Search

This paper presents the development of a four-port dual-band dual-polarized antenna for transmitting/receiving (Tx/Rx) applications in Ku-band satellite communications. The antenna consists of two antenna elements sharing a common radiating aperture, a low-band element formed by an L-probe proximity-fed square-ring radiator for operation at the Rx band of 10.7–12.75 GHz, and a high-band element realized by a stacked-patch radiator for operation at the Tx band of 13.75–14.5 GHz. Within a compact multilayer structure, the antenna achieves wide dual-band operation, with each band having the ability to simultaneously operate with dual polarization. An antenna prototype is fabricated and tested to verify its performance. The experimental results show that the proposed antenna achieves an impedance bandwidth of 9.28–12.96 GHz (13.21–15.32 GHz), an isolation value between two orthogonal polarizations of 12 dB (12.4 dB), and a peak gain of 6.63 dBi (5.42 diBi) at the low band (high band). Tx/Rx isolation of more than 14 dB is achieved in both the Rx band and Tx band. [ABSTRACT FROM AUTHOR]

In this letter, a dual-polarized metal Vivaldi phased array antenna composed of independent structural elements is proposed, covering 6–18 GHz. By designing Vivaldi elements with a flexible and complementary structure, arrays of arbitrary shapes and scales can be constructed. The resonance caused by structural discontinuity is critically studied and eliminated to ensure good performance across the entire band. The antenna elements are fed by 50-Ohm SSMP connectors and manufactured from 2A12 aluminum alloy. An array prototype consisting of 8 × 8 dual-polarized metal has been fabricated and tested with active transmit/receive (T/R) modules to demonstrate the design concept. The array exhibits excellent beam-scanning characteristics in both the E-plane and H-plane, within the scanning range without grating lobes, which shows good agreement with the simulated results. The measured gain results are within the range of 15.2 to 24.8 dBi, and the aperture efficiencies are greater than 91% in the entire operating band. The wideband antenna technology involved in this study can effectively help increase the capacity of communication systems and meets the intentions of the Special Issue. [ABSTRACT FROM AUTHOR]

Conducting landslide recognition research holds notable practical significance for disaster management. In response to the challenges posed by noise, information redundancy, and geometric distortions in single-orbit SAR imagery during landslide recognition, this study proposes a dual-polarization SAR image landslide recognition approach that combines ascending and descending time-series information while considering polarization channel details to enhance the accuracy of landslide identification. The results demonstrate notable improvements in landslide recognition accuracy using the ascending and descending fusion strategy compared to single-orbit data, with F1 scores increasing by 5.19% and 8.82% in Hokkaido and Papua New Guinea, respectively. Additionally, utilizing time-series imagery in Group 2 as opposed to using only pre- and post-event images in Group 4 leads to F1 score improvements of 6.94% and 9.23% in Hokkaido and Papua New Guinea, respectively, confirming the effectiveness of time-series information in enhancing landslide recognition accuracy. Furthermore, employing dual-polarization strategies in Group 4 relative to single-polarization Groups 5 and 6 results in peak F1 score increases of 7.46% and 12.07% in Hokkaido and Papua New Guinea, respectively, demonstrating the feasibility of dual-polarization strategies. However, due to limitations in Sentinel-1 imagery resolution and terrain complexities, omissions and false alarms may arise near landslide edges. The improvements achieved in this study hold critical implications for landslide disaster assessment and provide valuable insights for further enhancing landslide recognition capabilities. [ABSTRACT FROM AUTHOR]

In this study, we present a novel dual-polarized patch antenna that exhibits high isolation and two in-band transmission zeros (TZs). The design consists of a suspended metal patch, two feeding probes connected to an internal neutralization line (I-NL), and a T-shaped decoupling network (T-DN). The I-NL is responsible for generating the first TZ, and its decoupling principles are explained through an equivalent circuit model. Rigorous design formulas are also derived to aid in the construction of the feeding structure. The T-DN realizes the second TZ, resulting in further improvement of the decoupling bandwidth. Simulation and experimental results show that the proposed antenna has a wide operating bandwidth (2.5–2.7 GHz), high port isolation (>30 dB), and excellent efficiency (>85%). [ABSTRACT FROM AUTHOR]

A low-profile broadband dual-polarized antenna is investigated for base station applications. It consists of two orthogonal dipoles, fork-shaped feeding lines, an artificial magnetic conductor (AMC), and parasitic strips. By utilizing the Brillouin dispersion diagram, the AMC is designed as the antenna reflector. It has a wide in-phase reflection bandwidth of 54.7% (1.54–2.70 GHz) and a surface-wave bound range of 0–2.65 GHz. This design effectively reduces the antenna profile by over 50% compared to traditional antennas without an AMC. For demonstration, a prototype is fabricated for 2G/3G/LTE base station applications. Good agreement between the simulations and measurements is observed. The measured −10-dB impedance bandwidth of our antenna is 55.4% (1.58–2.79 GHz), with a stable gain of 9.5 dBi and a high isolation of more than 30 dB across the impedance passband. As a result, this antenna is an excellent candidate for miniaturized base station antenna applications. [ABSTRACT FROM AUTHOR]

A fixed-frequency beam-scanning leaky-wave antenna (LWA) array with three switchable dual-polarized beams is proposed and experimentally demonstrated. The proposed LWA array consists of three groups of spoof surface plasmon polaritons (SPPs) LWAs with different modulation period lengths and a control circuit. Each group of SPPs LWAs can independently control the beam steering at a fixed frequency by loading varactor diodes. The proposed antenna can be configured in both multi-beam mode and single-beam mode, where the multi-beam mode with optional two or three dual-polarized beams. The beam width can be flexibly adjusted from narrow to wide by switching between multi-beam and single-beam states. The prototype of the proposed LWA array is fabricated and measured, and both simulation and experimental results show that the antenna can accomplish a fixed frequency beam scanning at an operating frequency of 3.3 to 3.8 GHz with a maximum scanning range of about 35° in multi-beam mode and about 55° in single-beam mode. It could be a promising candidate for application in the space–air–ground integrated network scenario in satellite communication and future 6G communication systems. [ABSTRACT FROM AUTHOR]

In this paper, a dual-polarized Huygens unit is proposed, which has a double-layer metallic pattern etched on both sides of one dielectric substrate. Induced magnetism enables the structure to support Huygens' resonance, thus obtaining nearly complete available transmission phase coverage. By optimizing the structural parameters, a better transmission performance can be achieved. When the Huygens metasurface was used for the design of a meta-lens, good radiation performance was exhibited, with a maximum gain of 31.15 dBi at 28 GHz, an aperture efficiency of 42.7% and a 3 dB gain bandwidth of 26.4 GHz to 30 GHz (12.86%). Due to its excellent radiation performance and very simple fabrication, this Huygens meta-lens has important applications in millimeter-wave communication systems. [ABSTRACT FROM AUTHOR]

Herein, we present new design principles for gain enhancement and cross-polarization suppression in dual-polarized cavity-backed antennas and demonstrate the capability in an octagonal cavity-backed open prism antenna (OCROP). In our approach, the gain is enhanced through an optimal flaring procedure and a novel metallic iris is used to control the electromagnetic fields and thereby reduce the cross-polarization. Previously, we investigated a dual-polarized OCROP antenna configuration and were able to simultaneously achieve 50% impedance bandwidth, 40% cross-polarization bandwidth (≤25 dB), and 10.2 dBi peak gain. In this study, we investigated gain enhancement by flaring an upper section of the ground cavity sidewalls, while maintaining a constant cavity height. Two cases were investigated: (1) the flare angle was modified, while the ratio of the non-flared to flared sidewall heights was kept constant, and (2) the ratio of the non-flared to flared sidewall heights was varied. In case 1, we established that, while increasing the flare angle results in a gain increase, there is a limit, as cross-polarization at the upper operating frequencies increases. In case 2, we were able to reduce the aperture phase error and achieve a higher peak gain of 12.8 dBi. To address the increased cross-polarization at the high frequency end when a large flare was used, we added a metallic iris at the junction of non-flared and flared sidewalls. We showed that increasing the iris width generally decreases the cross-polarization at high frequencies, without compromising the gain and impedance bandwidth. At an optimal width, it provides a nearly constant, low cross-polarization (below −25.8 dB) and a peak gain of 13.3 dBi, across the entire 50.7% impedance bandwidth of the antenna. We fabricated and successfully tested a prototype to verify the design and simulation approach. These results prove that incorporating an aperture flare with a metallic iris can significantly improve the gain and cross-polarization performance of cavity-backed antennas. [ABSTRACT FROM AUTHOR]

In this paper, a dual-polarized omnidirectional rectenna array using a hybrid power-combining scheme is proposed for the applications of RF energy harvesting. In the antenna design part, two omnidirectional antenna subarrays are created to receive horizontally polarized electromagnetic (EM) waves and a four-dipole subarray is produced to receive vertically polarized incoming EM waves. The two antenna subarrays of different polarizations are combined and optimized, so as to reduce the mutual influence between them. In this way, a dual-polarized omnidirectional antenna array is realized. In the rectifier design part, a half-wave rectifying structure is adopted for converting the RF energy into DC energy. Based on the Wilkinson power divider and 3-dB hybrid coupler structure, a power-combining network is designed to connect the whole antenna array and rectifiers. The proposed rectenna array is fabricated and measured under different RF energy harvesting scenarios. All simulated and measured results are in good agreement, which verifies the capabilities of the designed rectenna array. [ABSTRACT FROM AUTHOR]

A dual-polarized double-layer microstrip antenna with a metasurface structure is proposed for 5G and 5G Wi-Fi. A total of 4 modified patches are used for the middle layer structure, and 24 square patches are used for the top layer structure. The double-layer design has achieved −10 dB bandwidths of 64.1% (3.13 GHz~6.08 GHz) and 61.1% (3.18 GHz~5.98 GHz). The dual aperture coupling method is adopted, and the measured port isolation is more than 31 dB. A low profile of 0.096λ0 is obtained (λ0 is the wavelength of 4.58 GHz in the air) for a compact design. Broadside radiation patterns have been realized, and the measured peak gains are 11.1 dBi and 11.3 dBi for two polarizations. The antenna structure and E-field distributions are discussed to clarify its working principle. This dual-polarized double-layer antenna can accommodate 5G and 5G Wi-Fi simultaneously, which can be a competitive candidate for 5G communication systems. [ABSTRACT FROM AUTHOR]

A compact three-dimensional (3-D) metal-printed ridged waveguide slot array antenna with wideband, dual linear polarization and low cross-polarization is presented for X-band applications. The proposed design achieves a compact structure due to the method of using a ridged waveguide (RWG). A vertically linear polarized (VP) array is realized through eight longitudinal shunt slots etched on the non-ridged broad wall of the RWG, while a horizontally linear polarized (HP) array is realized through eight V-shaped slots cut on the ridged broad wall of the RWG. To extend the operating bandwidth, each 1 × 8-element linear array is separated into two 1 × 4-element sub-arrays through a central feeding technique. The two sub-arrays of the VP array are excited with equal amplitude and are 180° out-of-phase through a T-junction power divider, which connects the coaxial feed and the radiated waveguide, while the two HP subarrays are directly excited by a coaxial feed with equal amplitude and remain in phase. The feed structure uses coaxial probes directly attached to the RWG to provide good mechanical stability and low voltage around the feed. An optimized 2 × 8-element dual-polarized array is fabricated using 3-D metal-printing technology for experimental verification. The measured −10 dB impedance bandwidth of the VP array is 1.2 GHz (12.2%) and, of the HP array, is 1.1 GHz (11.2%) with maximum gains of 14.6 and 15.5 dBi, respectively. There is good polarization purity over the entire operating bandwidth with a cross-polarization level better than −40 dB in the main beam direction. The isolation between two orthogonal polarized arrays is greater than 40 dB over the whole band. [ABSTRACT FROM AUTHOR]

This study presents a novel dual-polarized magnetoelectric dipole antenna and its array with director and rectangular parasitic metal patches for LTE and 5G sub-6 GHz base station applications. This antenna is composed of L-shaped magnetic dipoles, planar electric dipoles, rectangular director, rectangular parasitic metal patches, and η-shaped feed probes. The gain and bandwidth were enhanced by using the director and parasitic metal patches. The measured impedance bandwidth of the antenna was 82.8% (1.62–3.91 GHz, VSWR < 1.5), and its gain was 10 ± 0.5 dBi. The profile of the antenna unit, operated at 1.7 GHz, was only 42 mm (0.227λ0, where λ0 represents the free space wavelength corresponding to the lowest resonance frequency point). Subsequently, four antenna units were arranged in a line array with 0.6λ0 spacing. Both the antenna and its array were fabricated and measured. The measurement results show that the array has good radiation characteristics, such as broad bandwidth covering 1.65–3.97 GHz (VSWR < 1.5), high gain (its gain was great than 15.2 dBi), and high radiation efficiency (>90%). Its HPBWs were 63° ± 4° and 15° ± 2° for H- and E-planes, respectively. The design can cover TD-LTE and 5G sub-6 GHz NR n78 frequency bands very well, meaning that this is a good candidate antenna for base station applications. [ABSTRACT FROM AUTHOR]

A non-resonant metasurface (NRMS) concept is reported in this paper to improve the isolation of dual-polarized and wideband large-scale antenna arrays. By properly designing the NRMS, it can perform stable negative permeability and positive permittivity along the tangential direction of the NRMS within a wide band, which can be fully employed to suppress the mutual couplings of large-scale antenna arrays. At the same time, the proposed NRMS can also result in positive permittivity and permeability along the normal direction of the NRMS, which guarantees the free propagation of electromagnetic waves from antenna arrays along the normal direction. For demonstration, a 4×4 dual-polarized antenna array loading with the proposed NRMS is designed to improve the isolations of the antenna array. The simulations demonstrate that the isolations among all ports are over 24 dB from 4.36 to 4.94 GHz, which are experimentally verified by the measured results. Moreover, the radiation patterns of antenna elements are still maintained after leveraging the proposed NRMS. Due to the simple structure of the proposed NRMS, it is very promising to be widely employed for massive MIMO antenna arrays. [ABSTRACT FROM AUTHOR]

A dual-band, dual-polarized filtering antenna with a cross-shaped dielectric strip resonator is proposed. The dual-band filtering radiation function is achieved by utilizing the odd and even modes of the stub loaded microstrip resonator to excite the TMδ1 and TMδ3 mode in each polarization direction of the cross-shaped dielectric strip resonator. The cross-shaped dielectric strip resonator is synthesized by the E-field distributions and the magnitude comparison along different polarization directions, which can ensure the isolation between two polarizations. Compared with dual-band filtering dielectric antennas, the proposed antenna has the characteristic of dual-polarized radiation, as well as a low profile. A prototype is fabricated and measured, which operates at 3.5 GHz and 4.9 GHz with the fractional bandwidths (FBW) of 5.40% and 2.03%, respectively, and the gains of these two bands are 6.4 dBi and 6.2 dBi, respectively. The two radiation nulls are located at 4.4 GHz and 5.1 GHz. Furthermore, the measured isolation between the two ports in the frequency band can achieve 16 dB. [ABSTRACT FROM AUTHOR]

A broadband dual-polarized base station antenna with special designed feeding structures is investigated in this paper. The proposed antenna contains two pairs of crossed dipoles, two specially designed feeding connectors, two pieces of dielectric pads, a supporter (also a balun), and a reflector. To verify the designed antenna, a prototype is fabricated and measured. The antenna attains a bandwidth of around 46.5% operating over 3.14–5.04 GHz under reflection coefficient lower than –15 dB, and the port-to-port isolation is higher than 32.5 dB. It also achieves very stable radiation patterns with half power beam widths of 71.8° ± 2.5° in both the horizontal and vertical planes and gains of around 8 dBi over its operating band. Besides, the mechanism of the obtained good performances is clearly explained from the angle of current. All of the features ensure that the proposed antenna is suitable for the fifth-generation (5G) mobile communications. [ABSTRACT FROM AUTHOR]

This paper presents a novel compact dual-band and dual-polarized complementary split-ring resonator (CSRR)-fed substrate-integrated waveguide (SIW) cavity-backed fractal patch antenna for wireless energy harvesting and communication. The proposed antenna is composed of a Giuseppe Peano fractal radiation patch with a backed SIW cavity. To enhance the bandwidth and minimize the dimensions, the CSRR structure is designed to feed the Giuseppe Peano fractal patch orthogonally. A prototype of the proposed antenna is simulated, fabricated and measured. The proposed antenna exhibits good directionality and high cross-polarization level with especially compact size. [ABSTRACT FROM AUTHOR]

A non-resonant metasurface (NRMS) concept is reported in this paper to improve the isolation of dual-polarized and wideband large-scale antenna arrays. By properly designing the NRMS, it can perform stable negative permeability and positive permittivity along the tangential direction of the NRMS within a wide band, which can be fully employed to suppress the mutual couplings of large-scale antenna arrays. At the same time, the proposed NRMS can also result in positive permittivity and permeability along the normal direction of the NRMS, which guarantees the free propagation of electromagnetic waves from antenna arrays along the normal direction. For demonstration, a 4×4 dual-polarized antenna array loading with the proposed NRMS is designed to improve the isolations of the antenna array. The simulations demonstrate that the isolations among all ports are over 24 dB from 4.36 to 4.94 GHz, which are experimentally verified by the measured results. Moreover, the radiation patterns of antenna elements are still maintained after leveraging the proposed NRMS. Due to the simple structure of the proposed NRMS, it is very promising to be widely employed for massive MIMO antenna arrays., Competing Interests: The authors declare no conflict of interest.

In this paper, a dual-polarized stacked patch antenna for wireless communication and microwave power transfer is proposed. The stacked antenna consists of four rectangular apertures that are etched on the ground plane and four identical cross-placed coupling strips that are set on the upper layer of the ground plane, which are used to excite the top-layer patches. The presented stacked patch antenna was designed as a completely symmetric structure except for the feeding network, resulting in a simple structure and the same radiation patterns for the two polarized ports. The proposed antenna operates at around 5.8 GHz, and the simulation and measured results show that it has a gain of 8.5 dBi and an isolation of 25 dB. The measured antenna efficiency of the two polarized ports at 5.85 GHz was 89.2% and 88.6%, respectively. Finally, a rectifying circuit was designed, and the maximum measured conversion efficiency of the two polarized rectenna was 63.5% and 62.7%, respectively. [ABSTRACT FROM AUTHOR]

The miniaturized high-gain antenna is required in portable, ultra-wideband radar systems. However, the miniaturization, ultra-wideband and high gain often restrict each other in the antenna design. In this paper, a dual-polarized, double-slot, antipodal tapered slot antenna with a double-layer, dual-loop structure and novel slot edges is presented. The proposed magnetic dual-loop structure has the capacity to reduce the low cut-off frequency of the double-slot tapered slot antenna by weakening the resonance and coupling. In addition, the high gain, low sidelobe level (SLL), and low cross-polarization level are achieved in the boresight direction. A novel gradient slot profile is designed to improve the low-frequency directivity of the tapered slot antenna without affecting the matching. To feed the antenna elements, a kind of wideband, balun-divider structure is designed. The dual-polarized antenna is combined by two orthogonal elements in a cross configuration without galvanic contact or influence to performance. The measured results show that the impedance bandwidth of the proposed antenna is 0.6~4 GHz, and the maximum gain is 11 dBi. The isolation between the two antenna ports is better than 32 dB, and the cross-polarization discrimination (XPD) is better than 20 dB. [ABSTRACT FROM AUTHOR]

To increase the data capacity of a light-emitting diode (LED) based visible light communication (VLC) transmission, a polarization-division-multiplexing (PMD) green (G)- and blue (B)- light-based transmitter (Tx) module is demonstrated here. It was demonstrated that we can achieve 1200 and 1120 Mbps VLC capacities based on dual-polarized G- and a B-LED based light wave after 3 and 4 m free-space link lengths, respectively, at exceedingly low illuminance. Based on the presented VLC system, paired G-LEDs or B-LEDs with dual-polarization can also be applied on the VLC-Tx side for doubling and delivering VLC data. According to the obtained results, the largest polarization offset angle of 50° between two polarizers (POLs) can be allowed experimentally to provide optimal VLC traffic. Moreover, the relationships of polarization offset, the illuminance of LED and maximum achieved VLC capacity are also performed and analyzed. [ABSTRACT FROM AUTHOR]

A broadband differential-fed dual-polarized hollow cylindrical dielectric resonator antenna (DRA) is proposed in this article. It makes use of the HEM111, HEM113, and HEM115 modes of the cylindrical hollow DRA. The proposed DRA is simply fed by two pairs of conducting strips and each pair of strips is provided with the out-of-phase signals. After introducing four disconnected air holes into the DRA, a broadband characteristic is achieved, with little effect on the antenna gain of its higher-order modes. To verify this idea, frosted K9-glass is applied to fabricate the hollow cylindrical DRA. The differential S-parameters, radiation patterns, and antenna gain of the DRA are studied. It is found that the proposed differential-fed dual-polarized DRA is able to provide a broad differential impedance bandwidth of ~68% and a high differential-port isolation better than ~46 dB. Moreover, symmetrical broadside radiation patterns are observed across the whole operating band. The proposed DRA covers the frequency bands including the 5G-n77 (3.4–4.2 GHz), 5G-n79 (4.4–5.0 GHz), WLAN-5.2 GHz (5.15–5.35 GHz), and WLAN-5.8 GHz (5.725–5.825 GHz), which can be used for 5G communications. [ABSTRACT FROM AUTHOR]

A novel dual-polarized transmissive/absorptive frequency-selective rasorber (FSR) with an ultrawide absorption spectrum covering both the X- and Ku-bands is proposed in this paper. The FSR is constructed from a bottom lossless transmission layer and a top lossy absorption layer, in which a resistor-loaded incurved square loop strip line structure is utilized to obtain an ultrawide absorption band. To quantitatively analyze its operation principle, an accurate equivalent circuit model of the proposed FSR was developed. A 2D prototype was designed, assembled, fabricated, and measured. The FSR exhibits an absorption band that ranges from 8.1 to 19.1 GHz (81%) under normal incidence, whereas the passband insertion loss at 4.5 GHz is less than 0.45 dB. The total thickness of the FSR is only 5.1 mm, which keeps low profile characteristics. The simulation agrees well with the measured results. [ABSTRACT FROM AUTHOR]

A novel and compact dual-polarized (DP) chipless radio-frequency identification (RFID) tag is presented in this paper. This tag can read both vertical and horizontal orientations within its frequency band, which improves the robustness and detection capability of the RFID system. The proposed tag makes use of the slot length variation encoding technique to improve the encoding capacity. This technique can duplicate the encoding capacity, thereby reducing the overall tag size by almost 50%. In particular, the proposed tag has an encoding capacity of 20 bits in the 3–8 GHz frequency band and achieves data density of around 15.15 bits/cm2. Three prototypes are fabricated and tested outside an anechoic chamber. Furthermore, one tag is tested at different distances (10 cm, 30 cm, and 60 cm) from the reader and the measured results are compared. The simulated and measured results are in reasonable agreement, with acceptable shifts at some frequencies due to fabrication and experimental errors. [ABSTRACT FROM AUTHOR]

A broadband dual-polarized base station antenna with special designed feeding structures is investigated in this paper. The proposed antenna contains two pairs of crossed dipoles, two specially designed feeding connectors, two pieces of dielectric pads, a supporter (also a balun), and a reflector. To verify the designed antenna, a prototype is fabricated and measured. The antenna attains a bandwidth of around 46.5% operating over 3.14⁻5.04 GHz under reflection coefficient lower than -15 dB, and the port-to-port isolation is higher than 32.5 dB. It also achieves very stable radiation patterns with half power beam widths of 71.8° ± 2.5° in both the horizontal and vertical planes and gains of around 8 dBi over its operating band. Besides, the mechanism of the obtained good performances is clearly explained from the angle of current. All of the features ensure that the proposed antenna is suitable for the fifth-generation (5G) mobile communications.

This paper presents a novel compact dual-band and dual-polarized complementary split-ring resonator (CSRR)-fed substrate-integrated waveguide (SIW) cavity-backed fractal patch antenna for wireless energy harvesting and communication. The proposed antenna is composed of a Giuseppe Peano fractal radiation patch with a backed SIW cavity. To enhance the bandwidth and minimize the dimensions, the CSRR structure is designed to feed the Giuseppe Peano fractal patch orthogonally. A prototype of the proposed antenna is simulated, fabricated and measured. The proposed antenna exhibits good directionality and high cross-polarization level with especially compact size.