Search

The longwall mining method with gob-side entry retaining via roof cutting is a new underground coal mining method which has the characteristics of a high resource recovery ratio and environmental friendliness. Due to the complexity of this method, the research method of case-based dynamic on-site monitoring, analysis, adjustment, and optimization is usually adopted. Based on a roadway retaining via roof cutting project, in addition to the traditional indirect monitoring method of hydraulic support pressure, this study innovatively establishes a direct monitoring method for roof caving by monitoring the gangue pressure in the goaf, which provides data for the roof cutting effect and offers a new method for studying the overlying strata movement. In the project, a comprehensive monitoring and analysis system was established, including gangue pressure, cable bolt stress, bracket pressure, roadway deformation, and roof separation, which was used to dynamically analyze the effect of roof cutting and optimize the support design. The results show that the pressure of the hydraulic support close to the roof cutting is low, indicating that roof cutting is favorable in the roadway retaining mining method. The roadway deformation in the advanced abutment pressure area of the working face is small. The mining-induced stress caused by the collapse and compaction of the overlying strata in the goaf is the dominant factor affecting the effect of roadway retaining, especially in the 50–100 m range behind the working face, where the dynamic load causes high bearing capacity of the support elements, large roadway convergence, and roof separation. Temporary support and supplementary reinforcement should be added when necessary. The monitoring system presented in this study is highly comprehensive, simple, reliable, and low in cost, providing a reference for roof cutting roadway retaining projects and roof caving-related studies. [ABSTRACT FROM AUTHOR]

Improving coal resource mining rates has long been a focus of coal industry research. The gob-side entry retaining by roof cutting (GERRC) is a new coal mining technology that has gained popularity in China due to its high mining rate and safety. Based on the GERRC technology, the precise technical procedure is elaborated, and the fundamental idea of pressure relief is explored through creating a structural mechanics model of the surrounding rock in this paper. The results of mechanical analysis show that the primary mechanism of roof pressure release is to weaken the integrity of the roof, thereby reducing the ultimate bending moment of the rock stratum. In addition, an additional strategy for pressure release is suggested in this research, involving the weakening of the roof rock by the creation of dense pressure-released holes. The results of the engineering field experimentation demonstrate that the dense pressure-released holes can completely replace the conventional blasting technology of the past to achieve the effect of releasing the roof pressure, thus avoiding the use of hazardous and challenging-to-obtain explosives and demonstrating safety, reliability, and feasibility. [ABSTRACT FROM AUTHOR]

In this paper, roof-cutting technology of directional energy-cumulative presplitting blasting is taken as the research object. Through the numerical simulation software Ansys/Ls-dyna3D, the process of energy-cumulative blasting and non-cumulative blasting is simulated and analyzed by using the ALE algorithm. Moreover, the evolution processes of tensile strain energy, detonation stress wave of explosives, stress state of rock mass, and rock crack damage cumulative are compared in two conditions. In the energy cumulative state, the detonation wave acts centrally on the hole wall in the energy cumulative direction to form an initial crack, and then under the action of the jet of energy cumulative, the crack continues to propagate until it runs through. In the non-energy cumulative state, the crack propagates uniformly around the hole wall, forming irregular short cracks. The simulation is verified by the field test, and the law of crack propagation is the same with the simulation. Therefore, directional energy-concentrated presplitting blasting has good practicability in a roof presplitting operation. [ABSTRACT FROM AUTHOR]

In the gob-side entry retaining by roof cutting (GERRC) technique, pressure is offloaded via directional roof cutting, and a roadway is automatically formed due to the ground pressure and rock-breaking expansion. To improve the application of the theory and technical system of GERRC in the Karst area in Southwest China, this research studies the key technology of GERRC in a high gas outburst coal seam, based on the engineering background of the 39114 working face of the Honglin coal mine. According to the geological conditions of the 39114 working face, by means of formula calculation, UDEC numerical modeling, and on-site drilling peeping, the optimal roof-cutting parameters suitable for the 39114 working face were determined: the roof cutting height was 7 m, the roof cutting angle was 15°, and the spacing of pre-splitting blasting holes was 600 mm. Additionally, the above roof-cutting parameters have achieved good results in the engineering practices of the 39114 transportation roadway, which shows that the technology of GERRC is feasible in high gas outburst mines and achieves the goal of safe and efficient mining. [ABSTRACT FROM AUTHOR]

The problem of strong ground pressure caused by thick and hard roofs in coal mine stopes has become more prominent. Blasting roof cutting and pressure relief are effective technical ways to solve this engineering problem. The key to achieving roof cutting and pressure relief is the evolution and penetration of cracks between blasting roof cutting holes in a mining stress environment. To solve this problem, research on the evolution of cracks between blasting roof cutting holes in a mining stress environment is being conducted. Along with specific engineering examples, the mechanical effect of blasting dynamic load in the surrounding rock medium between holes in a mining stress environment is analyzed using the research methods of field investigation, blasting simulation, and mechanical analysis. The fracture evolution law between blasting roof cutting holes under the conditions of different hole diameters and spacings, confining pressure environments, and rock mass strengths is analyzed using the univariate comparative analysis method. The research shows that the superposition effect of blasting dynamic load between adjacent blastholes in the transmission process leads to the "X" type penetration evolution of surrounding rock fracture area and fracture area between blastholes. Among them, the blasting effect of a hole diameter of 70 mm and a hole spacing of 0.8 m is best. When designing the blasting roof cutting scheme, we should pay attention to the key factors such as hole diameter and hole spacing. The hole spacing is particularly critical to the effect of roof cutting and crack formation, whereas the confining pressure and rock mass strength have little impact on the expansion and development of blasting cracks, which can be listed as secondary factors for comprehensive analysis in design. According to the transmission law of blasting dynamic load between holes, the critical criterion of blasting top clearance penetration under mining stress environment is deduced. Four important factors affecting blasting top cutting effect are simulated and studied for optimizing the design of roof cutting scheme. Practical engineering application results show that the blasting roof cutting scheme achieves a good seam- forming effect and creates good initial conditions for thick and hard roof cutting. It can serve as a reference for the decision making of blasting top caving technology under similar engineering conditions. [ABSTRACT FROM AUTHOR]

This article focuses on the energy density alteration during non-pillar mining method of goaf-side entry retaining by roof cutting (GERRC) and adjacent working face mining. We also studied the support control strategy of goaf-side roadway. Numerical calculation model is established, and the parameters of the model are verified by the measured advance abutment pressure and numerical solution. Based on the numerical model, the energy density during mining is studied. It is found that the whole energy evolution pattern of the goaf side entry during the two adjacent working face mining includes: the original rock energy, the advance energy of the current working face, the dynamic lateral abutment energy caused by strata movement, the lateral abutment energy of the adjacent working face. The support body failure and surrounding rock large deformation phenomenon often occur in goaf side roadway, which is influenced by multiple energy disturbances. Research shows that strong stress disturbance of surrounding rock generates in front of the working face 23 m and behind of working face 60 m in GERRC method. In the second goaf-side entry retaining, the range is in front of the working face 47 m. The evolution law of energy field puts forward the strategy of using the high constant resistance and large deformation (CRLD) anchor cable and procured preferable effect. [ABSTRACT FROM AUTHOR]