Search

Plant biomass in the form of waste materials and by-products from various industries can be a valuable material for the production of composts and growing media for urban gardening. In this study, pulp and paper mill sludge, fruit-vegetable waste, mushroom spent substrate and rye straw were used to produce compost that was further used as a medium component in container cultivation of tomato. The plants were grown in containers with a capacity of 3 dm3 filled with three types of compost-based growing media supplemented with high peat, fen peat, pine bark and wood fiber. The tomato plants grown in 100% peat substrate served as controls. The plants grown in the compost-enriched media had a higher leaf greening index and percentage of ripe fruit, and exhibited an increased content of total polyphenols and flavonoids, potassium, calcium, magnesium and copper in fruit as compared with the control. The tomatoes grown in a medium consisting of 25% compost, 30% high peat, 15% low peat, 20% pine bark and 10% wood fiber reached the highest fresh fruit weight, total polyphenol content and L-ascorbic acid levels. This study demonstrated that the compost produced from natural materials from various sources was a valuable potting medium supplement with positive effects on tomato yield and nutritional value.

The fertilizer framework in the European Union has recently been reviewed by EU Regulation 1009/2019 that excluded sewage sludge from the list of the possible constituents of organic fertilizers relying on their origin, not on their quality. This paper aimed to carry out a complete characterization of sewage sludge obtained from a pharmaceutical manufacturing process (PDSS) to demonstrate that sewage sludge obtained from a standardized and controlled manufacturing process can be safely recycled as organic fertilizer. The agronomic and environmental characteristics of the PDSS product were analyzed and compared to other organic fertilizers. Its fertilizing potential was also evaluated through plant growth trials. PDSS was characterized by a high concentration of total N (6.6% w/w), which was all present in organic form. PDSS also showed a low concentration of heavy metals, an absence of pathogens and low concentrations of organic contaminants. Plant growth trials showed that the PDSS was able to improve lettuce and carrot growth (+25 and +46% of dry weight compared to the unfertilized control), as well as their physiological status. Considering all the results, the exclusion of sewage sludge relying only on its origin and not on its quality appears to conflict with the principles of the circular bioeconomy.

Pig slurry is considered a high-risk effluent that causes several environmental problems if it is not adequately managed and treated. White Iberian pig farms in the southeast of Spain treat their slurry in situ using separation, double filtration, decantation, and constructed wetland treatments. However, the pretreatment process does not successfully reduce solids, which leads to clogging in the constructed wetlands (CWs). The main objective of this research paper is to reduce the turbidity and chemical oxygen demand (COD) from the effluent to make it appropriate for CW treatment. Optimization of the coagulation–flocculation (CF) process using iron chloride and a cationic flocculent DKFLOCC-1598 was investigated by a central composite design method (CCD). The effects of coagulant concentration, pH, and flocculent on the COD and turbidity removal were evaluated. The best results were found using 0.024 mol L−1 iron chloride and 0.164 mL L−1 flocculent at pH 7.5, which reduced COD by 96% and delivered turbidity removal of 97%. Therefore, the results indicate the high efficiency of the treatment method in reducing the COD and suspended solids.

The potential of agroforestry to improve livelihoods and mitigate climate change and environmental degradation has been widely recognized, especially within the context of climate-smart agriculture. However, agroforestry opportunities have not been fully exploited because of several reasons, among which are adverse policies and legislations. However, many countries do not have a full understanding of how their policy and institutional environment may affect agroforestry development. We aim to fill this gap by looking at the particular case of Chad. The method used included examining data from: (i) literature reviews of important national and international polices, strategies, and legislation governing access to land and trees, among which are ‘La Loi 14’, Chad’s 2010 poverty reduction strategy paper, draft zero of the National Environmental Policy, (ii) interviews and focus group discussions with NGOs, government officials, and farmers, and (iii) surveys with 100 households. Results show that Chad has no specific agroforestry policy but opportunities for agroforestry can be found in some of the above-mentioned policy documents and government strategies. Most stakeholders interviewed had positive attitudes towards agroforestry, but uptake of the practice is handicapped by poor understanding of the forestry law by farmers and forestry officials. Gaps in existing laws give room for rent-seekers to collect individual (USD 272–909) and collective (USD 36–1818) access fees to trees on both forest and farmland. We propose that the government of Chad should unmask elements of agroforestry in existing policies and policy instruments to demonstrate its importance in responding to livelihood and environmental challenges in the country.

This work addresses the joint management of residual microalgae and pine wood waste through pyrolysis to obtain a solid product for its use as soil amendment and two other by-products (liquid and gaseous) that can be used for energy purposes. Two management routes have been followed. The first route is through the co-pyrolysis of mixtures of both residual materials in several proportions and the later use of their solid fraction for soil amendment. The second route is the pyrolysis of pine wood waste and its direct combination with dried residual microalgae, also using it as soil amendment. The solid fraction assessment shows that from seven solid products (biochar) three stand out for their positive applicability in agriculture as soil amendment. In addition, they also present the benefit of serving as carbon sink, giving a negative balance of CO2 emissions. However, caution is suggested due to biochar applicability being subject to soil characteristics. To ensure the sustainability of the overall process, the energy available in liquid and gaseous fractions has been assessed for covering the drying needs of the residual microalgae in both cases. These results suggest that the pyrolysis process is a sustainable way to manage specific evaluated residues and their products.

Cheese whey is a waste produced in the dairy industry which generates problems if it is dumped directly into the sewer due to its high organic load. An alternative for cheese whey management is anaerobic digestion, a biological process that transforms organic matter into biogas and digestate, two products with significant energy and agricultural potential. This work was aimed at contributing to the building of knowledge about the anaerobic degradation of cheese whey, developing a bibliometric analysis, and tracing trends in related research from 2010 up to the present, using PRISMA® to develop a systematic review based on Scopus® and using Excel® and bibliometric software (VosViewer® and RefViz®) for the identification of information. Our results show that the research around cheese whey is relatively recent and that the highest percentage of publications is from 2018 onwards. Twelve variables of the anaerobic cheese whey degradation process were identified and grouped into five factors: substrate, reactor configuration, digestate analysis, microbiological analysis, and inoculum. Likewise, it was identified that most of the anaerobic processes allow the implementation of the circular economy into the dairy sector. In conclusion, the application of anaerobic digestion in the dairy sector can help to close the productive cycles, produce biofuels, and reduce pollution.

The African sweet potato weevil, Cylas puncticollis, and fall armyworm, Spodoptera frugiperda, are insect pests of economic importance that have a negative impact on sweet potato and maize production, respectively. In this study, we aimed to evaluate the potential of Melia volkensii extracts to protect sweet potato and maize plants against damage by both insect pests. We evaluated extracts from the bark, leaves, pulp and nuts of Melia volkensii for antifeedant activity against C. puncticollis and S. exigua (used as a substitute for S. frugiperda), under laboratory conditions. Interestingly, extracts of all plant parts showed antifeedant activity. These results led us to investigate the effectiveness of nut and pulp extracts to protect sweet potato and maize crops in greenhouse conditions. Against C. puncticollis, the sweet potato plants treated with nut extracts showed the lowest tuber damage (18%) when compared to pulp extracts (30%), positive control (33%) and negative control (76%). Nut extracts, pulp extracts and positive control reduced maize leaf and whorl damage by S. frugiperda compared to the negative control. Altogether, this study highlights the potential of M. volkensii extracts and their application in integrated insect pest management

Cassava is the most widely cultivated and consumed crop in Ghana. Malnutrition is endemic in cassava-producing regions of Africa, partly due to the low micronutrient content of this crop. The aim of this study was to generate genetic information on characteristics such as total carotenoid content, dry matter content, root weight and number, and cassava mosaic disease (CMD), and their possible combination in cassava clones, using a North Carolina II breeding scheme. Five genetically diverse yellow-fleshed clones at advanced selection stages, with CMD resistance, were used as females and two high dry matter content white-fleshed clones, selected from farmers’ fields in Ghana, were used as males. Ten F1 families were generated, and evaluated at two locations in Ghana. General combining ability (GCA) mean squares were larger than specific combining ability (SCA) mean squares for harvest index, CMD, and carotenoid content, indicating additive genetic effects. The positive significant correlations that were observed between pulp color and carotenoid content, carotenoid content and CMD, pulp color and CMD, and pulp color and cortex color, make the screening of large numbers of progenies possible in the cassava breeding program. This could allow breeders to combine carotenoid content and CMD at the early breeding stages through visual assessment of pulp color and CMD symptoms. Large numbers of genotypes can be evaluated and a few can be selected to be quantified for carotenoid content at later stages of the breeding program, to save costs. One of the parents (P6), showed positive GCA effects for carotenoid content, dry matter content, CMD and storage root weight, hence could be used as a parent to generate clones that combine carotenoid content and dry matter content.

One of the principles of the circular economy requires the effective recycling of organic waste, especially since its volume is increasing from year to year. Therefore, one of the best solutions to solve this problem is the composting of organic waste. This paper presents the results of a comparative study of 10 different composts in terms of their quality. The composts varied with regard to waste materials used for composting, the adopted composting method, and the degree of compost maturity. Both biological (seed germination rate and intensity of plant root growth) and chemical methods (contents of macro- and micronutrients, presence of heavy metals, as well as the quality and quantity of humus compounds) were applied to evaluate the fertilisers, providing comprehensive characteristics of individual composts. It was found that composts prepared on the basis of sewage sludge had the highest contents of macro- and micronutrients as well as heavy metals. In addition, these composts contained the greatest amounts of humic substances, although these were of low quality. These composts also strongly inhibited seed germination and plant root growth. The least desirable chemical composition was found for the composts based on yard trimmings and household wastes prepared in home composters. These composts contained good quality humus compounds and had a positive effect on seed germination and plant root growth.

Although biochars made in laboratory seem to remove H2S and odorous compounds effectively, very few studies are available for commercial biochars. This study evaluated the efficacy of a commercial biochar (CBC) for removing H2S and odorous volatile organic compounds (VOCs). We found that the well-known Ergun equation may not be adequate in predicting pressure drop for properly sizing a ventilation system. The H2S breakthrough adsorption capacity of the CBC was 2.51 mg/g under humid conditions, which was much higher than that for dry conditions. The breakthrough capacity increased with the influent concentration of H2S. The efficacy of a pilot-scale biochar odor removal system (PSBORS) for removing 15 odorous VOCs was evaluated by placing it in a swine gestation stall continually treating the inside air for 21 days. All VOCs in the PSBORS effluent were below detection limit except for acetic acid. However, due to the very high odor threshold of acetic acid, its contribution to the odor would be minimal. It appeared that the CBC could be used to reduce both H2S and odorous VOCs with the potential of recycling the spent CBC for soil health improvement after using it for H2S and odor removal.

The digestate is a prospective biofertilizer and potential source of income for many biogas plants worldwide. However, its actual impact on the soil properties and biomass yield is still unexploited. The different digestates from eight agricultural biogas plants were researched in terms of their chemical composition and the fertilizing potential. The results obtained from digestate chemical analysis indicate that the digestate biomass had large amount of nitrogen (up to 73 g kg−1 fresh mass) and potassium (up to 25 g kg−1 fresh mass). The value of the digestate was estimated in the range of 2.88–7.89 EUR Mg−1 for liquid digestate and 7.62–13.61 EUR Mg−1 for solid digestate based on the commercial fertilizer market price of nitrogen, potassium phosphorus, organic carbon, Cu, Zn, Fe and Mg. The digestate produced at the 1 MW biogas plant is worth EUR 941–2095 per day in addition to energy sales income. The application of digestate on low-fertility land in areas close to the biogas plant allows the production of up to three-fold more biomass suitable for biogas production. The digestate’s application on semi-natural grass biomass production in the low-fertility soils near the biogas plants could be an alternative strategy for the biogas plant feedstock portfolio diversification.

The main challenge of this work is to identify a novel approach to reuse and valorize brewers’ spent grain (BSG) to produce a new source of income for the brewers in terms of self-consumption or selling goods. Therefore, this study explored the composting behavior of BSG mixed with different organic materials: wheat straw with pig slurry solid fraction and wheat straw with sheep manure, MIX1 and MIX2, respectively. The composting process was carried out in bins by comparing two different composting strategies: manual turning (MT) and static composting xxx– without turning operations (ST). During the experimental trial, BSG mixtures were chemically analyzed for pH, total Kjeldahl nitrogen, ammoniacal nitrogen, nitrate-nitrogen, total organic carbon, volatile solids, carbon to nitrogen ratio, and moisture content. Furthermore, the final composted materials were evaluated according to the physicochemical and biological limits fixed by the European regulation (2019/1009) and the Italian law (D.Lgs 75/2010). At the end of the composting process, the C/N ratio ranged from 11.6 to 15.5, the humification ratio ranged from 12.4 to 13.8 and the NH4+-N/NO3−-N ratio was lower than 0.5 indicating, in all investigated treatments, a good degree of maturation. However, as evidenced by the high pH values and low Germination Index, the sheep manure, as starting material, proved less effective than the solid fraction of pig slurry, probably due to excessive trampling and slow litter change. Finally, concerning the two composting strategies investigated, the obtained results highlighted that the composting strategy did not affect the final compost quality.

A new, simple, and rapid one-step integrated method for the biotechnology treatment of raw olive oil mill waste (OMW) is discussed. The innovations introduced involve primarily the application of microaerobic composting processes for OMW bioremediation plus the addition of both a zeolite and a tailor-made biocatalyst extremely rich in soil microorganisms. The latter operates at a wide pH range and provides, apart from soil microorganisms, nutrients to the compost, enhancement to the bio-oxidative phase and acceleration of biochemical reactions during bioremediation. The basic parameters affecting the bioprocess, i.e., electrical conductivity, pH, C/N ratio, specific weight, ash, organic matter, total organic carbon, total Kjeldahl nitrogen, microorganisms, humic substances, and total polyphenols, were monitored systematically to provide insight into the process and evaluate the product obtained. After a biotreatment of just 60 d, a significant reduction in polyphenols (91.4%) and an increased humic substances content (8%)—both serving as maturation indices—were observed. The OMW compost received is stable, free of toxic compounds and pathogens, affords a richness in cenose and a high humic substances content, both vital for soil fertility. Applications of the OMW product received, both in laboratory-scale and field cultivations, confirm its suitability as a first-class soil conditioner for organic farming.

Sustainable agricultural development depends mainly on the recycling of organic wastes to reduce environmental pollution, as well as to reduce the use of mineral fertilizers. Expired milk products are rich in organic carbon and nitrogen, so they are good raw materials for making organic fertilizers. In this study, expired milk products were converted to organic fertilizer (EDPF) by gravity and thermal treatments. The extracted EDPF was used in the nutrition of Williams banana plants under field conditions for two growing seasons. The field experiment consisted of four treatments including: C = control without N fertilization, U = traditional urea, SRU = slow-release urea, and EDPF. EDPF significantly (p &lt, 0.05) improved the growth and yield of Williams banana in comparison to U and SRU. EDPF significantly minimized the soil pH and increased the soil organic-C and cation exchange capacity compared to the other treatments. EDPF increased the total yield of bunches by 20% and 17% in the first and second years, respectively, above U and SRU. EDPF surpassed the traditional and slow-release urea in its ability to supply the banana plants with nitrogen. NH3-N loss from U, SRU, and EDPF reached 172, 132, and 100 kg N ha−1, respectively, which accounted for 34%, 26%, and 20% of the total added nitrogen. Nitrogen loss from the investigated treatments was in the order: U &gt, SRU &gt, EDPF &gt, C. EDPF significantly reduced the ammonia volatilization compared to U and SRU by reducing the soil pH and increasing the soil organic matter. The dynamic of NH3 emissions not only depends on the nitrogen form but also on climatic conditions and concentrations of NH4+ in the soil solution. Protecting the ecosystem and maximizing the benefits of wastes utilization can be done through the recycling of expired dairy products to organic fertilizers.

This study aimed to quantify the extent of heavy metal, non-metal and metalloid levels in the Campomanesia adamantium pulp obtained from an area crossed by road experiencing high large vehicle traffic and intensive agriculture modern farming, to monitor the health risks associated with pulp consumption by humans. For this purpose, in three spots located within this area, ripe fruits were collected on the roadside, bush and farm-margin. Pulp samples were digested by microwave-assisted equipment, and chemical elements were quantified by ICP OES. The concentrations of K, Pb, Se, Fe, Mo, Zn, Co, Ni and Mn in the pulp collected in roadside/bush points showed statistical differences (p &lt, 0.05). The heavy metals and metalloid concentrations that exceeded FAO/WHO standards were ordered Pb &gt, As &gt, Mo &gt, Co &gt, Ni &gt, Mn &gt, Cr. Therefore, among these metalloid and heavy metals, As, Pb and Cr were found to be higher in farm-margin &gt, roadside &gt, bush (1.5 × 10−3, 1.1 × 10−3 and 6.2 × 10−4), respectively. Therefore, As is the most important metalloid with higher levels in farm-margin, roadside and bush (1.5 × 10−3, 1.0 × 10−3 and 6.0 × 10−4 &gt, 10−6–10−4 and 3.33, 2.30 and 1.34 &gt, 1), respectively, to total cancer risk and hazard quotient, if 10 g daily of pulp are consumed.

Developing a green and sustainable method to upgrade biogas wastes into high value-added products is attracting more and more public attention. The application of solid residues as a performance enhancer in the manufacture of biofilms is a prospective way to replace conventional plastic based on fossil fuel. In this work, solid digestates from the anaerobic digestion of agricultural wastes, such as straw, cattle and chicken manures, were pretreated by an ultrasonic thermo-alkaline treatment to remove the nonfunctional compositions and then incorporated in plasticized starch paste to prepare mulching biofilms by the solution casting method. The results indicated that solid digestate particles dispersed homogenously in the starch matrix and gradually aggregated under the action of a hydrogen bond, leading to a transformation of the composites to a high crystalline structure. Consequently, the composite biofilm showed a higher tensile strength, elastic modulus, glass transition temperature and degradation temperature compared to the pure starch-based film. The light, water and GHG (greenhouse gas) barrier properties of the biofilm were also reinforced by the addition of solid digestates, performing well in sustaining the soil quality and minimizing N2O or CH4 emissions. As such, recycling solid digestates into a biodegradable plastic substitute not only creates a new business opportunity by producing high-performance biofilms but also reduces the environmental risk caused by biogas waste and plastics pollution.

The study relates to the use of automated plant protection systems in agriculture. The article presents a proprietary automated mobile platform with an aerosol generator of hot mist. Furthermore, the cause of the loss of a chemical preparation in the spraying of plant protection products on the tree crown was determined in the course of field research. A statistical analysis of the results of experiment was carried out and the effect of droplet size on leaf coating density was determined. The manuscript presents a diagram of the degree of penetration of the working solution as it drops into the crown of the tree, as well as a cross-sectional graph of the permeability of the spray from the projection of the fruit tree crown. The most effective modes of operation of the automated mobile platform for spraying plant protection products with a mist generator aggregate were established. Analysis of the results shows that the device meets the spraying requirements of the procedure for spraying plant protection products. The novelty of this research lies in the optimal modes identified by movement of the developed automated mobile platform and the parameters of plant treatment with protective equipment when using a hot mist generator. The following mode parameters were established: the speed of the automated platform was 3.4 km/h, the distance to the crown of the tree was 1.34 m, and the flow rate of the working fluid was 44.1 L/h. Average fuel consumption was 2.5 L/h. Effective aerosol penetration reduced the amount of working fluid used by up to 50 times.

Limestone flour is used in a variety of industrial sectors such as power and heat generation, glass-making, paper-making, the construction industry and construction materials manufacturing, the production of agriculture, plastics and rubber goods, as well as coal mining, and environmental protection. This paper aims to characterize and interpret the limestone flour supply and demand trends in the main applications in Poland in the last decade. In order to track the changes of domestic consumption for this commodity, its major users have been surveyed along with analyses of data from the Statistics Poland (GUS). The results showed that during 2009&ndash, 2018 the coal-fired power plants became the biggest customer of limestone flour utilized as a sorbent in the wet flue gas desulfurization method (FGD). This method has been implemented in the vast majority of Polish power plants. It is estimated that in the last decade the total annual production capacity of limestone flour at the milling plants in Poland increased by 1.5 million tons, to around 6.0 million tons. In the forthcoming years, this is expected to continue to increase despite EU restrictions on fossil fuel use (especially hard coal and lignite). Other promising areas of future growth are: for limestone flour of medium quality&mdash, the construction materials manufacturing and the construction industry itself, for limestone flour of the highest quality&mdash, the glass industry, while for fine-grained limestone flour of high-quality&mdash, the plastics and rubber industries. In terms of resource security, it is worth noting that Poland is a country rich in limestone deposits. However, only some of them, that is, limestone rock varieties of the Jurassic and Devonian ages from the Kielce vicinity in central Poland are suitable for the production of high-quality limestone flour for the needs of the mentioned industries. The paper analyses the potential of the limestone flour production from the available limestone rock deposits with respect to the current and future needs of the domestic market in Poland.

In recent years, production of biohydrogen and biomethane (or a mixture of these; biohythane) from organic wastes using two-stage bioreactor have been implemented by developing countries such as Germany, USA and the United Kingdom using the anaerobic digestion (AD) process. In Thailand, biohythane production in a two-stage process has been widely studied. However, in Malaysia, treating organic and agricultural wastes using an integrated system of dark fermentation (DF) coupled with anaerobic digestion (AD) is scarce. For instance, in most oil palm mills, palm oil mill effluent (POME) is treated using a conventional open-ponding system or closed-digester tank for biogas capture. This paper reviewed relevant literature studies on treating POME and other organic wastes using integrated bioreactor implementing DF and/or AD process for biohydrogen and/or biomethane production. Although the number of papers that have been published in this area is increasing, a further review is needed to reveal current technology used and its benefits, especially in Malaysia, since Malaysia is the second-largest oil palm producer in the world.

Several economies around the world are using second-generation (2G) ethanol produced from agricultural residues, like sugarcane straw and bagasse, as a sustainable solution to replace petroleum products. Since first-generation (1G) ethanol uses the sugars of sugarcane, an integrated 1G–2G production would enable the production of more ethanol from the same amount of sugarcane without leading to increased use of arable land. The ethanol production process is complex, involving different high-energy consumption operations such as evaporation and distillation. The economic competitiveness of this process depends heavily on the amount of thermal and electrical energy produced using sugarcane straw and bagasse as input. Thus, the objective of this study was to use the mean-variance methodology to determine the optimal allocation of residual sugarcane biomass between 2G ethanol and bioelectricity productions, with simultaneous objectives of maximizing the return and minimizing the risk for investors of this sector. In this paper, four scenarios are analyzed. The first one is the base scenario that represents the current state of production costs and investments. scenarios 2, 3, and 4 considered four cuts of 10%, 20%, and 40% in the production cost of ethanol 2G, respectively. The results show the optimum biomass allocations and the growth rates of returns as a function of risk growth. It can be concluded that from scenario 4, the production of 2G ethanol becomes financially advantageous for the investor, presenting greater returns with smaller risks.

Dry anaerobic digestion technology (DADT) is considered a highly feasible way to treat agricultural straw waste; however, most practical operations are always in low efficiency, due to the poor fluidity behavior and complex lignocellulosic structure of straw, which is not easily decomposed by anaerobic bacteria. Hence, it is necessary to further investigate the operation boundary, in order to increase biogas production efficiency for effective applications. In this paper, typical DADTs are reviewed and their suitability for application in China is analyzed. The advantages and disadvantages of different anaerobic digestion processes are evaluated considering pretreatment, organic loading rate, anaerobic digestion temperature, and homogenization of the feedstock and inoculate. The suitability of the DADTs is evaluated considering the accessibility of straw resources and the convenience of biogas use. It is concluded that batch anaerobic digestion processes would be more suitable for the development of southern China due to the prevalence of small-scale agriculture, while continuous anaerobic digestion would be preferable in the north where large-scale agriculture is common. However, the DADTs discussed here need to broad application in China.

Agriculture is an important sector of the economy, but this industry consumes significant amounts of water, which is a precious and limited natural resource. Irrigation techniques and efforts to mitigate water usage influence the growth, survival, and yield of crops. However, superabsorbent polymers in combination with fertilizers can be employed to obtain sustained release of nutrients and improved water retention capacity of the soil. Despite significant recent progress in this area involving synthetic polyacrylate hydrogels, there are no industrially applicable solutions exhibiting similar performance using natural biopolymers or synthetic polymers enriched with natural components. This review focuses on biodegradable chitosan-based hydrogels (both natural and semi-synthetic), and discusses their potential agricultural and horticultural applications. The methods for synthesizing hydrogels via physical or chemical crosslinking, and the resulting functional properties of recently reported hydrogels, such as water retention and release of active ingredients, are presented herein.

In this study, we examined a Chlorella vulgaris-based system as a potential solution to change liquid waste, such as blackwater, into valuable products for agriculture while protecting waters from pollution without technical demanding pre-treatment. To evaluate the possibility of nutrient removal and biomass production from raw blackwater, four blackwater dilutions were tested at lab-scale: 50%, 30%, 20%, and 10%. The results showed that even the less diluted raw blackwater was a suitable growth medium for microalgae C. vulgaris. As expected, the optimum conditions were observed in 10% blackwater with the highest growth rate (0.265 d&minus, 1) and a nutrient removal efficiency of 99.6% for ammonium and 33.7% for phosphate. However, the highest biomass productivity (5.581 mg chlorophyll-a L&minus, 1 d&minus, 1) and total biomass (332.82 mg dry weight L&minus, 1) were achieved in 50% blackwater together with the highest chemical oxygen demand removal (81%) as a result of the highest nutrient content and thus prolonged growth phase. The results suggested that the dilution factor of 0.5 followed by microalgae cultivation with a hydraulic retention time of 14 days could offer the highest biomass production for the potential use in agriculture and, in parallel, a way to treat raw blackwater from source-separation sanitation systems.

Wine production is one of the most important agricultural activities around the world. The production of wine involves the use of a large number of valuable resources, such as water, fertilizers, and other organic products. Moreover, it produces a large amount of wastewater and organic waste that must be treated adequately to avoid contaminating the areas of production. The nature of the waste produced depends very closely on the specific vinification procedures, which also affect the physical–chemical properties of the residual material generated, whose characteristics determine its subsequent use and even condition the subsequent specific recovery circuit in which can be integrated.

Organic matter is an indispensable element of soil. Its quantity and quality affect its properties, e.g., structure, buffering, sorption capacity, air–water relations, and thermal properties. The purpose of the research was to assess greenhouse gas (GHG) emissions in soybean cultivation, fertilized with biochar from various crops. Two experimental factors were included: the dose of biochar and the type of biochar used as per raw material used in its production. The adopted functional unit was 1 ton of soybeans. To reach the adopted goal, a strict field experiment was carried out. The total amount of GHG emitted by the cultivation was calculated according to the ISO 14040 and ISO 14044 standards. The system boundaries included: GHG emissions from fertilizers and seeds used, GHG emissions related to biochar production, emissions related to fossil fuel combustion, and emissions related to the decomposition of crop residues and soil organic matter and the decomposition of biochar. The results of the research indicate a significant potential of biochar to reduce GHG emissions in agricultural production. From the environmental and production perspective, the addition of biochar at 60 Mg ha−1 is the most advantageous. A further increase in the addition of biochar was related to a decrease in plant yield and an increase in GHG emissions per functional unit of the product. The use of biochar in soybean cultivation resulted in a 25% reduction in GHG emissions compared to the object without the biochar addition. The amount of GHG emissions for soybeans ranged from 846.9 to 1260.1 kg of CO2/Mg. The use of biochar from forest biomass resulted in a higher yield, 12% on average, compared to sunflower husk biochar. The introduction of biochar to soils can be an effective improvement in the economic and environmental efficiency of plant production, as it increases the use of nutrients by the plant and intensifies carbon sequestration in soils.

In this review, studies (n = 41) were searched in which the compounds and contents were determined for whole fig fruit, peel, leaves and pulp, the types of fig-based products were identified and their total phenols and antioxidant capacity as well as the potential uses of different extracts of fig parts were analyzed. There is a need to reduce the fruit’s environmental impacts (zero waste), and bioactive compounds from fig fruits present a high added value as functional ingredients. Focusing on fig by-products (peel, seeds, no-optimal fruits and leaves), individual compounds and/or extracts can increase the functional, nutritional and techno-functional properties of food products such as additives. A high number of phenolic compounds was found in whole fruit (n = 19), peel (n = 26), pulp (n = 24) and leaves (n = 42). Quercetin-3-O-rutioside was reported as the major individual phenolic compound in whole figs, while cyanidin-3-rutinoside, epicatechin and caftaric acid were the highest compounds in peel, pulp and leaves, respectively. A potential strategy could be the development of novel additives and/or ingredients for food industry from fig by-products. Therefore, the use and valorization of the waste material produced during fig processing should be further investigated.

Laccases are copper-containing oxidase enzymes found in many fungi. They have received increasing research attention because of their broad substrate specificity and applicability in industrial processes, such as pulp delignification, textile bleaching, phenolic removal, and biosensors. In comparison with traditional submerged fermentation (SF), solid-state fermentation (SSF) is a simpler technique for laccase production and has many advantages, including higher productivity, efficiency, and enzyme stability as well as reduced production costs and environmental pollution. Here, we review recent advances in laccase production technology, with focus on the following areas: (i) Characteristics and advantages of lignocellulosic agricultural wastes used as SSF substrates of laccase production, including detailed suggestions for the selection of lignocellulosic agricultural wastes; (ii) Comparison of fungal laccase production from lignocellulosic substrates by either SSF or SF; (iii) Fungal performance and strain screening in laccase production from lignocellulosic agricultural wastes by SSF; (iv) Applications of laccase production under SSF; and (v) Suggestions and avenues for future studies of laccase production by fungal SSF with lignocellulosic materials and its applications.

Soil amendments are used to improve soil quality, thereby enhancing plant growth and health. Efforts have been made to replace synthetic chemical enhancers. It is also preferable to not use natural products such as peat moss, the harvesting of which can be harmful to marine ecosystems. Viable replacements include worm castings, which can contribute beneficial microbes, as well as physicochemical amendments. Another potential soil amendment is the compost produced from sugarcane processing byproducts. While the texture of these two materials is not ideal for even dispersal onto fields, the addition of biochar improves the texture. Previous work demonstrated that blending them with biochar from sugarcane byproducts added physicochemical benefits, while not quantitatively reducing the microbial load, even after storage. Microbial populations of the blends in the present study were found to (1) contain taxonomic groups that contribute to plant health and (2) not contain human pathogens. Based on the quantitative and qualitative microbial analyses, it has been determined that 50% or less biochar in a blend will allow maintenance of beneficial microbes in stored samples.

The need to produce an ever-increasing quantity of material products and food resulting from the planet globalization process has contributed to the spread of modern agriculture based on a linear production resulting in the generation of tons of waste. This huge amount of waste is generally accumulated in landfills, causing different environmental problems. Hence, researchers moved on to study the processes used to recover agro-industrial by-products within a circular and sustainable bio-economy concept. A systematic quest on Scopus and PubMed databases was performed to identify the data available to date on recycling agro-industrial by-products of Olea europaea L. This systematic review summarizes the knowledge regarding the use of olive trees by-products for producing animal feed, biocomposites, bioethanol, cellulose pulp, activated carbon, and as a fuel source for energy production. Furthermore, the data regarding the potential biological activity of extracts from olive roots, wood, bark, and pruning were analyzed. Olive trees by-products are, indeed, rich in molecules with antioxidant, antimicrobial, cardioprotective, and anticancer activity, representing a promising candidate for treat several human diseases.

Recovering and recycling phosphorus (P) from sewage sludge ash (SSA) for the purpose of P fertilizer production contributes to reducing the input of mined phosphate-minerals and closing of the P cycle. However, direct use of SSA as fertilizer is often a questionable strategy due to its low nutrient use efficiency. In addition, the environmental risk potential of utilizing SSA in agriculture is still unclear, in particular potential toxic element (PTE) contamination. In this study, a mixture of SSA and rock phosphate was used at lab-scale superphosphate (SP) production. P availability of the final product and PTE contamination (Cd, Cr, Cu, Zn, Pb, Ni) in soil and crop was investigated through maize (Zea mays L.) cultivation. Results showed that the application of SP that was produced by 25% SSA replacement did not affect the growth, P uptake, and PTE content in aboveground maize compared to the application of SP produced without SSA replacement. However, significant inputs of SP with SSA replacement may decrease the solid-soil solution partitioning of Cu, Ni and Pb in the long-term. Separation of municipal/industrial sludge and PTE removal technology are necessary to be implemented prior to the use of SSA as a secondary raw material in P-fertilizer production.

This study was conducted to analyze the effect of molybdenum (Mo) on the level of macronutrients (Mg, K, Ca), micronutrients (Na, Zn, B, Mo, Mn, Fe, Co, Ni, Cu) and toxic elements (Cd, Sn, As, Cr, Hg, Pb) in leaves and fruit tissues (peel, pulp &amp, seed) of loquat using inductively coupled plasma-mass spectrometry (ICP-MS). Fruits were obtained from a loquat orchard located in Fujian (Yun Xiao/Zhangzhou). Loquat leaves showed 3.99, 23.90, 57.68 and 9.79-fold increase in the concentrations of Mg, K, Ca and B as affected by exogenously applied Mo, while a significant (p ≤ 0.05) reduction was observed in Na, Mo, Mn, Co, Ni, Cu, Sn, As, Cr, Hg, and Pb contents. In fruit peel, Mo induced 1.05, 1.56, 2.26, 1.15, 1.39, 1.30 and 1.89-fold increase in Mg, K, Na, Zn, B, Co and Ni, respectively, and Mo, Mn, Fe, Cu, Cr, and Pb contents were reduced. Fruit pulp showed elevated contents of Na, B, Co, Ni, and Sn by 25.65, 26.57, 70.09, 12.33 and 0.99%, respectively, and decreased concentrations of Mg, K, Ca, Zn, Mo, Mn, Fe, Cu, Cd, and Cr. Similarly, in loquat seeds, under the influence of Mo application, levels of K, Na, Zn, Fe, and Cr were uplifted by 14.75, 41.54, 12.71, 536.47 and 656.27%, respectively, while Mg, Ca, Mn, Co, Cu, Sn, and Hg were reduced significantly (p ≤ 0.05). Overall, mineral concentrations detected in the leaves and fruit tissues of loquat were greatly influenced by the application of Mo. Although the concentration of Sn in fruit pulp was increased by the foliar application of Mo, the fruits were under safe limits for human consumption.

The efficacy of C4 grasses as feedstocks for liquid fuel production and their climate mitigation potential remain unresolved in the tropics. To identify highly convertible C4 grasses, we measured final fuels and postprocess biomass produced in two laboratory-scale conversion pathways across 12 species and varieties within the Poaceae (grass) family. Total mass, carbon, and energy in final fuels and postprocess biomass were assessed based on field mass and area-based production. Two lignocellulosic processes were investigated: (1) anaerobic digestion (AD) to methane and (2) hot water pretreatment and enzymatic hydrolysis (HWP-EH) to ethanol. We found AD converted lignocellulose to methane more efficiently in terms of carbon and energy compared to ethanol production using HWP-EH, although improvements to and the optimization of each process could change these contrasts. The resulting data provide design limitations for agricultural production and biorefinery systems that regulate these systems as net carbon sources or sinks to the atmosphere. Median carbon recovery in final fuels and postprocess biomass from the studied C4 grasses were ~5 Mg C ha−1 year−1 for both methane and ethanol, while median energy recovery was ~200 MJ ha−1 year−1 for ethanol and ~275 MJ ha−1 year−1 for methane. The highest carbon and energy recovery from lignocellulose was achieved during methane production from a sugarcane hybrid called energycane, with ~10 Mg C ha−1 year−1 and ~450 MJ ha−1 year−1 of carbon and energy recovered, respectively, from fuels and post-process biomass combined. Carbon and energy recovery during ethanol production was also highest for energycane, with ~9 Mg C ha−1 year−1 and ~350 MJ ha−1 year−1 of carbon and energy recovered in fuels and postprocess biomass combined. Although several process streams remain unresolved, agricultural production and conversion of C4 grasses must operate within these carbon and energy limitations for biofuel and bioenergy production to be an atmospheric carbon sink.

The growing demand of microalgal biomass for biofuels, nutraceuticals, cosmetics, animal feed, and other bioproducts has created a strong interest in developing low-cost sustainable cultivation media and methods. Agricultural and food residues represent low-cost abundant and renewable sources of organic carbon that can be valorized for the cultivation of microalgae, while converting them from an environmental liability to an industrial asset. Biochemical treatment of such residues results in the release of various sugars, primarily glucose, sucrose, fructose, arabinose, and xylose along with other nutrients, such as trace elements. These sugars and nutrients can be metabolized in the absence of light (heterotrophic) or the presence of light (mixotrophic) by a variety of microalgae species for biomass and bioproduct production. The present review provides an up-to-date critical assessment of the prospects of various types of agricultural and food residues to serve as algae feedstocks and the microalgae species that can be grown on such residues under a range of cultivation conditions. Utilization of these feedstocks can create potential industrial applications for sustainable production of microalgal biomass and bioproducts.