Search

As of 2022, roughly 79.8% of Malaysia’s population resides in urban areas, increasing the population density of its cities. The hot and humid climate in Malaysia necessitates the constant use of air conditioning, especially in cities, resulting in high residential electric consumption and carbon emissions. The residential sector significantly contributes to global climate change, accounting for 27% of global energy consumption and 17% of carbon emissions. To address this concern, the local framework of the National Low Carbon Cities Masterplan (NLCCM) is advocating for a minimum 33% reduction in carbon emissions by 2030 in urban settings, aligning with the commitments made at the 15th Conference of Parties (COP 15). The aim of this study was to determine the energy consumption and carbon emission of residential areas in a tropical city, as well as explore potential energy and carbon savings. Utilizing the Intelligent Communities Lifecycle–Intelligent Community Design (iCL-iCD) energy simulation software, a digital twin of Bertam City, Penang, was developed. This digital model included 65.4% residential housing, which, in the specific scenario under study, accounted for 36% of the city’s electrical energy consumption for cooling purposes only. An early simulation of the residential areas of the city estimated the baseline energy consumption and carbon emissions to be 607 GWh and 314,736 tCO2e, respectively. Several energy-efficient measures were applied to the residential area of Bertam City, revealing a potential saving of 37.3% in both energy and carbon emissions.

Previous researchers have detailed the problems in measuring the thermal resistance value of a whole roof assembly under hot conditions due to the uncertainty of the outdoor environment. Currently, no established method exists to experimentally investigate an entire thermal roof performance under a steady-state condition. This article details the properties of the indoor solar simulator and the research methods undertaken to measure the thermal resistance value of roof assembly. The indoor solar simulator utilizes 40 halogen bulbs to accurately replicate sun radiation. Thermocouples and heat flux sensors are installed at several locations on the roof assembly to quantify the heat transmission occurring through it. The thermal resistance value is determined by adding up the average difference in temperature across the external and internal roof surfaces and dividing the total amount by the total of all averaged heat fluxes. Subsequently, this study investigates the thermal efficiency of residential roof assemblies that comprise various insulation materials frequently employed in Malaysia, including stone wool, mineral glass wool, reflective bubble foil insulation, and radiant barriers. The analysis showed that the roof configurations with bubble foil reflective insulation produce superior thermal resistance values when coupled with enclosed air space or mass insulation, with thermal resistance values ranging between 2.55 m2K/W and 3.22 m2K/W. It can be concluded that roof configurations with bubble foil reflective insulation resulted in high total thermal resistance and passed the minimum thermal resistance value of 2.5 m2K/W under the Malaysian Uniform Building By-Law 38 (A) requirements. Furthermore, the radiant barrier produced a high thermal resistance value of 2.50 m2K/W when installed parallel to a 50 mm enclosed air space, emphasising the crucial function of an enclosed air space next to a reflective foil to resist the incoming heat radiation. The findings from this research can help building professionals determine the optimum insulation for residential building roofs in Malaysia.