Search

The present work describes the development of a hybrid and pH-responsive system for rifampicin using the clay mineral 'montmorillonite' as a nanocarrier. The influence of operational variables on the drug incorporation process was evaluated using 2 4 factorial designs. Under optimized conditions, the experiment allowed an incorporated drug dose equivalent to 98.60 ± 1.21 mg/g. Hybrid systems were characterized by different characterization techniques (FTIR, XRD, TGA, DSC, and SEM) to elucidate the mechanism of interaction between the compounds used. Through in vitro release studies, it was possible to verify the efficacy of the pH-dependent system obtained, with approximately 70% of the drug released after sixteen hours in simulated intestinal fluid. The adjustment of the experimental release data to the theoretical model of Higuchi and Korsmeyer-Peppas indicated that the release of rifampicin occurs in a prolonged form from montmorillonite. Elucidation of the interactions between the drug and this raw clay reinforces its viability as a novel carrier to develop an anti-TB/clay hybrid system with good physical and chemical stability.

In this study, for the first time, the production of green hydrogen gas (H 2 ) in the cathodic compartment, in concomitance with the electrochemical oxidation (EO) of an aqueous solution containing Calcon dye at the anodic compartment, was studied in a PEM-type electrochemical cell driven by a photovoltaic (PV) energy source. EO of Calcon was carried out on a Nb/BDD anode at different current densities (7.5, 15 and 30 mA cm -2 ), while a stainless steel (SS) cathode was used for green H 2 production. The results of the analysis by UV-vis spectroscopy and total organic carbon (TOC) clearly showed that the electrochemical oxidation (EO) of the Calcon dye after 180 min of electrolysis time by applying 30 mA cm -2 reached up to 90% of degradation and 57% of TOC removal. Meanwhile, under these experimental conditions, a green H 2 production greater than 0.9 L was achieved, with a Faradaic efficiency of 98%. The hybrid electrolysis strategy is particularly attractive in the context of a circular economy, as these can be coupled with the use of more complex water matrices to transform organic depollution into an energy resource to produce H 2 as a chemical energy carrier.

The objective of this study was to evaluate the Calotropis procera fiber treated with NaOH combined with heat treatment as sorbent material for removal of petroleum and derivatives in cases of oil spill. The effects of oil viscosity, fiber/oil contact time, and the type of sorption system (oil and oil/water) were evaluated by experimental planning. The fiber obtained was characterized by Fourier transform infrared spectroscopy (FTIR), field-emission scanning electron microscopy (SEM-FEG), thermogravimetric analysis (TG/DTG), contact angle, and wettability. The fiber treated by combining NaOH and heat treatment (CPNaOHT) exhibited a large structure with an internal diameter of 42.99 ± 3.98 μm, roughness, and hydrophobicity on the surface with a contact angle of 101 ± 2°. The sorption capacity of oil ranged from 190.32 g/g to 98.9 g/g. After five cycles of recycling, the fiber still maintains about 70% of its initial sorption capacity and presented low liquid desorption (0.25 g). In this way, it can be used as an efficient sorbent to clean up spills of oil and oil products.

This study aims to investigate the applicability of a hybrid electrochemical sensor composed of cork and graphite (Gr) for detecting caffeine in aqueous solutions. Raw cork (RAC) and regranulated cork (RGC, obtained by thermal treatment of RAC with steam at 380 °C) were tested as modifiers. The results clearly showed that the cork-graphite sensors, GrRAC and GrRGC, exhibited a linear response over a wide range of caffeine concentration (5-1000 µM), with R 2 of 0.99 and 0.98, respectively. The limits of detection (LOD), estimated at 2.9 and 6.1 µM for GrRAC and GrRGC, suggest greater sensitivity and reproducibility than the unmodified conventional graphite sensor. The low-cost cork-graphite sensors were successfully applied in the determination of caffeine in soft drinks and pharmaceutical formulations, presenting well-defined current signals when analyzing real samples. When comparing electrochemical determinations and high performance liquid chromatography measurements, no significant differences were observed (mean accuracy 3.0%), highlighting the potential use of these sensors to determine caffeine in different samples.

Wastewater from the oil industry is a major problem for aqueous environments due to its complexity and estimated volume of approximately 250 million barrels per day. The combination of these petroleum pollutants creates risks to human health, and their removal from the environment is considered a major problem in the world today. Thus, this work has the objective of studying the treatment of this type of effluent through the adsorption method using the following exchange materials: cationic, anionic, their combination by a sequential method, and a composite material. Zeolite A, a layered double hydroxide (LDH), and the new composite material formed by zeolite A and LDH structures were synthesized for this study. All were used for the simultaneous treatment of cations and anions in a complex sample such as water produced from petroleum production. The composite demonstrated an excellent ability to simultaneously remove cations and anions. The results obtained after the different treatment modes of the effluent using different materials varied from 85% to 100% for the removal of cations and from 56% to 99.7% for the removal of anions.

Glomus tumors are soft tissue neoplasms, which are most frequently encountered in the nail unit and generally straightforward to diagnose by histopathology. The typical clinical presentation is that of a circular violaceous or erythematous lesion within the nail bed. However, there are rare variants of glomus tumors which may pose diagnostic challenges because of the presence of unusual histologic features. Herein we report such a glomus tumor that demonstrates the rare combination of both myxoid and symplastic change. The clinical presentation of longitudinal erythronychia, as seen with this case, can occur with glomus tumors, but it is unusual, as longitudinal erythronychia on a single nail usually is caused by an onychopapilloma. The distinct nuclear atypia characteristic of symplastic change can raise alarm for a malignant process but the clinical course is benign. It is essential for dermatopathologists to be aware of this unusual variant of a glomus tumor in order to avoid overdiagnosis of atypia, which could result in unnecessary aggressive surgery. While unusual, there is good clinicopathologic correlation of the glomus tumor presenting with longitudinal erythronychia.