Search

Fiber-type electronics is a crucial field for realizing wearable electronic devices with a wide range of sensing applications. In this paper, we begin by discussing the fabrication of fibers from conjugated polymers. We then explore the utilization of these fibers in the development of field-effect and electrochemical transistors. Finally, we investigate the diverse applications of these fiber-type transistors, encompassing chemical and physical sensors. Our paper aims to offer a comprehensive understanding of the use of conjugated polymers in fiber-type transistor-based sensors.

In this study, we investigated the gas-sensing mechanism in bottom-gate organic field-effect transistors (OFETs) using poly(triarylamine) (PTAA). A comparison of different device architectures revealed that the top-contact structure exhibited superior gas-sensing performance in terms of field-effect mobility and sensitivity. The thickness of the active layer played a critical role in enhancing these parameters in the top-contact structure. Moreover, the distance and pathway for charge carriers to reach the active channel were found to significantly influence the gas response. Additionally, the surface treatment of the SiO2 dielectric with hydrophobic self-assembled mono-layers led to further improvement in the performance of the OFETs and gas sensors by effectively passivating the silanol groups. Under optimal conditions, our PTAA-based gas sensors achieved an exceptionally high response (>200%/ppm) towards NO2. These findings highlight the importance of device and interface engineering for optimizing gas-sensing properties in amorphous polymer semiconductors, offering valuable insights for the design of advanced gas sensors.

Soil pollution caused by oil leakage from various industrial facilities such as gas stations, oil plants, military bases, and railway depots has become a serious global environmental and geotechnical issue. The indirect-heated microwave thermal desorption technology has been developed in this study for economical and efficient remediation of oil or organic pollutants. The conclusions were made based on laboratory tests and analyses of the environmental (TPH; total petroleum hydrocarbons) and geotechnical (physical and mechanical) properties of the soil before and after treatments. (1) As the newly-developed equipment was operated for 3 h with the electric power of 32 kW to reach target temperature of 600 °C, more than 99.8% of TPH was removed. (2) In the aspect of geotechnical properties, the internal friction angle, maximum dry density and permeability coefficient of the soil were reduced by oil contamination and were finally restored to the almost initial level of the soil after treatment. Therefore, treated soil is expected to be reusable for geotechnical construction purposes such as construction fill materials. (3) It was also found that the developed technology reduces 75% of energy cost and 25% of CO2 emissions for the remediation of lubricant oil-contaminated soil comparing with conventional one.

The feasibility of the electrical resistance heating method developed in this study was evaluated for the remediation of multi-contaminated silty sand in terms of environmental and geotechnical aspects. The multi-contaminated silty sand sampled in this study was polluted with 21,081 mg/kg of heavy oils, as well as heavy metals. Silty sand, treated using the electrical resistance _heating method was environmentally, as well as geotechnically, compared with the multi-contaminated silty sand in terms of residual concentration, leaching, shear modulus and modified California bearing ratio (CBR). The remediation test was conducted with a target temperature of 700 °C. The removal efficiency of total petroleum hydrocarbon (TPH) was estimated as 99.99% after remediation in 48 h; most of the heavy metals, as some of the contaminants, were isolated as a crystal in treated silty sand without any harmful leakage, and heavy oil was fully extracted with a form of mist and dust. Moreover, it was also geotechnically found that the decontamination process, including the removal of heavy metals and oils, had an effect on the increase in the internal friction angle, shear modulus and modified CBR of treated silty sand. In conclusion, it is shown that the electrical resistance heating method developed in this study is an environmentally and geotechnically effective technology for the recovery of clean construction fill material from hazardous-waste-contaminated silty sand.

A fully integrated sensor array assisted by pattern recognition algorithm has been a primary candidate for the assessment of complex vapor mixtures based on their chemical fingerprints. Diverse prototypes of electronic nose systems consisting of a multisensory device and a post processing engine have been developed. However, their precision and validity in recognizing chemical vapors are often limited by the collected database and applied classifiers. Here, we present a novel way of preparing the database and distinguishing chemical vapor mixtures with small data acquisition for chemical vapors and their mixtures of interest. The database for individual vapor analytes is expanded and the one for their mixtures is prepared in the first-order approximation. Recognition of individual target vapors of NO2, HCHO, and NH3 and their mixtures was evaluated by applying the support vector machine (SVM) classifier in different conditions of temperature and humidity. The suggested method demonstrated the recognition accuracy of 95.24%. The suggested method can pave a way to analyze gas mixtures in a variety of industrial and safety applications.