many natural products have desirable biological properties applicable to wound healing but are limited by their inability to cross the stratum corneum to access the wound. Over the past two decades, modern systems such as microneedles, lipid-based vesicles, hydrogels, composite dressings, and responsive formulations have been applied to natural products such as curcumin or aloe vera to improve their delivery and efficacy. This article reviews which natural products and techniques have been formulated together in the past two decades and the success of these applications for wound healing. Many cultures prefer natural-product-based traditional therapies which are often cheaper and more available than their synthetic counterparts. Improving natural products’ effect can provide novel wound-healing therapies for those who trust traditional compounds over synthetic drugs to reduce medical inequalities.

In this paper, a fluorescence resonance energy transfer (FRET)-based sensor for ultra-sensitive detection of H2O2 was developed by utilizing the unique enzymatic properties of peroxiredoxin (Prx) to H2O2. Cyan and yellow fluorescent protein (CFP and YFP) were fused to Prx and mutant thioredoxin (mTrx), respectively. In the presence of H2O2, Prx was oxidized into covalent homodimer through disulfide bonds, which were further reduced by mTrx to form a stable mixed disulfide bond intermediate between CFP-Prx and mTrx-YFP, inducing FRET. A linear quantification range of 10–320 nM was obtained according to the applied protein concentrations and the detection limit (LOD) was determined to be as low as 4 nM. By the assistance of glucose oxidase to transform glucose into H2O2, the CFP-Prx/mTrx-YFP system (CPmTY) was further exploited for the detection of glucose in real sample with good performance, suggesting this CPmTY protein sensor is highly practical.

Terrestrial net primary productivity (NPP) plays an essential role in the global carbon cycle as well as for climate change. However, in the past three decades, terrestrial ecosystems across mainland China suffered from frequent drought and, to date, the adverse impacts on NPP remain uncertain. This study explored the spatiotemporal features of NPP and discussed the influences of drought on NPP across mainland China from 1982 to 2015 using the Carnegie Ames Stanford Application (CASA) model and the standardized precipitation evapotranspiration index (SPEI). The obtained results indicate that: (1) The total annual NPP across mainland China showed an non-significantly increasing trend from 1982 to 2015, with annual increase of 0.025 Pg C; the spring NPP exhibited a significant increasing trend (0.031 Pg C year−1, p < 0.05) while the summer NPP showed a higher decreasing trend (0.019 Pg C year−1). (2) Most areas of mainland China were spatially dominated by a positive correlation between annual NPP and SPEI and a significant positive correlation was mainly observed for Northern China; specific to the nine sub-regions, annual NPP and SPEI shared similar temporal patterns with a significant positive relation in Northeastern China, Huang-Huai-Hai, Inner Mongolia, and the Gan-Xin Region. (3) During the five typical drought events, more than 23% areas of mainland China experienced drought ravage; the drought events generally caused about 30% of the NPP reduction in most of the sub-regions while the NPP in the Qinghai-Tibet Plateau Region generally decreased by about 10%.

For H2 separation by Pd-based composite membranes, the pore mouth size distribution of the porous support immediately affects the quality of the deposited layer, including continuity and defect/pinhole formation. However, there is a lack of convenient and effective methods for characterization of pore mouth size of porous supports as well as of defect distribution of dense Pd-based composite membranes. Here we introduce a novel method by modifying conventional liquid–liquid displacement porometry. When the pore tunnels are filled with Liquid B and the outer surface is occupied by Liquid A, the reopening of the pore mouth depends on the pressure of Liquid B and the interfacial tension at the position of the pore mouth, from which the pore mouth size can be determined according to the Young–Laplace equation. Our experimental tests using this method with model samples show promising results, which are well supported by those obtained using FESEM (fild emission scanning electron microscope), AFM (atomic force microscope), and conventional liquid–liquid displacement porometry. This novel method can provide useful information for not only surface coatings on porous substrates but also for modification of dense membrane defects; thus, broad utilizations of this technique can be expected in future study.

Low-molecular-weight (LMW, wa (weighted average of O/C) and low H/Cwa. Conversely, such dialysates had numerous aliphatic chains with high H/Cwa and low O/Cwa compared to SRFA. In particular, LMW-DOM below 200 Da was identified by Orbitrap MS. This work provides an operational program for identifying LMW-DOM based on the SRFA standard and MS analysis.