Search

Power electronics plays a key role in the management and conversion of electrical energy in a variety of applications, including the use of renewable energy sources such as solar, wind and hydrogen energy, as well as in electric vehicles, industrial technologies, homes and smart grids. These technologies are essential for the successful implementation of the green transition, as they help reduce carbon emissions and promote the production and consumption of cleaner and more sustainable energy. The present work presents a new generation of power electronic devices and systems, which includes the following main aspects: advances in semiconductor technologies, such as the use of silicon carbide (SiC) and gallium nitride (GaN); nanomaterials for the realization of magnetic components; using a modular principle to construct power electronic devices; applying artificial intelligence techniques to device lifecycle design; and the environmental aspects of design. The new materials allow the devices to operate at higher voltages, temperatures and frequencies, making them ideal for high-power applications and high-frequency operation. In addition, the development of integrated and modular power electronic systems that combine energy management, diagnostics and communication capabilities contributes to the more intelligent and efficient management of energy resources. This includes integration with the Internet of Things (IoT) and artificial intelligence (AI) for automated task solving and work optimization.

The necessity of affordable and durable building-integrated photovoltaics has gained widespread importance for the renewable energy transition involving electrification and decarbonization in climate-neutral cities that possess many public health co-benefits. Although the PV market is dominated by polycrystalline and monocrystalline silicon solar cells of the first generation, there is an impetus in the research lately for more sophisticated solar cell architectures with higher efficiency, longer lifetime, and less use of raw materials in an eco-design approach. To accelerate building integration of the next generation of photovoltaics and the associated climate change mitigation benefits, we propose in this work a holistic novel approach to the requirements and associated parameters for the emerging and innovative PV structures, spanning from intrinsic cell properties to panels effect in the urban environment. Within this framework, and supported by building simulation, the improvement of cells’ efficiency is revealed as an important parameter for their wider PV building and urban deployment as well as a major improvement in covering the building energy needs with minimized thermal impact in the urban environment. By analyzing the lab-reported values and the timeline of emerging and novel tandem solar cells, we propose the 30% BIPV efficiency of the eco-designed BIPV products as a central milestone to be attained before 2030 for a sustainable urban transformation.

This study focuses on achieving climate neutrality in European cities by integrating solar energy technologies and nature-based solutions. Through an examination of current practices, emerging trends, and case examples, the study explores the benefits, challenges, and prospects associated with this integration in urban contexts. A pioneering approach is presented to assess the urban heat and climate change mitigation benefits of combining building-integrated photovoltaics and nature-based solutions within the European context. The results highlight the synergistic relationship between nature-based components and solar conversion technology, identifying effective combinations for different climatic zones. In Southern Europe, strategies such as rooftop photovoltaics on cool roofs, photovoltaic shadings, green walls, and urban trees have demonstrated effectiveness in warmer regions. Conversely, mid- and high-latitude European cities have seen positive impacts through the integration of rooftop photovoltaics and photovoltaic facades with green roofs and green spaces. As solar cell conversion efficiency improves, the environmental impact of photovoltaics is expected to decrease, facilitating their integration into urban environments. The study emphasizes the importance of incorporating water bodies, cool pavements, spaces with high sky-view factors, and effective planning in urban design to maximize resilience benefits. Additionally, the study highlights the significance of prioritizing mitigation actions in low-income regions and engaging citizens in the development of social photovoltaics-positive energy houses, resilient neighbourhoods, and green spaces. By adopting these recommendations, European cities can create climate-neutral urban environments that prioritize clean energy, nature-based solutions, and the overall wellbeing of residents. The findings underscore the need for a multidisciplinary approach combining technological innovation, urban planning strategies, and policy frameworks to effectively achieve climate neutrality.

Driven by growing environmental concerns and regulations, cosmetic companies are seeking reliable methods to promptly assess the possibility of replacing high-impact ingredients with sustainable alternatives. In this work, we exploited rheological and texture analyses to evaluate the possibility of using natural and biodegradable raw materials for reformulating three commercial oil-in-water skin care emulsions from an eco-design perspective. Synthetic texturizers, like nylon-12 and PMMA, were replaced with starch, maltodextrin, and silica, while acrylic rheological modifiers were substituted with polysaccharide associations of sclerotium gum, xanthan gum, diutan gum, and carrageenan. Plant-based emollients and a biodegradable elastomer were used as alternatives to silicone oils. The flow and viscoelastic properties of the samples were characterized using rheological tests under continuous and oscillatory flow conditions. The immersion/de-immersion texture analysis allowed us to measure the mechanical properties of firmness, adhesiveness, and stringiness. A double-blind sensory test assessed the products’ application and sensory characteristics. The results revealed that rheology and texture analysis are complementary and correlated techniques, useful for predicting cosmetics’ sensory characteristics. While perfect replication of the original formulas might not be achievable, this protocol can aid formulators in selecting new eco-friendly ingredients ensuring the products’ desired application and sensory properties without compromising consumer experience.

Population growth and greater global interconnection require a profound transformation in how we produce, consume, and manage natural resources. In this sense, the circular transition of the agricultural and livestock sectors is vital to guarantee adequate production without compromising the availability of resources for future generations. In this work, we analyze the level of circular development of the primary sector in Spain using a sample of the 84 largest companies. We utilize the biplot analysis, multivariate graphic models that represent the joint distribution of four scores (constructed with sixteen ecological initiatives), and three financial and geographic variables. These techniques allow for visualization of the status and the relationships between all of them. We evidence an important degree of progress in initiatives associated with the use of non-polluting energy, eco-design, eco-innovation, management, and care of ecosystems. We also observe that the current transition towards a circular primary sector is strongly associated with firms’ capital investments and long-term innovations. On the other hand, the actions aimed at protecting water resources are in an intermediate state of progress, being necessary to invest in additional friendly water initiatives. In this vein, it is advisable to promote public policies focused on promoting the ecological transition of this sector and the research that advances efficient water management.

This research presents a series of analyses related to the eco-design of polymer matrix composite parts, addressing various aspects of it. The main objective was to clarify the definition of ecological design, the benefits of its implementation and its importance in all stages of obtaining a product (design, manufacturing, recycling). Global environmental issues are presented, emphasizing the importance of adopting sustainable approaches in product design and manufacturing. Special attention is paid to the analysis of waste recycling technologies for polymer matrix composite materials. The analysis carried out identifies specific ecological design principles applicable to these materials and presents recent trends in the field. Relevant case studies are highlighted, demonstrating the benefits of ecological design in order to obtain sustainable products. Additionally, the conducted research allowed for finding answers to the questions “what”, “why”, “when” and “how” it is necessary to apply the principles of eco-design in the case of composite materials with a polymer matrix. In general, the research promotes eco-design as an indispensable strategy for sustainable and responsible production, inspiring companies to adopt these principles for the benefit of the environment and their business performance.

Power electronics converters are traditionally designed regarding efficiency, power density, cost, and reliability figures of merit. Today, with the extreme spread of power electronic applications in our modern societies, together with the earth limits in terms of materials resources, it is important to consider the ecological impact of the converter not only during its usage, but over its whole life cycle. This article introduces an eco-dimensioning methodology for analyzing and accounting for the energy consumption over the entire converter life. The analysis is applied on a small DC-DC converter considering the main components dual active bridge (DAB) converter. The planar transform is one of the key elements modeled in this article, including material and manufacturing conditions. The traditional and eco-dimensioning approaches are carried out and compared in order to emphasize the possible consequences on total energy cost.

The cosmetics industry is searching for efficient and sustainable substances capable of stabilizing emulsions or colloidal dispersions that are thermodynamically unstable because of their high surface energy. Therefore, surfactants are commonly used to stabilize the water/oil interface. However, the presence of a surfactant is not always sufficient to obtain stable emulsions on the one hand, and conventional surfactants are often subject to such controversies as their petroleum origin and environmental concerns on the other hand. As a consequence, among other challenges, it is obvious that research related to new—natural, biodegradable, biocompatible, available, competitive—surfactants are nowadays more intensive. This study aims to valorize a natural gum from Triumfetta cordifolia (T. cordifolia) as a sustainable emulsifier and stabilizer for oil-in-water (O/W) emulsions, and to evaluate how the nature of the fatty phase could affect this potential. To this end, O/W emulsions were prepared at room temperature using three different oils varying in composition, using a rotor–stator mixer. Resulting mixtures were characterized using optical microscopy, laser granulometry, rheology, pH and stability monitoring over time. The results demonstrated good potential for the gum as an emulsifying agent. T. cordifolia gum appears efficient even at very low concentrations (0.2% w/w) for the preparation and stabilization of the different O/W emulsions. The best results were observed for cocoglyceride oil due to its stronger effect of lowering interfacial tension (IFT) thus acting as a co-emulsifier. Therefore, overall results showed that T. cordifolia gum is undoubtedly a highly promising new bio-sourced and environmentally friendly emulsifier/stabilizer for many applications including cosmetics.

Based on the consideration of various environmental problems caused by human activities, energy transition solutions are starting to emerge. Power electronics will be central to these transitions. The level of knowledge linking power electronics and sustainability remains very limited today, and the study of the environmental impacts tied to the mass-scale deployment of power electronic systems across all sectors of activity is now essential. This study presents the life cycle assessment of a power electronic inverter capable of delivering a power of 150 kW, operating with an average 450 V DC bus for 15 years with 10,000 operating hours. The main hotspots are investigated to offer recommendations to designers. The most important impact highlighted is the depletion of mineral resources. Manufacturing and use are the two subsections with the highest environmental impact. Manufacturing is dominated by the casing and power module (specifically, the electric contacts, baseplate, and die). These results make it possible to orient an eco-design action with technologies capable of creating an evolution in hotspots. However, they also serve to consider scenarios involving a circular economy by setting up maintenance, recycling, and reuse loops in the inverter, combined with modularity and self-diagnostic functions.

This life cycle assessment (LCA) study focused on comparing the environmental performances of two types of synthesis strategies for polyethyleneimine (PEI) coated silica particles (organic/inorganic composites). The classic layer-by-layer and the new approach (one-pot coacervate deposition) were the two synthesis routes that were tested for cadmium ions removal from aqueous solutions by adsorption in equilibrium conditions. Data from the laboratory scale experiments for materials synthesis, testing, and regeneration, were then fed into a life cycle assessment study so that the types and values of environmental impacts associated with these processes could be calculated. Additionally, three eco-design strategies based on material substitution were investigated. The results point out that the one-pot coacervate synthesis route has considerably lower environmental impacts than the layer-by-layer technique. From an LCA methodology point of view, it is important to consider material technical performances when defining the functional unit. From a wider perspective, this research is important as it demonstrates the usefulness of LCA and scenario analysis as environmental support tools for material developers because they highlight environmental hotspots and point out the environmental improvement possibilities from the very early stages of material development.

It is estimated that Reverse Osmosis (RO) desalination will produce, by 2025, more than 2,000,000 end-of-life membranes annually worldwide. This review examines the implementation of circular economy principles in RO technology through a comprehensive analysis of the RO membrane life cycle (manufacturing, usage, and end-of-life management). Future RO design should incorporate a biobased composition (biopolymers, recycled materials, and green solvents), improve the durability of the membranes (fouling and chlorine resistance), and facilitate the recyclability of the modules. Moreover, proper membrane maintenance at the usage phase, attained through the implementation of feed pre-treatment, early fouling detection, and membrane cleaning methods can help extend the service time of RO elements. Currently, end-of-life membranes are dumped in landfills, which is contrary to the waste hierarchy. This review analyses up to now developed alternative valorisation routes of end-of-life RO membranes, including reuse, direct and indirect recycling, and energy recovery, placing a special focus on emerging indirect recycling strategies. Lastly, Life Cycle Assessment is presented as a holistic methodology to evaluate the environmental and economic burdens of membrane recycling strategies. According to the European Commission’s objectives set through the Green Deal, future perspectives indicate that end-of-life membrane valorisation strategies will keep gaining increasing interest in the upcoming years.

Sustainability-related information affects people’s choices and evaluation. The literature has made significant efforts to understand the best ways of delivering this kind of information to shape consumer behavior. However, while most studies have focused on packaged products and direct information provided through eco-labels, preferences could be formed differently in other design domains. The paper investigates the effect of the perceived amount of indirect information on the evaluation of an architectural artefact. A sample of 172 participants visited a locally produced mobile tiny house, made with a considerable amount of sustainable materials. The same participants answered a questionnaire about their perceived knowledge, quality, appropriateness and sustainability of the tiny house. The general level of knowledge of the tiny house was used as a proxy of the amount of indirect information received. Although the knowledge of the tiny house was generally low, ratings regarding the other dimensions were overall extremely positive. In particular, no evident relation was found between knowledge of the tiny house and sustainability, while the latter is significantly linked to quality aspects. These outcomes deviate from the evidence from other studies; this might be due to indirect vs. direct information and the peculiarity of the study carried out in the field of buildings. The gathered demographic and background data of the participants make it possible to highlight the role played by gender and age in affecting the evaluations, but the absence of a significant impact of experience in the field, education and origin. The results are compared with findings related to the evaluation of sustainable products and green buildings in particular.

In a circular economy context with the dual problems of depletion of natural resources and the environmental impact of a growing volume of wastes, it is of great importance to focus on the recycling process of multilayered plastic films. This review is dedicated first to the general concepts and summary of plastic waste management in general, making emphasis on the multilayer films recycling process. Then, in the second part, the focus is dealing with multilayer films manufacturing process, including the most common materials used for agricultural applications, their processing, and the challenges of their recycling, recyclability, and reuse. Hitherto, some prospects are discussed from eco-design to mechanical or chemical recycling approaches.

In this paper, we describe a method for determining polymer compatibility, which will aid in establishing the requirements of polyolefinic materials for the eco-design of multilayer films for mechanical recycling while avoiding the use of reactive tie layers. Our ultimate goal is to define the molecular characteristics of the polyolefinic structural layer that improve compatibility with the tie layer during mechanical recycling. We have investigated the melting temperature depression of single crystals of various polyethylenes embedded in commercial polymeric matrices with various functionalities (ester, acrylate, acetate and methacrylic acid sodium ionomer), which can be potentially used as tie layers. We demonstrate how the concentration and molecular architecture of the matrices affect the melting temperature of the embedded single crystals differently depending on the latter’s molecular architecture. The main finding indicates that the tie layers are more compatible with linear polyethylene than with branched polyethylenes. Indeed, our results show that the heterogeneous Ziegler–Natta linear low-density polyethylene is incompatible with all of the tie layers tested. The depression of melting temperatures observed are in excellent agreement with the results obtained by investigating the rheological behaviour and morphological features of solution-mixed blends in which segmental interactions between polymeric chains have been, in theory, maximized. Because Ziegler–Natta linear density polyethylene is one of the most commonly used polymers as a structural layer in multi-layer applications, the findings of this study are useful as they clearly show the unsuitability of this type of polyethylene for recycling from an eco-design standpoint. The specific molecular requirements for polyethylene layers (branching content less than 0.5/100 carbon atoms) can be specified for use in packaging, guiding the eco-design and valorisation of recycled multi-layered films containing this material.

From a life-cycle perspective, the design stage is the key to controlling the environmental impacts of a product because at this stage, all the different parameters can be optimized to realize the required functions while ensuring that the product is environmentally friendly. Here, it is proposed that the optimization of an eco-design should be completed during the concept design stage to strike a balance between the environmental impacts and mechanical property requirements of the product. In this study, experimental data for these two parameters were first obtained via life-cycle assessments and von Mises stress analyses, respectively. Next, the response surface method was adopted to acquire the approximation functions. Finally, a genetic algorithm was employed for multi-objective optimization to realize the eco-design of the product. The proposed methodology was illustrated and evaluated by taking a liquid crystal display monitor design as an example. The results show that material thickness of the mirror is a key parameter that affects both objectives of the product. Although the mechanical properties of ABS are slightly worse than that of PS, it is the best choice for multi-objective optimization while considering the environmental impact at the same time.

The still-rising global demand for plastics warrants the substitution of non-renewable mineral oil-based resources with natural products as a decisive step towards sustainability. Lignin is one of the most abundant natural polymers and represents an ideal but hitherto highly underutilized raw material to replace petroleum-based resources. In particular, the use of lignin composites, especially polyolefin–lignin blends, is currently on the rise. In addition to specific mechanical property requirements, a challenge of implementing these alternative polymers is their heavy odor load. This is especially relevant for lignin, which exhibits an intrinsic odor that limits its use as an ingredient in blends intended for high quality applications. The present study addressed this issue by undertaking a systematic evaluation of the odor properties and constituent odorants of commercially available lignins and related high-density polyethylene (HDPE) blends. The potent odors of the investigated samples could be attributed to the presence of 71 individual odorous constituents that originated primarily from the structurally complex lignin. The majority of them was assignable to six main substance classes: carboxylic acids, aldehydes, phenols, furan compounds, alkylated 2-cyclopenten-1-ones, and sulfur compounds. The odors were strongly related to both the lignin raw materials and the different processes of their extraction, while the production of the blends had a lower but also significant influence. Especially the investigated soda lignin with hay- and honey-like odors was highly different in its odorant composition compared to lignins resulting from the sulfurous kraft process predominantly characterized by smoky and burnt odors. These observations highlight the importance of sufficient purification of the lignin raw material and the need for odor abatement procedures during the compounding process. The molecular elucidation of the odorants causing the strong odor represents an important procedure to develop odor reduction strategies.

In recent times, there has been an indisputable need to move towards a more sustainable economy, known as a circular economy, which is basically aimed at reducing the consumption of newly extracted raw materials to manufacture products, and thus, reduces waste generation by recycling products beyond their useful life to ultimately close the economic flow of the product. For the economy generated by products to close the circle, it is essential to tackle the problem at the source, that is, the process to achieve the desired product should be conducted by designing the product with environmental criteria (eco-design) and analysing its life cycle from the extraction process to the point when it ends its useful life (LCA). This article presents an ECO + LCA methodology that provides designers with an easy way of visualising the effect of their design decisions on the final environmental impact of the product. This methodology was tested on a case study of a conventional desk, with four alternative scenarios presented and an assessment of their final impact with a cradle-to-grave perspective. The final design obtained reduces the environmental impact by more than 30% and reduces costs by more than 11%.

As public attention on sustainability is increasing, the use of polysaccharides as rheological modifiers in skin-care products is becoming the first choice. Polysaccharide associations can be used to increase the spreading properties of products and to optimize their sensorial profile. Since the choice of natural raw materials for cosmetics is wide, instrumental methodologies are useful for formulators to easily characterize the materials and to create mixtures with specific applicative properties. In this work, we performed rheological and texture analyses on samples formulated with binary and ternary associations of polysaccharides to investigate their structural and mechanical features as a function of the concentration ratios. The rheological measurements were conducted under continuous and oscillatory flow conditions using a rotational rheometer. An immersion/de-immersion test conducted with a texture analyzer allowed us to measure some textural parameters. Sclerotium gum and iota-carrageenan imparted high viscosity, elasticity, and firmness in the system; carob gum and pectin influenced the viscoelastic properties and determined high adhesiveness and cohesiveness. The results indicated that these natural polymers combined in appropriate ratios can provide a wide range of different textures and that the use of these two complementary techniques represents a valid pre-screening tool for the formulation of green products.

Innovative toilets can save resources, but have higher embodied impacts associated with materials and electronic components. This article presents an environmental life-cycle assessment (LCA) of an innovative multifunctional toilet (WashOne) for two alternative configurations (with or without washlet), comparing its performance with those of conventional systems (toilet and bidet). Additionally, two scenario analyses were conducted: (i) user behavior (alternative washlet use patterns) and (ii) user location (Portugal, Germany, the Netherlands, Sweden and Saudi Arabia). The results show that the WashOne with washlet has a better global environmental performance than the conventional system, even for low use. It also reveals that the use phase has the highest contribution to impacts due to electricity consumption. User location analysis further shows that Sweden has the lowest environmental impact, while Germany and the Netherlands have the highest potential for impact reduction when changing from a conventional system to the WashOne. Based on the overall results, some recommendations are provided to enhance the environmental performance of innovative toilet systems, namely the optimization of the washlet use patterns. This article highlights the importance of performing a LCA at an early stage of the development of innovative toilets by identifying the critical issues and hotspots to improve their design and performance.

In recent years, the application of engineered nanomaterials (ENMs) in environmental remediation gained increasing attention. Due to their large surface area and high reactivity, ENMs offer the potential for the efficient removal of pollutants from environmental matrices with better performances compared to conventional techniques. However, their fate and safety upon environmental application, which can be associated with their release into the environment, are largely unknown. It is essential to develop systems that can predict ENM interactions with biological systems, their overall environmental and human health impact. Until now, Life-Cycle Assessment (LCA) tools have been employed to investigate ENMs potential environmental impact, from raw material production, design and to their final disposal. However, LCA studies focused on the environmental impact of the production phase lacking information on their environmental impact deriving from in situ employment. A recently developed eco-design framework aimed to fill this knowledge gap by using ecotoxicological tools that allow the assessment of potential hazards posed by ENMs to natural ecosystems and wildlife. In the present review, we illustrate the development of the eco-design framework and review the application of ecotoxicology as a valuable strategy to develop ecosafe ENMs for environmental remediation. Furthermore, we critically describe the currently available ENMs for marine environment remediation and discuss their pros and cons in safe environmental applications together with the need to balance benefits and risks promoting an environmentally safe nanoremediation (ecosafe) for the future.

Customers are considered to be major stakeholders whose demands and preferences have a strong influence on corporate strategies. In this sense, increased consumer environmental awareness has led to a growing demand for environmentally friendly products which, in turn, has compelled firms to adopt innovative forms of integrating environmental protection into product development and production processes. Nevertheless, an “attitude–behavior gap” has been witnessed, which implies that consumers’ environmental attitudes do not always translate into an actual ecologically compatible purchasing behavior and, consequently, eco-product innovations will not necessarily entail a positive economic impact for companies. This paper aims to analyze if the companies that invest in eco-product innovation are valued by consumers, showing higher growth. Specifically, we propose that eco-product innovation has a positive effect on a firm’s sales growth. Additionally, we aim to analyze the consumers’ preferences in relation to eco-product innovations considering two alternative approaches that companies can follow in this respect: eco-design and products with ecological use. The results obtained for an unbalanced sample of 5391 international companies corresponding to the period 2002–2017 (51,666 observations) show that proactive environmental innovation strategies are positively valued by consumers, having a positive impact on the companies’ sales growth. Furthermore, consumers show a greater preference for environmental innovations in eco-design than for products with ecological use.

The building sector is responsible for extensive resource consumption and waste generation, resulting in high pressure on the environment. A way to potentially mitigate this is by including environmental considerations during building design through the concept known as eco-design. Despite the multiple available approaches of eco-design, the latter is not easily achieved in the building sector. The objective of this paper is to identify and discuss what barriers are currently hindering the implementation of eco-design in the building sector and by which measures building designers can include environmental considerations in their design process. Through a systematic literature review, several barriers to implementation were identified, the main ones being lack of suitable legislation, lack of knowledge amongst building designers, and lack of suitable tools for designers to use. Furthermore, two specific tools were identified that allow the inclusion of environmental consideration in building design, along with nine design strategies providing qualitative guidance on how to potentially minimize energy and material consumption, as well as waste generation. This paper contributes a holistic overview of the major barriers to and existing tools and method for the eco-design of buildings, and provides guidance for both future research and practice.

This paper describes a future-oriented approach for the valorization of polyethylene-based multilayer films. The method involves going from eco-design to mechanical recycling of multilayer films via forced assembly coextrusion. The originality of this study consists in limiting the number of constituents, reducing/controlling the thickness of the layers and avoiding the use of tie layers. The ultimate goal is to improve the manufacturing of new products from recycled multilayer materials by simplifying their recyclability. Within this framework, new structures were developed with two polymer systems: polyethylene/polypropylene and polyethylene/polystyrene, with nominal micro- and nanometric thicknesses. Hitherto, the effect of the multi-micro/nanolayer architecture as well as initial morphological and mechanical properties was evaluated. Several recycling processes were investigated, including steps such as: (i) grinding; (ii) monolayer cast film extrusion; or (iii) injection molding with or without an intermediate blending step by twin-screw extrusion. Subsequently, the induced morphological and mechanical properties were investigated depending on the recycling systems and the relationships between the chosen recycling processes or strategies, and structure and property control of the recycled systems was established accordingly. Based on the results obtained, a proof of concept was demonstrated with the eco-design of multi-micro/nanolayer films as a very promising solution for the industrial issues that arise with the valorization of recycled materials.

This research considers the ecosystem services associated with furniture, one of the leading types of secondary wood products manufactured internationally. We review and synthesize the literature surrounding the sustainable design, use, and disposition of wood furniture and related products in global markets. We consider emerging and innovative design strategies for wood (in biomimicry, for example) as well as topics that have been gaining traction in recent years (i.e., green supply chain management and eco/environmental labels and related market communications). An overarching theme is to consider how firm competitiveness can be influenced, or even enhanced, by green practices in design and associated communications with consumers. With a trend toward increasing customization in the secondary wood product marketplace, the role of design might be changing. However, design remains a critical product development function in modern markets, and designers are well-positioned to influence sustainable material utilization and improve furniture product use and lifespan.

Environmental hydraulics research includes the different domains of hydrodynamics, such as the investigation and implementation of the physical and experimental applications, and research into the quantity, quality, modelling and simulation of the attributes associated with flowing water. This topic is studied both from a technical and environmental point of view, with the objective of protecting and enhancing the quality of the environment. It is a cross-disciplinary field of study which comprises open channel/river flows and pressurised systems, combining, among others, new technological, social, and environmental hydraulic challenges. It provides researchers and engineers working in water-related fields with available information, new concepts and tools, new design solutions, eco-friendly technologies, and the advanced materials necessary to address the increasing challenges of ensuring a sustainable water environment—that is, a water environment effectively managed and adequated for generations to come by promoting the adaptation, flexibility, integration and sustainability of recognised environmental solutions. Using advanced numerical and physical models in field experiments, and tests in different types of laboratory set-ups, specialists in environmental hydraulics produce the best analyses, concepts, techniques, tools, and solutions to environmental hydraulic problems, as well as in relation to the water, energy and environmental nexus.

Designing eco-friendly products involves energy efficiency improvements. Eco-friendly products must consider not only raw materials and manufacturing processes to improve energy efficiency but also energy needed when designing them. This research shows how eco-routing (ER), eco-charging (EC), eco-driving (EDR), vehicle-to-grid (V2G) and electric vehicles (EVs) can contribute to the reduction of energy consumption during product design. To do this, a group of 44 engineers assigned to the project was chosen to assess the total energy available for V2G when driving EVs from their homes to the design center by using ER, ED and EC by running an application coded by the authors. The energy stored in EVs was used to quantify the reduction in energy consumption of the buildings present in the design center. The results show that the energy saving ranges from 2.89% to 6.9% per day—in other words, 93 kWh per day during the design process. In addition, the fact of making the design process greener implies that renewable energies (REs) are integrated better during the design process. By running the application, drivers are informed about the RE mix when the charging process takes place. Finally, this research shows that current policies make V2G and vehicle-to-home techniques not compatible.

Due to the rapid development of recycling technologies in recent years, more data have appeared in the literature on the environmental impact of the final stages of the life cycle of wind and solar energy. The use of these data in the eco-design of modern power generation systems can help eliminate the mistakes and shortcomings when planning wind and solar power plants and make them more eco-efficient. The aim of this study is to extend current knowledge of the environmental impacts of most common renewables throughout the entire life cycle. It examines recent literature data on life cycle assessments of various technologies for recycling of wind turbines and photovoltaic (PV) panels and develops the recommendations for the eco-design of energy systems based on solar and wind power. The study draws several general conclusions. (i) The contribution of further improvements in PV’s recycling technologies to environmental impacts throughout the entire life cycle is insignificant. Therefore, it is more beneficial to focus further efforts on economic parameters, in particular, on achieving the economic feasibility of recycling small volumes of PV-waste. (ii) For wind power, the issue of transporting bulky components of wind turbines to and from the installation location is critical for improving the eco-design of the entire life cycle.

In recent years, there has been an increase in the adoption of quality tools by companies. As such, there has been a commitment to innovation by the organizations to obtain competitive advantages by the development of new products and technologies focused on the creation of economic value but also on delivering sustainability. This study aims to develop an application model of the inventive resolution theory in conjunction with the Eco-Compass ecological innovation tool, in order to allow solutions to be obtained systematically, and to present a performance increase of certain environmental parameters, promoting thus sustainable innovation. The case study research methodology is used to frame the research. The company under study is Nokia enterprise, located in Portugal, which offers a set of services related to telecommunications infrastructures. The unit of analysis is the department of transformation and continuous improvement, and the study illustrated the application of combined use of theory of inventive problem solving (TRIZ) and Eco-compass to develop innovative solutions systematically. The results show that it is possible to achieve innovation according to a certain level of established sustainable environmental parameters, while at the same time solving the identified inventive problem.

With water scarcity representing an increasing threat to humans, the environment and the economy, companies are interested in exploring how their operations and supply chains affect water resources globally. To allow for systematically compiling the water footprint at the company level, the organizational water footprint method based on ISO 14046 and ISO/TS 14072 was developed. This paper presents the first complete organizational water scarcity footprint case study carried out for Neoperl GmbH, a German company that offers innovative solutions regarding drinking water for the plumbing industry. The cradle-to-gate assessment for one year includes, besides facility-based production activities, purchased materials, electricity and fuels, and supporting activities, such as company vehicles and infrastructure. Neoperl’s total freshwater consumption amounts to approximately 110,000 m3, 96% thereof being attributable to the supply chain, with freshwater consumption through purchased metals playing the predominant role. Metals (mainly stainless steel and brass) are major hotspots, also when considering the water scarcity-related local impacts resulting from freshwater consumption, which mainly affect China and Chile. These results can be used to improve the company’s supply chain water use in cooperation with internal and external stakeholders by means of, e.g., sustainable purchase strategies or eco-design options to substitute water intensive materials.

For manufacturing companies, the transition to circular business models (CBMs) can be hampered both by the lack of relevant data and by operational tools. Eco-design, associated with Industry 4.0 IoT (Internet of Things) technologies, can be an effective methodological approach in developing products that are consistent with the principles of the circular economy. The reason is that, in the design phase, decisions are made that can significantly influence the degree of sustainability of products during their lifecycle. Therefore, in the manufacturing environment, eco-design represents an innovative approach to include sustainability among the traditional industrial variables such as functionality, aesthetics, quality, and profit. This study aimed to test eco-design as a tool to define the equilibrium point between sustainability and circular economy in the manufacturing environment of ceramic tile production, and to demonstrate how new business opportunities can be created through evolution from a linear to a circular business model, thanks to IoT and Industry 4.0 technologies used as enabling factors. The main result of this paper was the empirical validation in a manufacturing environment of sustainability paradigms through eco-design tools and digital technologies, proposing the circular business model as an operational tool to promote the competitiveness of enterprises.

The development of vital competencies and a mindset to rethink products, production, and business models in engineering and design students is presently of great importance. These future professionals will play a key role in the development of sustainable products. Within Eco-design and Eco-efficiency curricular unit, an assignment was developed that consisted of the development of an eco-design and eco-efficiency study of a given product, provided by a real industrial company. In this paper, the challenge description and application are reported, as well as the key conclusions.

This life cycle assessment (LCA) study focused on comparing the environmental performances of two types of synthesis strategies for polyethyleneimine (PEI) coated silica particles (organic/inorganic composites). The classic layer-by-layer and the new approach (one-pot coacervate deposition) were the two synthesis routes that were tested for cadmium ions removal from aqueous solutions by adsorption in equilibrium conditions. Data from the laboratory scale experiments for materials synthesis, testing, and regeneration, were then fed into a life cycle assessment study so that the types and values of environmental impacts associated with these processes could be calculated. Additionally, three eco-design strategies based on material substitution were investigated. The results point out that the one-pot coacervate synthesis route has considerably lower environmental impacts than the layer-by-layer technique. From an LCA methodology point of view, it is important to consider material technical performances when defining the functional unit. From a wider perspective, this research is important as it demonstrates the usefulness of LCA and scenario analysis as environmental support tools for material developers because they highlight environmental hotspots and point out the environmental improvement possibilities from the very early stages of material development.

Customer feedback is used to understand customer requirements. Early design phases require the consideration of items including manufacturing, the environment, and sustainability management. Therefore, it is crucial that eco-efficiency is taken into account in the early design phases. Traditionally, eco-efficiency is considered only in terms of eco-design issues, not customer requirements based on business values such as Recency, Frequency, and Monetary (RFM) value. In the meantime, integrating innovation from eco-design is one important aspect. Here, I propose that customer feedback-based eco-efficiency and TRIZ-based innovation can be considered in early eco-design based on the RFM value for sustainability management. The analytic hierarchy process (AHP) and fuzzy-based AHP were integrated to explore the relative weights of RFM variables for business value evaluation. The innovative method of the paper is using a TRIZ contradiction matrix associated with engineering parameters for eco-design. The experimental study has been carried out, and it meets the forecasting business value for green product usage. The business value was used as the decision-making factor in order to evaluate both environmental and marketing performance.

Annually, it is estimated that about 4 billion units of consumer electronics for mobile communications are produced worldwide. This could lead to various ecological imbalances unless the design and disposal of the products are handled optimally. To illustrate how industry looks at and responds to the increasing social awareness, this article describes how sustainability is successfully implemented in practice at a large Chinese company, developing and producing various kinds of electronic products used for communication. It also describes how a variety of eco-innovations and business models contribute to reducing the environmental impact; for example, through increased recovery and recycling. A new kind of eco-design procedure is presented along with a new methodology which shows how a mobile phone gradually becomes more sustainable from one generation to the next. The issues with and set-up of new eco-labeling schemes for mobile phones, eco-rating, is described in detail. The conclusion is that due to high competition between companies, the industry acts resourcefully and a lot is done to the save the ecological environment.