Search

This paper provides a novel Finite Element (FE) simulation to estimate the out-of-plane response of masonry prisms retrofitted with Shape Memory Alloy (SMA) stripes. Empirical data were utilized to develop the computational analysis parameters (mechanical parameters for brick, mortar, and SMA materials) as well as the calibration of the computational FE-based models. For this purpose, a complete micro-modeling approach was applied, assuming perfect contact between mortar joints and brick units. A Concrete Damage Plasticity (CDP) model was developed to define the constitutive relation between brick and mortar. SMA stripes were mortar-installed on the surface of the prisms with a perfect connection. The masonry prism’s verified computational model was utilized to generate parametric research to explore the effect of varying SMA stripe thicknesses and different SMA usage (Ni-Ti or Cu-Zn-Al). The FE study findings indicated that, independent of their material type or thickness, using SMA stripes greatly minimizes brick prism deterioration. SMA stripes greatly decreased residual displacement and plastic strains. Parametric tests, however, revealed that employing Ni-Ti SMA and increasing its thickness is more effective with respect to the masonry prism out-of-plane response than Cu-Zn-Al SMA.

The behavior of masonry shear walls reinforced with pseudoelastic Ni–Ti shape memory alloy (SMA) strips and engineered cementitious composite (ECC) sheets is the main focus of this paper. The walls were subjected to quasi-static cyclic in-plane loads and evaluated by using Abaqus. Eight cases of strengthening of masonry walls were investigated. Three masonry walls were strengthened with different thicknesses of ECC sheets using epoxy as adhesion, three walls were reinforced with different thicknesses of Ni–Ti strips in a cross form bonded to both the surfaces of the wall, and one was utilized as a reference wall without any reinforcing element. The final concept was a hybrid of strengthening methods in which the Ni–Ti strips were embedded in ECC sheets. The effect of mesh density on analytical outcomes is also discussed. A parameterized analysis was conducted to examine the influence of various variables such as the thickness of the Ni–Ti strips and that of ECC sheets. The results show that using the ECC sheet in combination with pseudoelastic Ni–Ti SMA strips enhances the energy absorption capacity and stiffness of masonry walls, demonstrating its efficacy as a reinforcing method.

For decades, among other industries, the construction sector has accounted for high energy consumption and emissions. As the energy crisis and climate change have become a growing concern, mitigating energy usage is a significant issue. The operational and end of life phases are all included in the building life cycle stages. Although the operation stage accounts for more energy consumption with higher carbon emissions, the embodied stage occurs in a time-intensive manner. In this paper, an attempt has been made to review the existing methods, aiming to lower the consumption of energy and carbon emission in the construction buildings through optimizing the construction processes, especially with the lean construction approach. First, the energy consumption and emissions for primary construction materials and processes are introduced. It is followed by a review of the structural optimization and lean techniques that seek to improve the construction processes. Then, the influence of these methods on the reduction of energy consumption is discussed. Based on these methods, a general algorithm is proposed with the purpose of improving the construction processes’ performance. It includes structural optimization and lean and life cycle assessments, which are expected to influence the possible reduction of energy consumption and carbon emissions during the execution of construction works.