Search

[EN] The presence of cyclists on Spanish rural roads is ever increasing and currently frequent, and thus becoming a serious safety concern. In rural environments, the risk of a crash is higher than in rural areas. The main cause is the higher speed of motor vehicles during overtaking manoeuvres. This manoeuvre is especially challenging when cyclists ride in groups as they may change size, length, shape, and speed along their route. These variables and those related to road cross-section can influence driver behaviour when overtaking a group of cyclists. To study this, instrumented bicycles were used to ride along five road segments with different geometric and traffic characteristics. Cyclists rode individually and in groups. Overtaking was evaluated by analysing the lateral distance, the speed, and other characteristics of the manoeuvre. Wider roads presented higher lateral clearances and overtaking speeds. Narrower roads had a high opposing lane invasion but a high level of compliance with the minimum lateral clearance. A higher clearance and lower speed of overtaking vehicles was registered when cyclists rode in line. Compliance with the 1.5 m clearance depended on the group configuration, being higher when cyclists rode in line. However, overtaking cyclists riding two abreast presented more accelerative manoeuvres, especially on narrow roads., This research is part of the research project TRA2016-80897-R, funded by MCIN/AEI/10.13039/501100011033 and the research project SPIP2017-02280, funded by the General Directorate of Traffic of Spain.

The use of micromobility vehicles is considerably growing in cities worldwide. As a result, crashes involving these vehicles are also increasing, with single-bicycle crashes accounting for a significant percentage. In most infrastructure-related crashes, the road surface was slippery. In this context, the study of pavement skid resistance is crucial to improve micromobility safety. In this research, the British pendulum tester was used to test the skid resistance of 5 different types of pavements on 17 bike lane locations in Valencia (Spain). Additionally, micromobility users’ speed was collected to analyse users’ behaviour. The results showed that asphalt, concrete, and rough painted tile pavements had the greatest skid resistance, whereas painted cobble and smooth painted tile pavements presented poor skid resistance. These values were compared with the limits set by the few guidelines that includes skid resistance thresholds. Moreover, skid resistance variability was also studied, with asphalt pavement being the most homogeneous. Based on the results of the research, several recommendations are proposed for the pavement to be used in the micromobility facility according to its typology. To this end, the investigatory level of skid resistance and the minimum braking distance required were also defined for each type of pavement and bike lane. The findings of this study contribute to the consideration of micromobility safety from the construction stage to the pavement management.

Road cycling, both individually and in groups, is common in Spain, where most two-lane rural roads have no cycle lanes. Due to this, and the difference in speed between drivers and cyclists, the overtaking manoeuvre is one of the most dangerous interactions. This study analyses how road geometry influences the overtaking manoeuvre performance. Field data of 1355 overtaking manoeuvres were collected using instrumented bicycles, riding along different rural road segments, and considering individual, medium and large groups of cyclists. The safety variables that characterise the overtaking manoeuvre are overtaking vehicle speed and lateral clearance. These variables have been correlated to geometric characteristics of the road, such as the type of centre line, the horizontal alignment, the speed limit, and the road cross section. Regression models have been fitted considering each cyclist group size and configuration. For individuals and medium groups, wider roads generate higher lateral clearances and lower overtaking speeds, while for large groups only the solid centre line was significant, generating lower clearances and higher speeds. Results suggest that other factors need to be considered, especially for large groups. Results offer a deeper understanding of the phenomenon by providing key points for improving road geometry design, such as widening the shoulders.

[EN] Mobility patterns and lifestyles have changed in recent years in cities worldwide, thanks to the strong rise in modes of travel commonly referred to as micromobility. In this context, e-scooters have experienced a great rise globally which has led to an increase of crashes involving this type of micromobility vehicle in urban areas. Thus, there is a need to study e-scooter users¿ behaviour and their interaction with cyclists. This research aimed at characterizing the meeting manoeuvre between micromobility users along diverse typologies of two-way bicycle track by using an in-strumented e-scooter. As a result, bicycle tracks having concrete or vegetated curb presented lower clearance distance (¿0.8 m) than those without edge elements (>1 m), with no statistically signif-icant differences found between the interaction with bicycles and e-scooters. Additionally, an online questionnaire was proposed to assess users¿ perceived risk during the meeting manoeuvre, concluding that micromobility users feel safer and more comfortable riding on pavements away from parked or moving motorized traffic, and on protected bicycle tracks., FundingThis research is part of the research project PID2019-111744RB-I00, funded by MCIN/AEI/10.13039/501100011033.