Search

Autonomous vehicles are rapidly emerging as a crucial sector within the automotive industry. Several companies are investing in the development and enhancement of technologies, which presents challenging problems in the context of robotics and control. In particular, this work primarily focuses on the creation of an autonomous vehicle architecture utilizing the robotic operating system (ROS2) framework, accompanied by advanced control algorithms. In order to facilitate the development and implementation of lateral vehicle dynamics controllers, a reduced-size automated car available in GIPSA-Lab is used as an experimental platform. The objective is to design robust controllers capable of achieving optimal tracking and stability. Accordingly, this problem is tackled under different robust control syntheses, considering the H ∞ approach: using linear time-invariant (LTI) and linear parameter-varying (LPV) model representations. Several simulation and experimental results are included to demonstrate the efficiency of the controllers. [ABSTRACT FROM AUTHOR]

This article proposes a model predictive control (MPC) strategy for a quadrotor drone trajectory tracking based on a compact state-space model based on a quasi-linear parameter varying (qLPV) representation of the nonlinear quadrotor. The use of a qLPV representation allows for faster execution times, which can be suitable for real-time applications and for solving the optimization problem using quadratic programming (QP). The estimation of future values of the scheduling parameters along the prediction horizon is made by using the planned trajectory based on the previous optimal control actions. The performance of the proposed approach is tested by following different trajectories in simulation to show the effectiveness of the proposed control scheme. [ABSTRACT FROM AUTHOR]

In this paper, we present a practical approach to address the vehicle lateral control problem. The proposed method can overcome practical problems associated with vehicle lane changes on highways. The vehicle state with respect to the road, which is called lateral offset, jumps in camera vision sensors when the vehicle changes lanes. Thus, in this study, we solve the state jump problem by translating it into a new domain called the cylinder domain. In addition, we proposed the design of a parameter-varying controller to overcome the nonlinear term of vehicle dynamics by considering it as a varying parameter. The proposed method does not consider the lateral offset jump when changing lanes. Furthermore, its significant advantage in terms of computation time makes it suitable for implementation in low-cost electronic control units (ECUs). The proposed algorithm is validated using MATLAB/Simulink with the vehicle dynamics analysis program CarSim. [ABSTRACT FROM AUTHOR]

The active suspension system of a vehicle manipulated using electro-hydraulic actuators is a challenging nonlinear control problem. In this research work, a novel Linear Parameter Varying (LPV) State-Space (SS) model with a fictional input is proposed to represent a nonlinear half-car active suspension system. Four different scheduling parameters are used to embed the nonlinearities of both the suspension and the electro hydraulic actuators to represent its nonlinear behavior. A recursive least squares (RLS) algorithm is used to predict the future behavior of the scheduling parameters along the prediction horizon. A Model Predictive Control-Linear Quadratic Regulator (MPC-LQR) is implemented as the control strategy and, to ensure stability, Quadratic Stability conditions are imposed as Linear Matrix Inequalities (LMI) constraints. Furthermore, the inclusion of attraction sets to overcome the conservative performance imposed by the Quadratic Stability conditions is included, as well as a terminal set were the switching between the MPC and the LQR controller is made. Simulations results for the half-car active suspension model over a typical road disturbance are tested to show the effectiveness of the proposed MPC-LQR-LPV controller with quadratic stability conditions in terms of comfort and road-holding. [ABSTRACT FROM AUTHOR]

The control of an automotive suspension system by means of a hydraulic actuator is a complex nonlinear control problem. In this work, a linear parameter varying (LPV) model is proposed to reduce the complexity of the system while preserving the nonlinear behavior. In terms of control, a dual controller consisting of a model predictive control (MPC) and a Linear Quadratic Regulator (LQR) is implemented. To ensure stability, quadratic stability conditions are imposed in terms of Linear Matrix Inequalities (LMI). Simulation results for quarter-car model over several disturbances are tested in both frequency and time domain to show the effectiveness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

This paper develops a model predictive controller (MPC) for constrained nonlinear MIMO systems subjected to bounded disturbances. A linear parameter varying (LPV) model assists MPC in dealing with nonlinear dynamics. In this study, the nonlinear process is represented by an LPV using past input–output information (LPV-IO). Two primary objectives of this study are to reduce online computational load compared with the existing literature of MPC with an LPV-IO model and to confirm the robustness of the controller in the presence of disturbance. For the first goal, a recurrent neural network (RNN) is employed to solve real-time optimization problems with lower online computation. Regarding robustness, a new control law is developed, which comprises a fixed control gain (K) and a free perturbation ( C) . The proposed method enjoys a shrunken conservatism owing to the finding of a larger possible terminal region and using free control moves. The strategy is examined in an alkylation of benzene process and displays outstanding performance in both setpoint tracking and disturbance rejection problems. Moreover, the superiority of RNN over three conventional optimization algorithms is underlined in terms of MSE, the average time for solving the optimization problem, and the value of the cost function. [ABSTRACT FROM AUTHOR]

This paper presents an economic reliability-aware model predictive control (MPC) for the management of drinking water transport networks (DWNs). The proposed controller includes a new goal to increase the system and components reliability based on a finite horizon stochastic optimization problem with joint probabilistic (chance) constraints. The proposed approach is based on a single-layer economic optimization problem with dynamic constraints. The inclusion of components and system reliability in the MPC model using an Linear Parameter Varying (LPV) modeling approach aims to maximize the availability of the system by estimating system reliability. On the other hand, the use of a LPV-MPC control approach allows the controller to consider nonlinearities in the model in a linear like way. Moreover, the resulting MPC optimization problem can be formulated as a Quadratic Programming (QP) problem at each sampling time reducing the computational burden/time compared to solving a nonlinear programming problem. The use of chance-constraint programming allows the computation of an optimal strategy with a pre-established risk acceptability levels to cope with the uncertainty of the demand forecast. Finally, the proposed approach is applied to a part of the water transport network of Barcelona for demonstrating its performance. The obtained results show that the system reliability of the DWN is maximized compared with the other approaches. [ABSTRACT FROM AUTHOR]