Search

This paper investigated the optimization of the hardness and oscillation mode of flexible hydrofoils using bidirectional fluid–structure interaction (FSI) to address the issue of insufficient guidance in engineering applications. A two-dimensional flexible symmetric hydrofoil model of NACA0012 with a chord length of 1 m was constructed for this research. The hydrodynamic characteristics of low-frequency flexible hydrofoils with varying hardness and oscillation modes were analyzed through numerical simulation. The results indicated that the flexible hydrofoil with a Shore hardness of D50 exhibited the most optimal hydrodynamic performance under low-frequency conditions across the five groups of hardness tests. Among the three commonly utilized oscillation modes, the inboard oscillation mode demonstrated the most favorable performance. The hydrodynamic performance of the flexible hydrofoil surpassed that of the rigid hydrofoil in both inward and outward oscillation motions; however, it was inferior in pure pitching motions. Comparative analysis of the vortex structure and velocity distribution in the flow field revealed that the inward oscillation motion effectively enhanced the kinetic energy of the wake vortex and slowed down vortex dissipation, thereby improving the overall flow velocity. These findings provide theoretical support for the study of flexible hydrofoils and contribute to their advancement in pumping applications under actual ultra-low head conditions.

To investigate the influence of the chord length and frequency of an oscillating hydrofoil device on the discharge characteristics of floating particulate matter, in this study, we take raceway aquaculture as an example and systematically compare and analyze the flow field characteristics of the hydrofoil device with different chord lengths and frequencies, as well as the sewage discharge performance of the raceway based on Computational Fluid Dynamics (CFD). The results indicate that in the particulate matter discharge process of raceway aquaculture, when the chord length and motion frequency of the hydrofoil device are 0.1 W (W is the width of the raceway) and 1.0 Hz, respectively, the anti-Karman vortex streets produced by the hydrofoil device are less affected by the wall, the flow field is the most uniform, the particulate matter discharge performance is the best, and the final floating particulate matter discharge rate reaches up to 99.09%. Adjusting the chord length of the hydrofoil can effectively ameliorate flow field reflux issues, enhancing the uniformity and flow performance of the flow field. When the chord length is 0.1 W, the uniformity of the flow field is optimal. When the chord length is 0.2 W, the flow performance of the flow field is superior. Increasing the frequency enhances the flow performance of the flow field, with an average increase of 0.1 Hz in motion frequency leading to a 19.42% improvement in the average velocity at the outlet. Based on this, we recommend the use of a hydrofoil device with a chord length of 0.1 W and a motion frequency of 1.0 Hz in the raceway aquaculture system to achieve optimal particulate matter discharge performance, providing a theoretical basis and practical guidance for using hydrofoil devices to improve the efficiency of floating particulate matter treatment in raceway aquaculture environments.

In order to study the effect of the pumping depth and pumping frequency of the flapping hydrofoil device on suspended solids in the waters, this paper takes raceway aquaculture as an example, and introduces a flapping hydrofoil device to improve the discharge of suspended solids in the raceway, in response to the problem of the deposition of suspended solids from fish faeces and bait residues in water. The CFD method was used to compare and analyze the discharge of suspended solids at different pumping depths, and the combined effect of the two was studied according to different combinations of pumping frequency and pumping depth. The results proved that the flapping hydrofoil motion can improve the bottom hydrodynamic insufficiency in ecological waters and thus enhance the discharge effect of suspended particles in water. In addition, the pumping depth of the flapping hydrofoil is too deep for the movement to be disturbed by the bottom surface, while the thrust generated by the flapping hydrofoil is weakened if the depth is too shallow. When the pump water depth is 1.1 H, the reversed Kármán vortex street is more stable under the balancing effect of the bottom surface and gravity, and the rate curve of the flapping hydrofoil acting on the discharge of suspended particles is better. From our comprehensive consideration of the joint effect of the pumping depth and pumping frequency, we recommend the use of a 1.1 H of pumping depth and 2.0 Hz pumping frequency in combination to achieve the best effect of discharging suspended particles. This study provides valuable insights into the actual engineering applications of flapping hydrofoil devices for improving water quality and ecological sustainability in raceway aquaculture.